Electrospun antibacterial nylon nanofibers through in situ synthesis of nanosilver: preparation and characteristics

A new method for production of nylon nanofibers with antibacterial properties containing silver nanoparticles (nylon nanofibers/Ag NPs) is introduced via in situ synthesis of nano-silver by reduction of silver nitrate in the polymer solution prior to electrospinning. The properties of the electrospinning solutions and the structures of the electrospun fibers were studied using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), UV?Cvis spectrophotometer and reflection spectrophotometer. Further, the antibacterial properties of the nanofibers were investigated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria. Interestingly, an antibacterial properties has been found on nylon 6 nanofibers while the nylon nanofibers/Ag NPs showed excellent antibacterial activities against both tested bacteria. The produced nylon nanofibers/Ag NPs can be a good candidate for biomedical applications, water and air filtration.     

Antibacterial activities of novel nanocomposite biofilms of chitosan/phosphoramide/Ag NPs

Novel nanocomposite films of chitosan/phosphoramide/Ag NPs were prepared containing 1–5% of silver nanoparticles. The Ag NPs were synthesized according to the citrate reduction method. The XRD and SEM analysis of Ag NPs, chitosan (CS), phosphoramide (Ph), CS/Ph, CS/Ag NPs films and the nanocomposite films 1–5 containing CS/Ph/1–5% Ag NPs were investigated. The in vitro antibacterial activities were evaluated against four bacteria including two Gram‐positive Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and two Gram‐negative Escherchia coli (E. coli), Pseudomonas aeruginosa (P. aeruginosa) bacteria. Results revealed greater antibacterial effects of the films against Gram‐positive bacteria. Also, nanocomposite films containing higher percent of Ag NPs showed more antibacterial activities. POLYM. COMPOS. 36:454–466, 2015. © 2014 Society of Plastics Engineers     

Enhanced the dispersibility and permeability of silver nanoparticles over rGO grafted by positively-charged polyethyleneimine toward broad-spectrum sterilization

Silver nanoparticles (Ag NPs) are used as antimicrobial agents due to their high-efficiency, broad-spectrum disinfection activity. However, the agglomeration and stability problems caused by excessive release of silver ions (Ag⁺) have severely restricted their developments. Herein, a novel silver/polyethyleneimine/reduced graphene oxide (Ag/PEI/rGO) antibacterial material featuring good dispersibility and permeability was rationally designed, thus benefiting for the capture of bacteria due to the introducing of highly-cationic PEI modifier and controllable release of biocidal agents (Ag⁺). Compared with Ag/rGO, the Ag/PEI/rGO has excellent stability and shows a more efficient sterilization efficacy against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) with 100% germicidal efficiency with low orders of dozens of ppm. In addition, the outstanding biocompatibility of this Ag/PEI/rGO antibacterial material endows it with promising potential in sterilization applications, which is expected to solve the infection problem caused by bacterial biofilm formation.     

Silver-filled polyethersulfone membranes for antibacterial applications — Effect of PVP and TAP addition on silver dispersion

Silver-filled asymmetric polyethersulfone (PES) membranes were prepared by a simple phase inversion technique. The effects of polyvinylpyrrolidone (PVP) and 2, 4, 6-triaminopyrimidine (TAP) on the surface properties of the silver-filled asymmetric membrane were investigated for antibacterial application. The dispersion of silver nanoparticles (Ag) and silver content on membrane surface were characterized using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDS), respectively. Results showed that smaller silver particles were formed in PES membranes when PVP and TAP were added during dope preparation. Using inductively coupled plasma mass spectrometry (ICP-MS), it is found that silver leaching has been significantly reduced up to 57% and 63% upon the addition of PVP and TAP respectively. The improved silver dispersion on membrane surfaces was able to enhance the antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as evidenced by larger inhibition ring in agar diffusion method. The filtration of E. coli suspension (optical density = 0.31 at λ = 600 nm) carried out on prepared membranes proved that PES-AgNO₃ with TAP as dispersant appeared to inhibit almost 100% bacterial growth in rich medium. Hence, overall results showed the potential of PES-AgNO₃ with TAP to be used for antibacterial applications especially in water treatment.     

