静电纺丝法制备PAN/Fe3O4磁性纳米纤维

采用化学共沉淀法制备纳米四氧化三铁,选用曲拉通X-100为分散剂,利用静电纺丝法制备PAN/Fe3O4磁性纳米复合材料。X射线衍射仪(XRD)验证了四氧化三铁在复合纳米纤维中的存在。同时使用扫描电镜(SEM)和透射电镜(TEM)对复合纳米纤维的微观形貌和Fe3O4在纤维中的分布进行了观察,利用热重(TGA)对纳米复合材料的热稳定性进行分析;通过磁性实验分析了纳米复合材料的磁性性能。结果表明,所制备PAN/Fe3O4磁性纳米纤维成型良好,且Fe3O4磁性颗粒在纤维中分散均匀,其与PAN是物理复合。纳米复合材料具有一定磁性,并可由磁性颗粒的加入量进行控制。     

An efficientfficient,controllable and facile two-step synthesis strategy: Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@RGO composites with various Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and their supercapacitance properties

An efficient,controllable,and facile two-step synthetic strategy to prepare graphene-based nanocomposites is proposed.A series of Fe3O4-decorated reduced graphene oxide (Fe3O4@RGO) nanocomposites incorporating Fe3O4 nanocrystals of various sizes were prepared by an ethanothermal method using graphene oxide (GO) and monodisperse Fe3O4 nanocrystals with diameters ranging from 4 to 10 nm.The morphologies and microstructures of the as-prepared composites were characterized by X-ray diffraction,Raman spectroscopy,nitrogen adsorption measurements,and transmission electron microscopy.The results show that GO can be reduced to graphene during the ethanothermal process,and that the Fe3O4 nanocrystals are well dispersed on the graphene sheets generated in the process.The analysis of the electrochemical properties of the Fe3O4@RGO materials shows that nanocomposites prepared with Fe3O4 nanocrystals of different sizes exhibit different electrochemical performances.Among all samples,Fe3O4@RGO prepared with Fe3O4 nanocrystals of 6 nm diameter possessed the highest specific capacitance of 481 F/g at 1 A/g,highlighting the excellent capability of this material.This work illustrates a promising route to develop graphene-based nanocomposite materials with a wide range of potential applications.     

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag composite magnetic nanoparticles

Fe₃O₄ magnetic nanoparticles being used as seeding materials, Ag⁺ ions on the Fe₃O₄ magnetic nanoparticles reduced to the metal form by tartaric acid using heated treatment. Thus, Fe₃O₄/Ag composite core-shell magnetic nanoparticles were synthesized. The products were characterized by transmission electron microscope (TEM) and x-ray diffraction (XRD). Both TEM and XRD results showed that the Ag nanoparticles were well distributed on the surface of Fe₃O₄ magnetic nanoparticles. The size for Fe₃O₄/Ag composite magnetic nanoparticles which were spherical shape was ≃40 nm. Furthermore, the magnetic properties of samples were characterized on a vibrating sample magnetometer. Under optimal conditions, Fe₃O₄/Ag composite nanoparticles showed higher magnetism than pure Fe₃O₄ nanoparticles. The text was submitted by the authors in English.     

Synthesis and characterization of SiO2/(PMMA/Fe3O4) magnetic nanocomposites

Magnetic silica nanocomposites (magnetic nanoparticles core coated by silica shell) have the wide promising applications in the biomedical field and usually been prepared based on the famous St?ber process. However, the flocculation of Fe3O4 nanoparticles easily occurs during the silica coating, which limits the amount of magnetic silica particles produced in the St?ber process. In this paper, PMMA/Fe3O4 nanoparticles were used in the St?ber process instead of the "nude" Fe3O4 nanoparticles. And coating Fe3O4 with PMMA polymer beforehand can prevent magnetic nanoparticles from the aggregation that usually comes from the increasing of ionic strength during the hydrolyzation of tetraethoxysilane (TEOS) by the steric hindrance. The results show that the critical concentration of magnetic nanoparticles can increase from 12 mg/L for "nude" Fe3O4 nanoparticles to 3 g/L for PMMA/Fe3O4 nanoparticles during the St?ber process. And before the deposition of silica shell, the surface of PMMA/FeO4 nanoparticles had to be further modified by hydrolyzing them in CH3OH/NH3 x H2O mixture solution, which provides the carboxyl groups on their surface to react further with the silanol groups of silicic acid.     

