Structural shape and topology optimization of cast parts using level set method

This paper presents a level set‐based shape and topology optimization method for conceptual design of cast parts. In order to be successfully manufactured by the casting process, the geometry of cast parts should satisfy certain moldability conditions, which poses additional constraints in the shape and topology optimization of cast parts. Instead of using the originally point‐wise constraint statement, we propose a casting constraint in the form of domain integration over a narrowband near the material boundaries. This constraint is expressed in terms of the gradient of the level set function defining the structural shape and topology. Its explicit and analytical form facilitates the sensitivity analysis and numerical implementation. As compared with the standard implementation of the level set method based on the steepest descent algorithm, the proposed method uses velocity field design variables and combines the level set method with the gradient‐based mathematical programming algorithm on the basis of the derived sensitivity scheme of the objective function and the constraints. This approach is able to simultaneously account for the casting constraint and the conventional material volume constraint in a convenient way. In this method, the optimization process can be started from an arbitrary initial design, without the need for an initial design satisfying the cast constraint. Numerical examples in both 2D and 3D design domain are given to demonstrate the validity and effectiveness of the proposed method. Copyright © 2017 John Wiley & Sons, Ltd.     

Continuum structural topological optimizations with stress constraints based on an active constraint technique

Stress‐related problems have not been given the same attention as the minimum compliance topological optimization problem in the literature. Continuum structural topological optimization with stress constraints is of wide engineering application prospect, in which there still are many problems to solve, such as the stress concentration, an equivalent approximate optimization model and etc. A new and effective topological optimization method of continuum structures with the stress constraints and the objective function being the structural volume has been presented in this paper. To solve the stress concentration issue, an approximate stress gradient evaluation for any element is introduced, and a total aggregation normalized stress gradient constraint is constructed for the optimized structure under the r?th load case. To obtain stable convergent series solutions and enhance the control on the stress level, two p‐norm global stress constraint functions with different indexes are adopted, and some weighting p‐norm global stress constraint functions are introduced for any load case. And an equivalent topological optimization model with reduced stress constraints is constructed,being incorporated with the rational approximation for material properties, an active constraint technique, a trust region scheme, and an effective local stress approach like the qp approach to resolve the stress singularity phenomenon. Hence, a set of stress quadratic explicit approximations are constructed, based on stress sensitivities and the method of moving asymptotes. A set of algorithm for the one level optimization problem with artificial variables and many possible non‐active design variables is proposed by adopting an inequality constrained nonlinear programming method with simple trust regions, based on the primal‐dual theory, in which the non‐smooth expressions of the design variable solutions are reformulated as smoothing functions of the Lagrange multipliers by using a novel smoothing function. Finally, a two‐level optimization design scheme with active constraint technique, i.e. varied constraint limits, is proposed to deal with the aggregation constraints that always are of loose constraint (non active constraint) features in the conventional structural optimization method. A novel structural topological optimization method with stress constraints and its algorithm are formed, and examples are provided to demonstrate that the proposed method is feasible and very effective. © 2016 The Authors. International Journal for Numerical Methods in Engineering published by John Wiley & Sons Ltd.     

A level set–based method for stress-constrained multimaterial topology optimization of minimizing a global measure of stress

In multimaterial topology optimization of minimizing a global measure of stress, the maximum stresses in different materials may not satisfy the strength design requirements simultaneously if stress constraints for different materials are not considered. In this paper, a level set–based method is presented to handle the stress-constrained multimaterial topology optimization of minimizing a global stress measure. Specifically, a multimaterial level set model is adopted to describe the structural topology, and a stress interpolation scheme is introduced for stress evaluation. Then, a stress penalty-based topology optimization model is presented. Meanwhile, an adaptive adjusting scheme of the stress penalty factor is employed to improve the control of the local stress level. To solve the stress-constrained multimaterial topology optimization problem minimizing the global measure of stress, the parametric level set method is employed, and the sensitivity analysis is carried out. Numerical examples are provided to demonstrate the effectiveness of the presented method. Results indicate that multimaterial structures with optimized global stress can be gained, and stress constraints for different materials can be satisfied simultaneously.     

