Preparation of poly(butylene succinate)‐poly[2‐(dimethylamino)ethyl methacrylate] copolymers and their applications as carriers for drug delivery

Copolymers of poly[2‐(dimethylamino)ethyl methacrylate]–poly(butylene succinate)–poly[2‐(dimethylamino)ethyl methacrylate] (PDMAEMA–PBS–PDMAEMA, PDBD) were synthesized through a chain‐extension reaction. The thermal properties characterized using differential scanning calorimetry showed that the introduction of PDMAEMA chains slightly decreased the melting temperature of PBS. The water contact angle of PDBD copolymer films with media of various pH decreased with a decrease of pH. This should be ascribed to the conformational transition of PDMAEMA blocks from a compact coil to an expanding shape in accordance with the variation of the pH of the surroundings. The results of dynamic light scattering and scanning electron microscopy revealed that PDBD copolymers could form spherical micelles with small particle size and narrow particle size distribution. Furthermore, drug loading (loading content, ca 10%; encapsulation efficiency, ca 60%) and release experiments were conducted using doxorubicin as a hydrophobic model drug. The results of release experiments of copolymer nanomicelles showed that these micelles had pH‐responsive properties. © 2018 Society of Chemical Industry     

Preparation of 2‐(dimethylamino) ethyl methacrylate copolymer micelles for shape memory materials

Researchers are actively developing shape memory polymers (SMPs) for smart biomaterials. This paper reports a new SMP system synthesized from biocompatible 2‐(dimethylamino) ethyl methacrylate (DMAEMA), butyl acrylate (BA) and tri(ethylene glycol) divinyl ether (TDE). Preliminary results show that the DMAEMA‐co‐BA‐co‐TDE copolymers form micelles in aqueous solution due to chemical crosslinking and hydrophobicity. The micelle size decreased with the increase in the BA content since the hydrophobicity of copolymers increases with the increase of BA content. The resulting polymer films contain–N(CH₃)₂ functional groups for further biomaterial applications. The thermal stability of DMAEMA‐co‐BA‐co‐TDE copolymers is determined by the DMAEMA structure and content. Moreover, the copolymers form micro‐phase‐separated structures containing a reversible amorphous soft phase, and the storage moduli decreases significantly around T_g. Therefore, good thermal‐induced shape memory effects are achieved in the DMAEMA‐co‐BA‐co‐TDE copolymers by adjusting the BA content. This work proposes a new strategy for designing smart biomaterials using a biocompatible monomer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42312.     

A novel approach for albumin determination in aqueous media by using temperature‐ and pH‐sensitive N‐isopropylacrylamide‐co‐N‐[3‐(dimethylamino)‐propyl]methacrylamide random copolymers

Random copolymers of N‐isopropylacrylamide (NIPA) and N‐[3‐(dimethylamino)propyl]methacrylamide (DMAPM) were synthesized by solution polymerization using azobisizobutyronitrile as the initiator in 1,4‐dioxane at 60°C. NIPA‐co‐DMAPM copolymer exhibited both temperature and pH sensitivity. Thermally reversible phase transitions were observed both in the acidic and the alkaline pH regions for copolymers produced with different DMAPM/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for copolymers produced with higher DMAPM feed concentrations. NIPA‐co‐DMAPM random copolymer was also sensitive to the albumin concentration. In the presence of albumin, thermally irreversible phase transitions were observed in slightly acidic and neutral media. However, reversible transitions were obtained in aqueous media containing albumin at basic pH. The phase‐transition temperature of NIPA‐co‐DMAPM copolymer significantly decreased with increasing albumin concentration at both acidic and alkaline pH values. This behavior was explained by albumin binding onto the copolymer chains by means of H‐bond formation between the dimethylamino groups of the copolymer and the carboxyl groups of albumin. For a certain range of albumin concentration, the phase‐transition temperature exhibited a linear decrease with increasing albumin concentration. By utilizing this behavior, a simple albumin assay was developed. The results indicated that NIPA‐co‐DMAPM copolymer could be utilized as a new reagent for the determination of albumin concentration in the aqueous medium. The proposed method was valid for the albumin concentration range of 0–4000 μg/mL. The protein concentrations commonly utilized in biotechnological studies fall in the range of the proposed method. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2060–2071, 2002; DOI 10.1002/app.10503     

Thermo‐ and pH‐sensitive hydrogels based on 2‐(2‐methoxyethoxy)ethyl methacrylate and methacrylic acid

