Standardization of milk using cold ultrafiltration retentates for the manufacture of Swiss cheese: effect of altering coagulation conditions on yield and cheese quality

Fortification of cheesemilk with membrane retentates is often practiced by cheesemakers to increase yield. However, the higher casein (CN) content can alter coagulation characteristics, which may affect cheese yield and quality. The objective of this study was to evaluate the effect of using ultrafiltration (UF) retentates that were processed at low temperatures on the properties of Swiss cheese. Because of the faster clotting observed with fortified milks, we also investigated the effects of altering the coagulation conditions by reducing the renneting temperature (from 32.2 to 28.3°C) and allowing a longer renneting time before cutting (i.e., giving an extra 5 min). Milks with elevated total solids (TS; ∼13.4%) were made by blending whole milk retentates (26.5% TS, 7.7% CN, 11.5% fat) obtained by cold (<7°C) UF with part skim milk (11.4% TS, 2.5% CN, 2.6% fat) to obtain milk with CN:fat ratio of approximately 0.87. Control cheeses were made from part-skim milk (11.5% TS, 2.5% CN, 2.8% fat). Three types of UF fortified cheeses were manufactured by altering the renneting temperature and renneting time: high renneting temperature = 32.2°C (UFHT), low renneting temperature = 28.3°C (UFLT), and a low renneting temperature (28.3°C) plus longer cutting time (+5 min compared to UFLT; UFLTL). Cutting times, as selected by a Wisconsin licensed cheesemaker, were approximately 21, 31, 35, and 32 min for UFHT, UFLT, UFLTL, and control milks, respectively. Storage moduli of gels at cutting were lower for the UFHT and UFLT samples compared with UFLTL or control. Yield stress values of gels from the UF-fortified milks were higher than those of control milks, and decreasing the renneting temperature reduced the yield stress values. Increasing the cutting time for the gels made from the UF-fortified milks resulted in an increase in yield stress values. Yield strain values were significantly lower in gels made from control or UFLTL milks compared with gels made from UFHT or UFLT milks. Cheese composition did not differ except for fat content, which was lower in the control compared with the UF-fortified cheeses. No residual lactose or galactose remained in the cheeses after 2 mo of ripening. Fat recoveries were similar in control, UFHT, and UFLTL but lower in UFLT cheeses. Significantly higher N recoveries were obtained in the UF-fortified cheeses compared with control cheese. Because of higher fat and CN contents, cheese yield was significantly higher in UF-fortified cheeses (∼11.0 to 11.2%) compared with control cheese (∼8.5%). A significant reduction was observed in volume of whey produced from cheese made from UF-fortified milk and in these wheys, the protein was a higher proportion of the solids. During ripening, the pH values and 12% trichloroacetic acid-soluble N levels were similar for all cheeses. No differences were observed in the sensory properties of the cheeses. The use of UF retentates improved cheese yield with no significant effect on ripening or sensory quality. The faster coagulation and gel firming can be decreased by altering the renneting conditions.     

A model system for studying the effects of colloidal calcium phosphate concentration on the rheological properties of Cheddar cheese

A novel model system was developed for studying the effects of colloidal Ca phosphate (CCP) concentration on the rheological properties of Cheddar cheese, independent of proteolysis and any gross compositional variation. Cheddar cheese slices (disks; diameter = 50 mm, thickness = 2 mm) were incubated in synthetic Cheddar cheese aqueous phase solutions for 6 h at 22°C. Control (unincubated) Cheddar cheese had a total Ca and CCP concentration of 2.80 g/100 g of protein and 1.84 g of Ca/100 g of protein, respectively. Increasing the concentration of Ca in the synthetic Cheddar cheese aqueous phase solution incrementally in the range from 1.39 to 8.34 g/L significantly increased the total Ca and CCP concentration of the cheese samples from 2.21 to 4.59 g/100 g of protein and from 1.36 to 2.36 g of Ca/100 g of protein, respectively. Values of storage modulus (index of stiffness) at 70°C increased significantly with increasing concentrations of CCP, but the opposite trend was apparent at 20°C. The maximum in loss tangent (index of meltability/flowability) decreased significantly with increasing concentration of CCP, and there was no significant effect on the temperature at which the maximum in loss tangent occurred (68 to 70°C). Fourier transform mechanical spectroscopy showed the frequency dependence of all of the cheese samples increased with increasing temperature; however, solubilization of CCP increased the frequency dependence of the cheese matrix only in the high temperature region (i.e., >35°C). These results support earlier studies that hypothesized that the concentration of CCP strongly modulates the rheological properties of cheese.     

