Preparation of poly(styrene‐b‐2‐hydroxyethyl acrylate) block copolymer using reverse iodine transfer polymerization

Reverse iodine transfer polymerizations (RITP) of 2‐h‐ydroxyethyl acrylate (HEA) were performed in N,N‐dimethylformamide at 75°C using AIBN as initiator. Poly(2‐hydroxyethyl acrylate) (PHEA) with M_n = 3300 g mol^?1 and M_w/M_n <1.5 were obtained. Homopolymerization of styrene in RITP was also carried out under similar conditions using toluene as solvent. The resulting iodo‐polystyrene (PS‐I) with (M_{n, SEC} = 607 g mol^?1, polydispersity index (PDI) = 1.31) was used as a macroinitiator for the synthesis of amphiphilic block copolymers based on HEA with controlled well‐defined structure. Poly(styrene‐b‐2‐hydroxyethyl acrylate) (PS‐b‐PHEA) with M_n = 13,000 g mol^?1 and polydispersity index (M_w/M_n) = 1.4 was obtained, copolymer composition was characterized using ¹H‐NMR and FTIR, whereas SEC and gradient HPLC were used to confirm the formation of block copolymer and the living character of polymer chains. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and antitumour activity of medium molecular weight phthalimide polymers of camptothecin

Attachment of anticancer agents to polymers has been demonstrated to improve their therapeutic profiles. A new monomer containing camptothecin, 5‐norbonene‐endo‐2,3‐dicarboxylimidoundecanoyl‐camptothecin (NDUCPT) and its homopolymer and copolymer with acrylic acid (AA) were synthesized and spectroscopically characterized. The NDUCPT content in poly(NDUCPT‐co‐AA) obtained by elemental analysis was 51%. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 12 100, M_w = 23 400 g mol^?1, M_w/M_n = 1.93 for poly(NDUCPT), M_n = 15 400, M_w = 28 300 g mol^?1, M_w/M_n = 1.83 for poly(NDUCPT‐co‐AA). The IC₅₀ value of NDUCPT and its polymers against U937 cancer cells was larger than that of CPT. The in vivo antitumour activity of all polymers in Balb/C mice bearing the sarcoma 180 tumour cell line was greater than that of CPT at a dose of 100 mg kg^?1. Copyright © 2003 Society of Chemical Industry     

Synthesis of poly(styrene-b-isobutylene-b-styrene) triblock copolymer by ATRP

Summary A poly(styrene-b-isobutylene-b-styrene) triblock copolymer has been prepared by a two-step process. Polyisobutylene with M_n= 6600 and M_w/M_n= 1.12 functionalized with phenol at both ends was reacted with 2-bromopropionyl chloride to form a macroinitioator for atom transfer radical polymerization (ATRP). The synthesized difunctional PIB macroinitiator was subsequently heated with styrene xylene solution in the second step to 110°C under conditions for ATRP using the copper coordination complex CuBr/bipyridine. Both the macroinitiator and the triblock copolymer were characterized by ¹H NMR and SEC. The triblock copolymer with around 25% polystyrene was found to have a narrow molecular weight distribution of 1.20. Received: 4 October 1998/Revised version: 29 October 1998/Accepted: 3 November 1998     

Synthesis and characterization of AB‐type copolymers poly(L‐lactide)‐block‐poly(methyl methacrylate) via a convenient route combining ROP and ATRP from a dual initiator