Hydrogels based on commercially available 2‐(2‐methoxyethoxy)ethyl methacrylate (MEO₂MA), with methacrylic acid (MAA) as comonomer, are studied. The incorporation of an ionizable monomer, such as MAA, in a thermosensitive system leads to the formation of hydrogels able to respond to pH and temperature according to their monomeric composition. Thus, at low pH, the acid groups of MAA are protonated, and they do not contribute to increase the hydrophilic balance, and collapse of the hydrogels occurs around room temperature. For temperatures below that of collapse, the degree of swelling increases with increasing MEO₂MA content. In contrast, at neutral or basic pH, the ionization of the acid groups contributes to increase the hydrophilicity and the osmotic pressure, leading to polyelectrolyte behaviour. In this regime, the swelling capacity increases and the thermosensitivity decreases with increasing MAA content in the hydrogels. These properties make poly(MEO₂MA‐co‐MAA) hydrogels suitable candidates for use in oral controlled delivery of hydrophobic drugs. This possibility is explored using ibuprofen as a model drug, after a complete study of the swelling kinetics. Copyright © 2010 Society of Chemical Industry     

Thermosensitive Poly[(2‐(diethylamino)ethyl methacrylate)‐co‐(N,N‐dimethylacrylamide)] Cryogels Prepared by a Two‐Step Polymerization Method

Summary: Temperature‐sensitive P(DEAEMA‐co‐DMAAm) cryogels with five different DMAAm contents were synthesized via a two‐step polymerization method, the initial polymerization being conducted for various times at 22 °C, followed by polymerization at ?26 °C for 24 h. The influence of the first‐step time and the content of DMAAm on the swelling ratio and network parameters such as the polymer/solvent interaction parameter, the average molecular mass between crosslinks, and the mesh size of the cryogels were reported and discussed. The swelling studies indicated that the swelling increased in the following order: 22C45 > 22C30 > 22C15 > 22C0. The cryogels exhibited swelling/deswelling transitions (reentrant phenomena) in water depending on temperature. These properties were attributed to the macroporous and regularly arranged network of the cryogels. Scanning electron microscope graphs reveal that the macroporous network structure of the cryogels can be adjusted by applying a two‐step polymerization.

Chemical structure of the P(DEAEMA‐co‐DMAAm) cryogels.     

Synthesis of well‐defined comb‐like amphiphilic copolymers with protonizable units in the pendent chains: 2. Poly(2‐(dimethylamino)ethyl methacrylate) grafted poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) copolymers and their association behavior in aqueous solution

Narrow‐distribution, well‐defined comb‐like amphiphilic copolymers are reported in this work. The copolymers are composed of poly(methyl methacrylate‐co‐2‐hydroxyethyl methacrylate) (P(MMA‐co‐HEMA)) as the backbones and poly(2‐(dimethylamino)ethyl methacrylate) (PDMAEMA) as the grafted chains, with the copolymer backbones being synthesized via atom‐transfer radical polymerization (ATRP) and the grafted chains by oxyanionic polymerization. The copolymers were characterized by gel permeation chromatography (GPC), Fourier‐transform infrared (FT‐IR) spectroscopy and ¹H NMR spectroscopy. The aggregation behavior in aqueous solutions of the comb‐like amphiphilic copolymers was also investigated. ¹H NMR spectroscopic and surface tension measurements all indicated that the copolymers could form micelles in aqueous solutions and they possessed high surface activity. The results of dynamic light scattering (DLS) and scanning electron microscopy (SEM) investigations showed that the hydrodynamic diameters of the comb‐like amphiphilic copolymer aggregates increased with dilution. Because of the protonizable properties of the graft chains, the surface activity properties and micellar state can be easily modulated by variations in pH. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels

BACKGROUND: A considerable amount of research has been focused on smart hydrogels that can respond to external environmental stimuli, especially temperature and pH. In this study, fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels were prepared by free radical copolymerization in aqueous solution using poly(ethylene glycol) (PEG) as a pore‐forming agent. RESULTS: Swelling studies showed that the hydrogels produced had both temperature and pH sensitivity. The deswelling kinetics at high temperature demonstrated that the shrinking rates were influenced by the addition of the pore‐forming agent and the amount of acrylic acid in the initial total monomers. The deswelling curves in low‐buffer solutions had two stages. Pulsatile swelling studies indicated that the PEG‐modified hydrogels were superior to the normal ones. These different swelling properties were further confirmed by the results of scanning electron microscopy. CONCLUSION: Such fast responsive thermo‐ and pH‐sensitive hydrogels are expected to be useful in biomedical fields for stimuli‐responsive drug delivery systems. Copyright © 2008 Society of Chemical Industry     

