Characterizations of strontium(II) and barium(II) adsorption from aqueous solutions using dolomite powder

In this research, adsorption technique was applied for strontium and barium removal from aqueous solution using dolomite powder. The process has been investigated as a function of pH, contact time, temperature and adsorbate concentration. The experimental data was analyzed using equilibrium isotherm, kinetic and thermodynamic models. The isotherm data was well described by Langmuir isotherm model. The maximum adsorption capacity was found to be 1.172 and 3.958 mg/g for Sr(II) and Ba(II) from the Langmuir isotherm model at 293 K, respectively. The kinetic data was tested using first and pseudo-second order models. The results indicated that adsorption fitted well with the pseudo-second order kinetic model. The thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also determined using the equilibrium constant value obtained at different temperatures. The results showed that the adsorption for both ions was feasible and exothermic.     

Adsorption of acid dyes from aqueous solutions by the ethylenediamine-modified magnetic chitosan nanoparticles

The adsorption characteristics of Acid Orange 7(AO7) and Acid Orange 10 (AO10) from aqueous solutions onto the ethylenediamine-modified magnetic chitosan nanoparticles (EMCN) have been investigated. The EMCN were essentially monodispersed and had a main particle size distribution of 15-40 nm and saturated magnetization of 25.6 emu/g. The adsorption experiments indicated that the maximum adsorption capacity occurred at pH 4.0 for AO7 and pH 3.0 for AO10, respectively. Due to the small diameter and the high surface reactivity, the adsorption equilibrium of AO7 and AO10 onto the EMCN reached very quickly. Equilibrium experiments fitted well with the Langmuir isotherm model, and the maximum adsorption capacity of the EMCN at 298K was determined to be 3.47 mmol/g for AO7 and 2.25 mmol/g for AO10, respectively. Thermodynamic parameters such as enthalpy change (ΔH°), free energy change (ΔG°) and entropy change (ΔS°) were estimated and the results indicated that the adsorption process was spontaneous and exothermic. Furthermore, the EMCN could be regenerated through the desorption of the dyes in NH(4)OH/NH(4)Cl solution (pH 10.0) and could be reused to adsorb the dyes again.     

Adsorption removal of cadmium and copper from aqueous solution by areca: a food waste

Areca waste (AW) has been investigated as metal biosorbent for cadmium and copper from aqueous solution for its availability as food waste and also for its cellulosic matrix rich of potential metal binding active sites. The effect of various parameters on adsorption process such as contact time, solution pH, amount of AW and initial concentration of metal ions was studied at room temperature to optimize the conditions for maximum adsorption. Maximum metal sorption was found to occur at pH 5.6. Adsorption process revealed that the initial uptake was rapid and equilibrium was established about in 1h for cadmium and copper. The equilibrium sorption data for single metal systems at pH 5.6 were described by the Langmuir, Freundlich and D-R isotherm models. The adsorption isotherm studies clearly indicated that the adsorptive behaviour of metal ions on AW not only the Langmuir assumptions but also the Freundlich and the D-R assumptions. The highest value of Langmuir maximum uptake, (b), was found for cadmium (1.12 mg/g) and copper (2.84 mg/g). Similar Freundlich empirical constants, K, were obtained for cadmium (1.086) and copper (1.119). Ion-exchange and surface adsorption might be involved in the adsorption process of cadmium and copper. Desorption studies revealed that cadmium and copper can be easily removed from AW by altering the pH values of the solution using HNO(3), indicating that AW are a promising adsorbent for wastewater treatment.     

