Validation of RELAP5/MOD3.2 model on trip off one main coolant pump for VVER 440/V230

This paper presents the validation of RELAP5/MOD3.2 model of the VVER 440 for Nuclear Power Plant (NPP) in the analysis of the following transient: “Trip off one MCP”.This validation is a process that compares the analytical results obtained by RELAP5/MOD3.2 model of the VVER 440 with measurement transient data received from Kozloduy NPP Unit #4. The baseline input deck for VVER440 was developed at the Institute for Nuclear Research and Nuclear Energy for analyses of operational occurrences, abnormal events, and design basis scenarios. It will provide a significant analytical capability for the Bulgarian technical specialists located at the Kozloduy NPP.The criteria used in selecting transient are: importance to safety, availability and suitability of data followed by suitability for RELAP5 code validation. The comparison between the RELAP5 calculations and the test data indicates a good agreement.This validation was possible through the participation of leading specialists from Kozloduy NPP and with the support of the Argonne National Laboratory, under the International Nuclear Safety Program (INSP) of the United States Department of Energy.     

RELAP5/MOD3.2 sensitivity calculations of loss-of-feed water (LOFW) transient at Unit 6 of Kozloduy NPP

This paper provides a comparison between the real plant data obtained by Unit 6 of Kozloduy nuclear power plant (NPP) during the loss-of-feed water (LOFW) transient and the calculation results received by RELAP5/MOD3.2 computer model of the same NPP unit.RELAP5/MOD3.2 computer model of the VVER-1000 has been developed at the Institute for Nuclear Research and Nuclear Energy-Bulgarian Academy of Sciences (INRNE-BAS) based on Unit 6 of Kozloduy NPP. This model has been used for simulation the behavior of the real VVER-1000 NPP during the LOFW transient. Several calculations have been provided to describe how the different boundary conditions reflect on the prediction of real plant parameters.This paper discusses the results of the thermal–hydraulic sensitivity calculations of loss-of-feed water transient for VVER-1000 reactor design. The report also contains a brief summary of the main NPP systems included in the RELAP5 VVER model and the LOFW transient sequences.This report was possible through the participation of leading specialists from Kozloduy NPP and with the assistance of Argonne National Laboratory (ANL) for the United States Department of Energy (US DOE), International Nuclear Safety Program (INSP).     

PSB-VVER simulation of Kozloduy NPP “loss of feed water transient”

This paper provides a comparison between the PSB test facility experimental results obtained during the simulation of loss of feed water transient (LOFW) and the calculation results received by INRNE computer model of the same test facility. Integral thermal-hydraulic PSB-VVER test facility located at Electrogorsk Research and Engineering Center on NPPs Safety (EREC) was put in operation in 1998. The structure of the test facility allows experimental studies under steady state, transient and accident conditions.RELAP5/MOD3.2 computer code has been used to simulate the loss of feed water transient in a PSB-VVER model. This model was developed at the Institute for Nuclear Research and Nuclear Energy for simulation of loss of feed water transient.The objective of the experiment “loss of feed water”, which has been performed at PSB-VVER test facility is simulation of Kozloduy NPP LOFW transient. One of the main requirements to the experiment scenario has been to reproduce all main events and phenomena that occurred in Kozloduy NPP during the LOFW transient. Analyzing the PSB-VVER test with a RELAP5/MOD3.2 computer code as a standard problem allows investigating the phenomena included in the VVER code validation matrix as “integral system effects” and ”natural circulation“. For assessment of the RELAP5 capability to predict the “Integral system effect” phenomenon the following RELAP5 quantities are compared with external trends: the primary pressure and the hot and cold leg temperatures. In order to assess the RELAP5 capability to predict the “Natural circulation” phenomenon the hot and cold leg temperatures behavior have been investigated.This report was possible through the participation of leading specialists from Kozloduy NPP and with the support of Argonne National Laboratory (ANL), under the International Nuclear Safety Program (INSP) of the United States Department of Energy.     