Short communication: Norbixin and bixin partitioning in Cheddar cheese and whey

The Cheddar cheese colorant annatto is present in whey and must be removed by bleaching. Chemical bleaching negatively affects the flavor of dried whey ingredients, which has established a need for a better understanding of the primary colorant in annatto, norbixin, along with cheese color alternatives. The objective of this study was to determine norbixin partitioning in cheese and whey from full-fat and fat-free Cheddar cheese and to determine the viability of bixin, the nonpolar form of norbixin, as an alternative Cheddar cheese colorant. Full-fat and fat-free Cheddar cheeses and wheys were manufactured from colored pasteurized milk. Three norbixin (4% wt/vol) levels (7.5, 15, and 30 mL of annatto/454 kg of milk) were used for full-fat Cheddar cheese manufacture, and 1 norbixin level was evaluated in fat-free Cheddar cheese (15 mL of annatto/454 kg of milk). For bixin incorporation, pasteurized whole milk was cooled to 55°C, and then 60 mL of bixin/454 kg of milk (3.8% wt/vol bixin) was added and the milk homogenized (single stage, 8 MPa). Milk with no colorant and milk with norbixin at 15 mL/454 kg of milk were processed analogously as controls. No difference was found between the norbixin partition levels of full-fat and fat-free cheese and whey (cheese mean: 79%, whey: 11.2%). In contrast to norbixin recovery (9.3% in whey, 80% in cheese), 1.3% of added bixin to cheese milk was recovered in the homogenized, unseparated cheese whey, concurrent with higher recoveries of bixin in cheese (94.5%). These results indicate that fat content has no effect on norbixin binding or entrapment in Cheddar cheese and that bixin may be a viable alternative colorant to norbixin in the dairy industry.     

Changes in organic acids during ripening of cheeses made from raw, pasteurized or high-pressure-treated goats’ milk

Organic acids of cheeses made from raw (RA), pasteurized (PA; 72°C, 15 s) or pressure-treated (PR; 500 MPa, 15 min, 20°C) goats’ milk were qualitatively and quantitatively assessed during ripening. Nine organic acids (citric, pyruvic, malic, lactic, formic, acetic, uric, propionic and butyric) were analysed in each sample by HPLC.Milk treatment did not affect the total organic acids content of 1-day-old cheeses, which increased steadily from day 1 to day 60. At the end of ripening, RA and PR milk cheeses both exhibited higher concentration of organic acids than in those made from PA milk.Lactic acid was found in higher concentration in PR milk cheese from 30 days of ripening. The RA milk cheese, that showed the highest nonstarter lactic acid bacteria counts, were characterized by an elevated amount of propionic and acetic acids. These cheeses also were negatively correlated with both pyruvic and citric acid contents. The PA milk cheese showed a high level of malic acid, and was clearly differentiate from RA and PR milk cheeses by its low level of butyric acid.     

Modeling of proteolysis and lipolysis in Iranian white brine cheese

The simultaneous effects of processing variables such as ripening time (20–60 days), ripening temperature (6–10 °C), level of rennet added (1–2 g/100 kg milk) and brine concentration (8–14%, w/v) on the proteolysis, lipolysis and sensory score of Iranian white brined cheese (Feta type) were explored by the means of response surface methodology. The most important effect in proteolytical terms was produced by ripening temperature and ripening time in linear form, but level of rennet added and brine concentration were also significant at the 5% level. In terms of lipolysis, ripening time was dominant factor in both linear and quadratic forms; quadratic effect of ripening temperature was greater than its linear effect.     

Improvement of texture and structure of reduced-fat Cheddar cheese by exopolysaccharide-producing lactococci

