Ionic polymers with expanded π‐conjugation systems derived from through‐space interaction in piperazinium and homopiperazinium rings

Reactions of N‐(2,4‐dinitrophenyl)‐4‐arylpyridinium chlorides (aryl (Ar) = phenyl and 4‐biphenyl) with piperazine or homopiperazine caused opening of the pyridinium ring and yielded polymers that consisted of 5‐piperazinium‐3‐arylpenta‐2,4‐dienylideneammonium chloride (? N(CH₂CH₂)₂N⁺ (Cl^?)?CH? CH?C(Ar)? CH?CH? ) or 5‐homopiperazinium‐3‐arylpenta‐2,4‐dienylideneammonium chloride (? N(CH₂CH₂CH₂)(CH₂CH₂)N⁺ (Cl^?)?CH? CH?C(Ar)? CH?CH? ) units. ¹H NMR spectral analysis suggested that the π‐electrons of the penta‐2,4‐dienylideneammonium group of the polymers were delocalized. UV‐visible spectral measurements revealed that the π‐conjugation system expanded along the polymer chains because of the orbital interaction between electrons of the two nitrogen atoms of the piperazinium and homopiperazinium rings. However, the π‐conjugation length depended on the distance between the two nitrogen atoms; that is, the polymers containing the piperazinium ring had a longer π‐conjugation length than those containing the homopiperazinium ring. Conversion of the piperazinium and homopiperazinium rings from the boat to the chair form led to a decrease in the π‐conjugation length. The surface of pellets that were molded from the polymers exhibited metallic luster, and these polymers underwent electrochemical oxidation in solution. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of 2‐oxazoline‐benzoxazine compound and its polymer

A novel 2‐oxazoline‐benzoxazine (POB) was synthesized with 2‐(hydroxylphenyl)‐2‐oxazoline, 1,3,5‐triphenylhexahydro‐1,3,5‐triazine and paraformaldehyde. The chemical structure of the monomer was confirmed by FTIR, ¹H‐NMR, ¹³C‐NMR, and MS. The curing behavior of the monomer was studied by DSC and FTIR, and the ring opening reaction of the monomer was found to occur from 187.5°C. The results of DMA and TGA demonstrated that the thermal properties of polymer for POB monomer (P‐m) are better than polymer for POB precursor (P‐p), because that the oligomer in benzoxazine precursor decreased the perfection of the polymer's network structure; it was also found that the thermal properties of P‐m and P‐p are much better than the common polybenzoxazine and the composite material of benzoxazine and 2‐oxazoline. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci , 2008.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Swelling and drug release profile of poly(2‐ethyl‐2‐oxazoline)‐based hydrogels prepared by gamma radiation‐induced copolymerization

Poly(2‐ethyl‐2‐oxazoline) and acrylic acid were copolymerized in different compositions using γ‐rays‐induced polymerization and cross‐linking to obtain a series of pH‐sensitive hydrogels. The preparation parameters that may affect the copolymerization process such as the feed solution composition and irradiation dose were optimized. Swelling characteristics of the obtained polymeric hydrogels were evaluated. The results show the significant effects of the hydrogel composition, soaking time, and pH on the swelling equilibrium. The diffusion parameters obtained at pH 1 and 7 show the possibility of using the prepared hydrogels in the field of colon‐specific drug delivery systems. Ibuprofen as a model drug was loaded into (poly(2‐ethyl‐2‐oxazoline)/acrylic acid) copolymer hydrogel to investigate their drug release behavior at different pH values. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of hydrosoluble polymers of oxazoline using Maghnite‐H as catalyst

2,4,4‐Triméthyl‐2‐oxazoline was polymerized, using an acid exchanged montmorillonite clay as catalyst, with the aim to study the influence of the methyl group size in the initiation and propagation processes. The effect of amount of catalyst temperature, time, and solvent on the polymerization yield and viscosity of the polymers were studied. The polymers obtained were characterized by spectrometric methods and their average molecular weights were determined by viscosimetrie and GPC data. The polymers presented similar spectrometric results and narrow molecular weight distributions. The kinetics indicated that the polymerization rate is first order with respect to monomer concentration. The polymerization results showed that the methyl groups present in the monomer affected the initiation process. Mechanism studies showed that polymerization of TMOX involves nucleophilic ring opening by attack of nitrogen to cleave the CH₂? O bond of the oxazoline ring. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1792–1800, 2007     