Swelling characteristics of thermo‐ sensitive poly[(2‐diethylaminoethyl methacrylate)‐co‐(N,N‐dimethylacrylamide)] porous hydrogels

Temperature‐sensitive poly[(2‐diethylaminoethyl methacrylate)‐co‐(N,N‐dimethylacrylamide)] [P(DEAEMA‐co‐DMAAm)] hydrogels with five different DMAAm contents were synthesized with and without the addition of sodium carbonate as porosity generator. The synthesized hydrogels were characterized with dry gel density measurements, scanning electron microscopy observation and the determination of swelling ratio. The influence of the pore‐forming agent and content of DMAAm on swelling ratio and network parameters such as polymer–solvent interaction parameter (χ), average molecular mass between crosslinks (M?_c) and mesh size (ζ) of the cryogels are reported and discussed. The swelling and deswelling rates of the porous hydrogels are much faster than for the same type of hydrogels prepared via conventional methods. At a temperature below the volume phase transition temperature, the macroporous hydrogels also absorbed larger amounts water compared to that of conventional hydrogels and showed obviously higher equilibrated swelling ratios in aqueous medium. In particular, the unique macroporous structure provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to the external temperature changes during the deswelling and swelling processes. These properties are attributed to the macroporous and regularly arranged network of the porous hydrogels. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying porosity generation methods during the polymerization reaction. Copyright © 2007 Society of Chemical Industry     

Synthesis and characterization of poly[4‐(2‐thiazolylazo)phenyl methacrylate]‐co‐poly(methyl methacrylate)

A new methacrylic monomer, 4‐(2‐thiazolylazo)phenylmethacrylate (TPMA) was synthesized. Copolymerization of the monomer with methyl methacrylate (MMA) was carried out by free radical polymerization in THF solution at 70 ± 0.5°C, using azobisisobutyronitrile (AIBN) as an initiator. The monomer TPMA and the copolymer poly(TPMA‐co‐MMA) were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and elemental analysis methods. The polydispersity index of the copolymer was determined using gel permeation chromatography (GPC). Thermogravimetric analysis (TGA) of the copolymer performed in nitrogen revealed that the copolymer was stable to 270°C. The glass transition temperature (T_g) of the copolymer was higher than that of PMMA. The copolymer with a pendent aromatic heterocyclic group can be dissolved in common organic solvents and shows a good film‐forming ability. Both the monomer TPMA and the copolymer poly (TPMA‐co‐MMA) have bright colors: orange and yellow, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2152–2157, 2007     

A novel temperature and pH dual‐responsive hybrid hydrogel with polyhedral oligomeric silsesquioxane as crosslinker: synthesis,characterization and drug release properties

Octavinyl polyhedral oligomeric silsesquioxane (OVPS) is used as the crosslinker instead of N,N′‐methylenebisacrylamide (BIS) to copolymerize with 2‐(dimethylamino)ethyl methacrylate (DMAEMA) or DMAEMA and N‐isopropylacrylamide (NIPAM) to prepare hybrid hydrogels: P(OVPS‐co‐DMAEMA) and P(OVPS‐co‐DMAEMA‐co‐NIPAM). The prepared hydrogels are transparent and show dual response to temperature and pH. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical analysis and tensile tests. Their mechanical properties, swelling ratio, deswelling and reswelling behaviors as well as drug release properties were investigated. The results indicate that OVPS can be incorporated into polymer networks in proportion to feed ratios. The P(OVPS‐co‐DMAEMA) hydrogel exhibits more homogeneous interior structure, higher swelling ratio and faster response than the conventional hydrogel prepared with BIS. Moreover, the incorporation of OVPS enhances the compression and tensile properties of the hydrogels. The feed ratios of OVPS and NIPAM have a great effect on volume phase transition temperature, thermal sensitivity, swelling behavior, mechanical properties and drug release properties of the hybrid hydrogels. The prepared dual‐responsive OVPS‐containing hydrogels are expected to be used as biomedical materials in drug release and tissue engineering. © 2014 Society of Chemical Industry     

Phase behavior of temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) in dilute aqueous solution

