Composite double network hydrogels with thermoresponsive colloidal nanoemulsions

We report the formulation and mechanical characterization of double network (DN) composite hydrogels. The first network consists of covalently crosslinked poly(ethylene glycol diacrylate) (PEGDA), which forms a strong, brittle network that provides elasticity to the gel. The second network, sodium alginate, is ionically crosslinked with Ca²⁺ to allow increased dissipation of mechanical energy. The novelty of this system over existing DN hydrogels is the additional incorporation of a third mesoscale network, composed of thermoresponsive poly(dimethyl siloxane) (PDMS) nanoemulsions, which undergo colloidal gelation through the bridging of the PEGDA hydrophobic end groups into the PDMS droplets. The colloidally gelled microstructures are photopolymerized into a solid hydrogel by crosslinking the precursors with ultraviolet (UV) light. Tensile mechanical experiments performed on the crosslinked DN nanoemulsion hydrogels show that their rupture stress (0.17–0.34 MPa), fracture energy (144–421 J/m²), and Young's modulus (1–2.1 MPa) are comparable to similar systems in the literature. These mechanical measurements suggest that the gels may be suitable for manufacturing processes in which large shear rates and deformations are encountered.     

Templating polyacrylamide hydrogel for interconnected microstructure and improved performance

In this study, the pressure and temperature are monitored during acrylamide polymerization and their effects on the mechanical properties and swelling of the resulting hydrogel are investigated. The polymerization kinetic and network formation mechanism are correlated to the environmental thermodynamic conditions under which the hydrogels are polymerized. Then, the swelling and Young's modulus are measured and shown to be tunable along a wide range of values. The swelling ratio varies between 50 and 2262 while Young's modulus varies between 10.99 and 40.70 kPa. In addition, the formation of macroporous hydrogel with channel like structures along the vacuum direction under a reduced pressure of 5 mbar is reported. The macroporous hydrogel has a modulus of 40.70 kPa and shrink approximatively three times faster than the hydrogel polymerized under normal pressure and has a modulus of 10.99 kPa. Hence, this interconnected network can overcome the fluid diffusion limitations of bulk hydrogels without compromising the mechanical properties. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46205.     

Poly(2‐hydroxyethyl methacrylate) hydrogel: from a brittle material to a nanofilled semi‐interpenetrating polymer network with potential application in wound dressings

In this work we report the photopolymerization of poly(2‐hydroxyethyl methacrylate) (PHEMA) together with a hydrophilic chitosan derivate (carboxymethyl‐chitosan) to yield a semi‐interpenetrating polymer network (semi‐IPN) that was filled with poly(N‐vinylcaprolactam)/poly(ethylene glycol methacrylate) core–shell nanogels in order to enhance the mechanical properties of the resulting hydrogels. The mechanical properties of the nanofilled semi‐IPNs were found to be more suitable for wound dressing applications than the PHEMA hydrogel as described by dynamic mechanical analysis in dry form and submerged in water. This was evidenced by a higher Young's modulus and higher elongation at break in the semi‐IPNs compared to blank PHEMA hydrogels. Furthermore, when the hydrogels were filled with nanogels, there was an elongation at break similar to that of skin with only a slightly lower Young's modulus. © 2019 Society of Chemical Industry     

Rheological characterization of mechanical properties of chemically crosslinked microspheres

This work presents a rheological method to characterize degradation of microspheres made of chemically crosslinked hydrogels. Conditions to measure rheological properties of microspheres, remaining as individual microspheres during measurement, were established. Relevant and reproducible measurements could be obtained with a rheometer equipped with a parallel plate geometry in which a homogenous and continuous monolayer of microspheres was inserted in a gap between the plates. The storage modulus of microspheres was determined under an imposed strain of 0.04% with an oscillatory measurement mode at various frequencies. The microspheres showed almost purely elastic behavior while their storage modulus was affected by the degree of crosslinking. In the second part of the work, the rheological method was applied to investigate the degradation of microspheres made of a hydrolyzable crosslinked hydrogel. The method was found suitable by measuring the storage modulus over time. A good correlation was identified between acidification of the incubation medium because of the release of degradation products and the decrease of the storage modulus of the microspheres indicating a reduction in the crosslinking of the hydrogel resulting from the degradation process. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Development of Biocompatible and Antibacterial Collagen Hydrogels via Dialdehyde Polysaccharide Modification and Tetracycline Hydrochloride Loading

