Electromagnetic wave absorption in reduced graphene oxide functionalized with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Fe nanorings

We report the preparation of nanocomposites of reduced graphene oxide with embedded Fe₃O₄/Fe nanorings (FeNR@rGO) by chemical hydrothermal growth. We illustrate the use of these nanocomposites as novel electromagnetic wave absorbing materials. The electromagnetic wave absorption properties of the nanocomposites with different compositions were investigated. The preparation procedure and nanocomposite composition were optimized to achieve the best electromagnetic wave absorption properties. Nanocomposites with a GO:α-Fe₂O₃ mass ratio of 1:1 prepared by annealing in H₂/Ar for 3 h exhibited the best properties. This nanocomposite sample (thickness = 4.0 mm) showed a minimum reflectivity of–23.09 dB at 9.16 GHz. The band range was 7.4–11.3 GHz when the reflectivity was less than–10 dB and the spectrum width was up to 3.9 GHz. These figures of merit are typically of the same order of magnitude when compared to the values shown by traditional ferric oxide materials. However, FeNR@rGO can be readily applied as a microwave absorbing material because the production method we propose is highly compatible with mass production standards.

Open image in new window

     

Effects of sodium oleate on synthesis and photocatalytic activity of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>@RGO

In this study, the effects of sodium oleate on synthesis of Bi₂WO₆/Bi₂O₃ loaded reduced graphene oxide photocatalyst was studied. The as-prepared composites were characterized by X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, UV–visible diffuse reflectance and photoluminescence spectroscopy. The results suggested that addition of sodium oleate not only promoted synthesis of Bi₂O₃, but also enhanced the reduction of GO to graphene. When the amount of sodium oleate was 4 mol (Bi:SO?=?1:1), Bi₂WO₆/Bi₂O₃@RGO to the best visible-light photocatalytic activity can be synthesized by a facile one-step solvothermal process without further reduction reaction. Hence, it indicated that sodium oleate could affect the synthesis of the as-prepared composites and the photocatalytic activity for degradation of RhB. This study did provide not only a facile method to synthesize Bi₂WO₆/Bi₂O₃@RGO, but also a method to reduce graphene oxide to graphene.     

2D sandwich-like sheets of iron oxide grown on graphene as high energy anode material for supercapacitors

2D sandwich-like sheets of iron oxide grown on graphene as high energy anode material for supercapacitors are prepared from the direct growth of FeOOH nanorods on the surface of graphene and the subsequent electrochemical transformation of FeOOH to Fe(3)O(4). The Fe(3)O(4) @RGO nanocomposites exhibit superior capacitance (326 F g(-1)), high energy density (85 Wh kg(-1)), large power, and good cycling performance in 1 mol L(-1) LiOH solution.     

TiO<Subscript>2</Subscript> nanocrystals grown on graphene as advanced photocatalytic hybrid materials

A graphene/TiO₂ nanocrystals hybrid has been successfully prepared by directly growing TiO₂ nanocrystals on graphene oxide (GO) sheets. The direct growth of the nanocrystals on GO sheets was achieved by a two-step method, in which TiO₂ was first coated on GO sheets by hydrolysis and crystallized into anatase nanocrystals by hydrothermal treatment in the second step. Slow hydrolysis induced by the use of EtOH/H₂O mixed solvent and addition of H₂SO₄ facilitates the selective growth of TiO₂ on GO and suppresses growth of free TiO₂ in solution. The method offers easy access to the GO/TiO₂ nanocrystals hybrid with a uniform coating and strong interactions between TiO₂ and the underlying GO sheets. The strong coupling gives advanced hybrid materials with various applications including photocatalysis. The prepared graphene/TiO₂ nanocrystals hybrid has superior photocatalytic activity to other TiO₂ materials in the degradation of rhodamine B, showing an impressive three-fold photocatalytic enhancement over P25. It is expected that the hybrid material could also be promising for various other applications including lithium ion batteries, where strong electrical coupling to TiO₂ nanoparticles is essential.     

