Study on a Combination Drying Technique of Sea Cucumber

To develop a highly efficient drying technique for sea cucumber, the effects of different drying methods on the drying procedure and product quality were investigated. FD could lead to the best quality but took the longest time, and AD product quality was too poor. VMD was introduced to combine with FD to get acceptable quality and reduce drying time. In order to get optimal technique parameters, an RSA experiment was carried out. The optimal technique parameters of combination drying of FD-VMD were 45% conversion point, 20–30 kPa chamber pressure, and 350–450 W microwave power. Compared with Freeze Drying (FD), Air Drying (AD)-Vacuum Microwave Drying (VMD) could reduce the drying time to half and maintain good product quality.     

Microwave Freeze Drying of Sea Cucumber Coated with Nanoscale Silver

To develop an improved dehydration method for sea cucumber, microwave freeze drying was tested as a potential method. According to our experimental results, microwave freeze drying can reduce drying time to about half of the traditional vacuum freeze-drying process. To ensure a high degree of sterilization, a novel nanoscale silver coating technique was combined with microwave freeze drying. Microwave freeze drying combined with nanoscale silver coating treatment leads to a much lower microorganism number with no significant effect on drying efficiency and sensory quality.     

Microwave Freeze Drying of Sea Cucumber Coated with Nanoscale Silver

To develop an improved dehydration method for sea cucumber, microwave freeze drying was tested as a potential method. According to our experimental results, microwave freeze drying can reduce drying time to about half of the traditional vacuum freeze-drying process. To ensure a high degree of sterilization, a novel nanoscale silver coating technique was combined with microwave freeze drying. Microwave freeze drying combined with nanoscale silver coating treatment leads to a much lower microorganism number with no significant effect on drying efficiency and sensory quality.     

Ultrasonically Enhanced Osmotic Pretreatment of Sea Cucumber Prior to Microwave Freeze Drying

A new pretreatment method involving use of ultrasound prior to microwave freeze drying of sea cucumber was examined experimentally. It was observed that ultrasound-assisted osmotic pretreatment can reduce by about 2 h the time needed for microwave freeze drying. An optimization study using response surface analysis was carried out to determine the optimal operating parameters to minimize drying time while maximizing quality.     

Combined Electrohydrodynamic (EHD) and Vacuum Freeze Drying of Sea Cucumber

A combination of electrohydrodynamic drying (EHD) and vacuum freeze drying (FD) is examined as an improved method for dehydrating sea cucumbers. The energy consumption, shrinkage and rehydration ratio, protein content, and sensory properties, such as the color and trimness, of the dried product in the EHD–FD method are measured. Compared with FD, the combined process consumes less drying time and has lower energy consumption than EHD drying alone. Also, the product processed by combined drying displays lower shrinkage, higher rehydration rate and higher protein content, along with better sensory qualities.     

Effects of Different Drying Methods on the Quality Changes of Granular Edamame

In this article, the quality changes of the granular fruits and vegetables dried by vacuum microwave drying, freeze drying, hot air drying, and combined hot air-vacuum microwave drying are investigated, and the quality parameters compared on the basis of vitamin C and chlorophyll contents, shrinkage and rehydration capacity, color, texture, and microstructure changes. The quality parameters of products dried by vacuum microwave drying are slightly lower than those obtained by freeze drying, but much better than those obtained using conventional hot air drying. The quality characteristics of product dried by combined hot air-vacuum microwave are significantly improved compared to those simply hot air-dried.     

Effects of Different Drying Methods on the Quality Changes of Granular Edamame

In this article, the quality changes of the granular fruits and vegetables dried by vacuum microwave drying, freeze drying, hot air drying, and combined hot air–vacuum microwave drying are investigated, and the quality parameters compared on the basis of vitamin C and chlorophyll contents, shrinkage and rehydration capacity, color, texture, and microstructure changes. The quality parameters of products dried by vacuum microwave drying are slightly lower than those obtained by freeze drying, but much better than those obtained using conventional hot air drying. The quality characteristics of product dried by combined hot air–vacuum microwave are significantly improved compared to those simply hot air–dried.     

