Preparation of new poly(amide–imide)s with chiral architectures via direct polyamidation reaction

N‐trimellitylimido‐L ‐methionine ( 3 ) was prepared by reaction of trimellitic anhydride ( 1 ) with ‐L ‐methionine ( 2 ) in acetic acid solution at refluxing temperature. This diacid was reacted with thionyl chloride, and N‐trimellitylimido‐L ‐methionine diacid chloride ( 4 ) was obtained in quantitative yield. The resulting diacid chloride was reacted with p‐aminobenzoic acid in dry acetone and bis(p‐aminobenzoic acid)‐N‐trimellitylimido‐L ‐methionine ( 5 ) was obtained as a novel optically active amide–imide diacid monomer in high yield. The direct polycondensation of amide–imide diacid monomer 5 with several aromatic diamines was carried out with tosyl chloride (TsCl)/pyridine (Py)/dimetheylformamide (DMF) system. The resulting thermally stable poly(amide–imide)s (PAIs) were obtained in good yields and inherent viscosities ranging between 0.24 and 0.46 dL g^?1 and were characterized with FTIR, ¹H NMR, CHN, and TGA techniques. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1248–1254, 2007     

Highly diastereoselective synthesis of novel polymers via tandem Diels–Alder–ene reactions

Cis -9,10-dihydro-9,10-ethanoanthracene-11-12-dicarboxylic acid anhydride (1) was converted into its amic acid derivative by reaction with L -leucine. The cyclization reaction was carried out in situ using triethylamine to give the succinic imide-acid derivative (2). Compound (2) was converted to the acid chloride (3) by reaction with thionyl chloride. The reaction of acid chloride (3) with isoeugenol (4) was carried out in chloroform and a novel optically active isoeugenol ester derivative (5) was obtained in high yield. 4-Phenyl-1,2,4-triazoline-3,5-dione (PhTD) (6) was allowed to react with compound (5). The reaction is very fast and gives only one diastereoisomer of (7) via Diels–Alder and ene pathways in quantitative yield. Compound (7) was characterized by ¹H NMR, IR, specific rotation and elemental analysis, and was used as a model for the polymerization reactions. The polymerization reactions of compound (5) with bis-triazolinediones (8), (9) were performed in N,N-dimethylacetamide (DMAc) at room temperature. The reactions are exothermic and fast, and give novel optically active polymers. Some physical properties and structural characterizations of these new polymers have been studied, and are reported. © 1999 Society of Chemical Industry     

Synthesis and characterization of novel optically active and flame‐retardant heterocyclic polyimides

Tetrachlorophthalic anhydride (1) was reacted with L ‐leucine (2) in toluene solution at refluxing temperature in the presence of triethylamine and the resulting imide‐acid (4) was obtained in quantitative yield. The compound (4) was converted to the N‐(tetrachlorophthaloyl)‐L ‐leucine acid chloride (5) by reaction with thionyl chloride. The reaction of this acid chloride (5) with isoeugenol (6) was carried out in chloroform and novel optically active isoeugenol ester derivative (7) as a chiral monomer was obtained in high yield. The compound (7) was characterized by ¹H‐NMR, IR, Mass and elemental analysis, and then was used for the preparation of model compound (10) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione, PhTD (8) was allowed to react with compound (7). The reaction is very fast, and gives only one diastereomer of (10) via Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer (7) with bistriazolinediones [bis‐(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (11) and 1,6‐bis‐(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] (12) were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic, fast, and give novel optically active polymers (13) and (14) via repetitive Diels–Alder‐ene polyaddition reactions. The resulting polymers are optically active, thermally stable, and flame resistant. All of the above compounds were fully characterized by IR, ¹H‐NMR, elemental analysis, and specific rotation. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 240–248, 2000     

Synthesis of novel photoactive heterocyclic polyimides containing naphthalene moieties via cycloaddition reactions

