On-line measurement of the thickness and optical quality of float glass with a sensor based on a diffractive element

An on-line apparatus for accurate measurement of float-glass thickness and edge distortion was built and tested in industrial environments. The intelligent part of the sensor is a diffractive optical element. The theory and construction of the apparatus are described, and data from on-line measurements are presented.     

Quasi-absolute measurement of aspheres with a combined diffractive optical element as reference

We have already reported a method for the quasi-absolute test of rotationally symmetric aspheres by means of combined diffractive optical elements (combo-DOEs). The combo-DOEs carry the information for the ideal shape of an aspheric surface under test as well as a spherical wave for the measurement at the cat's eye position. An experimental demonstration of the procedure is given. Measurements with two different designs of combo-DOEs have been conducted, and their relative advantages and disadvantages are discussed.     

Algorithm based on rigorous coupled-wave analysis for diffractive optical element design

Diffractive optical element design is an important problem for many applications and is usually achieved by the Gerchberg-Saxton or the Yang-Gu algorithm. These algorithms are formulated on the basis of monochromatic wave propagation and the far-field assumption, because the Fourier transform is used to model the wave propagation. We propose an iterative algorithm (based on rigorous coupled-wave analysis) for the design of a diffractive optical element. Since rigorous coupled-wave analysis (instead of Fourier transformation) is used to calculate the light-field distribution behind the optical element, the diffractive optical element can thus be better designed. Simulation results are provided to verify the proposed algorithm for designing a converging lens. Compared with the well-known Gerchberg-Saxton and Yang-Gu algorithms, our method provides 7.8% and 10.8%, respectively, improvement in converging the light amplitude when a microlens is desired. In addition, the proposed algorithm provides a solution that is very close to the solution obtained by the simulated annealing method (within 1.89% error).     

Beam-shaping longitudinal range of a binary diffractive optical element

An experimental and theoretical investigation of laser beam shaping using a simple binary diffractive optic is presented. Beam tailoring has been characterized by the experimental determination of two relevant parameters: beam propagation factor M(2) and the beam-shaping longitudinal range, which represents the propagating distance for which the tailored beam remains nearly unchanged.     

Double diffractive optical element system for near-field shaping

Iterative algorithms based on Fourier transform are used for the design of diffractive optical elements (DOEs), which produce a given intensity distribution, usually at the far field. For the near field, these algorithms can also be used by changing the Fourier transform for the Fresnel transform. However, when the distance between the DOE and the observation plane is short, the results obtained with this modification are not always valid. In the present work, we develop a technique for obtaining the desired intensity distribution in the near field using two DOEs in tandem. We have designed an algorithm based on the standard Gerchberg-Saxton algorithm to determine the modulation of the two DOEs. The best results are obtained when the first DOE modulates the amplitude and the second DOE modulates the phase.     

Visible-band testbed projector with a replicated diffractive optical element

Raytheon has designed, fabricated, and tested a diffractive-optical-element-based (DOE-based) testbed projector for direct and indirect visual optical applications. By use of a low-cost replicated DOE surface from Rochester Photonics Corporation for color correction the projector optics bettered the modular transfer function of an equivalent commercial camera lens. The testbed demonstrates that a practical DOE-based optical system is suitable for both visual applications (e.g., head-mounted displays) and visual projection (e.g., tactical sensors). The need for and the proper application of DOE's in visual optical systems, the nature and the performance of the projector optical design, and test results are described.     

Vibrational circular dichroism in general anisotropic thin solid films: measurement and theoretical approach

