共查询到20条相似文献,搜索用时 109 毫秒
1.
掺杂金属离子对Ca3Co4O9的热电性能的影响 总被引:4,自引:1,他引:3
采用溶胶-凝胶法,在常压空气中,经850℃烧结4h制备了Ca3Co4O9掺杂不同金属离子M(Na ,Ag ,La2 )的(Ca1-xMx)3Co4O9热电材料.通过X射线衍射、扫描电镜等对材料的微结构进行了表征,重点考察了掺杂不同金属离子对Ca3Co4O9中温热电性能参数Seebeck系数、电导率和功率因子的影响.结果表明:金属掺杂的(Ca1-xMx)3Co4O9热电材料具有致密的内部结构,并能够明显改善Ca3Co4O9的热电性能,尤其是掺杂Na 样品的热电性能有较为明显的提高,并且掺杂离子浓度对改善热电性能也有一定影响,组成为(Ca0.90Na0.10)3Co4O9时的功率因子提高最明显. 相似文献
2.
采用溶胶凝胶法制备了Ca3Co2O6粉末.在常压烧结的情况下,通过调节烧成温度、保温时间以及利用元素掺杂来改善材料的热电性能,并用X射线衍射仪和SEM对其进行分析.试验结果表明:合理的元素掺杂有利于材料的热电性能的提高;要严格控制Ca3Co2O6晶体的大小,烧成温度在900℃左右热电性能较好. 相似文献
3.
本实验采用溶胶-凝胶法制备了Ca3Co4O9陶瓷,寻求了其合适的制备工艺,并对陶瓷的显微结构、物相组成、元素组成等进行了表征测试.实验结果表明:煅烧温度为800~900 ℃时均能得到纯相Ca3Co4O9;Ca3Co4O9为取向无规则层片状组织,颗粒尺寸均匀,为2 μm左右;样品的致密度不高,气孔率相对较大. 相似文献
4.
《硅酸盐学报》2015,(9)
通过Co2+对Mg2+的取代,探讨不同x值下Ca(Mg1–xCox)Si2O6陶瓷的物相组成、烧结性能、微观结构以及微波介电性能。结果表明:Co2+对Mg2+的取代,可将Ca(Mg1–xCox)Si2O6陶瓷的烧结温度从1300℃降低至1 175℃;Co2+在Ca(Mg,Co)Si2O6中的固溶极限在0.2~0.3之间,Mg2+在Ca(Co,Mg)Si2O6中的固溶极限在0.3~0.4之间,当x位于0.3~0.6之间时,出现Ca(Mg,Co)Si2O6与Ca(Co,Mg)Si2O6两相共存;无论是Co2+固溶入Ca Mg Si2O6,形成Ca(Mg,Co)Si2O6,还是Mg2+固溶进入Ca Co Si2O6,形成Ca(Co,Mg)Si2O6,陶瓷晶粒均随固溶度的增大,出现异常长大,进而恶化陶瓷的品质因数。当x=0.5时,Ca(Mg,Co)Si2O6与Ca(Co,Mg)Si2O6两相共存,有效细化了陶瓷晶粒尺寸,1 225℃烧结后,陶瓷的微波介电性能为εr=8.04,品质因数Q×f=59 108 GHz,谐振频率温度系数τf=–51.02×10–6/℃。 相似文献
5.
6.
7.
采用溶胶-凝胶化学法合成了Ca3Co4O9热电氧化物粉末,分别采用陶瓷烧结工艺方法和放电等离子烧结(Spark Plasma Sintering,SPS)的方法制备了Ca3Co4O9热电氧化物块体材料.利用X射线衍射XRD、扫描电子显微镜SEM和电输运参数测试仪分析了所得样品的物相、微观组织结构、晶粒取向度和电输运性能.结果表明,不同制备方法均可得到纯相的Ca3Co4O9热电氧化物块体材料;通过陶瓷烧结工艺方法制备的Ca3Co4O9热电氧化物块体晶粒取向度较低,但随着成型压力的增加而提高;SPS烧结的方法制备的Ca3Co4O9热电氧化物块体晶粒取向度最高;试样电性能随着晶粒取向度的提高逐渐提高,其中SPS烧结方法制备的块体材料电性能最高,在测试温度最高点700℃时功率因子达3.85 μWmK-2,远高于普通烧结试样. 相似文献
8.
9.
10.
制备工艺对La改性的Ca3Co4O9基陶瓷热电性能的影响 总被引:3,自引:1,他引:2
利用常压烧结、冷等静压成型后常压烧结及热等静压烧结3种不同制备工艺,合成了(Ca0.9La0.1)3Co4O9热电材料。XRD分析表明:不同工艺制备的样品均为Ca3Co4O9相。样品的SEM照片显示:晶粒为片状结构;热等静压烧结制备的样品,其片状结构不明显,但致密度较之另外两种工艺大幅度提高,其相对密度为95%。制备工艺对(Ca0.9La0.1)3Co4O9热电材料Seebeck系数影响不大,但热压烧结样品能大幅度提高(Ca0.9La0.1)3Co4O9电导率。在一定温度范围内,随温度升高,功率因子大幅度增加,对于热压烧结的样品尤为显著。 相似文献
11.
12.
M. S. J. Simmonds W. M. Blaney F. Delle Monache M. Marquina Mac-Quhae G. B. Marini Bettolo 《Journal of chemical ecology》1985,11(12):1593-1599
Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria. 相似文献
13.
14.
Cheng-Le Zhao Shane Porzio Alan Smith Haiyan Ge H. T. Davis L. E. Scriven 《Journal of Coatings Technology and Research》2006,3(2):109-115
Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively.
There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized.
High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without
the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of
fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to
achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic
SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve
F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender
particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing,
and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing
or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually
preserves suspension stability during freezing.
Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago,
IL. Tied for first place in The John A. Gordon Best Paper Competition. 相似文献
15.
Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US
In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae
and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted
in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures
(release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species
(Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species
to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were
exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of
separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles
from the southeastern region of the US. 相似文献
16.
17.
18.
Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed. 相似文献
19.
中蓝晨光化工研究院有限公司《塑料工业》编辑部 《塑料工业》2009,37(3)
收集了2007年7月~2008年6月世界塑料工业的相关资料,介绍了2007~2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍. 相似文献
20.
中蓝晨光化工研究院《塑料工业》编辑部 《塑料工业》2007,35(3):1-25,67
收集了2005年7月~2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。 相似文献