Thermal and electrical conductivity of Al(OH)<Subscript>3</Subscript> covered graphene oxide nanosheet/epoxy composites

Al(OH)₃ functionalized graphene composites (Al–GO) were prepared using a simple sol–gel method. In this protocol, graphene oxide (GO) was prepared according to the Hummers method and functionalized to enhance its reactivity with aluminum isopropoxide by a LiAlH₄ treatment. The functionalized graphene sheets were characterized by X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. These analyses confirmed that GO had been fabricated and the Al(OH)₃ layer could have a homogeneous distribution with large and dense coverage onto GO sheets. In addition, the thermal and electrical conductivity of the epoxy composites with GO and Al–GO fillers were measured. The thermal conductivities of the composites with graphene-based fillers were enhanced by the addition of fillers. In particular, the thermal conductivity of GO/epoxy composite containing 3 wt% was approximately two times higher than that of pure epoxy resin. In addition, the electrical conductivity of Al–GO embedded composites degenerated compared to GO composites.     

A sensitive electrochemical detection of hydroquinone using newly synthesized α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-graphene oxide nanocomposite as an electrode material

This article presents the effect of hematite phase iron oxide (α-Fe₂O₃) on the electrocatalytic activity of graphene oxide (GO) for electrochemical detection of hydroquinone in aqueous solution. The different weight percentage (wt%) (1, 2 and 3%) of α-Fe₂O₃ added GO nanocomposites were synthesized by wet-impregnation method. The cyclic voltammetry studies using 2% α-Fe₂O₃-GO modified glassy carbon electrodes was found to exhibit an excellent electrocatalytic activity than α-Fe₂O₃ and GO electrodes that may be due to the synergistic effect of α-Fe₂O₃nanoparicles and GO sheet. In addition, the modified electrode exhibited a good reproducibility as well as long-term stability. Hence, the 2% α-Fe₂O₃-GO can be a promising catalytic material for electrochemical sensor applications.     

Synthesis of well-defined Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods/N-doped graphene for lithium-ion batteries

The geometric size and distribution of magnetic nanoparticles are critical to the morphology of graphene (GN) nanocomposites, and thus they can affect the capacity and cycling performance when these composites are used as anode materials in lithium-ion batteries (LiBs). In this work, Fe₃O₄ nanorods were deposited onto fully extended nitrogen-doped GN sheets from a binary precursor in two steps, a hydrothermal process and an annealing process. This route effectively tuned the Fe₃O₄ nanorod size distribution and prevented their aggregation. The transformation of the binary precursor was characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). XPS analysis indicated the presence of N-doped GN sheets, and that the magnetic nanocrystals were anchored and uniformly distributed on the surface of the flattened N-doped GN sheets. As a high performance anode material, the structure was beneficial for electron transport and exchange, resulting in a large reversible capacity of 929 mA·h·g^–1, high-rate capability, improved cycling stability, and higher electrical conductivity. Not only does the result provide a strategy for extending GN composites for use as LiB anode materials, but it also offers a route for the preparation of other oxide nanorods from binary precursors.

Open image in new window

     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window

     

Defects Induced Magnetism in WO<Subscript>3</Subscript> and Reduced Graphene Oxide-WO<Subscript>3</Subscript> Nanocomposites

A series of reduced graphene oxide (rGO)-WO₃ nanocomposites were prepared by hydrothermal method using GO and tungsten complex. The nanocomposites were characterized by powder XRD, Raman spectroscopy, FT-IR spectroscopy, HRTEM, XPS, photoluminescence (PL), and magnetic studies. The structural analysis confirms the hexagonal crystal structure and formation of rGO-WO₃ nanocomposites. HRTEM images show rod-like shape WO₃ distributed on the wrinkle structure of rGO sheets. XPS results confirm the oxidation state and oxygen vacancies present in the samples. PL spectra of the samples show blue emission and indicate the existence of surface defects and oxygen vacancies. The M–H loop of rGO-WO₃ nanocomposites reveal that the co-existence of both ferro and antiferromagnetism at room temperature. The incorporation of rGO sheets notably increase magnetic behavior of composites due to extended C–C bond conducts much stronger coupling between the 5d and 6s orbitals of tungsten and carbon atoms.     