The objective of this study was to evaluate the effect of capsular and ropy exopolysaccharide (EPS)-producing strains of Lactococcus lactis ssp. cremoris on textural and microstructural attributes during ripening of 50%-reduced-fat Cheddar cheese. Cheeses were manufactured with added capsule- or ropy-forming strains individually or in combination. For comparison, reduced-fat cheese with or without lecithin added at 0.2% (wt/vol) to cheese milk and full-fat cheeses were made using EPS-nonproducing starter, and all cheeses were ripened at 7°C for 6 mo. Exopolysaccharide-producing strains increased cheese moisture retention by 3.6 to 4.8% and cheese yield by 0.28 to 1.19 kg/100 kg compared with control cheese, whereas lecithin-containing cheese retained 1.4% higher moisture and had 0.37 kg/100 kg higher yield over the control cheese. Texture profile analyses for 0-d-old cheeses revealed that cheeses with EPS-producing strains had less firm, springy, and cohesive texture but were more brittle than control cheeses. However, these effects became less pronounced after 6 mo of ripening. Using transmission electron microscopy, fresh and aged cheeses with added EPS-producing strains showed a less compact protein matrix through which larger whey pockets were dispersed compared with control cheese. The numerical analysis of transmission electron microscopy images showed that the area in the cheese matrix occupied by protein was smaller in cheeses with added EPS-producing strains than in control cheese. On the other hand, lecithin had little impact on both cheese texture and microstructure; after 6 mo, cheese containing lecithin showed a texture profile very close to that of control reduced-fat cheese. The protein-occupied area in the cheese matrix did not appear to be significantly affected by lecithin addition. Exopolysaccharide-producing strains could contribute to the modification of cheese texture and microstructure and thus modify the functional properties of reduced-fat Cheddar cheese.     

Milk fat thermal properties and solid fat content in emmental cheese: a differential scanning calorimetry study

The experiments reported in this study give deeper insight into the crystallization of milk fat in Emmental cheese, which is the most widely consumed hard cheese in France. Differential scanning calorimetry (DSC) was used to monitor the thermal properties of milk fat after the main stages involved during manufacture of Emmental cheese. By heating the samples to 60°C to eliminate their thermal history and cooling them at 2°C/min, the liquid → solid phase transition of fat was investigated. Confocal laser scanning microscopy was used to characterize in situ the supramolecular organization of milk fat dispersed in the casein matrix. The destabilization of fat globules by aggregation or coalescence and the formation of free fat during the manufacture altered the thermal properties of milk fat by increasing the initial temperature of crystallization and by the formation of 2 overlapping exotherms. The melting properties of the crystalline structures formed by fat at the temperatures used for ripening (12, 21, and 4°C) were examined. Differential scanning calorimetry was used to determine the ratio of solid to liquid fat; that is, the amount of fat that is crystallized, by dividing the partial enthalpy of melting of the fat for ripening temperature by the total enthalpy of melting of the same fat extracted from cheese. This study shows, for the first time, that milk fat is partially crystallized in Emmental cheese: about 55.7 ± 3.5% of fat is solid at 4°C at the end of ripening. Polymorphic phase transitions of milk fat are also suggested during ripening of Emmental cheese.     

Yield, composition and rheological characteristics of cheddar cheese made with high pressure processed milk

High Pressure (HP) treatment of milk prior to cheese-making was shown to increase the yield of cheese due to increased protein and moisture retention in cheese. Cheeses were made with raw milk or milk treated with high temperature short-time (HTST) pasteurization, and HP treatments at two levels (483 and 676 MPa) at 10 °C, 483 MPa HP at 30 °C, and 483 MPa HP at 40 °C. Cheese yield, total solids, protein, fat and salt contents were evaluated, and fat and protein recovery indices were calculated. Cheeses from HP treatments of 676 MPa at 10 °C and 483 MPa at 30 °C exhibited wet yields of 11.40% and 11.54%, respectively. Protein recovery was 79.9% for HP treatment of 676 MPa at 10 °C. The use of slightly higher pressurization temperatures increased moisture retention in cheese. Visco-elasticity of cheeses was determined by dynamic oscillatory testing and a creep-recovery test. Rheological parameters such as loss (G″) and storage (G′) moduli were dependent on oscillation frequency. At high (173 rad/s) and low (2.75 rad/s) angular frequencies, cheeses made from milk treated at 483 MPa at 10 °C behaved more solid-like than other treatments. Creep tests indicated that cheeses from milk treated with 483 MPa HP at 10 °C showed the smallest instantaneous compliance (J_o), confirming the more solid-like behavior of cheese from the 483 MPa at 10 °C treatment compared to the behavior of cheeses from other treatments. Cheeses made with pasteurized milk were more deformable, exhibited less solid-like behavior than cheeses made with HP treated milk, as shown by the J_o value. With more research into bacteriological implications, HP treatment of raw milk can augment Cheddar cheese yield with better curd formation properties.     