Comparison of hydrogen generation for TVSM and TVSA fuel assemblies for water water energy reactor (VVER)-1000

This paper presents the results received during investigation of hydrogen generation for both types fuel assemblies—the old modernistic type of fuel assemblies (TVSM) and recently installed new one alternative type of fuel assemblies (TVSA) in case of severe accident. There are some differences between both types FAs. They have different geometry as well as different burnable poisons. To investigate behavior of new fuel assemblies during the severe conditions it have been performed comparison of fuel behavior of old type TVSM fuel assembly to new one TVSA.To perform this investigation it has been used MELCOR “input model” for Kozloduy Nuclear Power Plant (KNPP) VVER 1000. The model was developed by Institute for Nuclear Research and Nuclear Energy-Bulgarian Academy of Sciences (INRNE-BAS) for investigation of severe accident scenarios and Probabilistic Safety Analyses (PSA) level 2. The model provides a significant analytical capability for the Bulgarian technical specialists, working in the field of the NPP safety, for analysis of core and containment damaged states and the estimation of radionuclides release outside fuel cladding.It was accepted criteria for vessel integrity about hydrogen concentration to be 8%. This criterion was based on the decision of RSK (Germany commission for reactor safety).Generally based on the received results it was made conclusion that using both types of fuel assemblies it was not disturbance safety conditions of NPP.     

多机组核电厂总体风险的一级PSA方法研究

福岛核事故发生后,多机组核电厂的总体风险受到越来越多的关注,但国内外缺乏评价多机组核电厂总体风险的方法或导则。本文结合有关法规对核电厂的总体安全要求,探索将单机组的一级概率安全评价（PSA）方法拓展为多机组的风险评价方法。以双机组核电厂为例,讨论了多机组厂址PSA定量化的一些问题,提出了机组间相关性的一些见解,并阐明了数学原理。本文讨论的方法对研究多机组厂址PSA方法具有重要价值。     

Comparison of RELAP5 calculations of VVER-1000 coolant transient benchmark phase 1 at different power

This paper provides comparisons between experimental data of “MCP switching on when the other three MCPs are in operation” and RELAP5 calculations with different initial levels of the reactor power 29.45% and 27.47% from the nominal.

The reference power plant for this analysis is Unit 6 at the Kozloduy nuclear power plant (NPP) site. RELAP5/MOD3.2 computer code has been used to simulate the investigated transient. Operational data from Kozloduy NPP have been used for the purpose of assessing how the RELAP5 model compares against plant data. During the plant-commissioning phase at Kozloduy NPP Unit 6 a number of experiments have been performed. One of them is switching on MCP when the other three MCPs are in operation.

This investigation was possible through the participation of leading specialists from Kozloduy NPP and with the support of Argonne National Laboratory, under the International Nuclear Safety Program (INSP) of the United States Department of Energy.     

Application of PSA Methodology to Design Improvement of JAERI Passive Safety Reactor (JPSR)

A probabilistic safety assessment (PSA) technique was applied to the design of JAERI Passive Safety Reactor (JPSR). A PSA was performed to clarify safety features and identify vulnerabilities of the original design. Based on the PSA results and considering thermal-hydraulic analyses and experiments, the JPSR design was improved to enhance plant safety. The improved design was re-evaluated with the PSA. Initiating events selected in this study were: large-break LOCA, medium- and small-break LOCAs, SGTR, main steam line break, loss of offsite power, loss of feed water, and other transients. Fault tree analyses were used to evaluate the system unavailabilities. The total core damage frequency due to internal events was estimated to be less than 10^?7/RY. The contribution of high frequency non-LOCA events could be significantly reduced by the design modification. The dominant initiating event was the small break LOCA and the dominant sequence was the failure of residual heat removal system. The present study indicated that the improved JPSR design has sufficient safety margin and the PSA methodology is very effective to improve reactor safety systems in a conceptual design phase.     

Assessment methodology for confidence in safety margin for large break loss of coolant accident sequences

Deterministic Safety Analysis and Probabilistic Safety Assessment (PSA) analyses are used to assess the Nuclear Power Plant (NPP) safety. The conventional deterministic analysis is conservative. The best estimate plus uncertainty analysis (BEPU) is increasingly being used for deterministic calculation in NPPs. The PSA methodology integrates information about the postulated accident, plant design, operating practices, component reliability and human behavior. The deterministic and probabilistic methodologies are combined by analyzing the accident sequences within design basis in the event trees of a postulated initiating event (PIE) by BEPU. The peak clad temperature (PCT) distribution provides an insight into the confidence in safety margin for an initiating event.     