Organometallic synthesis of n‐type π‐conjugated polymers with dopant cation trapping sites and stability of n‐doping state against air

n‐Type π‐conjugated polymers comprising a 1,2,4‐triazole ring substituted by a benzo‐15‐crown 5‐ether (benzo15C5) subunit at the 4‐position of the 1,2,4‐triazole ring and n‐type aromatic rings such as pyridine‐2,5‐diyl and 2,1,3‐benzothiadiazole‐4,7‐diyl rings were synthesized by organometallic polycondensation. The UV‐visible spectra of the polymers exhibited absorption maxima (λ_max values) at a longer wavelength than that exhibited by 3,5‐bis(2‐bromopyridyl)‐4‐benzo15C5‐1,2,4‐triazole, revealing that their π‐conjugation system was expanded along the polymer chain. The polymers with the benzo15C5 subunit underwent an electrochemical reduction (n‐doping), and the corresponding oxidation (n‐dedoping) occurred at an unusually high potential in an acetonitrile solution of NaClO₄; the factor responsible for the unusually high oxidation potential was the stabilized n‐doping state that was attributed to the inclusion of Na⁺ in the 15C5 ring. The polymers with the benzo15C5 subunit exhibited a considerably higher stability of the n‐doping state in air than did those without this subunit. Copyright © 2012 Society of Chemical Industry     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Unsaturated 2‐oxazoline end capping of liquid crystalline polyester by reactive processing and in a solution

End capping of liquid crystalline poly(ethylene terephthalate‐co‐oxybenzoate) with a bifunctional 2‐oxazoline derivative, 2‐(4‐allyloxyphenyl)‐2‐oxazoline, has been performed in melt under the condition of reactive processing and in a solution. The reaction in melt is very fast and, despite some modifier evaporation, it is completed in 2 min at 230°C. The product is a polyester containing unsaturated end groups bonded via esteramide linkage. The presence of unsaturation was proved by ¹³C‐NMR spectroscopy. An increase in temperature and prolongation of the processing time gives raise to thermal‐induced reactions on the unsaturated end groups, resulting in an increase of the glass transition temperature. Depending on the processing temperature decomposition, propagation and crosslinking occur in different extent and influence polymer properties. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1047–1053, 1999     

Molecular Basis for the Enantioselective Ring Opening of β‐Lactams Catalyzed by Candida antarctica Lipase B

Lipase B from Candida antarctica (CAL‐B) catalyzes the slow, but highly enantioselective (E>200), ring‐opening alcoholysis of two bicyclic and two 4‐aryl‐substituted β‐lactams. Surprisingly, the rate of the reaction varies with the nature of the alcohols and was fastest with either enantiomer of 2‐octanol. A 0.5‐g scale reaction with 2‐octanol as the nucleophile in diisopropyl ether at 60 °C yielded the unreacted β‐lactam in 39–46% yield (maximum yield is 50%) with ≥96% ee. The product β‐amino acid esters reacted further by polymerization (not isolated or characterized) or by hydrolysis due to small amounts of water in the reaction mixture yielding β‐amino acids (7–11% yield, ≥96% ee). The favored enantiomer of all four β‐lactams had similar 3‐D orientation of substituents, as did most previously reported β‐lactams and β‐lactones in similar ring‐opening reactions. Computer modeling of the ring opening of 4‐phenylazetidin‐2‐one suggests that the reaction proceeds via an unusual substrate‐assisted transition state, where the substrate alcohol bridges between the catalytic histidine and the nitrogen of the β‐lactam. Computer modeling also suggested that the molecular basis for the high enantioselectivity is a severe steric clash between Ile189 in CAL‐B and the phenyl substituent on the slow‐reacting enantiomer of the β‐lactam.     

pH‐ and temperature‐induced release of doxorubicin from multilayers of poly(2‐isopropyl‐2‐oxazoline) and tannic acid