1‐Naphthylacetic acid (1) was reacted with thionyl chloride and 1‐naphthyl‐ acetyl chloride (2) was obtained in a quantitative yield. The reaction of this acid chloride (2) with isoeugenol (3) was performed in chloroform and a novel isoeugenol ester derivative (4) as a monomer was obtained in a high yield. The compound (4) was characterized by ¹H‐NMR, IR, mass, and elemental analyses and then was used for the preparation of a model compound (6) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione (PhTD) (5) was allowed to react with compound (4). The reaction is very fast and gives only one double adduct (6) via Diels–Alder and ene pathways in an excellent yield. The polymerization reactions of the novel monomer (4) with bistriazolinediones [bis‐(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (7) and 1,6‐bis‐(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] (8) were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic and fast and gave novel heterocyclic polyimides containing a naphthalenic pendant group (9) and (10) via repetitive Diels–Alder‐ene polyaddition reactions. Stereochemical analysis of the model compound and fluorimetric studies of the model compound as well as polymers were done conclusively. Excimer formation of the polymers and its effect on fluorescence emission were investigated and some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 527–536, 2000     

Crosslinked poly[acryloylN,N,-bis(2,2-dimethoxyethyl) amine] and crosslinked poly[acryloylmorpholine/acryloyl N,N,-bis(2,2-dimethoxyethyl) amine] gel networks and their application to the immobilization of β-d-glucosidase

The synthesis and homopolymerization of acryloyl N,N,-bis(2,2-dimethoxyethyl)amine is described. Gel networks were obtained by copolymerization of acryloyl N,N,-bis(2,2-dimethoxyethyl)amine and N,N,′-methylenediacrylamide (molar ratio 8:1) and by copolymerization of acryloyl morpholine, acryloyl N,N,-bis(2,2-dimethoxyethyl)amine and N,N,′-methylenediacrylamide (molar ratio 8:2:1). Following treatment of the gel networks with tartaric dihydrazide in dilute hydrochloric acid and subsequent activation with nitrous acid, conjugates of β-d-glucosidase were prepared. In both cases the immobilized enzyme was more resistant to heat denaturation than the native enzyme in solution. The nature of the polymer-enzyme linkage is discussed with reference to studies on the model compound phenylacetyl N,N-bis(2,2-dimethoxyethyl)amine.     

Synthesis and characterization of novel poly(amide imide)s based on bis(p‐amidobenzoic acid)‐n‐trimellitylimido‐L‐leucine

N‐Trimellitylimido‐L ‐leucine was reacted with thionyl chloride, and N‐trimellitylimido‐L ‐leucine diacid chloride was obtained in a quantitative yield. The reaction of this diacid chloride with p‐aminobenzoic acid was performed in dry tetrahydrofuran, and bis(p‐amidobenzoic acid)‐N‐trimellitylimido‐L ‐leucine (5) was obtained as a novel optically active aromatic imide–amide diacid monomer in a high yield. The direct polycondensation reaction of the monomer imide–amide diacid 5 with 4,4′‐diaminodiphenylsulfone, 4,4′‐diaminodiphenylether, 1,4‐phenylenediamine, 1,3‐phenylenediamine, 2,4‐diaminotoluene, and benzidine (4,4′‐diaminobiphenyl) was carried out in a medium consisting of triphenyl phosphite, N‐methyl‐2‐pyrolidone, pyridine, and calcium chloride. The resulting novel poly(amide imide)s (PAIs), with inherent viscosities of 0.22–0.52 dL g^?1, were obtained in high yields, were optically active, and had moderate thermal stability. All of the compounds were fully characterized with IR spectroscopy, elemental analyses, and specific rotation. Some structural characterization and physical properties of these new optically active PAIs are reported. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 35–43, 2002; DOI 10.1002/app.10181     

Simple,Mild, and Practical Esterification,Thioesterification, and Amide Formation Utilizing p‐Toluenesulfonyl Chloride and N‐Methylimidazole