Enhanced lactose cheese milk does not guarantee calcium lactate crystals in finished cheddar cheese

Three experimental batches of Cheddar cheese were manufactured in duplicate, with standardization of the initial cheese-milk lactose content to high (5.24%), normal (4.72%, control), and low lactose (3.81%). After 35 d of aging at 4.4°C, the cheeses were subjected to temperature abuse (24 h at 21°C, unopened) and contamination (24 h at 21°C, packages opened and cheeses contaminated with crystal-containing cheese). After aging for 167 d, residual cheese lactose (0.08 to 0.43%) and l(+)-lactate concentrations (1.37 to 1.60%) were high and d(−)-lactate concentrations were low (<0.03%) for all cheeses. No significant differences in lactose concentrations were attributable to temperature abuse or contamination. No significant differences in l(+)- or d(−)-lactate concentrations were attributable to temperature abuse. However, concentrations of l(+)-lactate were significantly lower and d(−)-lactate were significantly higher in contaminated cheeses than in control cheeses, indicating inoculation (at d 35) with heterofermentative nonstarter lactic acid bacteria able to racemize l(+)-lactate to d(−)-lactate. The fact that none of the cheeses exhibited crystals after 167 d demonstrates that high cheese milk or residual lactose concentrations do not guarantee crystal formation. Contamination with nonstarter lactic acid bacteria can significantly contribute to d(−)-lactate accumulation in cheese.     

Effect of type of concentrated sweet cream buttermilk on the manufacture, yield, and functionality of pizza cheese

Sweet cream buttermilk (SCB) is a rich source of phospholipids (PL). Most SCB is sold in a concentrated form. This study was conducted to determine if different concentration processes could affect the behavior of SCB as an ingredient in cheese. Sweet cream buttermilk was concentrated by 3 methods: cold ( < 7°C) UF, cold reverse osmosis (RO), and evaporation (EVAP). A washed, stirred-curd pizza cheese was manufactured using the 3 different types of concentrated SCB as an ingredient in standardized milk. Cheesemilks of casein:fat ratio of 1.0 and final casein content ∼2.7% were obtained by blending ultrafiltered (UF)-SCB retentate (19.9% solids), RO-SCB retentate (21.9% solids), or EVAP-SCB retentate (36.6% solids) with partially skimmed milk (11.2% solids) and cream (34.6% fat). Control milk (11.0% solids) was standardized by blending partially skimmed milk with cream. Cheese functionality was assessed using dynamic low-amplitude oscillatory rheology, UW Meltprofiler (degree of flow after heating to 60°C), and performance of cheese on pizza. Initial trials with SCB-fortified cheeses resulted in ∼4 to 5% higher moisture (51 to 52%) than control cheese (∼47%). In subsequent trials, procedures were altered to obtain similar moisture content in all cheeses. Fat recoveries were significantly lower in RO- and EVAP-SCB cheeses than in control or UF-SCB cheeses. Nitrogen recoveries were not significantly different but tended to be slightly lower in control cheeses than the various SCB cheeses. Total PL recovered in SCB cheeses (∼32 to 36%) were lower than control (∼41%), even though SCB is high in PL. From the rheology test, the loss tangent curves at temperatures > 40°C increased as cheese aged up to a month and were significantly lower in SCB cheeses than the control, indicating lower meltability. Degree of flow in all the cheeses was similar regardless of the treatment used, and as cheese ripened, it increased for all cheeses. Trichloroacetic acid-soluble N levels were similar in the control and SCB-fortified cheese. On baked pizza, cheese made from milk fortified with UF-SCB tended to have the lowest amount of free oil, but flavor attributes of all cheeses were similar. Addition of concentrated SCB to standardize cheesemilk for pizza cheese did not adversely affect functional properties of cheese but increased cheese moisture without changes in manufacturing procedure.     

Nonstarter lactic acid bacteria biofilms and calcium lactate crystals in Cheddar cheese