Freeze Drying of Apple Slices with and without Application of Microwaves

In this study, Fuji apple slices were dehydrated using freeze drying (FD) combined with microwave assisted with vacuum drying (VMD). The optimal parameter for the diversion point of moisture content from FD to VMD process was at the moisture level of 21%, and for VMD the optimal parameter for vacuum pressure was at 9.15 kPa and microwave power density was at a level of 3.18 w/g. The results show that the two-step technique can significantly reduce total FD time required by up to 40%, while the nutritional value of the dried apple chips remained unchanged compared to FD used alone.     

洋葱真空干燥动力学研究

为研究洋葱在真空干燥条件下的干燥特性,选用不同干燥条件对洋葱进行脱水处理,测定不同工艺条件下洋葱的干燥曲线和干燥速率曲线。结果表明,温度和真空度对洋葱真空干燥过程都有明显的影响,且洋葱真空干燥的动力学模型符合Page方程,并得到本试验条件下的动力学模型。     

Production of Crispy Granules of Fish: A Comparative Study of Alternate Drying Techniques

Three alternate dying methods—vacuum drying (VD), vacuum microwave drying (VMD), and pulse-spouted vacuum–microwave drying (PSVMD)—were examined experimentally for their potential as an industrial scale technology to produce granules of fish. Drying kinetics as well as key quality parameters such as expansion ratio, texture, color, sensory characteristics, and microstructure of crispy granules produced by these drying techniques were examined. Results showed that the drying time is reduced with an increase in microwave power level and with reduced pressure as expected. The quality of the granules is affected by the drying method and the operating parameters employed. Granules obtained using PSVMD at a microwave power density of 6.0 W/g displayed optimal quality required for the commercial product accepted by consumers.     

Experimental Study on Microwave Vacuum Drying of Two-Porosity Level Media

Microwave vacuum drying experiments were performed on a laboratory scale dryer with a two-level porosity material: a packed bed of porous alumina beads. The incident microwave power and the vacuum pressure level were fixed, the main varying parameters being the beads diameter and porosity, and the mean pore diameter. The drying kinetics and the evolution of the product temperature are presented. The drying kinetics can be divided into two main periods. The first one corresponds to the drying from the bed voids according to evaporation mechanism that we describe with a stagnant film law. The second one corresponds to the drying from the particle pores and we divide it into two parts: we suggest that the former is dominated by capillarity driven moisture transport, and the latter is limited by the desorption kinetics of the few water layers left.     

Experimental Study on Microwave Vacuum Drying of Two-Porosity Level Media

Abstract

Microwave vacuum drying experiments were performed on a laboratory scale dryer with a two-level porosity material: a packed bed of porous alumina beads. The incident microwave power and the vacuum pressure level were fixed, the main varying parameters being the beads diameter and porosity, and the mean pore diameter. The drying kinetics and the evolution of the product temperature are presented. The drying kinetics can be divided into two main periods. The first one corresponds to the drying from the bed voids according to evaporation mechanism that we describe with a stagnant film law. The second one corresponds to the drying from the particle pores and we divide it into two parts: we suggest that the former is dominated by capillarity driven moisture transport, and the latter is limited by the desorption kinetics of the few water layers left.     

Effect of Ultrasound Pretreatment on Vacuum Drying of Chinese Catalpa Wood

Ultrasound pretreatment of wood prior to drying was examined as a method to increase the effective water diffusivity, reduce drying time, and improve product quality of Chinese Catalpa wood. Pretreatment tests were carried out at three pretreatment durations, three absolute pressure levels, and three ultrasonic intensities. All specimens were then dried at 60°C and the absolute pressure level of 0.02 MPa to determine the effects of pretreatment parameters on vacuum drying characteristics. A microscopic analysis was carried out to visualize the formation of microchannels and view any other changes to wood tissue structure that occurred. Results showed that ultrasound pretreatment prior to vacuum drying enhances the effective water diffusivity; the higher the ultrasound power level, the longer the pretreatment time, and the lower the absolute pressure, the shorter is the drying time. Ultrasound creates micro channels within the tissue of wood during pretreatment. However, the pretreatment time should not be too long when the ultrasound is high.     