We have developed an efficient method for the esterification or thioesterification of equimolar amounts of carboxylic acids and alcohols or thiols using a novel reagent, p‐toluenesulfonyl chloride (TsCl) together with N‐methylimidazole. The present method is simple, mild, and reactive, uses readily available and economical reagents. The choice of amine is critical for the present method. The amine, N‐methylimidazole, has two roles: (i) as an HCl scavenger for the initial smooth generation of mixed anhydrides between carboxylic acids and TsCl and (ii) successive formation of highly reactive ammonium intermediates from mixed anhydrides. This method could be applied to various types of carboxylic acids, alcohols, and thiols: a) several functionalities were tolerated; b) two N‐Cbz amino acids were smoothly esterified without racemization; and c) the labile 1β‐methylcarbapenem key intermediate and a pyrethroid insecticide, prallethrin, were successfully prepared. The related amide formation between carboxylic acids and primary or secondary amines was also performed. The proposed reaction mechanism involves a novel method for producing the reactive acylammonium intermediates. The production of these intermediates was rationally supported by a careful ¹H NMR monitoring study.     

Preparation and characterization of new photoactive polyamides containing 4‐(4‐dimethylaminophenyl)urazole units

4‐(4‐dimethylaminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( DAPTD ) was prepared from 4‐dimethylaminobenzoic acid in five steps. The compound DAPTD was reacted with excess acetyl chloride in N,N‐dimethylacetamide (DMAc) solution and gave 1,2‐bisacetyl‐4‐[4‐(dimethylaminophenyl)]‐1,2,4‐triazolidine‐3,5‐dione as a model compound. Solution polycondensation reactions of monomer with succinyl chloride (SucC), suberoyl chloride (SubC), and sebacoyl chloride (SebC) were performed under conventional solution polymerization techniques in the presence of triethylamine and pyridine as a catalyst in N‐methylpyrrolidone (NMP) and led to the formation of novel aliphatic polyamides. These novel polyamides have inherent viscosities in the range of 0.09–0.21 dL/g in N,N‐dimethylformamide (DMF) at 25°C. Fluorimetric studies of the model compound as well as polymers were performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 947–954, 2007     

Synthesis and characterization of new polyamides containing p‐phenylenediacryloyl moieties in the main chain

Six new polyamides 8a–f containing p‐phenylenediacryloyl moieties in the main chain were prepared by the direct polycondensation reaction of bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 with 1,4‐diphenylene diamine 7a , 1,3‐diamino toluene 7b , 1,5‐diamino naphthalene 7c , 4,4′‐diamino diphenyl ether 7d , 4,4′‐diamino diphenyl sulfone 7e , and 3,3′‐diamino diphenylsulfone 7f by using thionyl chloride, N‐methyl‐2‐pyrolidone, and pyridine as condensing agents. These new polymers 8a–f were obtained in high yield and inherent viscosity between 0.35–0.65 dL/g. The resulting polyamides were characterized by elemental analysis, viscosity measurements, thermal gravimetric analysis (TGA and DTG), solubility test, FTIR and UV–vis spectroscopy. Diacid acid 6 as a new monomer containing p‐phenylenediacryloyl moiety was synthesized by using a three‐step reaction. First, p‐phenylenediacrylic acid 3 was prepared by reaction of terephthal aldehyde 1 with malonic acid 2 in the presence of pyridine, then diacid 3 was converted to p‐phenylenediacryloyl chloride 4 by reaction with thionyl chloride. Finally, bis(p‐amidobenzoic acid)‐p‐phenylene diacrylic acid 6 was prepared by the condensation reaction of phenylenediacryloyl chloride 4 with p‐aminobenzoic acid 5 . © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of novel optically active poly(amide–imide)s containing N,N′‐(pyromellitoyl)‐bis‐L‐valine diacid chloride and 5,5‐disubstituted hydantoin derivatives under microwave irradiation