Adsorption of lead(II) on O₂-plasma-oxidized multiwalled carbon nanotubes: thermodynamics, kinetics, and desorption

O(2)-plasma-oxidized multiwalled carbon nanotubes (po-MWCNTs) have been used as an adsorbent for adsorption of lead(II) in water. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy measurements show that the bulk properties of MWCNTs were not changed after O(2)-plasma oxidation. The adsorption capacity of MWCNTs for lead(II) was greatly enhanced after plasma oxidation mainly because of the introduction of oxygen-containing functional groups onto the surface of MWCNTs. The removal of lead(II) by po-MWCNTs occurs rather quickly, and the adsorption kinetics can be well described by the pseudo-second-order model. The adsorption isotherm of lead(II) onto MWCNTs fits the Langmuir isotherm model. The adsorption of lead(II) onto MWCNTs is strongly dependent upon the pH values. X-ray photoelectron spectroscopy analysis shows that the adsorption mechanism is mainly due to the chemical interaction between lead(II) and the surface functional groups of po-MWCNTs. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) calculated from the adsorption isotherms suggest that the adsorption of lead(II) onto MWCNTs is endothermic and spontaneous. The regeneration performance shows that lead(II) can be easily regenerated from po-MWCNTs by altering the pH values of the solution.     

Adsorptive removal of cationic (BY2) dye from aqueous solutions onto Turkish clay: Isotherm,kinetic, and thermodynamic analysis

ABSTRACT

The removal of Basic Yellow 2 (BY2), a cationic dye, from aqueous solution by using montmorillonite as adsorbent was studied in batch experiments. The effect of pH, agitation speed, adsorbent dosage, initial dye concentration ionic strength, and temperature on the removal of BY2 was also investigated. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherms were applied to fit the adsorption data of BY2 dye. Equilibrium data were well described by the typical Langmuir adsorption isotherm. The maximum monolayer adsorption capacity was calculated as 434.196 mg g^?1 from the Langmuir isotherm model. The adsorption data was fitted to both the pseudo-first-order, pseudo-second-order, Elovich, and intraparticle kinetic models, and the calculated values of the amount adsorbed at equilibrium (q_e) by pseudo-second-order equations were found to be in good agreement with the experimental values. The thermodynamic factors were also evaluated. The entropy change (ΔS*) was negative, suggesting that the adsorption process decreases in entropy and enthalpy change (ΔH*) was positive which indicates endothermic nature. The positive ΔG* value confirms the un-spontaneity of the process. In addition, a semiempirical model was calculated from kinetic data.     

坡缕石/氧化铝复合材料对水溶液中Cr(Ⅵ)的吸附效应

为了去除工业废水中的Cr(Ⅵ),采用氧化铝对坡缕石进行改性,以制备的坡缕石/氧化铝复合材料为吸附剂吸附水中的Cr(Ⅵ),研究了影响吸附效果的主要因素(吸附剂用量、溶液初始pH值、吸附时间)及吸附过程的动力学特征,并探讨了吸附平衡。结果表明:氧化铝包覆在坡缕石黏土表面形成了结构蓬松的复合物,当其用量为2.0 g/L时,吸附pH值小于6.0的溶液中Cr(Ⅵ)的效果较好,吸附平衡时间为90 min,吸附过程能较好地符合准二级动力学模型,吸附平衡可由Langmuir等温吸附方程描述,饱和吸附量为44.64 mg/g。     

Investigation of a basic dye removal from aqueous solution onto chemically modified Unye bentonite

The adsorption behavior of crystal violet (CV⁺) from aqueous solution onto magnesium-oxide coated bentonite (MCB) sample was investigated as a function of parameters such as initial CV⁺ concentration, contact time and temperature. The Langmuir, and Freundlich adsorption models were applied to describe the equilibrium isotherms. The Langmuir monolayer adsorption capacity of MCB were estimated as 496 mg/g. The pseudo-first-order, pseudo-second-order kinetic and the intra-particle diffusion models were used to describe the kinetic data and rate constants were evaluated. The values of the energy (E_a), enthalpy (ΔH^≠) and entropy of activation (ΔS^≠) were 56.45 kJ/mol, 53.90 kJ/mol and −117.26 J/mol K, respectively, at pH 6.5.     