Nowadays, collagen hydrogels with both good physicochemical and antibacterial properties for tissue engineering have drawn broad attention. Herein, a biocompatible and antibacterial collagen hydrogel is developed via alginate dialdehyde (ADA) modification and tetracycline hydrochloride (TC) loading based on Schiff's base formation. Fourier transform infrared spectroscopy and X‐ray diffraction spectra suggest the maintenance of collagen structure integrity after ADA modification. The modification significantly contributes to the improved swelling property, resistance against type I collagenase, and strengthens storage modulus of hydrogels with an increase of ADA concentrations. Meanwhile, dynamic release curves of tetracycline hydrochloride (TC)‐loaded hydrogels describe the burst release at the first 15 min then a gradual release, hydrogels act ideally as carriers in antibacterial activity. Furthermore, in vitro biocompatibility and antibacterial properties are successfully confirmed from the fabricated collagen hydrogels. This physicochemical‐ and antibacterial‐property–improved collagen hydrogel would be a potential candidate for wound healing as a scaffold.     

Crosslinking structures of gelatin hydrogels crosslinked with genipin or a water‐soluble carbodiimide

It was suggested in our previous studies that carbodiimide‐ and genipin‐crosslinked gelatin hydrogels could be used as bioadhesives to overcome the cytotoxicity problem associated with formaldehyde‐crosslinked gelatin hydrogels. In this study, we investigated the crosslinking structures of carbodiimide‐ and genipin‐crosslinked gelatin hydrogels. We found that crosslinking gelatin hydrogels with carbodiimide or genipin could produce distinct crosslinking structures because of the differences in their crosslinking types. Carbodiimide could form intramolecular crosslinks within a gelatin molecule or short‐range intermolecular crosslinks between two adjacent gelatin molecules. On the basis of gel permeation chromatography, we found that the polymerization of genipin molecules could occur under the conditions used in crosslinking gelatin hydrogels via a possible aldol condensation. Therefore, besides intramolecular and short‐range intermolecular crosslinks, additional long‐range intermolecular crosslinks could be introduced into genipin‐crosslinked gelatin hydrogels. Crosslinking a gelatin hydrogel with carbodiimide was more rapid than crosslinking with genipin. Therefore, the gelation time for the carbodiimide‐crosslinked gelatin hydrogels was significantly shorter than that of the genipin‐crosslinked gelatin hydrogels. However, the cohesive (interconnected) structure of the carbodiimide‐crosslinked gelatin hydrogels was readily broken because, unlike the genipin‐crosslinked gelatin hydrogels, there were simply intramolecular and short‐range intermolecular crosslinks present in the carbodiimide‐crosslinked hydrogel. In the cytotoxicity study, the carbodiimide‐crosslinked gelatin hydrogels were dissolved into small fragments in the cultural medium within 10 min. In contrast, the genipin‐crosslinked gelatin hydrogels remained intact in the medium throughout the entire course of the study. Again, this may be attributed to the differences in their crosslinking structures. The genipin‐crosslinked gelatin hydrogels were less cytotoxic than the carbodiimide‐crosslinked gelatin hydrogels. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4017–4026, 2004     

Hydrogels based on graft copolymers of collagen synthesis

Graft copolymerization of 2-hydroxyethyl methacrylate in combination with hydrophobic monomers onto soluble collagen was employed in the synthesis of hydrogels. The hydrogels were formed by simultaneous graft copolymerization and crosslinking. In order to study the effect of various crosslinking agents on the water retention character of the hydrogels, three different crosslinking agents, namely, N,N′-methylene bis acrylamide, 1,4-butanediol dimethacrylate, and hexamethylene urethanediacrylate were used. Hexamethylene urethanediacrylate crosslinked systems require a minimum amount of crosslinking agent to attain maximum water content in comparison to the other systems.     