In this study, the measurement of the true vibrational circular dichroism (VCD) spectrum is considered from an experimental and theoretical approach for any general anisotropic thin solid sample exhibiting linear as well as circular birefringence (LB, CB) and dichroism (LD, CD) properties. For this purpose, we have made use of a simple model alpha-helix polypeptide, namely, the poly(gamma-benzyl-L-glutamate) or PBLG, reference sample possessing a well-known VCD spectrum and giving rise to slightly oriented films by deposition onto a solid substrate. Also, we have used a different Fourier transform infrared modulation of polarization (PM-FTIR) optical setup with two-channel electronic processing in order to record the PM-VLD and PM-VCD spectra for various sample orientations in its film plane. All the corresponding general relations of the expected intensities in these experiments and the related properly designed calibration measurements were established using the Stokes-Mueller formalism; in addition, the residual birefringence of the optical setup and the transmittance anisotropy of the detector were estimated. From a comparative study of the results obtained in solution and in the solid state, we then propose a simple new experimental procedure to extract the true VCD spectrum of an oriented PBLG thin film: its consists of calculating the half-sum of two spectra recorded at theta and at theta +/- 90 degrees sample orientations. Moreover, the complete linear and circular birefringence and dichroism properties of the ordered PBLG thin film are estimated in the amide I and amide II vibrational regions. This allows us to establish for any sample orientation various theoretical simulations of the VCD spectra that agree nicely with the observed experimental results; this confirms that the measurement of LD and LB is in this case a prerequisite in simulating the true VCD spectrum of a partly oriented anisotropic sample. This validates our combined experimental and theoretical approach and opens the route to promising future vibrational CD studies on other macroscopic anisotropic thin film samples.     

Design of a diffractive optical element for pattern formation in a bilingual virtual keyboard

Pattern formation is one of the many applications of diffractive optical elements (DOEs) for display. Since DOEs have lightweight and slim nature compared to other optical devices, using them as image projection device in virtual keyboards is suggested. In this paper, we present an approach to designing elements that produce distinct intensity patterns, in the far field, for two wavelengths. These two patterns are images of bilingual virtual keyboard. To achieve this with DOEs is not simple, as they are inherently wavelength specific. Our technique is based on phase periodic characteristic of wavefront using iterative algorithm to design the phase profiles.     

基于倾角测试的桥梁变形实时监测研究

对基于结构的倾角测试能实时、精确得到结构变形,以悬臂梁及简支梁为例,推导倾角与挠度间关系,利用MATLAB编程工具对倾角进行积分、拟合得到结构变形,并通过钢梁加载试验与实测挠度进行对比,通过健康监测工程实例介绍倾角仪在变形监测中的应用。分析表明,建立的倾角和变形间关系合理可行,不同结构进行变形监测需考虑边界条件;基于MATLAB对倾角拟合挠度曲线过程简单,与实测挠度吻合较好;在桥梁健康监测系统中用倾角仪对结构进行变形监测,可得结构实时变形曲线与任一时刻变形规律。     

Extended focus diffractive optical element for Gaussian laser beams

The depth of focus of the Gaussian beam is extended by introducing a wavefront phase correction with properly designed diffractive optical elements. Results of the computer simulations show that, compared with other methods, the presented method demonstrates a reduced focal spot size and low sidelobes in a focal domain, within a considerable range of defocusing distances. Experimental results for the visible range diffractive optical element with a focus of 40 mm and a depth of focus that extends to 1 mm agree with the theory.     

基于FPGA的实时脉冲参数检测系统的设计

提出了一种基于可编程逻辑硬件结构的实时脉冲参数检测系统的方案,该方案对高速脉冲信号的采样序列建立微分门限算法,并以可编程逻辑硬件方式实现实时高效地获取脉冲特征参数。文中以大规模可编程器件为设计基础,以硬件描述语言为设计工具,详细地阐述了各功能模块的设计思路和具体实现方法,并进行了时效分析和功能仿真,为实时脉冲参数检测提供了一个简单有效的操作方案。     

Enantiomeric excess determination by fourier transform near-infrared vibrational circular dichroism spectroscopy: simulation of real-time process monitoring

The first use of near-infrared (NIR) Fourier transform vibrational circular dichroism (FT-VCD) to follow changes in the enantiomeric excess (EE) of chiral sample molecules in time using a flow-cell sampling apparatus is reported. Simultaneous changes in the fractional composition and the EE of a mixture of two different chiral molecules were monitored as a function of time. This simulates the progress of the chemical reaction from a chiral reactant to a chiral product where the mole fractions and EE values of both species may change with time. For the molecules studied, alpha-pinene, camphor, and borneol, the accuracy of following EE changes for one species alone is approximately 2%, while for simultaneously following EE changes in two species it is approximately 3% for 30 min sampling periods at 16 cm(-1) spectral resolution. These findings demonstrate the potential for VCD to be used in the NIR region for real-time monitoring of the composition and %EE of chemical reactions involving the synthesis of chiral molecules.     