The adsorption of Cd(II) ions on sulphuric acid-treated wheat bran

The adsorption of Cd(II) ions which is one of the most important toxic metals by using sulphuric acid-treated wheat bran (STWB) was investigated. The effects of solution pH and temperature, contact time and initial Cd(II) concentration on the adsorption yield were studied. The equilibrium time for the adsorption process was determined as 4 h. The adsorbent used in this study gave the highest adsorption capacity at around pH 5.4. At this pH, adsorption capacity for an initial Cd(II) ions concentration of 100 mg/L was found to be 43.1 mg/g at 25 degrees C for contact time of 4 h. The equilibrium data were analysed using Langmuir and Freundlich isotherm models to calculate isotherm constants. The maximum adsorption capacity (qmax) which is a Langmuir constant decreased from 101.0 to 62.5 mg/g with increasing temperature from 25 to 70 degrees C. Langmuir isotherm data were evaluated to determine the thermodynamic parameters for the adsorption process. The enthalpy change (deltaH(o)) for the process was found to be exothermic. The free energy change (deltaG(o)) showed that the process was feasible. The kinetic results indicated that the adsorption process of Cd(II) ions by STWB followed first-order rate expression and adsorption rate constant was calculated as 0.0081 l/min at 25 degrees C. It was observed that the desorption yield of Cd(II) was highly pH dependent.     

硫脲改性Fe_3O_4/壳聚糖微球对Hg~(2+)的吸附性能

利用反相悬浮分散法制备Fe3O4/壳聚糖磁性微球,并经硫脲改性(TMCS)用于吸附水溶液中Hg2+。考察了pH值、温度的影响,以及吸附动力学和吸附等温线。结果表明,TMCS为球形,粒径80μm～250μm。TMCS对Hg2+的吸附量随pH值升高而增加,但随温度升高而下降;焓变(ΔH0=-12.93kJ/mol)为负,表明吸附放热;Gibbs自由能(ΔG0=-16.41kJ/mol～-17.22kJ/mol)为负,表明吸附能自发进行。等温吸附线可用Langmuir模型拟合,最大吸附容量2.69mmol/g;吸附动力学可用拟二级模型拟合,表明化学吸附为控速步骤。吸附Hg2+后的TMCS可用0.01mol/L的EDTA脱附,脱附率达91%。     

Removal of Cu(II) ions by activated poplar sawdust (Samsun clone) from aqueous solutions

In this work, adsorption of Cu(II) ions on sawdust (SD) and activated sawdust (ASD) has been studied by using batch adsorption techniques. The equilibrium adsorption level was determined to be a function of the pH, initial Cu(II) concentration, and adsorbent dosage. The equilibrium nature of Cu(II) adsorption has been described by the Freundlich and Langmuir isotherms. The experimental adsorption data were fitted to the Langmuir adsorption model both sawdust and activated sawdust. The equilibrium capacity of sawdust and activated sawdust were 5.432 and 13.495 mg copper per g adsorbent, respectively at room temperature and natural pH. The maximum adsorption capacity was obtained at the maximum zeta potential value that -74.5 mV (pH 5) for activated sawdust and at -48.4 mV (pH 4) for sawdust. It was observed that activated sawdust was a suitable adsorbent than sawdust for removal of Cu(II) from aqueous solutions.     

Cation exchange removal of Cd from aqueous solution by NiO

Detailed adsorption experiments of Cd from aqueous solution on NiO were conducted under batch process with different concentrations of Cd, time and temperature of the suspension. The solution pH is found to play a decisive role in the metal ions precipitation, surface dissolution and adsorption of metal ions onto the NiO. Preliminary adsorption experiments show that the selectivity of NiO towards different divalent metal ions follows the trend Pb>Zn>Co>Cd, which is related to their first hydrolysis equilibrium constant. The exchange between the proton from the NiO surface and the metal from solution is responsible for the adsorption. The cation/exchange mechanism essentially remains the same for Pb, Zn, Co and Cd ions. The sorption of Cd on NiO particles is described by the modified Langmuir adsorption isotherms. The isosteric heat of adsorption (ΔH) indicates the endothermic nature of the cation exchange process. Spectroscopic analyses provide evidence that Cd is chemisorbed onto the surface of NiO.     