A novel,efficient route for the crosslinking and creep improvement of high modulus and high strength polyethylene fibres

A new route is presented for the chemical crosslinking of solution‐spun, ultra‐drawn Ultra‐High‐Molecular‐Weight Polyethylene (UHMW‐PE) fibres. UHMW‐PE fibres with a range of draw ratio's, Young's moduli and tensile strengths were impregnated with a radical initiator using supercritical carbon dioxide as a carrier. After impregnation, the drawn fibres were crosslinked with ultra‐violet light and fibres with a high gel content (> 90%) were obtained. It was found that the chemical crosslinking strongly reduces the plateau creep rate of the fibres and that the threshold stress for irreversible creep is enhanced. Simultaneously, the high Young's modulus and the high tensile strength of the drawn fibres are preserved which illustrates that the long term properties of the fibres (i. e. creep) are improved without a large sacrifice short term mechanical properties such as Young's modulus.     

Thermosensitive elastin-derived polypeptide hydrogels crosslinked by genipin

In this paper, first, elastin-derived peptides (EPs) with low molecular weight were prepared by acid degradation. Second, elastin-derived peptide hydrogels were fabricated by crosslinking EP with genipin. EP exhibited an inverse transition temperature, and the inverse transition temperature (T_t) could be adjusted by changing the concentration and molecular weight of EP, pH, and adding salt. The freeze-dried EP hydrogels were obviously three-dimensional network structure and the property of EP hydrogel can be optimized by dosage of genipin. Differential scanning calorimetry (DSC) tests and the swelling ratio changing with temperature showed the crosslinked EP hydrogels were still thermosensitive and exhibited a negative swelling behavior. The compression modulus of EP hydrogels can even reach 39.4?kPa, surpassing many other elastin-based hydrogels. This genipin crosslinked EP hydrogel is a good biological material and has great potentiality in tissue engineering.     

Compressive Strength and Bioactivity Properties of Photopolymerizable Hybrid Composite Hydrogels for Bone Tissue Engineering

The drug release capabilities of synthetic bone scaffolds have often been overlooked. In this study novel poly(ethylene) glycol and beta-tricalcium phosphate hydrogel composites were photopolymerized and evaluated in terms of mechanical strength, bioactivity, antimicrobial release profile, and the efficacy of released antimicrobials. Young's modulus values ranged between 4.36 and 8.70 MPa. This increase was associated with the physical bonding interaction between polymer and bioceramic. Bioactivity was confirmed by the formation of globular crystals. Drug release studies showed the diffusion of vancomycin from hydrogel composites can be controlled by the hydrogels’ three-dimensional structure. Moreover, vancomycin loaded samples showed activity against Staphylococcus aureus.     

Mechanical properties of interpenetrating polymer network hydrogels based on hybrid ionically and covalently crosslinked networks

Hydrogels are polymer networks swollen in water. Because of their soft and wet nature, and their ability to show large volume changes, hydrogels can be useful in many biomedical and actuator applications. In these applications, it is crucial to tune the mechanical and physical properties of a hydrogel in a controllable manner. Here, interpenetrating polymer networks (IPNs) made of a covalently crosslinked network and an ionically crosslinked network were produced to investigate the effective parameters that control the physical and mechanical properties of an IPN hydrogel. Covalently crosslinked polyacrylamide (PAAm) or poly(acrylic acid) (PAA) networks were produced in the presence of alginate (Alg) that was then ionically crosslinked to produce the IPN hydrogels. The effect of ionic crosslinking, degree of covalent crosslinking, AAm : Alg and AA : Alg ratio on the swelling ratio, tensile properties, indentation modulus, and fracture energy of IPN hydrogels was studied. A hollow cylindrical hydrogel with gradient mechanical properties along its length was developed based on the obtained results. The middle section of this hydrogel was designed as a pH triggered artificial muscle, while each end was formulated to be harder, tougher, and insensitive to pH so as to function as a tendon‐like material securing the gel muscle to its mechanical supports. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 2504–2513, 2013     

Polystyrene composites containing crosslinked polystyrene‐multiwalled carbon nanotube balls

