共查询到18条相似文献,搜索用时 78 毫秒
1.
刘德文 《有色金属(冶炼部分)》1985,(5)
热解羰基镍[Ni(CO)_4],使镍在某些基体表面沉积,可以获得表面光滑、无孔隙、无裂纹、无气泡的高纯镍镀层。文中详细介绍涂镀温度、压力、蒸气量、时间等因素对镀层质量的影响。 相似文献
2.
3.
4.
湿法成型在降低粉体团聚、改善素坯显微结构均匀性方面有着明显的优势。本工作采用乙醇为溶剂 ,PVB为分散剂和粘结剂 ,对以固相含量为 55% (质量分数 )的羰基镍粉悬浮液的制备和性能进行了研究。包括 :通过测定悬浮液的黏度和最终沉降体积确定最佳分散剂含量 ;含有粘结剂的悬浮液分两个阶段制备 :第一阶段悬浮液由羰基镍粉、乙醇和 0 2 % (质量分数 )PVB(分散剂 )组成 ,球磨 2 4h ,目的是打开颗粒团聚体和润湿粉料 ;第二阶段主要致力于悬浮液与粘结剂的混合 ,分别加入不同量的PVB ,球磨 2 4h。结果表明 ,分散剂含量为 0 2 %(质量分数 ) (相对于粉体 )时能使羰基镍粉末得到良好的分散。当粘结剂含量少于 6 % (质量分数 )时 ,在涂层坯体过程中容易出现裂纹 ,而粘结剂含量高于 6 %(质量分数 )时 ,悬浮液中含有较多的气泡。含 0 2 % (质量分数 )分散剂 ,6 % (质量分数 )粘结剂时可获得黏度适中 ,能够稳定悬浮的羰基镍粉悬浮液 相似文献
5.
6.
7.
8.
9.
10.
11.
通过羰基镍粉热处理对粉末结构和性能的影响研究,阐述了粉末热处理可以控制和调整粉末的性能和参数,使粉末产品达到国外同类产品的性能,更好地满足用户要求。 相似文献
12.
我国羰基镍工业的技术进步 总被引:7,自引:1,他引:6
本文试图从羰基镍产品 (纳米级镍粉、微米级镍粉、气相沉积复合粉 )的研究与开发、羰基镍生产设备与工艺、安全生产要点等方面小结我国羰基镍工业的技术进步 相似文献
13.
14.
15.
研究了镍矿中镍的质量分数(含量)的测定。以过氧化钠熔融、盐酸酸化为试料,在过硫酸铵存在下,以酒石酸钾钠掩蔽杂质,在氢氧化钠碱性介质中,用丁二酮肟与Ni~(2+)生成酒红色配合物,于波长480 nm处测其吸光度,该方法在生产中应用效果较好。 相似文献
16.
17.
《粉末冶金学》2013,56(23):157-168
AbstractThe dispersion-strengthening of carbonyl iron by alumina and zirconia has been found to be sensitive to particle morphology. This has been studied by optical and electron microscopy in samples representing each stage of various production sequences.In the case of alloys that had been sintered at 1350°C and then forged and cold rolled, alumina had a greater room-temperature-strengthening effect than did zirconia; whereas for alloys sintered at the same temperature but tested in the extruded condition there was no such difference. Furthermore, sintering at 1200°C followed by forging and cold rolling produced a similar degree of dispersion-strengthening for each of the two dispersoids. These observations are interpreted in terms of the variation of particle morphology with production history.Tensile properties were also determined in the range 20–600°C for alloys that had been sintered at 1350°C and extruded. The dispersion-strengthening effect decreased with increasing temperature in a manner that is consistent with the experimentally determined recrystallization temperature of these alloys. 相似文献
18.
屈子梅 《粉末冶金材料科学与工程》1997,(3)
羰基镍铁混合蒸气在中空筒体热解炉内共热解,可制得羰基镍铁粉,该粉再经还原与扩散处理,即成为羰基镍铁合金粉。本文指出了羰基镍铁的蒸气浓度、热解温度、原始粉的还原、扩散温度等工艺条件对合金粉的性能有直接影响,并讨论了羰基镍铁粉在粉末冶金制品中的应用。 相似文献