福岛核事故后核电厂安全改进行动分析

介绍了福岛核事故后世界上主要核电国家相继开展的核电厂安全检查、再评价行动,并得出相应的检查和测试结论。法国、美国和中国等国家分别提出了福岛核事故后改进核电厂安全的建议、要求和行动,并制定了具体工程措施：在极端外部事件的设防,严重事故预防和缓解,水、电、通风实体改进,限制严重事故下的放射性释放和应急准备等主要方面开展的安全改进行动,将会提高核电厂的安全水平并提升缓解严重事故的能力。反思福岛核事故,总结福岛核事故对核电安全技术改进的促进作用,对未来核电安全技术的发展进行了展望。     

Uncertainty and sensitivity analyses of the Kozloduy pump trip test using coupled thermal–hydraulic 3D kinetics code

The modeling of complex transients in nuclear power plants (NPP) remains a challenging topic for best estimate three-dimensional coupled code computational tools. This technique is, nowadays, extensively used since it allows decreasing conservatism in the calculation models and performs more realistic simulation and more precise consideration of multidimensional effects under complex transients in NPPs. Therefore, large international activities are in progress aiming to assess the capabilities of coupled codes and the new frontiers for the nuclear technology that could be opened by this technique. In the current paper, a contribution to the assessment and validation of coupled code technique through the Kozloduy VVER100 pump trip test is performed. For this purpose, the coupled RELAP5/3.3-PARCS/2.6 code is used. The code results were assessed against experimental data. Deviations between code predictions and measurements are mainly due to the used models for evaluating and modeling of the Doppler feedback effect. Further investigations through the use of two “antagonist” uncertainty GRS and the CIAU methods, were considered in order to evaluate and quantify the origin of the observed discrepancies. It was revealed on one hand that relative error quantification discrepancies exist between the two approaches, and further enhancements for both methods are needed.     

核电站严重事故后果概率安全评价方法研究

核电站严重事故后果概率安全评价(PSA)是采用概率论的方法对核电站放射性后果进行分析,并定量给出放射性物质对核电站周围公众的健康效应影响。以国内某压水堆核电站为参考厂址,建立合适的场外后果分析模型。采用分层抽样方法对参考厂址1a的气象数据进行抽样,源项和释放特征等数据取自二级PSA的研究结果。利用事故后果评价程序对核电站严重事故后果进行计算,并用概率论方法对结果进行评估。通过计算将各事故和事故谱的场外个人剂量表示为CCDF曲线和总频率-剂量曲线,再用概率论方法得到不同距离处个人剂量超过指定剂量的条件概率;也可用此方法对确定烟羽应急计划区的安全准则中所描述的"大多数严重事故序列"进行量化。     

Thermal hydraulic behaviors during loss of RHR system at mid-loop operation of Chinese 300 MWe PWR NPP

Thermal hydraulic behavior of nuclear power plant (NPP) is analyzed by using mechanistic computer code for loss of residual heat removal (RHR) system during mid-loop operation of Chinese 300 MWe two-loop pressurized water reactor is presented. In the absence of recovery of RHR or other accident management measures, the reactor core will be uncovered for a long term resulting in core heat-up, degradation and relocation to the lower plenum. The effectiveness of available mitigate measures, such as safety injection system, gravity feed from refueling water storage tank (RWST) and steam generator (SG) reflux-condensation, are investigated. Coolant injection is highly effective in halting the accident progression and make the core recovered. The cooling capability of SG reflux-condensation has a relationship with different availabilities of steam generators and decay heat power. 6 days after shutdown, 2SG operation can keep the water level at mid-line of hot leg. 12 days after shutdown, both 2SG operation and 1SG operation can keep the water level at mid-line of hot leg. The analyses also indicate that the cooling mechanism of safety injection system is more effective than gravity feed from RWST and SG reflux-condensation. Through confirming the success criteria of SG reflux-condensation, time windows can be devided. Then, event trees for loss of RHR system under mid-loop operation are built with considering the analysis results and abnormal procedure.     

船舶核动力装置安全目标的初步研究

安全目标是核电厂进行安全评价的重要基础和判定准则,对安全评价工作具有非常重要的影响.目前,核电厂安全目标的认识和制定已经经历了较长的时间,形成了以国际原子能机构(IAEA)和美国核管会(NRC)为主的两大体系.文章概要地介绍了两个组织所确定的定性和定量安全目标,以及我国核电厂安全目标的发展和应用现状.最后,在吸收上述经...     