连续体结构的变密度拓扑优化方法研究

为了实现使连续体结构的体积约束和柔顺度最小的拓扑优化及解决采用经典变密度法引起的结构优化结果存在如灰度单元、棋盘格等数值不稳定问题，提出了一种新的拓扑优化方法。首先，采用改进的固体各向同性材料惩罚法作为材料插值方案，建立结构拓扑优化模型；其次，通过引入基于高斯权重函数的敏度过滤法和设计新灰度单元抑制算子来解决数值不稳定问题；最后，借助优化准则法求解优化模型。通过算例分析可知：新策略可以改进拓扑优化方法；新的拓扑优化方法具有收敛速度较快、能更好地获取柔顺度小且拓扑构型好的优化结构和抑制灰度单元产生等优势。研究结果为其他连续体结构的拓扑优化研究提供了新思路。     

A projection-based method for topology optimization of structures with graded surfaces

Graded surfaces widely exist in natural structures and inspire engineers to apply functionally graded (FG) materials to cover structural surfaces for performance improvement, protection, or other special functionalities. However, how to design such structures with FG surfaces by topology optimization is a quite challenging problem due to the difficulty for determining material properties of structural surfaces with prescribed variation rule. This paper presents a novel projection-based method for topology optimization of this class of FG structures. Firstly, a projection process is proposed for ensuring the material properties of the surfaces vary with a prescribed function. A criterion of determining the values of parameters in projection process is given by a strict theoretical derivation, and then, a new interpolation function is established, which is capable of simultaneously obtaining clear substrate topologies and realizable FG surfaces. Though such structures are actually multimaterial gradient structures, only the design variables of single-material topology optimization problem are needed. In the current research, the classical compliance minimization problem with a mass constraint is considered and the robust formulation is used to control the length scale of substrates. Several 2D and 3D numerical examples illustrate the validity and applicability of the proposed method.     

Topology optimization for unsteady flow

A computational methodology for optimizing the conceptual layout of unsteady flow problems at low Reynolds numbers is presented. The geometry of the design is described by the spatial distribution of a fictitious material with continuously varying porosity. The flow is predicted by a stabilized finite element formulation of the incompressible Navier–Stokes equations. A Brinkman penalization is used to enforce zero‐velocities in solid material. The resulting parameter optimization problem is solved by a non‐linear programming method. The paper studies the feasibility of the material interpolation approach for optimizing the topology of unsteady flow problems. The derivation of the governing equations and the adjoint sensitivity analysis are presented. A design‐dependent stabilization scheme is introduced to mitigate numerical instabilities in porous material. The emergence of non‐physical artifacts in the optimized material distribution is observed and linked to an insufficient resolution of the flow field and an improper representation of the pressure field within solid material by the Brinkman penalization. Two numerical examples demonstrate that the designs optimized for unsteady flow differ significantly from their steady‐state counterparts. Copyright © 2011 John Wiley & Sons, Ltd.     

Topology optimization of energy absorbing structures with maximum damage constraint

A novel density‐based topology optimization framework for plastic energy absorbing structural designs with maximum damage constraint is proposed. This framework enables topologies to absorb large amount of energy via plastic work before failure occurs. To account for the plasticity and damage during the energy absorption, a coupled elastoplastic ductile damage model is incorporated with topology optimization. Appropriate material interpolation schemes are proposed to relax the damage in the low‐density regions while still ensuring the convergence of Newton‐Raphson solution process in the nonlinear finite element analyses. An effective method for obtaining path‐dependent sensitivities of the plastic work and maximum damage via adjoint method is presented, and the sensitivities are verified by the central difference method. The effectiveness of the proposed methodology is demonstrated through a series of numerical examples. Copyright © 2017 John Wiley & Sons, Ltd.     