We present a simple strategy to prepare doxorubicin (DOX) containing hydrogen‐bonded films of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) and tannic acid (TA) which release DOX in acidic conditions while releasing a minimal amount of DOX at physiological pH. Water soluble complexes of TA and DOX (TA ? DOX) were prepared prior to film construction. PIPOX and TA ? DOX were deposited at the surface at pH 6.5 using the layer‐by‐layer (LbL) technique. We found that multilayers released a minimal amount of DOX at physiological pH due to further ionization of TA with increasing pH and enhanced electrostatic interactions between TA and DOX. In contrast, pH‐induced release of DOX was observed in moderately acidic conditions due to protonation of TA as the acidity increased and electrostatic interactions between TA and DOX decreased. Moreover, we found that raising the temperature from 25 °C to 37.5 °C increased the amount of DOX released from the surface. This can be rationalized with the conformational changes within the multilayers correlated with the lower critical solution temperature behaviour of PIPOX and increased kinetic energy of DOX molecules. Considering the acidic nature of tumour tissues and important biological properties of PIPOX and TA, these multilayers are promising for pH‐ and temperature‐triggered release of DOX from surfaces. © 2017 Society of Chemical Industry     

Design,Synthesis, and Biological Evaluation of 3‐Benzazepin‐1‐ols as NR2B‐Selective NMDA Receptor Antagonists

Cleavage and reconstitution of a bond in the piperidine ring of ifenprodil ( 1 ) leads to 7‐methoxy‐2,3,4,5‐tetrahydro‐1H‐3‐benzazepin‐1‐ols, a novel class of NR2B‐selective NMDA receptor antagonists. The secondary amine 7‐methoxy‐2,3,4,5‐tetrahydro‐1H‐3‐benzazepin‐1‐ol ( 12 ), which was synthesized in six steps starting from 2‐phenylethylamine 3 , represents the central building block for the introduction of several N‐linked residues. A distance of four methylene units between the basic nitrogen atom and the phenyl residue in the side chain results in high NR2B affinity. The 4‐phenylbutyl derivative 13 (WMS‐1405, K_i=5.4 nM ) and the conformationally restricted 4‐phenylcyclohexyl derivative 31 (K_i=10 nM ) represent the most potent NR2B ligands of this series. Whereas 13 shows excellent selectivity, the 4‐phenylcyclohexyl derivative 31 also interacts with σ₁ (K_i=33 nM ) and σ₂ receptors (K_i=82 nM ). In the excitotoxicity assay the phenylbutyl derivative 13 inhibits the glutamate‐induced cytotoxicity with an IC₅₀ value of 360 nM , indicating that 13 is an NMDA antagonist.     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Morphology,thermal properties,hydrophobicity and O2/N2 gas separation performance of 4,4′‐oxydiphthalic anhydride‐based polyimide/titania hybrids

Two 4,4′‐oxydiphthalic anhydride (ODPA)‐based polyimide (PI)/titania hybrid films with different morphologies were prepared through an in situ sol‐gel process. The precursor, poly(amic acid) (PAA), was synthesized using ODPA, diamine of 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) or 4,4′‐diaminodiphenyl ether (ODA) and a suitable amount of dimethylformamide solvent. A mixture of tetraethylorthotitanate (Ti(OEt)₄) and acetylacetone with molar ratio of 1:4 was then added to the PAA solution and mixed thoroughly. Following curing, PI/titania hybrid membranes with different crosslinkages and Ti(OEt)₄ contents were prepared. PI hybrids with the longer BAPP diamine present different morphologies and property changes related to the Ti(OEt)₄ content from those of hybrids with the shorter ODA diamine. The morphologies of the two ODPA‐based PI/titania hybrids were studied with reference to the disruption of imide ring formation. Different crosslinked structures produced were identified using Fourier transform infrared analysis from the frequency shift of the C?O band and relative absorbance intensities of bands of C?O group and imide ring (? N?). Thermal properties, O₂/N₂ gas separation performance, contact angle, storage modulus, glass transition temperature and decomposition temperature of the PI hybrids were all found to be functions of the Ti(OEt)₄ content, crosslinked structure and PI type. Copyright © 2012 Society of Chemical Industry     