Several different composition temperature‐ and pH‐sensitive poly(acrylic acid‐g‐N‐isopropylacrylamide) (P(AA‐g‐NIPAM)) graft copolymers were synthesized by free‐radical copolymerization utilizing macromonomer technique. The phase behavior and conformation change of P(AA‐g‐NIPAM) in aqueous solutions were investigated by UV–vis transmittance measurements, fluorescence probe, and fluorescence quenching techniques. The results demonstrate that the P(AA‐g‐NIPAM) copolymers have temperature‐ and pH‐sensitivities, and these different composition graft copolymers have different lower critical solution temperature (LCST) and critical phase transition pH values. The LCST of graft copolymer decreases with increasing PNIPAM content, and the critical phase transition pH value increases with increasing Poly(N‐isopropylacrylamide) (PNIPAM) content. At room temperature (20°C), different composition of P(AA‐g‐NIPAM) graft copolymers in dilute aqueous solutions (0.001 wt %) have a loose conformation, and there is no hydrophobic microdomain formation within researching pH range (pH 3 ～ 10). In addition, for the P(AA‐g‐NIPAM) aqueous solutions, transition from coil to globular is an incomplete reversible process in heating and cooling cycles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Swelling behavior of pH‐ and temperature‐sensitive copolymers containing 2‐hydroxy‐ethyl methacrylate and N‐vinyl‐2‐pyrrolidone crosslinked with new crosslinkers

Copolymers of 2‐hydroxyethyl methacrylate (HEMA) and N‐vinyl‐2‐pyrrolidone (VP) and homopolymers of HEMA and VP were crosslinked in the presence of different mol% of melamine trimethacrylamide (MMAm) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked HEMA and VP copolymers, VP and HEMA series were evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MMAm concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. This behavior is explained on the basis that amide groups of VP or crosslinkers could be hydrolyzed to form negatively charged carboxylate ion groups in the produced networks in response to an external pH variation. Copyright © 2004 Society of Chemical Industry     

Self‐organization of amphiphilic poly[2‐(methacryloyloxy)ethyl phosphorylcholine] carrying tocopheryl moieties as terminal groups

Poly[2‐(methacryloyloxy)ethyl phosphorylcholine](PMPC) with one pendant tocopheryl moiety at the polymer terminus (PMPC‐Toco) was prepared by the radical polymerization of 2‐(methacryloyloxy)ethyl phosphorylcholine (MPC) initiated with 4,4′‐azobis[(3‐tocopheryl)‐4‐cyanopentanoate] in the presence of 2‐mercaptoethanol as a chain transfer reagent. The self‐organization of PMPC‐Toco was analyzed with fluorescence and ¹H‐NMR measurements. The critical micelle concentrations of PMPC‐Toco with [η] = 0.25, 0.13, 0.10, and 0.05 dL g^?1 were found to be 200, 100, 100, and 90 mg L^?1, respectively. The blood compatibility of PMPC‐Toco was evaluated from the Michaelis constant (K_m) for the enzymatic reaction of thrombin and a synthetic substrate, S‐2238, in the presence of PMPC‐Toco. The K_m values were 0.21, 0.23, 0.36, and 0.21 for PMPC‐Toco‐1, 2, 3, and PMPC ([η] = 0.56 dL g^?1), respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of cationic polymeric salts: derivatives of 2‐(dimethylamino)ethyl‐2‐methacrylate,containing oligomeric ethylene oxide side‐chains

A novel set of cationic polyelectrolytes has been prepared. The polyelectrolytes have a high cationicity with each segment carrying one positively charged quaternary ammonium group. The polyelectrolytes also contain grafted oligo(ethylene oxide) (EO) chains. The grafted EO chains are, according to NMR measurements, six units long. The graft density of EO chains has been varied and polymers having approximately 100%, 20% and 10% of the segments with a grafted EO chain have been prepared. The obtained products were characterized using ¹H and ¹³C NMR spectroscopy. Aqueous solutions of the cationic polymers were characterized by dynamic light‐scattering (DLS) measurements. It was found to be important to include a radical inhibitor to prevent crosslinking reactions during isolation and purification. In general the DLS measurements showed a bimodal size distribution. The majority of the polymers (about 75 wt%) were found to have a hydrodynamic radius of 6–8 nm, with the remaining polymers being dominated by a fraction with a hydrodynamic radius in the range 120–140 nm. © 2003 Society of Chemical Industry     

Sulfur containing poly(N‐isopropylacrylamide) copolymer hydrogels for thermosensitive extraction of gold(III) ions