Superparamagnetic magnetite nanocrystals-graphene oxide nanocomposites: facile synthesis and their enhanced electric double-layer capacitor performance

Superparamagnetic magnetite nanocrystals-graphene oxide (FGO) nanocomposites were successfully synthesized through a simple yet versatile one-step solution-processed approach at ambient conditions. Magnetite (Fe3O4) nanocrystals (NCs) with a size of 10-50 nm were uniformly deposited on the surfaces of graphene oxide (GO) sheets, which were confirmed by transmission electron microscopy (TEM) and high-angle annular dark field scanning transmission election microscopy (HAADF-STEM) studies. FGO with different Fe3O4 loadings could be controlled by simply manipulating the initial weight ratio of the precursors. The M-H measurements suggested that the as-prepared FGO nanocomposites have a large saturation magnetizations that made them can move regularly under an external magnetic field. Significantly, FGO nanocomposites also exhibit enhanced electric double-layer capacitor (EDLC) activity compared with pure Fe3O4 NCs and GO in terms of specific capacitance and high-rate charge-discharge.     

Synthesis and microwave absorption properties of sandwich-type CNTs/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/RGO composite with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a bridge

A novel sandwich-type CNTs/Fe₃O₄/RGO composite with Fe₃O₄ as a bridge was successfully prepared through a simple solvent-thermal and ultrasonic method. The structure and morphology of the composite have been characterized by Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. This new structure can effectively prevent the agglomeration of GO and the combination of CNTs/Fe₃O₄ and RGO shows a strong reflection loss (R_L) (?50 dB) at 8.7 GHz with absorber thickness of 2.5 mm. Moreover, compared with CNTs/Fe₃O₄/GO composite, it is found that the thermal treating process is beneficial to enhance the microwave absorption properties, which may be attributed to high conductivity of RGO. On this basis, the microwave absorbing mechanism is systematically discussed. All the data show that the CNTs/Fe₃O₄/RGO composite exhibits excellent microwave absorption properties with light density and is expected to have potential applications in microwave absorption.     

Fast microwave synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag magnetic nanoparticles using Fe<Superscript>2+</Superscript> as precursor

A simple and quick microwave method to prepare high performance magnetite nanoparticles (Fe₃O₄ NPs) directly from Fe has been developed. The as-prepared Fe₃O₄ NPs product was fully characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The results show that the as-prepared Fe₃O₄ NPs are quite monodisperse with an average core size of 80 × 5 nm. The microwave synthesis technique can be easily modified to prepare Fe₃O₄/Ag NPs and these NPs possess good magnetic properties. The formation mechanisms of the NPs are also discussed. Our proposed synthesis procedure is quick and simple, and shows potential for large-scale production and applications for catalysis and biomedical/biological uses.     

Solvothermal synthesis and characterization of size-controlled monodisperse Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles

Monodisperse Fe₃O₄ nanoparticles with narrow size distribution could be successfully synthesized in large quantities by a facile solvothermal synthetic method in the presence of oleic acid and oleylamine. Well-defined assembly of uniform nanoparticles with average sizes of 8 nm can be obtained without a further size-selection process. The sizes of final products could be readily tuned from 5 to 12 nm by adjusting the experimental parameters such as reaction time, temperature, and surfactants. The phase structures, morphologies, and magnetic properties of the as-prepared products were investigated in detail by X-ray diffraction, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, and magnetometry with a superconducting quantum interference device. The magnetic study reveals that the as-synthesized nanoparticles are ferromagnetic at 2 K while they are superparamagnetic at 300 K.     

Catalase-imprinted Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Fe@fibrous SiO<Subscript>2</Subscript>/polydopamine nanoparticles: An integrated nanoplatform of magnetic targeting,magnetic resonance imaging,and dual-mode cancer therapy