Diblock copolymers of poly(L ‐lactide)‐block‐poly(methyl methacrylate) (PLLA‐b‐PMMA) were synthesized through a sequential two‐step strategy, which combines ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP), using a bifunctional initiator, 2,2,2‐trichloroethanol. The trichloro‐terminated poly(L ‐lactide) (PLLA‐Cl) with high molecular weight (M_n,GPC = 1–12 × 10⁴ g/mol) was presynthesized through bulk ROP of L ‐lactide (L ‐LA), initiated by the hydroxyl group of the double‐headed initiator, with tin(II) octoate (Sn(Oct)₂) as catalyst. The second segment of the block copolymer was synthesized by the ATRP of methyl methacrylate (MMA), with PLLA‐Cl as macroinitiator and CuCl/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as catalyst, and dimethyl sulfoxide (DMSO) was chosen as reaction medium due to the poor solubility of the macroinitiator in conventional solvents at the reaction temperature. The trichloroethoxyl terminal group of the macroinitiator was confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H‐NMR spectroscopy. The comprehensive results from GPC, FTIR, ¹H‐NMR analysis indicate that diblock copolymers PLLA‐b‐PMMA (M_n,GPC = 5–13 × 10⁴ g/mol) with desired molecular composition were obtained by changing the molar ratio of monomer/initiator. DSC, XRD, and TG analyses establish that the crystallization of copolymers is inhibited with the introduction of PMMA segment, which will be beneficial to ameliorating the brittleness, and furthermore, to improving the thermal performance. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Synthesis and biological activity of medium range molecular weight polymers containing exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid

A new monomer, exo‐3,6‐epoxy‐1,2,3,6‐tetrahydrophthalimidocaproic acid (ETCA), was prepared by reaction of maleimidocaproic acid and furan. The homopolymer of ETCA and its copolymers with acrylic acid (AA) or with vinyl acetate (VAc) were obtained by photopolymerizations using 2,2‐dimethoxy‐2‐phenylacetophenone as an initiator at 25 °C. The synthesized ETCA and its polymers were identified by FTIR, ¹H NMR and ¹³C NMR spectroscopies. The apparent average molecular weights and polydispersity indices determined by gel permeation chromatography (GPC) were as follows: M_n = 9600 g mol^?1, M_w = 9800 g mol^?1, M_w/M_n = 1.1 for poly(ETCA); M_n = 14 300 g mol^?1, M_w = 16 200 g mol^?1, M_w/M_n = 1.2 for poly(ETCA‐co‐AA); M_n = 17 900 g mol^?1, M_w = 18 300 g mol^?1, M_w/M_n = 1.1 for poly(ETCA‐co‐VAc). The in vitro cytotoxicity of the synthesized compounds against mouse mammary carcinoma and human histiocytic lymphoma cancer cell lines decreased in the following order: 5‐fluorouracil (5‐FU) ≥ ETCA > polymers. The in vivo antitumour activity of the polymers against Balb/C mice bearing sarcoma 180 tumour cells was greater than that of 5‐FU at all doses tested. © 2001 Society of Chemical Industry     

‘Living’ radical polymerization of styrene with AIBN/FeCl3/PPh3 initiating system via a reverse atom transfer radical polymerization process

Well‐defined polystyrenes with an α‐C(CH₃)₂(CN) and an ω‐chlorine atom end‐groups, and narrow polydispersity (M_n = 3000–4000 g mol⁻¹, M_w/M_n = 1.3–1.4) have been synthesized by a radical polymerization process using 2,2′‐azobisisobutyronitrile(AIBN)/FeCl₃/PPh₃ initiation system. When the ratio of [St]₀:[AIBN]₀:[FeCl₃]₀:[PPh₃]₀ is 200:1:4:12 at 110 °C, the radical polymerization is ‘living’, but the molecular weight of the polymers is not well‐controlled. The polymerization mechanism belongs to a reverse atom transfer radical polymerization (ATRP). Because the polymer obtained is end‐functionalized by a chlorine atom, it can then be used as a macroinitiator to perform a chain extension polymerization in the presence of CuCl/2,2′‐bipyridine catalyst system via a conventional ATRP process. The presence of a chlorine atom as an end‐group was determined by ¹H NMR spectroscopy. © 2000 Society of Chemical Industry     

Rapid living free‐radical polymerization of methyl acrylate under 60Co γ‐ray irradiation at room temperature

Rapid living free‐radical polymerization of methyl acrylate under ⁶⁰Co γ‐ray irradiation in the presence of benzyl 1H‐imidazole‐1‐carbodithioate at room temperature is reported. The results showed that the polymerization is a fast living process, and that the molecular weight of the polymer is as high as 39 600 g mol^?1 at 68 % conversion with M_w/M_n = 1.09 within 68 min. The polymerization rate was markedly influenced by the structures of thiocarbonylthio compounds. Copyright © 2004 Society of Chemical Industry     