A sanitized cheese plant was swabbed for the presence of nonstarter lactic acid bacteria (NSLAB) biofilms. Swabs were analyzed to determine the sources and microorganisms responsible for contamination. In pilot plant experiments, cheese vats filled with standard cheese milk (lactose:protein = 1.47) and ultrafiltered cheese milk (lactose:protein = 1.23) were inoculated with Lactococcus lactis ssp. cremoris starter culture (8 log cfu/mL) with or without Lactobacillus curvatus or Pediococci acidilactici as adjunct cultures (2 log cfu/mL). Cheddar cheeses were aged at 7.2 or 10°C for 168 d. The raw milk silo, ultrafiltration unit, cheddaring belt, and cheese tower had NSLAB biofilms ranging from 2 to 4 log cfu/100 cm². The population of Lb. curvatus reached 8 log cfu/g, whereas P. acidilactici reached 7 log cfu/g of experimental Cheddar cheese in 14 d. Higher NSLAB counts were observed in the first 14 d of aging in cheese stored at 10°C compared with that stored at 7.2°C. However, microbial counts decreased more quickly in Cheddar cheeses aged at 10°C compared with 7.2°C after 28 d. In cheeses without specific adjunct cultures (Lb. curvatus or P. acidilactici), calcium lactate crystals were not observed within 168 d. However, crystals were observed after only 56 d in cheeses containing Lb. curvatus, which also had increased concentration of d(−)-lactic acid compared with control cheeses. Our research shows that low levels of contamination with certain NSLAB can result in calcium lactate crystals, regardless of lactose:protein ratio.     

The effect of elevated temperature on ripening of Dutch type cheese

The aim of this study was to explore the effect of elevated temperature (16 °C) on ripening of Dutch-type cheese. Three slices of each cheese block were further divided into three layers. The processes in the control samples of cheese ripening at 10 °C were also monitored. The contents of free amino acids in accelerated cheese were two times higher than were those in control samples. The highest contents of free amino acids were observed in the cores of all slices of cheeses ripening at both temperatures. The contents of tyramine, in layers of the studied slices, reached almost 500 mg kg⁻¹ during 56 days of the experiment. The contents of biogenic amines in the edges grew even higher. Accelerated cheese showed faster equalisation of hardness than did control samples. The increase of temperature by 6 °C can reduce the ripening time in cellars by approximately one half.     

The effect of sodium reduction with and without potassium chloride on the survival of Listeria monocytogenes in Cheddar cheese

Sodium chloride (NaCl) in cheese contributes to flavor and texture directly and by its effect on microbial and enzymatic activity. The salt-to-moisture ratio (S/M) is used to gauge if conditions for producing good-quality cheese have been met. Reductions in salt that deviate from the ideal S/M range could result in changing culture acidification profiles during cheese making. Lactococcus lactis ssp. lactis or Lc. lactis ssp. cremoris are both used as cultures in Cheddar cheese manufacture, but Lc. lactis ssp. lactis has a higher salt and pH tolerance than Lc. lactis ssp. cremoris. Both salt and pH are used to control growth and survival of Listeria monocytogenes and salts such as KCl are commonly used to replace the effects of NaCl in food when NaCl is reduced. The objectives of this project were to determine the effects of sodium reduction, KCl use, and the subspecies of Lc. lactis used on L. monocytogenes survival in stirred-curd Cheddar cheese. Cheese was manufactured with either Lc. lactis ssp. lactis or Lc. lactis ssp. cremoris. At the salting step, curd was divided and salted with a concentration targeted to produce a final cheese with 600 mg of sodium/100 g (control), 25% reduced sodium (450 mg of sodium/100 g; both with and without KCl), and low sodium (53% sodium reduction or 280 mg of sodium/100 g; both with and without KCl). Potassium chloride was added on a molar equivalent to the NaCl it replaced to maintain an equivalent S/M. Cheese was inoculated with a 5-strain cocktail of L. monocytogenes at different times during aging to simulate postprocessing contamination, and counts were monitored over 27 or 50 d, depending on incubation temperature (12 or 5°C, respectively). In cheese inoculated with 4 log₁₀ cfu of L. monocytogenes/g 2 wk after manufacture, viable counts declined by more than 3 log₁₀ cfu/g in all treatments over 60 d. When inoculated with 5 log₁₀ cfu/g at 3 mo of cheese age, L. monocytogenes counts in Cheddar cheese were also reduced during storage, but by less than 1.5 log₁₀ cfu/g after 50 d. However, cheese with a 50% reduction in sodium without KCl had higher counts than full-sodium cheese at the end of 50 d of incubation at 4°C when inoculated at 3 mo. When inoculated at 8 mo postmanufacture, this trend was only observed in 50% reduced sodium with KCl, for cheese manufactured with both cultures. This enhanced survival for 50% reduced-sodium cheese was not seen when a higher incubation temperature (12°C) was used when cheese was inoculated at 3 mo of age and monitored for 27 d (no difference in treatments was observed at this incubation temperature). In the event of postprocessing contamination during later stages of ripening, L. monocytogenes was capable of survival in Cheddar cheese regardless of which culture was used, whether or not sodium had been reduced by as much as 50% from standard concentrations, or if KCl had been added to maintain the effective S/M of full-sodium Cheddar cheese.     