Recent advances in the research on the molecular mechanism of cell death and methods for preparation of nanomaterials make the integration of various therapeutic approaches,targeting,and imaging modes into a single nanoscale complex a new trend for the development of future nanotherapeutics.Hence,a novel ellipsoidal composite nanoplatform composed of a magnetic Fe3O4/Fe nanorod core (～120 nm) enwrapped by a catalase (CAT)-imprinted fibrous SiO2/ polydopamine (F-SiO2/PDA) shell with thickness 70 nm was prepared in this work.In vitro experiments showed that the Fe3O4/Fe@F-SiO2/PDA nanoparticles can selectively inhibit the bioactivity of CAT in tumor cells by the molecular imprinting technique.As a result,the H2O2 level in tumor cells was elevated dramatically.At the same time,the Fe3O4/Fe core released Fe ions to catalyze the conversion of H2O2 to ·OH in tumor cells.Eventually,the concentration of ·OH in tumor cells rapidly rose to a lethal level thus triggering apoptosis.Combined with the remarkable near-infrared light (NIR) photothermal effect of the CATimprinted PDA layer,the Fe3O4/Fe@F-SiO2/PDA nanoparticles can effectively kill MCF-7,HeLa,and 293T tumor cells but are not toxic to nontumor cells.Furthermore,these nanoparticles show good capacity for magnetic targeting and suitability for magnetic resonance imaging (MRI).Therefore,the integrated multifunctional nanoplatform opens up new possibilities for high-efficiency visual targeted nonchemo therapy for cancer.     

Mn-doped Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> nanocrystal with enhanced electrochemical properties based on aerosol synthesis method

Mn-doped Li₃V_2?x Mn _x (PO₄)₃ nanocrystals with enhanced electrochemical properties for lithium-ion batteries were synthesized by aerosol process successfully. The nanocrystals synthesized from aerosol-assisted spray process have an average particle size smaller than 500 nm, with some initial particle size of about 100 nm. The Mn-doped Li₃V₂(PO₄)₃ cathode materials show higher capacity and coulombic efficiency than pure Li₃V₂(PO₄)₃ materials. Especially, the Mn-doped Li₃V_1.94Mn_0.06(PO₄)₃ shows a capacity of 130 mAh/g in the voltage range of 3.0–4.4 V and a coulombic efficiency of 99.5 % at 1C. The results from XRD, SEM, HRTEM, and EIS suggested that lattice changes of Li₃V₂(PO₄)₃ due to Mn doping and the fine particles enabled by aerosol-assisted spray process can significantly reduce the charge-transfer resistance and improve the apparent Li⁺ diffusion coefficient of insertion/desertion in the electrodes, which were the critical reason of better electrochemical performance of Mn-doped Li₃V₂(PO₄)₃ cathode materials.     

Samarium-doped Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles with improved magnetic and supercapacitive performance: a novel preparation strategy and characterization

Sm³⁺-doped magnetite (Fe₃O₄) nanoparticles were synthesized through a one-pot facile electrochemical method. In this method, products were electrodeposited on a stainless steel (316L) cathode from an additive-free 0.005 M Fe(NO₃)₃/FeCl₂/SmCl₃ aqueous electrolyte. The structural characterizations through X-ray diffraction, field-emission electron microscopy, and energy-dispersive X-ray indicated that the deposited material has Sm³⁺-doped magnetite particles with average size of 20 nm. Magnetic analysis by VSM revealed the superparamagnetic nature of the prepared nanoparticles (Ms = 41.89 emu g^?1, Mr = 0.12 emu g^?1, and H _Ci = 2.24 G). The supercapacitive capability evaluation of the prepared magnetite nanoparticles through cyclic voltammetry and galvanostat charge–discharge showed that these materials are capable to deliver specific capacitances as high as 207 F g^?1 (at 0.5 A g^?1) and 145 F g^?1 (at 2 A g^?1), and capacity retentions of 94.5 and 84.6% after 2000 cycling at 0.5 and 1 A g^?1, respectively. The results proved the suitability of the electrosynthesized nanoparticles for use in supercapacitors. Furthermore, this work provides a facile electrochemical route for the synthesis of lanthanide-doped magnetite nanoparticles.     