Crosslinked polystyrene‐multiwalled carbon nanotube (PS‐MWCNT) balls, which act as conductive microfillers, were prepared by the in situ suspension polymerization of styrene with MWCNTs and divinyl benzene (DVB) as a crosslinking agent. The diameters of the synthesized crosslinked PS‐MWCNT balls ranged from 10 to 100 μm and their electrical conductivity was about 7.7 × 10^?3 S/cm. The morphology of the crosslinked PS‐MWCNT balls was observed by scanning electron microscopy and transmission electron microscopy. The change in the chemical structure of the MWCNTs was confirmed by Raman spectroscopy and Fourier transform infrared spectroscopy. The mechanical and electrical properties of the PS/crosslinked PS‐MWCNT ball composites were investigated. It was found that the tensile strength, ultimate strain, Young's modulus, and impact strength of the PS matrix were enhanced by the incorporation of the crosslinked PS‐MWCNT balls. In addition, the mechanical properties of the PS/crosslinked PS‐MWCNT ball composites were better than those of the PS/pristine MWCNT composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Silicone hydrogels based on a novel amphiphilic poly(2‐methyl‐2‐oxazoline)‐b‐poly(dimethyl siloxane) copolymer

A novel amphiphilic hydrogel based on poly(2‐methyl‐2‐oxazoline)‐b‐poly(dimethyl siloxane) (PMeOx–PDMS) block copolymer was developed. First of all, PMeOx–PDMS macromonomer was synthesized by coupling mono‐hydroxylated PMeOx with PDMS followed by end‐capping with methacrylate group. The structures of each step were characterized by NMR and titration. After that, silicone hydrogels were prepared by UV‐initiated copolymerization of PMeOx–PDMS macromonomer with monomers such as 2‐hydroxyethyl methacrylate in the presence of a crosslinker. Measurements of the hydrogels' water contact angle, equilibrium water content, and tensile properties showed that the hydrogels possessed better hydrophilic surface, higher water content, and better ion permeability with the increase of the content of the macromonomer PMeOx–PDMS. Meanwhile, the tensile strength and Young's modulus of the hydrogels decreased slightly. Protein adsorption tests showed that the hydrogels had strong antifouling ability after the incorporation of PMeOx. This newly described hydrogel demonstrated attractive properties to serve as ophthalmic biomaterial. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39867.     

Preparation and property of starch nanoparticles reinforced aldehyde–hydrazide covalently crosslinked PNIPAM hydrogels

Injectable, de‐crosslinkable, and thermosensitive hydrogels are obtained by hydrazide‐functionalized poly(N‐isopropylacrylamide) and aldehyde‐functionalized dextrin through in situ crosslinked method. Natural based and degradable starch nanoparticles (SNPs) are used as fillers in order to improve mechanical property of hydrogels. Internal morphology, dynamic modulus, thermosensitivity property, de‐crosslinking performance, drug release, and in vitro cytotoxicity of hydrogels are investigated. Results show that SNPs disperse well throughout hydrogel and have no significant influence on gelation time and de‐crosslinking performance. Elasticity property of composite hydrogel prepared from 9.0 wt % precursors with 1.5 wt % fillers is improved significantly by SNPs and maximum storage modulus reaches 399.2 kPa, but 89.6 kPa of unreinforced hydrogels. Hydrogels exhibit good thermosensitive performance at alternating cyclic temperature of 25 and 37 °C. Doxorubicin hydrochloride‐loaded hydrogels can release more than 25 days. No significant cytotoxicity to L929 fibroblast cells is observed through a CCK‐8 assay for hydrogels, precursors, and SNPs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45761.     

Robust hydrogel of regenerated cellulose by chemical crosslinking coupled with polyacrylamide network

Regenerated cellulose/polyacrylamide (RC/PAAm) double network (DN) hydrogels are composed of cellulose crosslinked by epichlorohydrin (ECH) and chemical-crosslinked PAAm. The prepared RC/PAAm DN hydrogels present enhanced strength, good shape recovery property, excellent energy dissipation properties, decreased equilibrium water content, and low equilibrium swelling ratio (SR). The compressive strength and modulus of RC/PAAm hydrogel are about 4.3 and 11.5 times compared to that of RC hydrogel, respectively. Intriguingly, the chemical crosslinking between ECH and cellulose chains could increase the distance between cellulose chains. Consequently, the increasing molar ratio of ECH to glucose leads to larger SRs and decreased mechanical strength of the hydrogels. Additionally, higher PAAm contents lead to more densely crosslinked networks, and thus decreasing the SRs and improving the mechanical strength of the hydrogels. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47811.     