Robust compliance topology optimization based on the topological derivative concept

In this paper, we present an approach for robust compliance topology optimization under volume constraint. The compliance is evaluated considering a point‐wise worst‐case scenario. Analogously to sequential optimization and reliability assessment, the resulting robust optimization problem can be decoupled into a deterministic topology optimization step and a reliability analysis step. This procedure allows us to use topology optimization algorithms already developed with only small modifications. Here, the deterministic topology optimization problem is addressed with an efficient algorithm based on the topological derivative concept and a level‐set domain representation method. The reliability analysis step is handled as in the performance measure approach. Several numerical examples are presented showing the effectiveness of the proposed approach. Copyright © 2015 John Wiley & Sons, Ltd.     

Topology optimization with incompressible materials under small and finite deformations using mixed u/p elements

This paper focuses on topology optimization utilizing incompressible materials under both small‐ and finite‐deformation kinematics. To avoid the volumetric locking that accompanies incompressibility, linear and nonlinear mixed displacement/pressure (u/p) elements are utilized. A number of material interpolation schemes are compared, and a new scheme interpolating both Young's modulus and Poisson's ratio (E ‐ν interpolation) is proposed. The efficacy of this proposed scheme is demonstrated on a number of examples under both small‐ and finite‐deformation kinematics. Excessive mesh distortions that may occur under finite deformations are dealt with by extending a linear energy interpolation approach to the nonlinear u/p formulation and utilizing an adaptive update strategy. The proposed optimization framework is demonstrated to be effective through a number of representative examples.     

A mixed FEM approach to stress‐constrained topology optimization

We present an alternative topology optimization formulation capable of handling the presence of stress constraints in a straightforward fashion. The main idea is to adopt a mixed finite‐element discretization scheme wherein not only displacements (as usual) but also stresses are the variables entering the formulation. By doing so, any stress constraint may be handled within the optimization procedure without resorting to post‐processing operation typical of displacement‐based techniques that may also cause a loss in accuracy in stress computation if no smoothing of the stress is performed. Two dual variational principles of Hellinger–Reissner type are presented in continuous and discrete form that, which included in a rather general topology optimization problem in the presence of stress constraints that is solved by the method of moving asymptotes (Int. J. Numer. Meth. Engng. 1984; 24 (3):359–373). Extensive numerical simulations are performed and ongoing extensions outlined, including the optimization of elastoplastic and incompressible media. Copyright © 2007 John Wiley & Sons, Ltd.     

Multimaterial topology optimization with multiple volume constraints: Combining the ZPR update with a ground‐structure algorithm to select a single material per overlapping set

Multimaterial topology optimization often leads to members containing composite materials. However, in some instances, designers might be interested in using only one material for each member. Therefore, we propose an algorithm that selects a single preferred material from multiple materials per overlapping set. We develop the algorithm, based on the evaluation of both the strain energy and the cross‐sectional area of each member, to control the material profile (ie, the number of materials) in each subdomain of the final design. This algorithm actively and iteratively selects materials to ensure that a single material is used for each member. In this work, we adopt a multimaterial formulation that handles an arbitrary number of volume constraints and candidate materials. To efficiently handle such volume constraints, we employ the ZPR (Zhang‐Paulino‐Ramos) design variable update scheme for multimaterial optimization, which is based upon the separability of the dual objective function of the convex subproblem with respect to Lagrange multipliers. We provide an alternative derivation of this update scheme based on the Karush‐Kuhn‐Tucker conditions. Through numerical examples, we demonstrate that the proposed material selection algorithm, which can be readily implemented in multimaterial optimization, along with the ZPR update scheme, is robust and effective for selecting a single preferred material among multiple materials.     

A nodal variable method of structural topology optimization based on Shepard interpolant

A method for topology optimization of continuum structures based on nodal density variables and density field mapping technique is investigated. The original discrete‐valued topology optimization problem is stated as an optimization problem with continuous design variables by introducing a material density field into the design domain. With the use of the Shepard family of interpolants, this density field is mapped onto the design space defined by a finite number of nodal density variables. The employed interpolation scheme has an explicit form and satisfies range‐restricted properties that makes it applicable for physically meaningful density interpolation. Its ability to resolve more complex spatial distribution of the material density within an individual element, as compared with the conventional elementwise design variable approach, actually provides certain regularization to the topology optimization problem. Numerical examples demonstrate the validity and applicability of the proposed formulation and numerical techniques. Copyright © 2011 John Wiley & Sons, Ltd.     