Axially Chiral Phosphine‐Oxazoline Ligands in Silver(I)‐ Catalyzed Asymmetric Mannich Reaction of Aldimines with Trimethylsiloxyfuran

A new asymmetric catalytic system for the Mannich reaction of aldimines with trimethylsiloxyfuran is described. The combination of an axially chiral phosphine‐oxazoline ligand (S)‐2‐[(R)‐2′‐(diphenylphosphino)‐1,1′‐binaphthyl‐2‐yl]‐4‐phenyl‐4,5‐dihydrooxazole with silver acetate and 2,2,2‐trifluoroacetic acid is a very effective catalytic system in the asymmetric Mannich reaction of various aldimines with trimethylsiloxyfuran in dichloromethane at −78 °C, affording the corresponding adducts in up to 99% yield, 99:1 (dr) and 99% ee (major diastereoisomer) under mild conditions.     

Ring‐opening polymerization of ε‐caprolactone by a new yttrium complex: Y[2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenoxy)]2(ethylene glycol dimethyl ether)Na(ethylene glycol dimethyl ether)3

The main aims of the work reported here were to synthesize and characterize a new 2,2′‐ethylidene‐bis(4,6‐di‐tert‐butylphenol) (EDBPH₂)‐based bimetal yttrium complex, Y(EDBP)₂(DME)Na(DME)₃ (1c; where DME is ethylene glycol dimethyl ether), which was employed as an efficient initiator for the ring‐opening polymerization of ε‐caprolactone (ε‐CL). From single‐crystal X‐ray diffraction, the solid structure of this new bimetal initiator was well established. Experimental results show that 1c initiates the ring‐opening polymerization of ε‐CL to afford poly(ε‐CL) with a narrow molecular weight distribution (M_w/M_n = 1.09–1.36, 65 °C). Based on an in situ NMR study, a plausible coordination–insertion mechanism is then proposed. The bimetal complex 1c can be used as an initiator for the ring‐opening polymerization of ε‐CL with some living characteristics. A study of the mechanism reveals that DME displacement in 1c by ε‐CL is involved in the initiation process and the propagation may proceed through three pathways by Na? O insertion or Y? O insertion. Copyright © 2009 Society of Chemical Industry     

Organosoluble and light‐colored fluorinated polyimides derived from 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy) phenyl]‐4,7‐methanohexahydroindan

A novel bis(ether amine) monomer, 5,5′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐4,7‐methanohexahydroindan ( 2 ), was synthesized through the nucleophilic aromatic substitution reaction of 5,5′‐bis‐(4‐hydroxyphenyl)‐4,7‐methanohexahydroindan with 2‐chloro‐5‐nitrobenzotrifluoride to yield the intermediate dinitro compound, followed by catalytic reduction with hydrazine and Pd/C. A series of polyimides were synthesized from 2 and various aromatic dianhydrides using a standard two‐stage process with chemical or thermal imidization of poly(amic acid). All of these polymer films were soluble in amide‐type solvents above 10% w/v, had tensile strengths of 97–117 MPa, and the 10% weight loss temperature was above 464 °C with their residues exceeding 46% at 800 °C in nitrogen. Compared with the non‐fluorinated polyimides, the fluorinated series were observed to have lower dielectric constants (2.92–3.28 at 1 MHz) and lower moisture absorptions (0.15–0.43 wt%) as well as lower color intensity and better solubility. Copyright © 2006 Society of Chemical Industry     

Gold(I)‐Catalyzed Cascade for Synthesis of Pyrrolo[1,2‐a:2′,1′‐c]‐/Pyrido[2,1‐c]pyrrolo[1,2‐a]quinoxalinones

An efficient and convenient method was developed for the one‐pot construction of the complex polycyclic heterocycles pyrrolo[1,2‐a:2′,1′‐c]‐/pyrido[2,1‐c]pyrrolo[1,2‐a]quinoxalinones from two simple starting materials via a gold(I)‐catalyzed domino reaction. This strategy presents an atom economical and environmentally friendly transformation, in which two new C N bonds and one new C C bond are formed in a one‐pot reaction process.     