Pyromellitic dianhydride (1,2,4,5‐benzenetetracarboxylic acid 1,2,4,5‐dianhydide) was reacted with L ‐valine in a mixture of acetic acid and pyridine (3:2) at room temperature, and then was refluxed at 90–100 °C, N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid was obtained in quantitative yield. The imide–acid was converted to N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride by reaction with thionyl chloride. Rapid and highly efficient synthesis of a number of poly(amide–imide)s was achieved under microwave irradiation using a domestic microwave oven by polycondensation of N,N′‐(pyromellitoyl)‐bis‐L ‐valine diacid chloride with six different derivatives of 5,5‐disubstituted hydantoin compounds in the presence of a small amount of a polar organic medium that acts as a primary microwave absorber. A suitable organic medium was o‐cresol. The polycondensation proceeded rapidly, compared with conventional melt polycondensation and solution polycondensation and was almost completed within 8 min, giving a series of poly(amide–imide)s with inherent viscosities in the range 0.15–0.36 dl g^?1. The resulting poly(amide–imide)s were obtained in high yield and are optically active and thermally stable. All of the above compounds were fully characterized by Fourier‐transform infrared (FT‐IR) spectroscopy, elemental analysis, inherent viscosity (η_inh) measurements, solubility testing and specific rotation measurements. The thermal properties of the poly(amide–imide)s were investigated by using thermogravimetric analysis. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of highly soluble and thermally stable new polyimides based on 3,5-diamino benzoyl amino phenyl-14H-dibenzo[a,j]xanthene

A new xanthene-containing diamine monomer was successfully synthesized in four steps by the condensation of β-naphthol and 4-nitrobenzaldehyde in the presence of p-toluenesulfonic acid catalyst, reduction of the nitro intermediate, the nucleophilic substitution reaction of amine compound and 3,5-dinitrobenzoyl chloride, and subsequent reduction of the dinitro compound. The diamine monomer could be obtained in quantitative yield. A series of novel organosoluble aromatic polyimides were prepared by direct polycondensation of synthesized diamine with four tetracarboxylic dianhydrides via a conventional two-step polymerization process. The polymers were obtained in quantitative yields with inherent viscosities of 0.20–0.74 dL/g. Most of the polymers dissolved in N-methyl-2-pyrrolidone, N,N-dimethylacetamide, N,N-dimethylformamide and dimethyl sulfoxide. The resulting polyimides exhibited good thermal stability; no weight loss was detected before a temperature of 450 °C in nitrogen. Wide-angle X-ray diffraction measurements showed that these polyimides were predominantly amorphous.     

New optically active poly(amide-imide)s based on N,N′-(pyromellitoyl)-bis-L-amino acid and 1,3-bis(4-aminophenoxy) propane: Synthesis and characterization

Five new poly(amide-imide)s 8a–e were synthesized through the direct polycondensation reaction of five chiral N,N′-(pyromellitoyl)-bis-L -amino acids 3a–e with 1,3-bis(4-aminophenoxy) propane 7 in a medium consisting of N-methyl-2-pyrrolidone, triphenyl phosfite, calcium chloride, and pyridine. The polycondensation reaction produced a series of novel poly(amide-imide)s containing trimethylene moiety in the main chain in high yield with inherent viscosities between 0.34 and 0.65 dL/g. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, and solubility tests. Thermal properties of these polymers were investigated by using thermal gravimetric analysis (TGA) and differential thermal gravimetric (DTG). All of the polymers were soluble at room temperature in polar solvents such as N,N-dimethyl acetamide, N,N-dimethyl formamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone. N,N′-(pyromellitoyl)-bis-L -amino acids 3a–e were prepared in quantitative yields by the condensation reaction of pyromellitic dianhydride (1,2,4,5-benzenetetracarboxylic acid 1,2,4,5-dianhydide) 1 with L -alanine 2a , L -valine 2b , L -leucine 2c , L -isoleucine 2d , and L -phenyl alanine 2e in acetic acid. Also 1,3-bis(4-aminophenoxy) propane 7 was synthesized by using a two-step reaction. At first 1,3-bis(4-nitrophenoxy) propane 6 was prepared from the reaction of 4-nitrophenol 4 with 1,3-dibromoprapane 5 in NaOH solution. Then, dinitro compound 6 was reduced by using Na₂S. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Some biophysical properties of castor oil esterified with some acid anhydrides