Synergistic antimicrobial effects of polyaniline combined with silver nanoparticles

Silver/polyaniline nanocomposites (Ag NPs/PANI) containing PANI nanofiber and Ag nanoparticles were synthesized by one-step approach without using any extra reducing agent or surfactant and applied to new antimicrobial agents. Morphologies and crystallinity of the nanocomposites were characterized with SEM and XRD. The results showed that the average diameter of the PANI nanofibers is around 50–150 nm, and the average particle size of Ag NPs is around 100 nm. The crystallinity of PANI gets better with increasing silver nitride concentration. UV–vis absorption spectroscopy analysis indicated that the Ag NPs have some effect on the microstructure of PANI. The antimicrobial properties of Ag NPs/PANI against Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus and fungous Yeast were evaluated using viable cell counts. The test results demonstrated that Ag NPs/PANI have enhanced antimicrobial efficacy compared to that of pure Ag NPs or pure PANI under the same test condition. The mechanism of the synergistic antimicrobial effect of Ag NPs with PANI was also proposed. In addition, thermal gravity analysis indicated that pure PANI and Ag NPs/PANI exhibit better thermal stability. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Antibacterial properties of raw and degummed silk with nanosilver in various conditions

This article is concerned with the effects of nanosized silver colloids on the antibacterial properties of silk fibers against two kinds of bacteria: Staphylococcus aureus and Escherichia coli. Different concentrations of silver nanoparticles (Ag NPs; 10, 25, 50, and 100 ppm) were applied to silk fibers by an exhaust method. The effect of medium pH on the Ag NP uptake on the fibers was studied. Also, sodium carbonate and sodium chloride were added to the liquor as auxiliaries. Scanning electron microscopy was used to observe the morphology of the silk fibers. The antibacterial activity was examined by a bacterial counting method. Energy‐dispersive X‐ray spectroscopy was also used to show the elements on the surface of the silk fibers. We observed that the antibacterial activity increased with silver treatment. It also increased with decreasing pH, especially for the raw silk. The use of NaCl improved the uniformity of the Ag NPs on the fiber surface and increased the antibacterial activities. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Enhanced mechanical properties and bactericidal activity of polypropylene nanocomposite with dual‐function silica–silver core‐shell nanoparticles

Dual‐function silica–silver core‐shell (SiO₂@Ag) nanoparticles (NPs) with the core diameter of 17 ± 2 nm and the shell thickness of about 1.5 nm were produced using a green chemistry. The SiO₂@Ag NPs were tested in vitro against gram‐positive Staphylococcus aureus (S. aureus) and gram‐negative Escherichia coli (E. coli), both of which are human pathogens. Minimal inhibitory concentrations of the SiO₂@Ag NPs based on Ag content are 4 and 10 μg mL^?1 against S. aureus and E. coli, respectively. These values are similar to those of Ag NPs. SiO₂@Ag NPs were for the first time incorporated to a commodity polypropylene (PP) polymer. This yielded an advanced multifunctional polymer using current compounding technologies i.e., melt blending by twin‐screw extruder and solvent (toluene) blending. The composite containing 5 wt % SiO₂@Ag NPs (0.05 wt % Ag) exhibited efficient bactericidal activity with over 99.99% reduction in bacterial cell viability and significantly improved the flexural modulus of the PP. Anodic stripping voltammetry, used to investigate the antibacterial mechanism of the composite, indicated that a bactericidal Ag⁺ agent was released from the composite in an aqueous environment. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and antibacterial effects of PVA‐PVP hydrogels containing silver nanoparticles

The poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone) (PVA–PVP) hydrogels containing silver nanoparticles were prepared by repeated freezing–thawing treatment. The silver content in the solid composition was in the range of 0.1–1.0 wt %, the silver particle size was from 20 to 100 nm, and the weight ratio of PVA to PVP was 70 : 30. The influence of silver nanoparticles on the properties of PVA–PVP matrix was investigated by differential scanning calorimeter, infrared spectroscopy and UV–vis spectroscopy, using PVA–PVP films containing silver particles as a model. The morphology of freeze‐dried PVA–PVP hydrogel matrix and dispersion of the silver nanoparticles in the matrix was examined by scanning electron microscopy. It was found that a three‐dimensional structure was formed during the process of freezing–thawing treatment and no serious aggregation of the silver nanoparticles occurred. Water absorption properties, release of silver ions from the hydrogels and the antibacterial effects of the hydrogels against Escherichia coli and Staphylococcus aureus were examined too. It was proved that the nanosilver‐containing hydrogels had an excellent antibacterial ability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 125–133, 2007     

Fabrication of antibacterial silver nanoparticle‐modified chitosan fibers using Eucalyptus extract as a reducing agent