Lipolysis in cheddar cheese made from raw, thermized, and pasteurized milks

The evolution of free fatty acids (FFA) was monitored over 168 d of ripening in Cheddar cheeses manufactured from good quality raw milk (RM), thermized milk (TM; 65°C × 15 s), and pasteurized milk (PM; 72°C × 15 s). Heat treatment of the milk reduced the level and diversity of raw milk microflora and extensively or wholly inactivated lipoprotein lipase (LPL) activity. Indigenous milk enzymes or proteases from RM microflora influenced secondary proteolysis in TM and RM cheeses. Differences in FFA in the RM, TM, and PM influenced the levels of FFA in the subsequent cheeses at 1 d, despite significant losses of FFA to the whey during manufacture. Starter esterases appear to be the main contributors of lipolysis in all cheeses, with LPL contributing during production and ripening in RM and, to a lesser extent, in TM cheeses. Indigenous milk microflora and nonstarter lactic acid bacteria appear to have a minor contribution to lipolysis particularly in PM cheeses. Lipolytic activity of starter esterases, LPL, and indigenous raw milk microflora appeared to be limited by substrate accessibility or environmental conditions over ripening.     

Valuation of milk composition and genotype in cheddar cheese production using an optimization model of cheese and whey production

A mass balance optimization model was developed to determine the value of the κ-casein genotype and milk composition in Cheddar cheese and whey production. Inputs were milk, nonfat dry milk, cream, condensed skim milk, and starter and salt. The products produced were Cheddar cheese, fat-reduced whey, cream, whey cream, casein fines, demineralized whey, 34% dried whey protein, 80% dried whey protein, lactose powder, and cow feed. The costs and prices used were based on market data from March 2004 and affected the results. Inputs were separated into components consisting of whey protein, ash, casein, fat, water, and lactose and were then distributed to products through specific constraints and retention equations. A unique 2-step optimization procedure was developed to ensure that the final composition of fat-reduced whey was correct. The model was evaluated for milk compositions ranging from 1.62 to 3.59% casein, 0.41 to 1.14% whey protein, 1.89 to 5.97% fat, and 4.06 to 5.64% lactose. The κ casein genotype was represented by different retentions of milk components in Cheddar cheese and ranged from 0.715 to 0.7411 kg of casein in cheese/kg of casein in milk and from 0.7795 to 0.9210 kg of fat in cheese/kg of fat in milk. Milk composition had a greater effect on Cheddar cheese production and profit than did genotype. Cheese production was significantly different and ranged from 9,846 kg with a high-casein milk composition to 6,834 kg with a high-fat milk composition per 100,000 kg of milk. Profit (per 100,000 kg of milk) was significantly different, ranging from $70,586 for a high-fat milk composition to $16,490 for a low-fat milk composition. However, cheese production was not significantly different, and profit was significant only for the lowest profit ($40,602) with the κ-casein genotype. Results from this model analysis showed that the optimization model is useful for determining costs and prices for cheese plant inputs and products, and that it can be used to evaluate the economic value of milk components to optimize cheese plant profits.     

Evaluation of alginate-pectin capsules in Cheddar cheese as a food carrier for the delivery of folic acid

Edible gums were evaluated for folic acid encapsulation efficiency as single and mixed polymers. Alginate and pectin yielded the highest encapsulation efficiencies, 216 and 196 μg/100 g, respectively. Upon being combined and the encapsulation conditions optimized, the alginate-pectin (alg-pect) mixture resulted in 360 μg/100 g of folic acid being encapsulated. The alg-pect capsules were tested for their stability in a milk system where pH was adjusted from 6.7 to 4.5 over a 4 h period. Folic acid retention under the test conditions was retained at 360 μg/100 g within the alg-pect capsules indicating their ability to remain intact in a milk system. Stress tolerance of the capsules was tested under simulated cheese press pressures for 4 h until a force of 0.814 N/cm² was detected. Folic acid retention of up to 288 μg/100 g was recorded for the alg-pect capsules. Three stages in Cheddar cheese manufacturing namely; addition of capsules in the milk, incorporation of capsules after milling the curd and injection into the pressed block of raw cheese, were studied for capsules distribution. The former had the most even distribution of capsules while the latter two had poor and irregular distribution. Encapsulated folic acid showed more stability (360 μg/100 g) than the free folic acid (109 μg/100 g) in Cheddar cheese during the 3 months ripening period.