A 3D upper bound limit analysis using radial point interpolation meshless method and second‐order cone programming

This paper presents a 3D formulation for quasi‐kinematic limit analysis, which is based on a radial point interpolation meshless method and numerical optimization. The velocity field is interpolated using radial point interpolation shape functions, and the resulting optimization problem is cast as a standard second‐order cone programming problem. Because the essential boundary conditions can be only guaranteed at the position of the nodes when using radial point interpolation, the results obtained with the proposed approach are not rigorous upper bound solutions. This paper aims to improve the computing efficiency of 3D upper bound limit analysis and large problems, with tens of thousands of nodes, can be solved efficiently. Five numerical examples are given to confirm the effectiveness of the proposed approach with the von Mises yield criterion: an internally pressurized cylinder; a cantilever beam; a double‐notched tensile specimen; and strip, square and rectangular footings. Copyright © 2016 John Wiley & Sons, Ltd.     

Discrete material optimization of general composite shell structures

A novel method for doing material optimization of general composite laminate shell structures is presented and its capabilities are illustrated with three examples. The method is labelled Discrete Material Optimization (DMO) but uses gradient information combined with mathematical programming to solve a discrete optimization problem. The method can be used to solve the orientation problem of orthotropic materials and the material selection problem as well as problems involving both. The method relies on ideas from multiphase topology optimization to achieve a parametrization which is very general and reduces the risk of obtaining a local optimum solution for the tested configurations. The applicability of the DMO method is demonstrated for fibre angle optimization of a cantilever beam and combined fibre angle and material selection optimization of a four‐point beam bending problem and a doubly curved laminated shell. Copyright © 2005 John Wiley & Sons, Ltd.     

Truss layout design under nonprobabilistic reliability-based topology optimization framework with interval uncertainties

A nonprobabilistic reliability-based topology optimization (NRBTO) method for truss structures with interval uncertainties (or unknown-but-bounded uncertainties) is proposed in this paper. The cross-sectional areas of levers are defined as design variables, while the material properties and external loads are regard as interval parameters. A modified perturbation method is applied to calculate structural response bounds, which are the prerequisite to obtain structural reliability. A deviation distance between the current limit state plane and the objective limit state plane, of which the expression is explicit, is defined as the nonprobabilistic reliability index, which serves as a constraint function in the optimization model. Compared with the deterministic topology optimization problem, the proposed NRBTO formulation is still a single-loop optimization problem, as the reliability index is explicit. The sensitivity results are obtained from an analytical approach as well as a direct difference method. Eventually, the NRBTO problem is solved by a sequential quadratic programming method. Two numerical examples are used to testify the validity and effectiveness of the proposed method. The results show significant effects of uncertainties to the topology configuration of truss structures.     

Composite material design of two‐dimensional structures using the homogenization design method

Composite materials of two‐dimensional structures are designed using the homogenization design method. The composite material is made of two or three different material phases. Designing the composite material consists of finding a distribution of material phases that minimizes the mean compliance of the macrostructure subject to volume fraction constraints of the constituent phases, within a unit cell of periodic microstructures. At the start of the computational solution, the material distribution of the microstructure is represented as a pure mixture of the constituent phases. As the iteration procedure unfolds, the component phases separate themselves out to form distinctive interfaces. The effective material properties of the artificially mixed materials are defined by the interpolation of the constituents. The optimization problem is solved using the sequential linear programming method. Both the macrostructure and the microstructures are analysed using the finite element method in each iteration step. Several examples of optimal topology design of composite material are presented to demonstrate the validity of the present numerical algorithm. Copyright © 2001 John Wiley & Sons, Ltd.     