Green chemical method could be a promising route to achieve large scale synthesis of nanostructures for biomedical applications. Here, we describe a green chemical synthesis of silver nanoparticles (Ag NPs) on chitosan‐based electrospun nanofibers using Eucalyptus leaf extract. A series of silver salt (AgNO₃) amounts were added to a certain composition of chitosan/polyethylene oxide aqueous acetic acid solution. The solutions were then electrospun to obtain nanofibrous mats and then, morphology and size of nanofibers were analyzed by scanning electron microscopy (SEM). Incubation of AgNO₃‐containing mats into Eucalyptus leaf extract led to the formation of Ag NP clusters with average diameter of 91 ± 24 nm, depicted by SEM and transmission electron microscopy. Surface enhanced Raman spectroscopy also confirmed formation of Ag NPs on the nanofibers. The mats also showed antimicrobial activity against Escherichia coli and Staphylococcus aureus bacteria with bigger inhibition zone for extract‐exposed mats against S. aureus. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42133.     

The influence of coating with aminopropyl triethoxysilane and CuO/Cu2O nanoparticles on antimicrobial activity of cotton fabrics under dark conditions

A novel impregnation process for the fabrication of cotton nanocomposite with strong antimicrobial activity against antibiotics-resistant bacteria and yeast was developed. The impregnation process includes the sol–gel treatment of fabric with (3-aminopropyl)triethoxysilane in the first step, and synthesis of the CuO/Cu₂O nanoparticles (NPs) on the fabric surface in the second step. The in situ synthesis of the CuO/Cu₂O NPs was based on the adsorption of Cu²⁺-ions by the introduced amino groups of the sol–gel coating. The adsorbed Cu²⁺-ions are subsequently reduced in the alkaline solution of NaBH₄. X-ray diffraction measurements confirmed the formation of CuO/Cu₂O NPs. Scanning electron microscopy and atomic absorption spectrometry analyses indicate that the particle size, agglomeration, and amounts of synthesized NPs were highly affected by the initial concentration of CuSO₄ solution. The toxicity of nanocomposites to human keratinocytes (HaCaT) and antimicrobial activity against Gram-negative Escherichia coli ATCC 25922, E. coli ATCC BAA 2469, and Klebsiella pneumoniae ATCC BAA 2146, and Gram-positive bacteria Staphylococcus aureus ATCC 25923, S. aureus ATCC 43300 and yeast Candida albicans ATCC 24433 strongly depended on the copper content. In addition to excellent antimicrobial activity, controlled release of Cu²⁺-ions from the fabrics into physiological saline solution was obtained.     

Synthesis and Antimicrobial Evaluation of Bis-morpholine Triazine Quaternary Ammonium Salts

Efficient, environmentally and economically sustainable, and nontoxic antibacterial products are of global relevance in the fight against microorganism contamination. In this work, an easy and straightforward method for the synthesis of bis-morpholino triazine quaternary ammonium salts (bis-mTQAS) is reported, starting from 2,4,6-trichloro-1,3,5-triazine or 2,4-dichloro-6-methoxy-1,3,5-triazine and various N-alkylmorpholines. Bis-mTQAS were tested as antimicrobials against Gram-negative and Gram-positive bacterial strains. The best-performing bis-mTQAS were found to achieve total disinfection against Staphylococcus aureus ATCC 25923 and Escherichia coli ATCC 25922 at 50 and 400 μg/mL, respectively. Distinctively, bis-mTQAS with the highest antimicrobial efficiency had lowest cytotoxicity.     

Silver‐loaded lyocell fibers modified by tempo‐mediated oxidation

The purpose of this research was to accomplish antimicrobial properties in lyocell fibers by Ag⁺ ions sorption from aqueous silver nitrate solution. Sorption properties of lyocell fibers were improved by the selective TEMPO‐mediated oxidation, i.e. oxidation with sodium hypochlorite and catalytic amount of sodium bromide and 2,2,6,6‐tetramethylpiperidine‐1‐oxy radical (TEMPO). The most suitable experimental conditions for the selective TEMPO‐mediated oxidation were determined by changing oxidation conditions: concentration of sodium hypochlorite, as well as duration of sorption. The obtained results showed that the maximum sorption capacity (0.809 mmol of Ag⁺ ions per gram of fibers) of modified lyocell fibers was obtained for the sample modified with 4.84 mmol NaClO per gram of cellulose, during 1 h. The antifungal activity of the TEMPO‐oxidized lyocell fibers with silver ions against fungi from the Candida family, Candida albicans (ATCC 24433), and antibacterial activity against two strains: Staphylococcus aureus (ATCC 25923) and Escherichia coli (ATCC 25922) were confirmed in vitro. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of antimicrobial silver nanoparticles on silk fibers via γ‐radiation