Severe accident mitigation strategy for the generation II PWRs in France – Some outcomes of the on-going periodic safety review of the French 1300 MWe PWR series

The 3rd Periodic Safety Review of the French 1300 MWe PWRs series includes some modifications to increase their robustness in case of a severe accident. Their review is based on both deterministic and probabilistic approaches, keeping in mind that severe accidents frequencies and radiological consequences should be as low as reasonably practicable, severe accidents management strategies should be as safe as possible and the robustness of equipment used for severe accident management should be ensured.Consequently, the IRSN level 2 probabilistic safety assessment (L2 PSA) studies for the 1300 MWe reactors have been used to re-assess the results of the utility's L2 PSA and rank them to identify the containment failure modes contributing the most to the global risk. This ranking helped the review of plant modifications.Regarding strategies for accident management, the EDF management of water in the reactor cavity during a severe accident for the 1300 MWe PWRs is presented as well as the IRSN position on this strategy: this is an example where the optimal severe accident management strategy choice is not so easy to define.Regarding the robustness of equipment used for severe accident management, the interest of a diversification or redundancy of the French emergency filtered containment venting opening is one example among many others.This paper presents the analysis conducted by IRSN during the 3rd periodic safety review of the French 1300 MWe PWRs. Future NPP upgrades to limit radioactive releases in case of containment filtered venting, to prevent containment venting and basemat melt-through are analysed in another framework (post-Fukushima and long-term operation projects).     

Accident management following loss-of-coolant accidents during cooldown in a Westinghouse two-loop PWR

Operation of pressurised water reactors involves shutdown periods for refuelling and maintenance. In preparation for this, the reactor system is cooled down, depressurised and partially drained. Although reactor coolant pressure is lower than during full-power operation, there remains the possibility of a loss-of-coolant accident (LOCA), with a certain but low probability. While the decay heat to be removed is lower than that from a LOCA at full power, the reduced availability of safety systems implies a risk of failing to maintain core cooling, and hence of core damage. This is recognised though probabilistic safety analyses (PSA), which identify low but non-negligible contributions to core damage frequency from accidents during cooldown and shutdown. Analyses are made for a typical two-loop Westinghouse PWR of the consequences of a range of LOCAs during hot and intermediate shutdown, 4 and 5 h after reactor shutdown respectively. The accumulators are isolated, while power to some of the pumped safety injection systems (SIs) is racked out. The study assesses the effectiveness of the nominally assumed SIs in restoring coolant inventory and preventing core damage, and the margin against core damage where their actuation is delayed. The calculations use the engineering-level MELCOR1.8.5 code, supplemented by the SCDAPSIM and SCDAP/RELAP5 codes, which provide a more detailed treatment of coolant system thermal hydraulics and core behaviour. Both treatments show that the core is readily quenched, without damage, by the nominal SI which assumes operation of only one pump. Margins against additional scenario and model uncertainties are assessed by assuming a delay of 900 s (the time needed to actuate the remaining pumps) and a variety of assumptions regarding models and the number of pumps available in conjunction with both MELCOR and versions of SCDAP. Overall, the study provides confidence in the inherent robustness of the plant design with respect to LOCA during cooldown to cold shutdown, and in the validity of a two-tier calculational method. The results have been directly used in updating the plant shutdown PSA, by changing the success criteria for core cooling during cooldown of the plant and showing a reduction in overall risk.     

压水堆核电站完全丧失给水引发的严重事故研究

采用严重事故最佳估算程序RELAP5/SCDAPSIM/MOD3.2，建立美国Surry-2核电站的详细计算模型，对完全丧失给水（TLFW）引发的堆芯熔化事故进行研究分析。为准确预测压力容器内堆芯熔化的进程，为二级概率安全评价提供可信的初始条件，计算中考虑了一回路压力边界的蠕变破裂失效，并评价了人为干预对堆芯熔化进程及事故后果的影响。计算结果表明，由完全丧失给水引发的压水堆核电站严重事故不会出现人们担心的高压熔堆；反应堆压力容器下封头的失效位置不是在其底部，而是在其侧面；通过打开稳压器释放阀对一回路实施主动卸压能够大大推迟事故的进程。     

Application of thermal comfort theory in probabilistic safety assessment of a nuclear power plant

Human factor errors in probabilistic safety assessment(PSA) of a nuclear power plant(NPP) can be prevented using thermal comfort analysis.In this paper,the THERP+HCR model is modified by using PMV (Predicted Mean Vote) and PPD(Predicted Percentage Dissatisfied) index system,so as to obtain the operator cognitive reliability,and to reflect and analyze human perception,thermal comfort status,and cognitive ability in a specific NPP environment.The mechanism of human factors in the PSA is analyzed by operators of skill,rule and knowledge types.The THERP+HCR model modified by thermal comfort theory can reflect the conditions in actual environment,and optimize reliability analysis of human factors.Improving human thermal comfort for different types of operators reduces adverse factors due to human errors,and provides a safe and optimum decision-making for NPPs.     