Dual-mode protein detection based on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-Au hybrid nanoparticles

A facile method of synthesizing Fe₃O₄-Au hybrid nanoparticles is reported utilizing the multifunctional nature of polyethyleneimine (PEI). An abundance of 5 nm gold nanoparticles were attached to 50 nm Fe₃O₄ nanoparticles via the covalent binding between the -NH₂ groups of the PEI and Au nanoparticles, as well as the electrostatic interaction between the negatively charged citrate-coated Au nanoparticles and the positively charged PEI-coated Fe₃O₄ nanoparticles. The as-prepared Fe₃O₄-Au hybrid nanoparticles, which combine the merits of magnetic materials and gold, were successfully employed for the first time in the dual-mode detection of carcinoembryonic antigen (CEA) via electrochemical and surface-enhanced Raman scattering (SERS) methods. Both methods make clever use of Fe₃O₄-Au nanoparticles and can accurately verify the presence of antigens. In particular, the electrochemical immunosensor detection displays a wide linear range (0.01–10 ng/mL) of response with a low detection limit (10 pg/mL), while the SERS method responds to even lower antigen concentrations with a wider detection range. The Fe₃O₄-Au hybrid nanoparticles therefore exhibit great potential for biomedical applications.      

Light weight RGO/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite for efficient electromagnetic absorption coating in X-band

Reduced graphene oxide (RGO)/magnetite (Fe₃O₄) nanocomposite has been synthesized by an in-situ facile hydrothermal method. The XRD pattern reveals the development of nanocomposite in which both phases are coexistent. Raman Spectroscopy shows the main characteristics peaks of D and G bands at 1349 cm^?1 and 1595 cm^?1 for graphitic structures. The intensity ratio (I_D/I_G) is also calculated, which indicate the degree of defects in the material. This ratio (I_D/I_G), increases from 0.84 for GO to 0.91 for RGO/Fe₃O₄ nanocomposite and promotes the defects which are beneficial for electromagnetic (EM) absorption. The SEM image depicts that, Fe₃O₄ spherical nanoparticles are dispersed over the surface of graphene sheets and provide a thermal conducting path for heat dissipation between different layers of graphene. The EM absorption properties have been analyzed at 2–18 GHz of RGO and RGO/Fe₃O₄. The addition of proper content of Fe₃O₄ magnetic nanoparticles in RGO sheets improved the Reflection Loss (RL) from ??13.5 dB to ??20 dB at a frequency of 9.5 GHz. Moreover, due to magnetic loss and interfacial polarization, the effective bandwidth increases from 2.5 GHz to 3.8 GHz at a coating thickness of 1.5 mm. Hence this light weight nanocomposite is an excellent material for strong EM absorption in X-band.     

Synthesis of graphene oxide/Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite with enhanced visible-light photocatalytic activity

The nano-scale Ag₃PO₄ was successfully synthesized by the silver ammonia complexing precipitation method at room temperature. And the Graphene oxide (GO)/Ag₃PO₄ nanocomposites with different contents of GO were successfully synthesized using the electrostatic driving method. The as-prepared GO/Ag₃PO₄ nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), confirming that Ag₃PO₄ were highly dispersed to GO sheet. The photocatalytic properties of GO/Ag₃PO₄ were evaluated by the degradation of Methyl Orange (MO) under visible light irradiation and solar irradiation respectively. The results showed that the photocatalytic efficiencies of GO/Ag₃PO₄ nanocomposites had enhanced largely and the kinetics reaction models were followed first-order. Furthermore, 5% GO/Ag₃PO₄ exhibited the highest photocatalytic activity on degradation of MO under visible-light irradiation. The improved photocatalytic performances of the GO/Ag₃PO₄ nanocomposites mainly attributed to the introducing of GO, which benefit for electron transfer and inhibit the recombination of electron–hole pairs, promoting the practical application of Ag₃PO₄ in water purification.     

Particle size dependence of optical and defect parameters in mechanically milled Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Fe₂O₃ of particle sizes ranging from 120 to 20 nm has been prepared by the ball-milling process using different milling hour. X-ray diffraction technique and transmission electron microscopy have been used for determining the average particle sizes of the prepared samples. Direct optical band gap for the unmilled and the ball-milled samples has been calculated from the optical absorption data. A red shift in the band gap due to the reduction of particle size has been observed. The coincidence Doppler broadening of the electron positron annihilation γ-radiation spectroscopy has been employed to identify the nature of defects generated due to the ball-milling process.