Antimicrobial silver nanoparticles (NPs) were successfully synthesized on the surface of silk fibers via γ‐ray irradiation. The products were characterized with scanning electron microscope (SEM), energy dispersion spectrum, and X‐ray diffraction. The results revealed that the silver particles with a diameter of less than 20 nm were immobilized and well dispersed on the surface of silk fibers. The antimicrobial capability against the gram positive bacterium Staphylococcus aureus and the washing stability of the silk fibers produced with different conditions were tested and found to be excellent. The silk fibers treated with 1 mM solution and 10 kGy γ‐radiation showed 96% antimicrobial activity and still kept above 85% antibacterial activity after 10 washing cycles. Moreover, a mechanism for the formation of silver NPs on silk fibers under γ‐radiation was generally discussed. The resulting silk fibers coated with silver NPs can be useful as functional fabrics in a range of applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Antibacterial polycaprolactone electrospun fiber mats prepared by soluble eggshell membrane protein–assisted adsorption of silver nanoparticles

Antibacterial polycaprolactone (PCL) electrospun fiber mats were prepared by coelectrospinning PCL with soluble eggshell membrane protein (SEP) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP), followed by adsorption of silver nanoparticles (Ag NPs) through hydrogen‐bonding interaction between the amide groups of SEP and the carboxylic acid groups capped on the surfaces of Ag NPs. The PCL/SEP fiber mat was characterized by X‐ray photoelectron spectroscopy, indicating the presence of some SEP on the fiber surface. The adsorption of Ag NPs was confirmed by transmission electron microscopy and quantitatively characterized by thermogravimetric analysis. The pH value of the silver sol used for adsorption is very important in view of the amount and dispersion state of Ag NPs adsorbed on the fibers. The Ag NP–decorated PCL/SEP fiber mats prepared at pH 3–5 exhibit strong antibacterial activity against both gram‐negative Escherichia coli and gram‐positive Bacillus subtilis. Antibacterial PCL fiber mats were also obtained similarly with the assistance of collagen (another protein) instead of SEP, showing that protein‐assisted adsorption of Ag NPs is a versatile method to prepare antibacterial electrospun fiber mats. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43850.     

Highly antibacterial and toughened polystyrene composites with silver nanoparticles modified tetrapod‐like zinc oxide whiskers

In this work, high‐performance multifunctional composites were obtained by melt blending silver deposited tetrapod‐like zinc oxide whiskers (Ag‐ZnOw) with polystyrene (PS). The chemical, spectroscopic, antibacterial, mechanical, and morphological properties of the PS/Ag‐ZnOw composites were carefully investigated and discussed. The obtained PS/Ag‐ZnOw composites characterized remarkable antibacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Moreover, it is found that impact strength of the composite increase with increasing nanofiller concentration (up to 0.25 wt %). Morphological characterization of the impact fractured surface of composites revealed that toughening was achieved through uniform filler distribution in the polymer matrix, and anchoring effect was imparted by the tetrapod‐like shape of ZnO whiskers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40900.     

Characterization and antibacterial properties of aminophenol grafted and Ag NPs decorated graphene nanocomposites

A new route for the synthesis of aminophenol grafted and Ag NPs decorated reduced graphene sheet (Ag-RGS) was developed as an effective antibacterial nanostructure. The nucleophilic substitution reaction of amine group of aminophenol with epoxy group of GO in the presence of silver nitrate and subsequent reduction with hydrazine generated Ag-RGS nanocomposite. The morphology and structure of the as-synthesized nanocomposite was characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. TEM images of Ag-RGS revealed that the silver nanoparticles were decorated on the surface of the graphene sheet. The presence of phenolic groups and silver nanoparticles on the surface of Ag-RGS showed synergistic effect on antibacterial activity against Escherichia coli and Staphylococcus aureus. This feature of the Ag-RGS nanocomposite showed that it can be a promising candidate in broad range of antibiotics.     

