IIR数字滤波器的FPGA实现

应用Matlab工具软件对IIR数字滤波器进行参数计算和仿真.进一步给出了用FPGA实现IIR数字滤波器的硬件电路方案.用VHDL语言描述了FPGA的电路系统设计及其仿真,结果表明设计的IIR数字滤波器满足设计要求.     

基于单电子晶体管的数字滤波器硬件实现

基于互补型单电子晶体管（SET）逻辑门，提出了SET加法器、移位寄存器和ROM的单元电路。在讨论数字滤波器硬件实现原理基础上，由这三个单元电路实现了一个二阶IIR滤波器。SET的SPICE宏模型验证了设计的正确性。     

数字滤波器的选择和设计

本文结合带通滤波器的设计实例，介绍了用MATLAB设计、实现IIR数字滤波器的方法，并分析了硬件实现中的数据处理。     

基于CORDIC算法的数字滤波器设计

FIR和IIR数字滤波器广泛应用于各种数字信号处理系统。从坐标旋转公式出发，阐述了CORDIC算法的原理．同时在FPGA上实现了该算法的设计，并且基于CORDIC算法建立了FIR和IIR数字滤波器的电路模型，使之能在同一电路上通过开关控制集成实现。     

一种五阶IIR型MTI滤波器的设计与实现

本文论讨了一种IIR型滤波器的MATIAB设计和性能分析，及其在DPS（TS101）和FPGA上的两种硬件实现方法。MATLAB仿真和硬件实验均表明，该滤波器能够较好地滤除固定目标回波和低速杂波，满足某型雷达设计技术指标要求     

基于CORDIC算法的IIR数字滤波器硬件设计

IIR数字滤波器广泛应用于各种数字信号处理系统，本文从坐标旋转公式出发，说明了CORDIC算法的原理。并且基于CORDIC算法重构了IIR数字滤波器的实现模型，在保证性能的条件下，很大程度上减小了硬件的花费，并且通过ModelSim5．7和Synplify进行仿真综合，验证了设计的正确性和有效性。     

基于VC++ .net的数字滤波器的设计与实现

介绍了基于VC＋＋.net的IIR数字滤波器的设计与实现。利用LabWindows／CVI所提供的图形界面窗口，实现IIR数字滤波器的功能，程序在VC＋＋．net环境中调试通过。     

一种用于光盘伺服控制系统的通用滤波器的设计

介绍了一种通用FIR／IIR滤波器的设计与实现。该滤波器主要用于光盘伺服系统中，以数字化方式完成传统的PID闭环控制。文中通过对其原理和实际应用的分析，给出其最终实现方案。并用Verilog硬件描述语言完成整个滤波器的设计工作。经波形仿真和FPGA验证表明，设计成功。     

基于嵌入式微计算机6811的IIR数字滤波器设计

无限脉冲响应(IIR)数字滤波器在很多领域中有着广阔的应用。本文用Butterworth法、切比雪夫1法法、切比雪夫2法通过MATLAB仿真软件对几种给定性能的IIR数字滤波器进行了仿真设计,并用基于MOTOROLA公司的M68HC11单片机进行了硬件设计实现,表明数字滤波器具有灵活、方便、功能强的特点。     

基于免疫算法的IIR数字滤波器优化与实现

由于IIR数字滤波器设计实质上是一个非线性高维复杂函数优化问题,文中提出基于具有全局搜索能力强,收敛速度快特点的免疫算法实现IIR数字滤波器优化设计的新方法,给出了IIR滤波器优化设计的数学模型,描述了应用免疫算法优化设计IIR数字滤波器的具体实现步骤。通过低通和高通IIR数字滤波器设计的仿真结果表明方法的有效性和高效性。     

Current-mode continuous-time filters using complementary current mirror pairs

A design of current-mode continuous-time filters for low voltage and high frequency applications using complementary bipolar current mirror pairs is presented. The proposed current-mode filters consist of simple bipolar current mirrors and capacitors and are quite suitable for monolithic integration. Since the filters are based on the integrator type of realization, the proposed method can be used for a wide range of applications. The frequency of the filters can easily be changed by the DC controlling current. A fifth-order Butterworth and a third-order leapfrog filter with tunable cutoff frequencies from 20 MHz to 100 MHz are designed as examples and simulated by SPICE using standard bipolar parameters.     