Silkworm exuviae--a new non-conventional and low-cost adsorbent for removal of methylene blue from aqueous solutions

In this paper, silkworm exuviae (SE) waste, an agricultural waste available in large quantity in China, was utilized as low-cost adsorbent to remove basic dye (methylene blue, MB) from aqueous solution by adsorption. Kinetic data and sorption equilibrium isotherms were carried out in batch process. The adsorption kinetic experiments revealed that MB adsorption onto SE for different initial dye concentrations all followed pseudo-second order kinetics and were mainly controlled by the film diffusion mechanism. Batch equilibrium results at different temperatures suggest that MB adsorption onto SE can be described perfectly with Freundlich isotherm model compared with Langmuir and D-R isotherm models, and the characteristic parameters for each adsorption isotherm were also determined. Thermodynamic parameters calculated show the adsorption process has been found to be endothermic in nature. The analysis for the values of the mean free energies of adsorption (E(a)), the Gibbs free energy (ΔG(0)) and the effect of ionic strength all demonstrate that the whole adsorption process is mainly dominated by ion-exchange mechanism, which has also been verified by variations in FT-IR spectra and pH value before and after adsorption and desorption studies. The results reveal that SE can be employed as a low-cost alternative to other adsorbents for MB adsorption.     

Copper(II) and zinc(II) biosorption on Pinus sylvestris L

The biosorption properties of copper(II) and zinc(II) onto a cone biomass of Pinus sylvestris L. was investigated by using batch techniques. The biosorption studies carried out with single metal solutions. The removal of copper(II) and zinc(II) from aqueous solution increased with pH and sharply decreased when pH of the solution was decreased. The maximum biosorption efficiency of P. sylvestris was 67% and 30% for Cu(II) and Zn(II), respectively. Batch kinetic and isotherm of biosorption metal ions were investigated. The second-order kinetic model was used to correlate the experimental data. The Freundlich and Langmuir model can describe the adsorption equilibrium of metal(II) on cone biomass. The biosorption constants were found from the Freundlich and Langmuir isotherms at 25 degrees C. It is found that the biosorption data of metals on cone biomass fitted both the Freundlich and Langmuir adsorption models.     

Biosorption of chromium(VI) ion from aqueous solutions using walnut, hazelnut and almond shell

The potential to remove Cr(VI) ion from aqueous solutions through biosorption using, the shells of Walnut (WNS) (Juglans regia), Hazelnut (HNS) (Corylus avellana) and Almond (AS) (Prunus dulcis) was investigated in batch experiments. The equilibrium adsorption level was determined to be a function of the solution contact time and concentration. Kinetic experiments revealed that the dilute chromium solutions reached equilibrium within 100 min. The biosorptive capacity of the shells was dependent on the pH of the chromium solution, with pH 3.5 being optimal. Adsorption of Cr(VI) ion uptake is in all cases pH-dependent showing a maximum at equilibrium pH values between 2.0 and 3.5, depending on the biomaterial, that correspond to equilibrium pH values of 3.5 for (WNS), 3.5 for (HNS) and 3.2 for (AS). The adsorption data fit well with the Langmuir isotherm model. The sorption process conformed to the Langmuir isotherm with maximum Cr(VI) ion sorption capacities of 8.01, 8.28, and 3.40 mg/g for WNS, HNS and AS, respectively. Percentage removal by WNS, HNS and AS was 85.32, 88.46 and 55.00%, respectively at a concentration of 0.5 mM. HNS presented the highest adsorption capacities for the Cr(VI) ion.     