Synthesis of aromatic carboxyl functionalized polymers by atom transfer radical polymerization

The synthesis of aromatic carboxyl functionalized polymers by atom transfer radical polymerization is described. The α‐bromo‐p‐toluic acid ( 1 ) initiated polymerization of styrene in the presence of copper(I) bromide and 2,2′‐bipyridyl affords quantitative yields of the corresponding aromatic carboxyl functionalized polystyrene ( 2 ). Polymerization proceeded via a controlled free radical process to afford quantitative yields of the corresponding aromatic carboxyl functionalized polymers with predictable molecular weights (M_n = 1600–25 900 g mol⁻¹), narrow molecular weight distribution (M_w /M_n = 1.1–1.40) and an initiator efficiency above 0.87. The polymerization process was monitored by gas chromatographic analysis. The functionalized polymers were characterized by thin layer chromatography, size exclusion chromatography, spectroscopy, potentiometry and elemental analysis. © 2000 Society of Chemical Industry     

Effect of acrylic acid neutralization on ‘livingness’ of poly[styrene‐ran‐(acrylic acid)] macro‐initiators for nitroxide‐mediated polymerization of styrene

BACKGROUND: The effect of acrylic acid neutralization on the degradation of alkoxyamine initiators for nitroxide‐mediated polymerization (NMP) was studied using styrene/acrylic acid and styrene/sodium acrylate random copolymers (20 mol% initial acrylate feed concentration) as macro‐initiators. The random copolymers were re‐initiated with fresh styrene in 1,4‐dioxane at 110 °C at SG1 mediator/BlocBuilder^® unimolecular initiator ratios of 5 and 10 mol%. RESULTS: The value of k_pK (k_p = propagation rate constant, K = equilibrium constant) was not significantly different for styrene/acrylic acid and styrene/sodium acrylate compositions at 110 °C (k_pK = 2.4 × 10^?6–4.6 × 10^?6 s^?1) and agreed closely with that for styrene homopolymerization at the same conditions (k_pK = 2.7 × 10^?6–3.0 × 10^?6 s^?1). All random copolymers had monomodal, narrow molecular weight distributions (polydispersity index M?_w/M?_n = 1.10–1.22) with similar number‐average molecular weights M?_n = 19.3–22.1 kg mol^?1. Re‐initiation of styrene/acrylic acid random copolymers with styrene resulted in block copolymers with broader molecular weight distributions (M?_w/M?_n = 1.37–2.04) compared to chains re‐initiated by styrene/sodium acrylate random copolymers (M?_w/M?_n = 1.33). CONCLUSIONS: Acrylic acid degradation of the alkoxyamines was prevented by neutralization of acrylic acid and allowed more SG1‐terminated chains to re‐initiate the polymerization of a second styrenic block by NMP. Copyright © 2008 Society of Chemical Industry     

Trimethylsilyl‐substituted triazole‐based ligand for copper‐mediated single‐electron transfer living radical polymerization of methyl methacrylate

The tripodal ‘click’ compound tris(4‐trimethylsilylmethyl‐1,2,3‐triazolylmethyl)amine (TTTA) was prepared and investigated as a ligand for copper‐catalysed single‐electron transfer living radical polymerization of methyl methacrylate (MMA). Bulk polymerizations catalysed by Cu⁰/CuBr₂/TTTA with a molar ratio of [MMA]₀/[ethyl‐2‐bromoisobutyrate]₀/[CuBr₂]₀/[TTTA]₀ = 200:2:1:1 and a 1.0 × 1.0 cm² Cu⁰ sheet were fast and well controlled (76% conversion with M_w/M_n = 1.19 after 3.5 h). Greater amounts of added air generally gave slower polymerizations although M_w/M_n remained low (<1.3) even when the polymerization was carried out under aerobic conditions. Decreasing initial concentrations of the Cu⁰/CuBr₂/TTTA catalyst system or polymerization temperatures also resulted in slower polymerizations and yielded polymers with broader dispersity. Kinetic studies in the temperature range 40–90 °C revealed an apparent activation energy of 22.6 kJ mol^?1. © 2014 Society of Chemical Industry     