Plasmonic circular dichroism of Peptide-functionalized gold nanoparticles

Nature is remarkable at tailoring the chirality of different biomolecules to suit specific functions. Chiral molecules can impart optical activity to achiral materials in the form of the particle's electronic transition frequency. Herein, we used peptides of differing secondary structures (random coil and α-helix) to artificially create optically active chiral gold nanoparticles through peptide-nanoparticle interactions as observed by circular dichroism (CD) spectroscopy. This interaction produces a CD signal at the plasmon resonance frequency (～520 nm) of the chiral peptide-nanoparticle complex. Aggregation of the peptide-coated nanoparticles using metal ions results in a red-shifted plasmonic CD response. Our results suggest that chiroptical properties of nanomaterials can be engineered using peptides.     

Dual source fourier transform polarization modulation spectroscopy: an improved method for the measurement of circular and linear dichroism

It is shown that the use of two sources in a four-port interferometer equipped with cube-corner mirrors leads to increased signal-to-noise ratios in Fourier transform (FT-IR) circular and linear dichroism spectra. The output beam to the sample is a superposition of two interferograms, one from each source, having opposite Fourier phases. These two interferograms cancel one another to the degree that the two sources are matched in intensity. If the radiation from each of the two sources is first polarized orthogonally with respect to the other and passed through a polarization modulator before reaching the sample, the resulting polarization-modulation interferograms are out of Fourier phase and out of polarization-modulation phase. As a result, the polarization-modulation interferograms, due to circular or linear dichroism in the sample, from the two sources combine positively rather than negatively. An improvement in signal-to-noise ratio of up to two (or a factor of four in scan-time reduction for the same signal-to-noise ratio) compared to single source operation can be realized, while at the same time, the potential for saturation of the detector signal is significantly reduced due to the reduction in magnitude of the combined ordinary infrared transmission interferogram. Absorption and circular dichroism spectra from a dual-source FT-IR spectrometer are presented and analyzed.     

Single-element diffractive optical system for real-time processing of synthetic aperture radar data

I present an optical system for the polar formatting of data in a spotlight-mode synthetic aperture radar. This system is implemented with only one diffractive optical element (DOE). Previously such a DOE could not be produced because the phase of the required transmission function of the DOE does not obey the continuity condition, which is a prerequisite for the conventional implementation of such optical transforms. Here I show how a DOE can be produced to perform the complete polar-formatting transform by incorporating branch-point phase singularities in the transmission function of the DOE. The computation of the transmission function is shown, and numerically computed diffraction patterns obtained from this DOE are also shown.     

Calcium fluoride micro cells for synchrotron radiation circular dichroism spectroscopy

De-mountable calcium fluoride micro cells have been developed for use in synchrotron radiation circular dichroism (SRCD) spectroscopy. They have the advantages that they require only very small sample volumes (as low as 1 microliter) and have short path lengths (as small as 2 micrometers). Highly reproducible spectra can be obtained in consecutive loadings with these spacer-free, fixed path length cells, which enable low wavelength data collection.     

Design and fabrication of a diffractive phase element for wavelength demultiplexing and spatial focusing simultaneously

The design of a diffractive phase element (DPE) that simultaneously implements wavelength demultiplexing and focusing is carried out on the basis of the general theory of amplitude-phase retrieval. The designed DPE is fabricated with optical contact lithography. Three masks are needed to produce the surface-relief structure of the DPE with eight quantized levels in depths. Experiments demonstrate that the designed DPE can successfully implement both the functions of demultiplexing three different-wavelength beams and focusing each component at a predesignated position simultaneously. Experimental measurements are in good agreement with the results of numerical simulations.