Isotherm,kinetic, and thermodynamic studies on the adsorption behavior of malachite green dye onto montmorillonite clay

ABSTRACT

Systematic batch mode studies of adsorption of malachite green (MG) on montmorillonite clay were carried out as a function of process parameters which include pH, adsorbent dosage, agitation speed, ionic strength, initial MG concentration, and temperature. Montmorillonite was found to have excellent adsorption capacity. Equilibrium adsorption isotherms were measured for the single-component system, and the experimental data were analyzed by using Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm equations. It was found that the Langmuir equation appears to fit the equilibrium data. The monolayer (maximum) adsorption capacity (q_m) was found to be 262.494 mg g^?1 for montmorillonite. The experimental kinetic data were analyzed using the first-order, second-order, Elovich, and intraparticle kinetic models and the second-order kinetic model described the adsorption kinetics accurately for MG. Thermodynamic activation parameters such as ΔG*, ΔS*, and ΔH* of the adsorption of MG on montmorillonite were also calculated.     

Adsorption of chromium (VI) by ethylenediamine-modified cross-linked magnetic chitosan resin: isotherms, kinetics and thermodynamics

The adsorption of chromium (VI) ions from aqueous solution by ethylenediamine-modified cross-linked magnetic chitosan resin (EMCMCR) was studied in a batch adsorption system. Chromium (VI) removal is pH dependent and the optimum adsorption was observed at pH 2.0. The adsorption rate was extremely fast and the equilibrium was established within 6-10min. The adsorption data could be well interpreted by the Langmuir and Temkin model. The maximum adsorption capacities obtained from the Langmuir model are 51.813mgg(-1), 48.780mgg(-1) and 45.872mgg(-1) at 293, 303 and 313K, respectively. The adsorption process could be described by pseudo-second-order kinetic model. The intraparticle diffusion study revealed that film diffusion might be involved in the present case. Thermodynamic parameters revealed the feasibility, spontaneity and exothermic nature of adsorption. The sorbents were successfully regenerated using 0.1N NaOH solutions.     

Adsorption of phenol by MMT-CTAB and WPT-CTAB: Equilibrium,kinetic, and thermodynamic study

In this study, the phenol adsorption capacity of cetyltrimethylammonium bromide modified clays (MMT-CTAB) and cetyltrimethylammonium bromide modified pulp tea (WPT-CTAB) were studied. In batch adsorption experiments performed with MMT-CTAB, the effects of parameters such contact time, phenol concentration, pH of solution and adsorbent dosage were investigated. The effect of temperature on phenol adsorption onto MMT-CTAB and WPT-CTAB was examined; equilibrium and thermodynamic studies were completed. The highest phenol removal was found at pH 4.0 for MMT-CTAB and WPT-CTAB. To analyze the kinetics of phenol adsorption onto MMT-CTAB, the pseudo first-order and pseudo second-order kinetic models were applied. The kinetic data fitted better to the pseudo second-order model than the pseudo first-order kinetic model for MMT-CTAB. The characterization of adsorbents in phenol adsorption was clarified with the FTIR technique. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated for each adsorption process. The adsorption process was found to be exothermic and spontaneous for phenol adsorption by MMT-CTAB and WPT-CTAB. The results were analyzed with the Langmuir, Freundlich, Temkin and Harkins–Jura equations using linearized correlation coefficients at different temperatures. The Langmuir equation was found to best represent the equilibrium data for phenol adsorption onto MMT-CTAB and WPT-CTAB.     