Heaviside projection–based aggregation in stress‐constrained topology optimization

The paper introduces an approach to stress‐constrained topology optimization through Heaviside projection–based constraint aggregation. The aggregation is calculated by integrating Heaviside projected local stresses over the design domain, and then, it is normalized over the total material volume. Effectively, the normalized integral measures the volume fraction of the material that has violated the stress constraint. Hence, with the Heaviside aggregated constraint, we can remove the stress failed material from the final design by constraining the integral to a threshold value near zero. An adaptive strategy is developed to select the threshold value for ensuring that the optimized design is conservative. By adding a stress penalty factor to the integrand, the Heaviside aggregated constraint can further penalize high stresses and becomes more stable and less sensitive to the selection of the threshold value. Our two‐dimensional and three‐dimensional numerical experiments demonstrate that the single Heaviside aggregated stress constraint can efficiently control the local stress level. Compared with the traditional approaches based on the Kreisselmeier‐Steinhauser and p‐norm aggregations, the Heaviside aggregation–based single constraint can substantially reduce computational cost on sensitivity analysis. These advantages make it possible to apply the proposed approach to large‐scale stress‐constrained problems.     

A novel minimum weight formulation of topology optimization implemented with reanalysis approach

In this paper, we develop an efficient diagonal quadratic optimization formulation for minimum weight design problem subject to multiple constraints. A high-efficiency computational approach of topology optimization is implemented within the framework of approximate reanalysis. The key point of the formulation is the introduction of the reciprocal-type variables. The topology optimization seeking for minimum weight can be transformed as a sequence of quadratic program with separable and strictly positive definite Hessian matrix, thus can be solved by a sequential quadratic programming approach. A modified sensitivity filtering scheme is suggested to remove undesirable checkerboard patterns and mesh dependence. Several typical examples are provided to validate the presented approach. It is observed that the optimized structure can achieve lighter weight than those from the established method by the demonstrative numerical test. Considerable computational savings can be achieved without loss of accuracy of the final design for 3D structure. Moreover, the effects of multiple constraints and upper bound of the allowable compliance upon the optimized designs are investigated by numerical examples.     

A moving superimposed finite element method for structural topology optimization

Level set methods are becoming an attractive design tool in shape and topology optimization for obtaining efficient and lighter structures. In this paper, a dynamic implicit boundary‐based moving superimposed finite element method (s‐version FEM or S‐FEM) is developed for structural topology optimization using the level set methods, in which the variational interior and exterior boundaries are represented by the zero level set. Both a global mesh and an overlaying local mesh are integrated into the moving S‐FEM analysis model. A relatively coarse fixed Eulerian mesh consisting of bilinear rectangular elements is used as a global mesh. The local mesh consisting of flexible linear triangular elements is constructed to match the dynamic implicit boundary captured from nodal values of the implicit level set function. In numerical integration using the Gauss quadrature rule, the practical difficulty due to the discontinuities is overcome by the coincidence of the global and local meshes. A double mapping technique is developed to perform the numerical integration for the global and coupling matrices of the overlapped elements with two different co‐ordinate systems. An element killing strategy is presented to reduce the total number of degrees of freedom to improve the computational efficiency. A simple constraint handling approach is proposed to perform minimum compliance design with a volume constraint. A physically meaningful and numerically efficient velocity extension method is developed to avoid the complicated PDE solving procedure. The proposed moving S‐FEM is applied to structural topology optimization using the level set methods as an effective tool for the numerical analysis of the linear elasticity topology optimization problems. For the classical elasticity problems in the literature, the present S‐FEM can achieve numerical results in good agreement with those from the theoretical solutions and/or numerical results from the standard FEM. For the minimum compliance topology optimization problems in structural optimization, the present approach significantly outperforms the well‐recognized ‘ersatz material’ approach as expected in the accuracy of the strain field, numerical stability, and representation fidelity at the expense of increased computational time. It is also shown that the present approach is able to produce structures near the theoretical optimum. It is suggested that the present S‐FEM can be a promising tool for shape and topology optimization using the level set methods. Copyright © 2005 John Wiley & Sons, Ltd.