A series of castor oil adducts were synthesized by esterification of castor oil with acid anhydrides: phthalic, maleic and succinic anhydrides. The chemical structure of castor oil and the prepared adducts were characterized by means of IR and ¹H NMR spectroscopy. The number‐average and weight‐average molecular weights were measured by gel permeation chromatography. The electrical properties were studied through the permittivity, dielectric loss and conductivity measurements, which are considered to be in the range of electrical insulation. The electrical conductivity, which describes the ionic mobility of the systems, was found to be in the range of 10^–9 to 10^–12 S/cm. This indicates that castor oil and its esters could be used for antistatic applications. The viscosity η and the activation energy E_η, obtained from the dependency of viscosity on temperature using the Arrhenius equation, were found to increase with increasing molecular weight of the system. The effect of different concentrations of castor oil and its esters on the growth activities of the sugar beet pathogens R. solani and S. rolfsii was studied through the determination of percent germination, average length of hyphal extensions, dry mass yield and the production of sclerotia. The obtained data indicate that the esterification of castor oil with anhydrides improves the antifungal activity.     

Novel Strategy for Anhydride-Functionalization of Poly(Vinyl Chloride): Synthesis and Characterization

A new strategy for anhydride-functionalization of poly(vinyl chloride) is suggested. First, some chlorine groups of poly(vinyl chloride) were converted to phenylamine-oxy groups by a nucleophilic substitution reaction in the presence of a solvent composed of 4-aminophenol, K₂CO₃, and dry N,N-dimethylformamide at room temperature, to avoid cross-linking. The phenylamine-functionalized poly(vinyl chloride) was further reacted with maleic and 1,2,4-benzenetricarboxylic acid anhydrides. The chemical structures of all samples as representatives were characterized by Fourier transform infrared and nuclear magnetic resonance spectroscopies. The chemical compositions of the synthesized anhydride-functionalized poly(vinyl chloride) were investigated by elemental analysis, and their thermal behaviors were characterized by means of differential scanning calorimetry and thermogravimetric analyzer.     

Preparation of higher aliphatic acid esters of wood in an N2O4–DMF cellulose solvent medium

Esterification of wood meal with a series of aliphatic acid anhydrides and acid chlorides in a nonaqueous cellulose solvent, an N₂O₄–DMF solvent, has been studied. The N₂O₄–DMF–pyridine solution used as the reaction medium plays a role in destroying the molecular order of the cellulose within the wood, enabling the cellulose to be uniformly substituted by acyl groups along its chain. These uniformly distributed blocking groups result in the permanent decrystallization of the wood. The acyl blocking groups are best achieved by esterification using acid chlorides in the nonaqueous solvent. Acid chlorides, from caproyl to stearoyl chloride, were found to be much more effective as acylating agents than acid anhydrides, from propionic to caproic anhydride. Although no difference in reactivity can be recognized among the acid chlorides, the reactivity decreases with increase in the number of carbon atoms in the acyl group among the acid anhydrides.     

Synthesis of two Unique Compounds,a Ceramide and a Cerebroside,Occurring in Human Stratum Corneum

The cerebroside 1a and the ceramide 1b , both playing important roles in epidermal barrier function, were synthesized by N‐acylation of 1‐O‐glucosylated C₁₈‐sphingosine 2 and C₁₈‐sphingosine 8 , respectively, with O‐acyl fatty acid 3 . The required compound 3 was obtained from ω‐hydroxy fatty acid 6 and linoleic acid 7 by esterification. The ω‐hydroxy C₃₀‐fatty acid 6 was prepared as follows: Copper‐catalyzed coupling of ω‐hydroxy alkyl halide 11 with the Grignard reagent derived from bromo compound 13 afforded after oxidation C₁₇‐aldehyde 15 . Wittig reaction with phosphonium salt 10 , derived from ω‐bromo‐tridecanoic acid 9 , and subsequent hydrogenation and O‐deprotection furnished 6 in high yield.     