Removal of Pb(II) ions from aqueous solutions by sulphuric acid-treated wheat bran

Sulphuric acid-treated wheat bran (STWB) was used as an adsorbent to remove Pb(II) ions from aqueous solution. It was observed that the adsorption yield of Pb(II) ions was found to be pH dependent. The equilibrium time for the process was determined as 2h. STWB gave the highest adsorption yield at around pH 6.0. At this pH, adsorption percentage for an initial Pb(II) ions concentration of 100mg/L was found to be 82.8 at 25 degrees C for contact time of 2h. The equilibrium data obtained at different temperatures fitted to the non-linear form of Langmuir, Freundlich and Redlich-Peterson and linear form of Langmuir and Freundlich models. Isotherm constants were calculated and compared for the models used. The maximum adsorption capacity (q(max)) which was obtained linear form of Langmuir model increased from 55.56 to 79.37mg/g with increasing temperature from 25 to 60 degrees C. Similar trend was observed for other isotherm constants related to the adsorption capacity. Linear form of Langmuir isotherm data was evaluated to determine the thermodynamic parameters for the process. Thermodynamic parameters show that adsorption process of Pb(II) ions is an endothermic and more effective process at high temperatures. The pseudo nth order kinetic model was successfully applied to the kinetic data and the order (n) of adsorption reaction was calculated at the range from 1.711 to 1.929. The values of k(ad) were found to be 5.82x10(-4) and 21.81x10(-4)(min(-1))(mg/g)(1-n) at 25 and 60 degrees C, respectively. Activation energy was determined as 29.65kJ/mol for the process. This suggest that the adsorption Pb(II) ions by STWB is chemically controlled.     

Comparative study of adsorption properties of Turkish fly ashes. II. The case of chromium (VI) and cadmium (II)

The purpose of the study described in this paper was to compare the removal of Cr(VI) and Cd(II) from an aqueous solution using two different Turkish fly ashes; Afsin-Elbistan and Seyitomer as adsorbents. The influence of four parameters (contact time, solution pH, initial metal concentration in solution and ash quality) on the removal at 20+/-2 degrees C was studied. Fly ashes were found to have a higher adsorption capacity for the adsorption of Cd(II) as compared to Cr(VI) and both Cr(VI) and Cd(II) required an equilibrium time of 2h. The adsorption of Cr(VI) was higher at pH 4.0 for Afsin-Elbistan fly ash (25.46%) and pH 3.0 for Seyitomer fly ash (30.91%) while Cd(II) was adsorbed to a greater extent (98.43% for Afsin-Elbistan fly ash and 65.24% for Seyitomer fly ash) at pH 7.0. The adsorption of Cd(II) increased with an increase in the concentrations of these metals in solution while Cr(VI) adsorption decreased by both fly ashes. The lime (crystalline CaO) content in fly ash seemed to be a significant factor in influencing Cr(VI) and Cd(II) ions removal. The linear forms of the Langmuir and Freundlich equations were utilised for experiments with metal concentrations of 55+/-2mg/l for Cr(VI) and 6+/-0.2mg/l for Cd(II) as functions of solution pH (3.0-8.0). The adsorption of Cr(VI) on both fly ashes was not described by both the Langmuir and Freundlich isotherms while Cd(II) adsorption on both fly ashes satisfied only the Langmuir isotherm model. The adsorption capacities of both fly ashes were nearly three times less than that of activated carbon for the removal of Cr(VI) while Afsin-Elbistan fly ash with high-calcium content was as effective as activated carbon for the removal of Cd(II). Therefore, there are possibilities for use the adsorption of Cd(II) ions onto fly ash with high-calcium content in practical applications in Turkey.     

Investigations of nickel(II) removal from aqueous solutions using tea factory waste

This paper presents the data for the effect of adsorbent dose, initial metal concentration, solution pH, agitating rate and temperature on the adsorption of nickel(II) on waste tea. Batch adsorption studies have been carried out. The equilibrium nature of nickel(II) adsorption at different temperature (25-60 degrees C) has been described by the Freundlich and Langmuir isotherm. The adsorption capacity (Q(0)) calculated from Langmuir isotherm was 15.26 mg Ni(II) g(-1) at initial pH of 4.0 at 25 degrees C. The results of the thermodynamic investigations indicate that the adsorption reactions are spontaneous (DeltaG degrees <0), slightly endothermic (DeltaH degrees > 0) and irreversible (DeltaS degrees > 0).