Poly[N‐isopropylacrylamide‐co‐[2‐(methylthio)ethyl methacrylate]], poly(NIPA‐co‐MTEMA) gels were prepared by free radical polymerization in aqueous solution. The homogeneous and heterogeneous gels were prepared by using 10 mM MTEMA in 5.0%(v/v) ethanol at 10°C and 30 mM MTEMA in 20%(v/v) ethanol at 50°C, in 1.0 and 1.5M NIPA solution, respectively. Homogeneous and heterogeneous gels had swelling ratios at 540 ± 28% and 551 ± 37%, respectively. The extraction of Au(III) ion was studied in batch method. The optimum pHs for the extraction of Au(III) by homogeneous and heterogeneous gels were 1–3 and 1–5, respectively. The suitable extraction time was 3 h at 50°C when using a rod‐shaped copolymer (0.7 cm diameter and 1 cm length). The adsorption behavior obeyed the Langmuir and Freundlich isotherms. The maximum sorption capacities of Au(III) onto homogeneous and heterogeneous gels were 62.8 and 322 μmol/g, respectively. The desorption equilibrium was reached within 2–3 h at 10°C by 0.1M thiourea in 5%(v/v) HCl. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

pH‐ and temperature‐induced release of doxorubicin from multilayers of poly(2‐isopropyl‐2‐oxazoline) and tannic acid

We present a simple strategy to prepare doxorubicin (DOX) containing hydrogen‐bonded films of poly(2‐isopropyl‐2‐oxazoline) (PIPOX) and tannic acid (TA) which release DOX in acidic conditions while releasing a minimal amount of DOX at physiological pH. Water soluble complexes of TA and DOX (TA ? DOX) were prepared prior to film construction. PIPOX and TA ? DOX were deposited at the surface at pH 6.5 using the layer‐by‐layer (LbL) technique. We found that multilayers released a minimal amount of DOX at physiological pH due to further ionization of TA with increasing pH and enhanced electrostatic interactions between TA and DOX. In contrast, pH‐induced release of DOX was observed in moderately acidic conditions due to protonation of TA as the acidity increased and electrostatic interactions between TA and DOX decreased. Moreover, we found that raising the temperature from 25 °C to 37.5 °C increased the amount of DOX released from the surface. This can be rationalized with the conformational changes within the multilayers correlated with the lower critical solution temperature behaviour of PIPOX and increased kinetic energy of DOX molecules. Considering the acidic nature of tumour tissues and important biological properties of PIPOX and TA, these multilayers are promising for pH‐ and temperature‐triggered release of DOX from surfaces. © 2017 Society of Chemical Industry     

Amphiphilic 2‐ethyl hexyl methacrylate‐b‐N,N′‐dimethylacrylamide diblock copolymer monolayer behaviour at the air − water interface†

The surface activities of two amphiphilic diblock copolymers containing 2‐ethyl hexyl methacrylate‐b‐N,N′‐dimethylacrylamide (EHMA‐b‐DMA) possessing hydrophobic segments of different chain lengths were studied. Toward this end, surface pressure?area (π?A) isotherms, static and dynamic elasticities and the ν exponent of the excluded volume of polymers forming monolayers at the air?water interface were measured. The degree of hydrophobicity of the diblock copolymers was estimated by determining their surface energy values from contact angle measurements. The morphology of the monolayer at different surface pressures was studied by Brewster angle microscopy. Both copolymers were observed to form stable and elastic monolayers, and their collapse was observed to occur at similar surface pressures. Langmuir?Blodgett films were successfully deposited onto mica and silicon wafers and analysed by atomic force microscopy. © 2014 Society of Chemical Industry     

Synthesis of a poly(methyl methacrylate)‐b‐poly[2‐(N,N‐dimethylamino) ethyl methacrylate] block copolymer and its effects on the surface charges and pH‐responsive properties of poly(vinylidene fluoride) blend membranes

A poly(methyl methacrylate) (PMMA)‐b‐poly[2‐(N,N‐dimethylamino) ethyl methacrylate] (PDMAEMA) block copolymer was successfully synthesized by a reversible addition–fragmentation chain‐transfer method. The resulting copolymer was used to prepare poly(vinylidene fluoride) blend membranes via a phase‐inversion technique. The polymorphism, structure, and properties of the blend membranes were investigated by Fourier transform infrared spectrometry, scanning electron microscopy (SEM), ζ potential analysis, and filtration. The results indicate that PMMA‐b‐PDMAEMA could migrate onto the surface of the membrane during the coagulation process, and more of the β‐crystal phase appeared with the increase of the block copolymer in the membranes. The surface morphology and cross section of the membranes were also affected by the copolymer, as shown by SEM. The ζ‐potential results show that the surface charges of the membrane could be changed from positive to negative at an isoelectric point as the pH increased. The blend membrane also exhibited good pH sensitivity, and its water flux showed a great dependence on pH. The filtration experiment also indicated that the blend membrane had good hydrophilicity and antifouling properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40685.