Polymer-Impregnated mortars I. Effect of polymer state on mechanical behavior

Mortar specimens were impregnated with methyl methacrylate, n-butyl acrylate, styrene, and crosslinking agents in various combinations. After polymerization of the monomers in situ, studies of mechanical properties such as Young's modulus and compressive strength were made. In one experiment, various ccpolymers of methyl methacrylate and n-butyl acrylate were prepared and tested as a function of temperature. Excellent reinforcement was obtained with any combination of monomers as long as the resulting polymer was at a temperature below its glass transition temperature. This suggests that the modulus of the reinforcing polymer is crucial, glassy behavior being required. The addition of crosslinking agents such as TMPTMA increased the high temperature strength, however.     

Preparation and characterization of polyacrylic acid‐poly(vinyl alcohol)‐based interpenetrating hydrogels

Some structural features of hydrogels from poly(acrylic acid) (PAAc) of various crosslinking degrees have been investigated through mechanical and swelling measurements. Interpenetrating polymer hydrogels (IPHs) of poly(vinyl alcohol) (PVA) and PAAc have been prepared by a sequential method: crosslinked PAAc chains were formed in aqueous solution by crosslinking copolymerization of acrylic acid and N,N‐methylenebisacrylamide in the presence of PVA. The application of freeze–thaw (F–T) cycles leads to the formation of a PVA hydrogel within the synthesized PAAc hydrogel. The swelling and viscoelastic properties of the IPHs were evaluated as a function of the content of crosslinker and the application of one F–T cycle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5789–5794, 2006     

Network characterization and swelling behavior of chemical hydrogels based on acid‐containing poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was modified with phthalic and succinic anhydrides to give vinyl alcohol–vinyl ester copolymers that contain carboxylate groups. These half‐esters were then crosslinked by using the poly‐ (ethylene glycol) (PEG) 400 diglycidylether. Low crosslinker/carboxylate ratios were used to obtain low degrees of crosslinking, so the capacity of the resulting hydrogel to absorb water was high. Water absorption was determined gravimetrically as a function of time at room temperature. The equilibrium swelling ratio and compressive modulus were characterized for all the resulting PVA hydrogels and related to the network structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3026–3031, 2003     

Preparation of collagen‐immobilized poly(ethylene glycol)/poly(2‐hydroxyethyl methacrylate) interpenetrating network hydrogels for potential application of artificial cornea

To enhance the mechanical strength of poly(ethylene glycol)(PEG) gels and to provide functional groups for surface modification, we prepared interpenetrating (IPN) hydrogels by incorporating poly(2‐hydroxyethyl methacrylate)(PHEMA) inside PEG hydrogels. Formation of IPN hydrogels was confirmed by measuring the weight percent gain of the hydrogels after incorporation of PHEMA, as well as by ATR/FTIR analysis. Synthesis of IPN hydrogels with a high PHEMA content resulted in optically transparent and extensively crosslinked hydrogels with a lower water content and a 6 ～ 8‐fold improvement in mechanical properties than PEG hydrogels. Incorporation of less than 90 wt % PHEMA resulted in opaque hydrogels due to phase separation between water and PHEMA. To overcome the poor cell adhesion properties of the IPN hydrogels, collagen was covalently grafted to the surface of IPN hydrogels via carbamate linkages to hydroxyl groups in PHEMA. Resultant IPN hydrogels were proven to be noncytotoxic and cell adhesion study revealed that collagen immobilization resulted in a significant improvement of cell adhesion and spreading on the IPN hydrogel surfaces. The resultant IPN hydrogels were noncytotoxic, and a cell adhesion study revealed that collagen immobilization improved cell adhesion and spreading on the IPN hydrogel surfaces significantly. These results indicate that PEG/PHEMA IPN hydrogels are highly promising biomaterials that can be used in artificial corneas and a variety of other load‐bearing tissue engineering applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011