Fast microwave synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag magnetic nanoparticles using Fe<Superscript>2+</Superscript> as precursor

A simple and quick microwave method to prepare high performance magnetite nanoparticles (Fe₃O₄ NPs) directly from Fe has been developed. The as-prepared Fe₃O₄ NPs product was fully characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The results show that the as-prepared Fe₃O₄ NPs are quite monodisperse with an average core size of 80 × 5 nm. The microwave synthesis technique can be easily modified to prepare Fe₃O₄/Ag NPs and these NPs possess good magnetic properties. The formation mechanisms of the NPs are also discussed. Our proposed synthesis procedure is quick and simple, and shows potential for large-scale production and applications for catalysis and biomedical/biological uses.     

利用正交试验讨论工艺条件对Fe3O4纳米颗粒磁性的影响

利用正交实验探索了化学共沉淀法制备Fe3O4纳米颗粒的影响因素:[Fe3+];[Fe3+]:[Fe2+];氨水用量倍数;乙醇浓度;晶化时间;晶化温度等参数对Fe3O4纳米颗粒饱和磁化强度和均匀性等性能的影响.通过对极差分析找出了在试验条件范围内Fe3O4粉末的饱和磁化强度达到最大值的工艺条件,即D3A3F4B3E5C4:[Fe3+]=0.1mol/L;合成温度60℃;NH4OH用量倍数=2;晶化时间30min;[Fe2+]:[Fe3+]=0.7;乙醇质量分数16%此论文的工作是为本实验室将要使用的磁性液体自动化制备系统的运用做前期准备.同时也是为本实验室相关项目的磁性液体的制备提供参考.     

Pt/Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Eu<Superscript>3+</Superscript> composite nanotubes: Enhanced photoluminescence and application in dye-sensitized solar cells

Y(OH)3:Eu3+ nanotubes were synthesized using a facile hydrothermal method,and then,Pt particles were grown on the surface of the nanotubes using a combination of vacuum extraction and annealing.The resulting Pt/Y2O3∶Eu3+ composite nanotubes not only exhibited enhanced red luminescence under 255-or 468-nm excitation but could also be used to improve the efficiency of dyesensitized solar cells,resulting in an efficiency of 8.33％,which represents a significant enhancement of 11.96％ compared with a solar cell without the composite nanotubes.Electrochemical impedance spectroscopy results indicated that the interfacial resistance of the TiO2-dye|I3-/I-electrolyte interface of the TiO2-Pt/Y2O3:Eu3+ composite cell was much smaller than that of a pure TiO2 cell.In addition,the TiO2-Pt/Y2O3:Eu3+ composite cell exhibited a shorter electron transport time and longer electron recombination time than the pure TiO2 cell.     

Fe3O4/羧基改性壳聚糖复合纳米粒子的制备、表征及生物学应用

采用氧化水热法,以H2O2为氧化剂制备了磁性Fe3O4纳米颗粒.以磁性Fe3O4为核,通过反相悬浮聚合法对Fe3O4颗粒表面进行改性,在碳二亚胺的活化作用下,与壳聚糖衍生物-α-酮戊二酸缩壳聚糖(KCTS)反应制备了表面含有一定羧基的磁性Fe3O4/KCTS纳米粒子.经XRD、TEM、VSM、IR、TGA等手段对复合材料进行了表征及性能研究.结果表明,该磁性Fe3O4/KCTS纳米粒子的平均粒径为26nm,比饱和磁化强度为24.8A·m2/kg.其性能优良,具备超顺磁性,能很好的应用于生物分离,蛋白吸附等领域.     