Synthesis and thermal stability,dielectric and conductivity characteristics of some aromatic anhydride-modified carbazole polymers

Copolycondensates have been prepared from carbazole, poly(N-vinylcarbazole) and various aromatic anhydrides, e.g., phthalic anhydride, trimellitic acid anhydride, pyromellitic dianhydride, naphthalene tetracarboxylic dianhydride, and benzophenone tetracarboxylic dianhydride in presence of the Friedel–Crafts catalyst anhydrous zinc chloride at high temperature. The polymers have been characterized by elemental analyses and IR spectroscopy. Thermal stabilities, dielectric, and conductivity behaviors of these polymers have also been evaluated and it has been observed that these properties show interesting differences depending upon the nature of the anhydride.     

Effective separation of aromatic hydrocarbons by pyridine‐based deep eutectic solvents

Many promising qualities of deep‐eutectic solvents made them suitable solvents in separation process. In this work, the pyridine‐based deep eutectic solvents were designed and synthesized with N‐ethylpyridinium bromide and two HBDs (N‐formyl morpholine and levulinic acid). Two ternary systems, benzene + cyclohexane + DES and toluene + n‐heptane + DES, were studied by the liquid‐liquid extraction. The effect of different HBDs, extraction time, volume ratio of DES to system solution, and the initial concentration of aromatic were studied. The DES with N‐formyl morpholine showed better separation performance than that with levulinic acid. The liquid‐liquid extraction equilibrium could be obtained in 10 minutes. The volume ratio of DES to system solution was set as 1:1. Both DESs showed their best separation performance at low temperatures (20°C) and low aromatic concentration system. For the benzene + cyclohexane system, the distribution coefficient of benzene was 1.733 and the selectivity was 23.8 at 20°C. For the toluene + n‐heptane system, the distribution coefficient of toluene was 0.853 and the selectivity was 40.7. Tie‐lines for two ternary systems were obtained, and the Othmer‐Tobias correlation was used to check the reliability of the obtained liquid‐liquid extraction experimental data. The experimental LLE data were correlated using the NRTL model and the calculated data correlated significantly with the experimental data.     

Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione and Diisocyanates

Summary 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione (DAPTD) was prepared from 4-dimethylaminobenzoic acid in five steps. The reaction of monomer DAPTD with n-isopropylisocyanate was performed at room temperature in N,N-dimethylacetamide (DMAc) solution and the resulting bis-urea derivative was obtained in high yield and was finally used as a model compound for polymerization reaction. The step-growth polymerization reactions of monomer with hexamethylene diisocyanate (HMDI), isophorone diisocyanate (IPDI) and toluene-2,4-diisocyanate (TDI) were performed in DMAc solution in the presence of pyridine, triethylamine or dibutyltin dilurate as catalysts. Some physical properties and structural characterization of these novel polyureas are reported. Fluorimetric studies of the model compound as well as polymers were performed.     

A facile and efficient method for preparation of chiral supported poly(styrene–divinylbenzene) copolymers

A new and efficient method for preparation of optically active poly(styrene–divinylbenzene) copolymers (PS-DVB) is presented here. This is carried out by Friedel–Crafts acylation reaction of chiral N-phthaloyl -leucine acid chloride with PS-DVB beads in the presence of aluminum chloride as Lewis acid catalyst and 1,2-dichloroethane as the solvent at ambient temperature. Reagents’ amounts and reaction conditions are mentioned and four samples with different amounts of functionality have been prepared. Final products were characterized by FT-IR and elemental analysis. The results obtained confirm that the above modification in preparation of chiral supported PS-DVB has been achieved well and in moderate yield.