粮食真空低温干燥新技术的优势

真空低温干燥技术是近年来被广泛应用的一项新技术。就近年来真空低温干燥技术在东北玉米干燥方面的应用研究及其进展作了综述。探讨了真空干燥技术在玉米方面的应用前景。     

A Vacuum Drying Model for Mango Pulp

Vacuum drying of mango pulp at varying conditions of pulp thickness (2, 3, and 4 mm) and vacuum chamber plate temperature (65, 70, and 75°C) was carried out under 30-50 mm of mercury absolute pressure. A model based on moisture diffusivity was found to give close prediction to moisture content of the pulp at different times of drying with correlation coefficient varying between 0.98-0.99 for pure mango pulp and pulp with ingredients. Color change of reconstituted pulp made from mango powder was found to depend more on pulp thickness than plate temperature. For getting low color change vacuum drying should be carried at maximum pulp thickness of 2.6 mm and vacuum chamber plate temperature of 72.3°C.     

A Vacuum Drying Model for Mango Pulp

Abstract

Vacuum drying of mango pulp at varying conditions of pulp thickness (2, 3, and 4 mm) and vacuum chamber plate temperature (65, 70, and 75°C) was carried out under 30–50 mm of mercury absolute pressure. A model based on moisture diffusivity was found to give close prediction to moisture content of the pulp at different times of drying with correlation coefficient varying between 0.98–0.99 for pure mango pulp and pulp with ingredients. Color change of reconstituted pulp made from mango powder was found to depend more on pulp thickness than plate temperature. For getting low color change vacuum drying should be carried at maximum pulp thickness of 2.6 mm and vacuum chamber plate temperature of 72.3°C.     

Trends in Microwave-Assisted Freeze Drying of Foods

Microwave-assisted freeze drying (MFD) can be accomplished in two distinct ways: freeze drying assisted concurrently with microwave application (MFD-1) and freeze drying and assisted microwave/vacuum microwave drying in two consecutive separate drying stages (MFD-2). MFD is a rapid dehydration technique that can be applied to certain foods, particularly to seafoods, solid soup, and fruits and vegetables. MFD involves much less drying time and energy consumption than conventional freeze-drying methods. Currently, this technology has been successfully used to dry many food materials and has potential in the food industry. Increasing concerns over product quality, energy savings, and production costs have motivated researchers and the industry to adopt MFD technologies. The advantages of MFD include shorter drying time, energy savings, improved product quality, and flexibility in producing a wide variety of dried products. However, current applications are limited to small categories of foods due to high startup costs and relatively complex technology compared to conventional freeze drying. This article presents a concise review of recent progress in MFD R&D and makes recommendations for future research to bridge the gap between laboratory research and industrial applications.     

Freeze Drying of Saffron (Crocus sativus L.)

Saffron obtained from the dried stigmas of a flower scientifically known as Crocus sativus L. is considered to be the most precious and expensive agricultural product due to its labor-intensive harvest and post-harvest processing. The post-harvest processing such as dehydration and storage conditions determine stability, quality, and economical value of the final product. The contents of crocin (degraded carotenoids) and safranal (carotenoid oxidation products) are the key components that characterize color, taste, and aroma characteristics of saffron. In this work, the quality parameters such as crocin and safranal contents of commercial saffron that were obtained by using the freeze-drying method and natural sun drying were studied. The sarfanal contents of the samples dried in a freeze dryer were found to be five times higher than the safranal contents of the samples dried naturally under the sun, while crocin contents of the samples dried in a freeze dryer were about 40% higher than the crocin contents of the samples dried naturally under the sun. These encouraging results indicate that the freeze-drying process can be used effectively for dehydration of saffron by minimal loss of safranal and crocin contents.     

Modeling Power Transformer Field Drying Processes

Power transformer field drying is becoming a habitual practice because water is damaging for transformer insulation, and its presence increases the probability of unexpected failures. Different drying methods are currently being used by electrical companies but sometimes without a profound knowledge of the drying processes involved, and consequently drying is not as effective as would be desirable.

Physical models have been developed by the authors in order to study power transformer drying processes. The use of the models will help to plan more effective drying processes, tailoring the drying times and drying conditions for each particular case. The models have been tested in a test transformer fitted with sensors. In order to monitor the process, insulation samples were extracted from the transformer before and after the process.

In this article, several transformer drying procedures are described. Theoretical models and their experimental validation processes are reported. Finally, some general recommendations about transformer drying in the field are provided.     

真空连续干燥系统抽气量的计算

介绍了真空连续干燥装置真空系统—抽气量的计算方法,通过与实际实验装置操作情况的比较,验证了该计算方法的可行性。