Modification of narrow‐spectrum peptidomimetic polyurethanes with fatty acid chains confers broad‐spectrum antibacterial activity

Each year, thousands of patients die from antimicrobial‐resistant bacterial infections that fail to respond to conventional antibiotic treatment. Antimicrobial polymers are a promising new method of combating antibiotic‐resistant bacterial infections. We have previously reported the synthesis of a series of narrow‐spectrum peptidomimetic antimicrobial polyurethanes that are effective against Gram‐negative bacteria, such as Escherichia coli; however, these polymers are not effective against Gram‐positive bacteria, such as Staphylococcus aureus. With the aim of understanding the correlation between chemical structure and antibacterial activity, we have subsequently developed three structural variants of these antimicrobial polyurethanes using post‐polymerization modification with decanoic acid and oleic acid. Our results show that such modifications converted the narrow‐spectrum antibacterial activity of these polymers into broad‐spectrum activity against Gram‐positive species such as S. aureus, however, also increasing their toxicity to mammalian cells. Mechanistic studies of bacterial membrane disruption illustrate the differences in antibacterial action between the various polymers. The results demonstrate the challenge of balancing antimicrobial activity and mammalian cell compatibility in the design of antimicrobial polymer compositions. © 2019 Society of Chemical Industry     

Adsorption and antibacterial activity of silver‐dispersed carbon aerogels

Silver‐dispersed carbon aerogels (Ag/CAs) were obtained by the direct immersion of organic aerogels in aqueous AgNO₃ solutions and then carbonization of the resulting material under a nitrogen atmosphere. The adsorption and antibacterial activity of Escherichia coli and Staphylococcus aureus on Ag/CAs were studied by the measurement of the amount of viable bacteria in suspensions and scanning electron microscopy (SEM) observations. The adsorbed amount of bacteria on samples without silver increased with an increase in the carbonization temperature and contact time. SEM studies showed that the adsorption capacity of Ag/CAs decreased with an increase in the silver content; this was considered to be mainly due to the dissolution behavior of bacteria by silver ions. The antibacterial test showed that 2.5 mg of Ag/CAs with more than 3.6% Ag could inhibit the growth of 10⁵ cfu/mL E. coli in 10 mL of a Mueller–Hinton broth culture, but in the case of S. aureus, 10‐mg samples just got the same antibacterial effect. An antibacterial persistency test showed that 25 mg of Ag/CAs with 6.5% Ag could kill 50 mL of 10⁵ cfu/mL E. coli eight times. These results indicate that Ag/CAs possess strong and long‐term antibacterial activity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1030–1037, 2006     

Efficiency of silver‐based antibacterial additives and its influence in thermoplastic elastomers

Styrene‐butylene/ethylene‐styrene‐based thermoplastic elastomers (TPE) are polymers with soft touch properties that are widely used for manufacturing devices that involve hand contact. However, when contaminated with microorganisms these products can contribute to spreading diseases. The incorporation of antibacterial additives can help maintain low bacteria counts. This work evaluated the antibacterial action of TPE loaded with silver ions and silver nanoparticles. The additives nanosilver on fumed silica (NpAg_silica), silver phosphate glass (Ag⁺_phosphate), and bentonite organomodified with silver (Ag⁺_bentonite) were added to the TPE formulation. The compounds were evaluated for tensile and thermal properties and antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). All the additives eliminated over 90% of E. coli, but only NpAg_silica killed more than 80% of S. aureus population. The better effect of NpAg_silica was attributed to the additive's high specific surface area, which promoted greater contact with bacteria cells. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43956.     

Facile preparation and good performance of nano-Ag/metallocene polyethylene antibacterial coatings

Metallocene polyethylene/nano-silver coatings were prepared by a facile air-spray method on polymer films. Different from the prevailing strategy to endow polyethylene with antibacterial performance, we used metallocene polyethylene sol and nano-silver as a precursor to deposit coatings on polymers at a relatively low operating temperature. Antibacterial coatings with excellent mechanical properties, water resistance, and low silver release were achieved. The composite coatings were examined in terms of surface characteristics, mechanical properties, and antibacterial activity against two representative bacterial strains including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The composite coatings exhibited favorable microstructure, good mechanical properties, and suitable crystallinity. The antimicrobial tests indicated that the fabricated composite coatings showed promising antibacterial activity against E. coli and S. aureus. Furthermore, Ag ions released by the composite coating after 30 days were under 1.2 ppb. These results indicated a promising prospect of the composite coating for wide antibacterial applications.