Domain structure and miscibility studies of blends of styrene–butadiene–styrene block copolymers (SBS) and styrene–glycidyl methacrylate statistical copolymers (PS‐GMA) using SAXS and DMTA

The domain structure and miscibility in the solid state of a series of blends of styrene‐butadiene‐styrene (SBS) block copolymers and styrene‐glycidyl methacrylate (PS‐GMA) statistical copolymers with varying molecular weights and compositions were studied using small angle X‐ray scattering and dynamic mechanical thermal analysis. Depending on the molecular characteristics of each component, different types and degrees of solubilization of PS‐GMA in SBS were found which, in addition to the initially SBS phase morphology, lead to materials with multiphase domain morphologies with differences in size and structure. The degree of solubilization of PS‐GMA into the PS domains of SBS was found to be higher for blends containing PS‐GMA with lower molecular weight (M_w = 18 100 g mol^?1) and lower GMA content (1 wt%) and/or for SBS with higher PS content (39 wt%) and longer PS blocks (M_w = 19 600 g mol^?1). Localized solubilization of PS‐GMA in the middle of PS domains of SBS was found to be the most probable to occur for the systems under study, causing swelling of PS domains. However, uniform solubilization was also observed for SBS/PS‐GMA blends containing SBS with composition in the range of a morphological transition (PS block M_w = 19 600 g mol^?1 and 39 wt% of PS) causing a morphological transition in the SBS copolymer (cylinder to lamella). Copyright © 2006 Crown in the right of Canada. Published by John Wiley & Sons, Ltd     

Synthesis of poly(fluorinated styrene)‐block‐poly(ethylene oxide) amphiphilic copolymers via atom transfer radical polymerization: potential application as paper coating materials

BACKGROUND: The surface of a substrate which comprises a fibrous material is brought into contact with a type of amphiphilic block copolymer which comprises hydrophilic/hydrophobic polymeric blocks. These amphiphilic copolymers have been synthesized by atom transfer radical polymerization (ATRP) technique. The atom transfer radical polymerization of poly(2,3,4,5,6‐pentafluorostyrene)‐block‐poly(ethylene oxide) (PFS‐b‐PEO) copolymers (di‐ and triblock structures) with various ranges of PEO molecular weights was initiated by a PEO chloro‐telechelic macroinitiator. The polymerization, carried out in bulk and catalysed by copper(I) chloride in the presence of 2,2′‐bipyridine ligand, led to A–B–A amphiphilic triblock and A–B amphiphilic diblock structures. RESULTS: With most of the macroinitiators, the living nature of the polymerizations led to block copolymers with narrow molecular weight distributions (1.09 < M_w/M_n < 1.33) and well‐controlled molecular structures. These block copolymers turned out to be water‐soluble through adjustment of the PEO block content (>90 wt%). Of all the block copolymers synthesized, PFS‐b‐PEO(10k)‐b‐PFS containing 10 wt% PFS was found to retard water absorption considerably. CONCLUSION: The printability of paper treated with the copolymers was evaluated with contact angle measurements and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. Copyright © 2009 Society of Chemical Industry     

Primary amine functionalized polystyrenes by atom transfer radical polymerization

Primary amine functionalized polystyrenes were prepared in quantitative yields by atom transfer radical polymerization using the adduct of 1‐(bromoethyl)benzene with 1‐(4‐aminophenyl)‐1‐phenylethylene as initiator for styrene polymerization in the presence of a copper(I) bromide/N,N,N′,N′,N″‐pentamethyldiethylenetriamine catalyst system. The polymerizations proceeded via a controlled free radical polymerization process to afford quantitative yields of the corresponding primary amine functionalized polystyrenes with predictable molecular weights (M_n = 2 × 10³ to 10 × 10³ g mol^?1), relatively narrow molecular weight distributions (M_w/M_n = 1.03–1.49), well defined chain‐end functionalities and initiator efficiencies as high as 0.92. The polymerization process was monitored by gas chromatographic analysis. The primary amine functionalized polymers were characterized by thin layer chromatography, size exclusion chromatography, potentiometry and spectroscopy. Experimental results are consistent with quantitative functionalization via the 1,1‐diphenylethylene derivative. Polymerization kinetic measurements show that the polymerization reaction follows first order rate kinetics with respect to monomer consumption and the number average molecular weight increases linearly with monomer conversion. © 2003 Society of Chemical Industry     