Fe3O4磁性纳米颗粒的合成及其调控

利用水解共沉淀法制备了Fe3O4纳米颗粒,研究了温度和pH值对Fe3O4纳米颗粒粒径、形貌的影响关系。研究结果表明,反应温度从30℃升高到90℃,Fe3O4颗粒的粒径从6～8nm增大到10～12nm;同时,Fe3O4颗粒的饱和磁矩也随着Fe3O4颗粒粒径的增加而升高。溶液pH值会影响Fe3O4纳米颗粒的形状,高pH值易使合成的Fe3O4纳米颗粒为四方形,随着pH值的降低,Fe3O4纳米颗粒向球形转变。Fe3O4纳米颗粒的粒径和形状的可控性为进一步合成、调控Fe3O4电磁功能复合材料奠定了良好基础。     

Fe3O4磁性纳米颗粒的合成与接枝聚合修饰（英文）

以氨水作为沉淀剂并控制溶液的pH值,采用Fe3+和Fe2+共沉淀法制得了磁性四氧化三铁纳米颗粒。合成的磁性纳米颗粒通过高分辨透射电镜、X射线衍射仪、傅里叶变换红外光谱仪进行了表征。四氧化三铁纳米颗粒的粒径约为10nm,其表面含有丰富的羟基。为了增强磁性四氧化三铁纳米颗粒和聚合物基质之间的相互作用,在纳米颗粒的表面接枝上乙烯基单体。傅里叶变换红外光谱仪和热重分析仪的测试结果显示,聚合物链共价结合在纳米颗粒表面。表面接枝聚合后,四氧化三铁纳米颗粒由极性转变为非极性。     

Biocompatible nanoclusters of <Emphasis Type="Italic">O</Emphasis>-carboxymethyl chitosan-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: synthesis,characterization and magnetic heating efficiency

In this work, we developed a polymer encapsulation of Fe₃O₄ nanoparticles as a core–shell nanocluster with different sizes to investigate the cluster structure effect on their magnetic properties and magnetic heating behavior. Well-dispersed nanoclusters of O-carboxymethyl chitosan-coated Fe₃O₄ nanoparticles were synthesized by microwave-assisted co-precipitation. The cluster sizes were tunable by varying the concentration of polymers used during synthesis. Nanoclusters present superparamagnetic behavior at room temperature with a reduction in saturation magnetization as a consequence of coating layer. The shift of blocking temperature to the higher value with increasing clusters size shows the stronger magnetic interaction in larger magnetic clusters. In a low alternating magnetic field with frequency of 178 Hz and amplitude of 103 Oe, nanoclusters offer a high heating efficiency. A maximum specific absorption rate of 204 W/g is observed in the sample with hydrodynamic size of 53 nm. In vitro cytotoxicity analysis performed on HeLa cells verified that nanoclusters show a good biocompatibility and can be an excellent candidate for applications in hyperthermia cancer treatment.     

Magnetic properties of (Co,Al) co-doped SnO<Subscript>2</Subscript> nanoparticles

The desired size of pure SnO₂ and Co (1, 3, 5 mol%) with constant 5 mol% of Al co-doped into SnO₂ nanoparticles are synthesized by chemical co-precipitation method. The raw materials used in synthesis are SnCl₂.2H₂O, AlCl₃, Co (C₂H₃O₂).4H₂O, aqueous NH₄OH and Polyethyleneglycol (PEG) from AR grade. The XRD pattern of pure and co-doped samples confirm the formation of tetragonal rutile phase of SnO₂ nanoparticles with average particle size 25 and 20 nm respectively. Micrographs of scanning electron microscope (SEM) for pure and (Co, Al) co-doped into SnO₂ show that the prepared nanoparticles are agglomerate and spherical in shape. The EDAX spectra of prepared nanoparticles indicate the presence of Co²⁺, Al³⁺, Sn⁴⁺ and O²⁺ and also confirm stoichiometric proportions of raw material in the formation of SnO₂. Transmission electron microscope (TEM) reveals that the surface morphology of pure and co-doped samples are spherical, and average size of particles is ~20 nm. Magnetization measurements from M-H curves of VSM show that the ferromagnetism at low concentration of Co and at higher concentration of Co shows weak ferromagnetism due to super exchange coupling among neighboring ions. The bound magnetic polarons model supports the observed ferromagnetic behavior.     