New light emitting materials: Alternating copolymers with hole transport and emitting chromophores

A new type of novel high‐efficiency light‐emitting nitrogen‐containing poly(phenylene vinylene) (PPV)‐related copolymers, which have hole‐transfer moieties such as triphenylamine (TPA) and conjugated aromatic units such as 4,4′‐biphenylene, 1,4‐phenylene, 2,5‐dimethyl‐1,4‐phenylene, 1,4‐ or 1,5‐naphthylene, and 9,10‐anthrylene, was designed and synthesized by the well‐known Wittig–Hornor reaction. The resulting alternating copolymers were highly soluble in common organic solvents. They can spin‐cast onto various substrates to give highly transparent homogeneous thin films without heat treatment. The introduction of TPA units in the PPV backbone improved processibility and limited the π‐conjugation length. Furthermore, the additional π‐electron delocalization between the lone‐paired electron in the nitrogen atom and π‐electrons in the conjugated units contributed to the improvement of the fluorescence quantum yields of these copolymers. All these alternating copolymers except TPA–PAV have high‐efficiency photoluminescence and they are very promising for light‐emitting diodes (LEDs). It is very promising that TPA–PAV will emit white light when used in LED device due to the broad emission spectra. The origin of the broad spectrum is contributed by the charge‐transfer complex formation, which can be proved by the absorption and emission spectra of TPA–PAV solutions. When the aromatic units were 1,4‐phenylene, 1,4‐ or 1,5‐naphthylene, 4,4′‐biphenylene, and 9,10‐anthrylene, respectively, with increase of the capability to accept electrons in aromatic units, the charge transfer from TPA to aromatic units occurred; consequently, the fluorescence quantum yield decreased. The introduction of the alkoxy‐substitute group on the aromatic units in the polymer backbone caused the red shift of the absorption and emission spectra of the copolymers due to the stronger delocalization of the π‐conjugated system. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3351–3358, 1999     

Domino Reaction of Acyclic α,α‐Dialkenoylketene S,S‐Acetals and Diamines: Efficient Synthesis of Tetracyclic Thieno[2,3‐b]thiopyran‐Fused Imidazo[1,2‐a]pyridine/Pyrido[1,2‐a]pyrimidines

A series of unusual fused tetraheterocyclic compounds 3 , consisting of a thiopyran (ring A), a thiophene (ring B), a pyridine (ring C), and an imidazole or a pyrimidine (ring D) core, with a bridgehead nitrogen and an angular methyl group, were successfully synthesized by a catalyst‐free, one‐pot, two‐component domino reaction of 4‐(4‐methyl‐1,3‐dithiol‐2‐ylidene)‐1,7‐bis(aryl/heteroaryl)hepta‐1,6‐diene‐3,5‐dione 2 and diamines. In this reaction, up to five new bonds were formed accompanied by the C S bond cleavage of the 1,3‐dithiole ring of 2 , with water as the only by‐product.     

A General Method for the Enantioselective Hydrogenation of β‐Keto Esters using Monodentate Binaphthophosphepine Ligands

17 monodentate phosphepine ligands with a 4,5‐dihydro‐3H‐dinaphtho[2,1‐c;1′,2′‐e]phosphepine structural motif have been synthesized and tested in the asymmetric hydrogenation of various β‐keto esters. By variation of the substituents of the aryl group on the phosphorus atom a fine tuning of the selectivity of the catalytic system is possible. Quantitative yield and enantioselectivities up to 95% ee have been achieved for the hydrogenation of methyl acetoacetate ( 7a ), methyl 3‐oxovalerate ( 7b ) and ethyl 4‐phenyl‐3‐oxo‐propionate ( 7d ) using 4‐(4‐methoxyphenyl)‐4,5‐dihydro‐3H‐dinaphtho‐[2,1‐c;1′,2′‐e]phosphepine ( 4g ) as ligand. Best enantioselectivities were obtained at comparably high temperatures (100–120 °C), which had the advantage of increased reaction rates.