Copolymerization of phenylisocyanate and ϵ‐caprolactone with rare earth chloride systems

A copolymer of phenylisocyanate (PhNCO) and ε‐caprolactone (CL) was synthesized by the rare earth chloride systems lanthanide chloride isopropanol complex (LnCl₃·3iPrOH) and propylene epoxide (PO). Polymerization conditions were investigated, such as lanthanides, reaction temperature, monomer feed ratio, La/PO molar ratio, and aging time of catalyst. The optimum conditions were: LaCl₃ preferable, [PhNCO]/[CL] in feed = 1 : 1 (molar ratio), 30°C, [monomer]/[La] = 200, [PO]/[La] = 20, aging 15 min, polymerization in bulk for 6 h. Under such conditions the copolymer obtained had 39 mol % PhNCO with a 78.2% yield, M_n = 20.3 × 10³, and M_w/M_n = 1.60. The copolymers were characterized by GPC, TGA, ¹H‐NMR, and ¹³C‐NMR, and the results showed that the copolymer obtained had a blocky structure with long sequences of each monomer unit. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2135–2140, 2007     

Structural effect of emulsifiers on the emulsion stability of a water/benzene mixture

Core–shell‐type microspheres with microphase‐separated shells of polystyrene (PS) and poly(ethylene glycol) (PEG) (microsphere_block: molar ratio: PS/PEG 49.1/45.9 mol %; M_w: PS chain: 1.07 × 10⁴, PEG chain 1.0 × 10⁴; the ratio of arm numbers of PEG to PS: 1.0; microsphere_graft: molar ratio: PS/PEG 33.8/55.9 mol %; M_w: PS chain: 1.54 × 10⁴, PEG chain 1.0 × 10⁴, the ratio of arm numbers of PEG to PS: 2.55) were synthesized by crosslinking of spherical domains of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(4‐vinyl pyridine) (P4VP) of the microphase‐separated films of poly(ethylene glycol)‐block‐poly(2‐hydroxyethyl methacrylate)‐block‐polystyrene triblock terpolymer (M_n: 2.18 × 10⁴; molar ratio: PS 49.1 mol %, PHEMA 5.0 mol %, PEG 45.9 mol %) and polystyrene‐block‐[poly(4‐vinyl pyridine)‐graft‐poly(ethylene glycol)] block–graft copolymer (M_n: 4.56 × 10⁴; molar ratio: PS 33.8 mol %, P4VP 10.3 mol %, PEG 55.9 mol %; branch number of PEG: 2.55), respectively. The structures of microphase‐separated films were investigated by transmission electron microscopy and small‐angle X‐ray scattering. The effects of the arm number ratio of PS to PEG and the total arm number on the stability of the water/benzene emulsion were investigated. The emulsion stability of oil in water was improved by using the microsphere synthesized with the microsphere_graft. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 321–331, 2004     

Dewetting and microphase separation in symmetric polystyrene‐block‐polyisoprene diblock copolymer ultrathin films

The kinetics of surface structure evolution in ultrathin films of low‐molecular‐weight polystyrene‐block‐polyisoprene (M_w: 7300 g mol^?1–7300 g mol^?1) diblock copolymer at temperatures below the bulk order‐to‐disorder transition temperature are presented. Films with two different thicknesses were studied as a function of annealing temperature using atomic force microscopy. These film thicknesses enabled the investigation of the competition between microphase separation and dewetting that resulted in two different morphologies: long‐range bicontinuous structures and random holes. Three distinctive stages of structure evolution were observed in bicontinuous structure, with the underlying mechanism compared with spinodal dewetting. Thicker films presented holes on their surfaces upon annealing at elevated temperatures, and kinetics of formation of the holes were discussed. We found that the molecular mobility determined the rates of dewetting, while the microphase separation hardly affected the dewetting process. © 2015 Society of Chemical Industry     

Synthesis and applications of triblock and multiblock copolymers using telechelic oligopropylene