Fabrication and magnetic properties of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocrystalline nanotubes

Aligned NiFe₂O₄ polycrystalline nanotubes have been successfully fabricated inside the nanochannels of porous anodic aluminum oxide (AAO) templates by wetting chemical deposition. A mixture of Fe nitrate and Ni nitrate, which was thermally decomposed at no less than 400 °C, was used to yield NiFe₂O₄ tubes. By varying the deposition conditions and the parameters of the templates, we could tailor the lengths and the outer as well as the inner diameters of the tubes. Transmission electron microscopy (TEM) images reveal that the nanotubes are uniform and well isolated. X-ray diffraction (XRD) and selected area electron diffraction (SAED) demonstrate that the as-obtained nanotubes can be indexed to polycrystalline cubic spinel. The Mössbauer spectra show that the magnetic hyperfine field is reduced with the decrease of the metrical temperature as well as the decrease of the size of nanoparticles.     

Hydrothermal synthesis and magnetic properties of NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles and nanorods

NiFe₂O₄ nanoparticles and nanorods were synthesized by a facile hydrothermal treatment of Ni(DS)₂ (Nickel dodecyl sulfate), FeCl₃, and NaOH aqueous solution at 120 °C. The products were characterized by powder X-ray diffraction, transmission electron microscopy, and selected area electron diffraction. The magnetic properties were evaluated using a vibrating sample magnetometer. The probable mechanism of the formation of NiFe₂O₄ nanoparticles and nanorods was discussed.     

Electrical and magnetic properties of poly(<Emphasis Type="Italic">m</Emphasis>-phenylenediamine)/NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposites

Poly(m-phenylenediamine) (PmPD)/NiFe₂O₄ nanocomposites were synthesized by in situ oxidative polymerization containing two different ratios of NiFe₂O₄ nanoparticles (10 and 20%). Dielectric studies of PmPD/NiFe₂O₄ nanocomposites were carried out at different temperature and frequency. Dielectric constants of PmPD/NiFe₂O₄ nanocomposites vary with the concentration of NiFe₂O₄ nanoparticles. Magnetic measurements of NiFe₂O₄ nanoparticles and PmPD/NiFe₂O₄ nanocomposites showed that they have ferromagnetic behaviour at room temperature. The XRD patterns of PmPD/NiFe₂O₄ nanocomposites are confirming the incorporation of NiFe₂O₄ nanoparticles into PmPD polymer. Room temperature Mössbauer spectrum of NiFe₂O₄ nanoparticles demonstrated that the Fe is in 3+ oxidation state with cubic structure. The SEM image of PmPD shows sphere like morphology. TGA suggest that thermal stability of PmPD/NiFe₂O₄ nanocomposites is greater than PmPD.     

Positively charged graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polyethylenimine with enhanced drug loading and cellular uptake for magnetic resonance imaging and magnet-responsive cancer therapy

Enhanced cellular uptake efficiency of nanoparticles is important for their biomedical applications,including photothermal therapy (PTT) for cancer.In this study,a one-pot method was used to construct a positively charged and magnet-responsive nanocomposite comprising reduced graphene oxide anchoring iron oxide (RGI) with a polyethylenimine (PEI) modification,to improve the efficiency of cell internalization.The surface charge can be finely tuned using PEIs of different molecular weights.The obtained RGI1.8k composite (RGI modified by 1.8 kDa PEI) could load indocyanine green (ICG) at a high mass ratio of 10:3 and ablate cancer cells using low-density laser irradiation because of its positively charged surface.In addition,the hybrids of RGIr8k and ICG could kill most cancer cells at a laser density of 0.7 W/cm2 in vitro and 0.3 W/cm2 in vivo.At the same time,cell viability could be controlled by converting the external magnetic-field direction because of the enrichment of the magnet-responsive composite in vitro and in vivo.Furthermore,RGI1.8k-ICGs could be used as T2-weighted magnetic resonance and infrared thermal imaging agents.Coupled with the magnetic target effect,the imaging signal could be improved significantly.Therefore,RGI1.8k-ICGs represent a new highly efficient PTT and imaging agent with great potential for cancer treatment.     