RELAP5/MOD3.2 investigation of a VVER-1000 MCP switching on Benchmark problem

This paper provides comparisons between experimental data of Kozloduy NPP “MCP switching on when the other three MCP are in operation”, with Relap5 calculations. The investigated thermal-hydraulic driven transient is characterized by spatially dependant non-symmetric processes. RELAP5/MOD3.2 computer code has been used to simulate the investigated transient. Operational data from Kozloduy NPP have been used for the purpose of assessing how the RELAP5 model compares against plant data. During the plant-commissioning phase at Kozloduy NPP Unit 6 a number of experiments have been performed. One of them is switching on MCP when the other three MCPs are in operation. The event is characterized by rapid increase in the flow through the core resulting in a coolant temperature decrease, which leads to insertion of positive reactivity due to the modeled feedback mechanisms. The main purpose of this investigation was to improve the discrepancy between the calculations and the plant data. The sensitivity calculation investigates the mixing in reactor vessel and influence of heat structure on the hot legs temperature. The areas of improvements to the Relap5 model are:

• •The non-symmetrical mixing in downcomer and reactor vessel annular exit.
• •The influence of heat structure temperature on the time delay for equipments measurements.
• •Investigation of pressurizer water level – using the hot legs temperature correction.

The RELAP5/MOD3.2 model of Kozloduy NPP VVER-1000 for investigation of operational occurrences, abnormal events, and design basis scenarios have been developed and validated in the Institute for Nuclear Research and Nuclear Energy – Bulgarian Academy of Sciences (INRNE-BAS) Sofia, and Kozloduy NPP. The model provides a significant analytical capability for the specialists working in the field of NPP safety.This investigation is a process that compares the analytical results obtained by the RELAP5 computer model of the VVER-1000 against the experimental transient data received from the Kozloduy NPP Unit 6. The comparisons indicate good agreement between the RELAP5 results and the experimental data. The sensitivity investigation improves the discrepancy between the calculation and the plant data.This investigation was possible through the participation of leading specialists from Kozloduy NPP and with the support of Argonne National Laboratory, under the International Nuclear Safety Program (INSP) of the United States Department of Energy.     

基于PSA技术的核电厂数字化仪控系统可靠性设计及应用

传统意义上核电厂数字化仪控系统主要依靠提升设备的可靠性来满足电厂安全目标。随着监管要求的逐步提高,在提升设备可靠性基础上,基于概率论技术的设计手段逐步成为核电厂安全设计新的研究方向。本文应用概率安全评价（PSA）技术,对典型电厂始发事件进行分析及研究,之后对仪控设计方案整体进行PSA建模,再将其置于电厂PSA模型中,通过定量评估分析,识别薄弱环节,给出优化改进措施。在此基础上提出了一套确保核电厂仪控系统满足整体安全目标的可靠性设计流程。      

Fuzzy probability on reliability study of nuclear power plant probabilistic safety assessment: A review

Fault tree analysis (FTA) is a graphical model which has been widely used as a deductive tool for nuclear power plant (NPP) probabilistic safety assessment (PSA). The conventional one assumes that basic events of fault trees always have precise failure probabilities or failure rates. However, in real-world applications, this assumption is still arguable. For example, there is a case where an extremely hazardous accident has never happened or occurs infrequently. Therefore, reasonable historical failure data are unavailable or insufficient to be used for statistically estimating the reliability characteristics of their components. To deal with this problem, fuzzy probability approaches have been proposed and implemented. However, those existing approaches still have limitations, such as lack of fuzzy gate representations and incapability to generate probabilities greater than 1.0E-3. Therefore, a review on the current implementations of fuzzy probabilities in the NPP PSA is necessary. This study has categorized two types of fuzzy probability approaches, i.e. fuzzy based FTA and fuzzy hybrid FTA. This study also confirms that the fuzzy based FTA should be used when the uncertainties are the main focus of the FTA. Meanwhile, the fuzzy hybrid FTA should be used when the reliability of basic events of fault trees can only be expressed by qualitative linguistic terms rather than numerical values.