Isotactic polypropylene (iPP)-polystyrene (PS) and iPP-poly(methyl methacrylate) (PMMA) multiblock copolymers were synthesized by atom transfer radical coupling (ATRC) of PS-iPP-PS and PMMA-iPP-PMMA triblock copolymers obtained by atom transfer radical polymerization (ATRP) of styrene (St) and methyl methacrylate (MMA), respectively, using α,ω-dibromoisobutyrateoligopropylene (iPP-Br) as a bifunctional macroinitiator. The iPP-Br was prepared by hydroxylation and subsequent esterification of telechelic oligopropylene having terminal vinylidene double bonds at both ends obtained by controlled thermal degradation of iPP. ATRP of St and (meth) acrylic monomers using iPP-Br formed the corresponding triblock copolymers. It was confirmed that the PMMA-iPP-PMMA triblock copolymer was effective as the compatibilizer for the iPP/PMMA blend. An iPP-PS multiblock copolymer (M_n: 25?000 g/mol and M_w/M_n: 4.1) was prepared by ATRC of PS-iPP-PS triblock copolymer (M_n: 8900 g/mol and M_w/M_n: 1.3). ATRC with St of PMMA-iPP-PMMA triblock copolymer (M_n: 13?000 g/mol and M_w/M_n: 1.4) provided an iPP-PMMA multiblock copolymer containing St chains (M_n: 39?000 g/mol and M_w/M_n: 2.8).     

Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process

Thermal polymerization of methyl (meth)acrylate (MMA) was carried out using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) and cumyl dithionaphthalenoate (CDN) as chain transfer agents. The kinetic study showed the existence of induction period and rate retardation, especially in the CDN mediated systems. The molecular weights of the polymers increased linearly with the monomer conversion, and the molecular weight distributions (M_w/M_ns) of the polymers were relatively narrow up to high conversions. The maximum number-average molecular weights (M_ns) reached to 351?900 g/mol (M_w/M_n = 1.47) and 442?400 g/mol (M_w/M_n = 1.29) in the systems mediated by CPDN and CDN, respectively. Chain-extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA-block-polystyrene (PMMA-b-PSt) copolymer with controlled structure and narrow M_w/M_n. Thermal polymerization of methyl acrylate (MA) in the presence of CPDN, or benzyl (2-phenyl)-1-imidazolecarbodithioate (BPIC) also demonstrated “living”/controlled features with the experimented maximum molecular weight 312?500 g/mol (M_w/M_n = 1.57). The possible initiation mechanism of the thermal polymerization was discussed.     

Influence of DMF on the polymerization of tert‐butyl acrylate initiated by 4‐oxo‐TEMPO‐capped polystyrene macroinitiator

BACKGROUND: In a number of studies it has been shown that 2,2,6,6‐tetramethylpiperidinooxy (TEMPO)‐mediated polymerization of acrylates is not facile. Therefore, the object of the study reported here was to prepare poly[styrene‐block‐(tert‐butyl acrylate)] (PS‐b‐PtBA) block copolymers using 4‐oxo‐TEMPO‐capped polystyrene macroinitiator as an initiator, in the presence of small amounts of N,N‐dimethylformamide (DMF). The kinetic analysis and the effect of DMF on the reaction mechanism are also discussed. RESULTS: PS‐b‐PtBA block copolymer was prepared through polymerization of tert‐butyl acrylate (tBA) initiated by 4‐oxo‐TEMPO‐capped polystyrene macroinitiator at 135 °C. The polymerization rate of tBA could be increased by adding a small amount of DMF, and the number average molecular weight of the PtBA block in PS‐b‐PtBA reached 10 000 g mol^?1 with narrow polydispersity. The activation rate constant k_act?tBA of alkoxyamine increased and the recombination rate constant k_rec?tBA decreased with increasing DMF concentration. CONCLUSION: DMF was shown to be a rate‐enhancing additive for the polymerization of tBA using a 4‐oxo‐TEMPO‐capped polystyrene macroinitiator. From the kinetic analysis, it was concluded that the improvement of polymerization with the addition of DMF was due to an increase in k_act?tBA and a decrease in k_rec?tBA. Copyright © 2008 Society of Chemical Industry