Dual-mode protein detection based on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-Au hybrid nanoparticles

A facile method of synthesizing Fe₃O₄-Au hybrid nanoparticles is reported utilizing the multifunctional nature of polyethyleneimine (PEI). An abundance of 5 nm gold nanoparticles were attached to 50 nm Fe₃O₄ nanoparticles via the covalent binding between the -NH₂ groups of the PEI and Au nanoparticles, as well as the electrostatic interaction between the negatively charged citrate-coated Au nanoparticles and the positively charged PEI-coated Fe₃O₄ nanoparticles. The as-prepared Fe₃O₄-Au hybrid nanoparticles, which combine the merits of magnetic materials and gold, were successfully employed for the first time in the dual-mode detection of carcinoembryonic antigen (CEA) via electrochemical and surface-enhanced Raman scattering (SERS) methods. Both methods make clever use of Fe₃O₄-Au nanoparticles and can accurately verify the presence of antigens. In particular, the electrochemical immunosensor detection displays a wide linear range (0.01–10 ng/mL) of response with a low detection limit (10 pg/mL), while the SERS method responds to even lower antigen concentrations with a wider detection range. The Fe₃O₄-Au hybrid nanoparticles therefore exhibit great potential for biomedical applications.      

Solvothermal synthesis of CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> hollow spheres

Hollow CoFe₂O₄ spheres consisted of CoFe₂O₄ nanoparticles were synthesized by a facile solvothermal treatment of an ethylene glycol solution of FeCl₃ · 6H₂O, CoCl₂ · 6H₂O, and NaAc at 200 °C in the presence of polyethylene glycol and oleic acid. The products were characterized by powder X-ray diffraction, transmission electron microscopy, selected area electron diffraction, high-resolution transmission microscopy, scanning electron microscopy. The magnetic properties were evaluated using a vibrating sample magnetometer. The probable mechanism of the formation of Hollow CoFe₂O₄ spheres was discussed. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mesoporous multifunctional upconversion luminescent and magnetic "nanorattle" materials for targeted chemotherapy

Nanorattles consisting of hydrophilic, rare-earth-doped NaYF(4) shells each containing a loose magnetic nanoparticle were fabricated through an ion-exchange process. The inner magnetic Fe(3)O(4) nanoparticles are coated with a SiO(2) layer to avoid iron leaching in acidic biological environments. This multifunctional mesoporous nanostructure with both upconversion luminescent and magnetic properties has excellent water dispersibility and a high drug-loading capacity. The material emits visible luminescence upon NIR excitation and can be directed by an external magnetic field to a specific target, making it an attractive system for a variety of biological applications. Measurements on cells incubated with the nanorattles show them to have low cytotoxicity and excellent cell imaging properties. In vivo experiments yield highly encouraging tumor shrinkage with the antitumor drug doxorubicin (DOX) and significantly enhanced tumor targeting in the presence of an applied magnetic field.     

Synthesis of magnetic FeWO<Subscript>4</Subscript> nanoparticles and their decoration of WS<Subscript>2</Subscript> nanotubes surface

Owing to their unique properties such as mechanical, optical, magnetic, nanomaterials attracted a great interest over the last two decades. Inorganic nanotubes, e.g. WS₂, make an important class of nanomaterials with numerous potential applications. In the current work, a new synthetic strategy is developed to decorate the surface of WS₂ nanotubes with FeWO₄ nanoparticles. The FeWO₄ nanoparticles were produced by first depositing amorphous iron oxide film onto the WS₂ nanotubes’ surface and, subsequently, high-temperature annealing (600 °C). Careful analysis by electron microscopy; X-ray diffraction and other techniques were carried out. Based on these analyses, the growth mechanism of the hybrid nanostructures was elucidated. Magnetic measurements were employed to shed light on the magnetic behavior of the hybrid nanostructures. The orientation and position of the WS₂ nanotubes decorated with the FeWO₄ nanoparticles could be partially affected by applying a magnetic field using non-viscous solvents, like ethanol.