Inverse Ultraspherical Filters

The inverse ultraspherical filter is derived and its properties analyzed. It is shown that the inverse ultraspherical filter has smaller transition band than the inverse Chebyshev filter under certain circumstances while still maintaining the maximally flat passband characteristic. Filter pole and zero calculations are described and typical magnitude and delay responses generated. Nomographs of inverse ultraspherical filters are also provided for determining filter order and for possible magnitude response optimization.Celestino A. Corral was born in Havana, Cuba. He earned his Bachelors, Masters and Ph.D. degrees in electrical engineering from the University of Miami, Florida, in 1985, 1987, and 1993, respectively. He completed his Ph.D. program under a Patricia Roberts Harris fellowship. From 1988 to 1990 Dr. Corral was a Member of the Technical Staff at Sandia National Laboratories, Albuquerque, New Mexico, where he was involved in the analysis, modeling, and design of custom circuits for piezoelectric sensor components. In 1994, he joined Scientific-Atlanta in Atlanta, Georgia, as an Associate Staff RF Engineer and worked on communication systems and specialized microwave software. In 1997 he was Senior Design Engineer at Origin Data Systems in Boca Raton, Florida, where he had multiple roles in system, hardware, and software development for a novel asset management/RFID system. Currently, Dr. Corral is a Distinguished Member of the Technical Staff in Motorola Labs, Plantation, Florida, and is involved in ultra-wideband, wideband, and propagation research. His interests include circuit and filter theory, communication systems, numerical analysis, signal processing, and constrained optimization. He has published over twenty-five journal and conference papers, has six patents filed, and two trade secrets.Dr. Corral was principal recipient of the Myril B. Reed Best Paper Award for the 40th Midwest Symposium on Circuits and Systems in 1997. Dr. Corral is also the principal recipient of the Ambrose Fleming Premium for IEE Proceedings on Circuits, Devices, and Systems, 2000. Dr. Corral is a Senior Member of IEEE and a member of Omicron Delta Kappa, Tau Beta Pi, and Eta Kappa Nu honor societies.     

波导带通滤波器的精确设计和快速优化

介绍了采用三维微波电磁场仿真软件快速提取直接耦合波导带通滤波器耦合窗口参数的方法,并提出了优化最终模型的快速扫描技术.全波仿真及实验结果表明,该方法能满足波导带通滤波器快速精确设计的要求.     

Design of two-dimensional directional filters

A directional filter has a passband extending fully along a straight line passing through the origin. In its original form the transformation technique, a powerful tool for designing two-dimensional FIR filters, is not useful to design such a filter. In this communication we suggest a few analytical and optimisation-based methods to design directional filters using the transformation technique. The superiority of the proposed methods over existing techniques is demonstrated.     

一种基于CIC滤波器的有效锐化方法研究

介绍了对积分梳状滤波器（CIC滤波器）的有效锐化。所提出的锐化滤波器的结构由两个主要部分组成：一个梳状滤波器的级联部分和一个锐化滤波器部分。所提出的方案使得滤波器中锐化部分的工作速率比输入速率大为降低，其频谱响应特性比传统的也有所改进。通过MATLAB仿真，可看出改进锐化后的滤波器性能更优。     

Miniaturized dielectric waveguide filters

Design techniques for a new class of integrated monolithic high-permittivity ceramic waveguide filters are presented. These filters enable a size reduction of 50% compared to air-filled transverse electromagnetic filters with the same unloaded Q-factor. Designs for Chebyshev and asymmetric generalised Chebyshev filter and a diplexer are presented with experimental results for an 1800 MHz Chebyshev filter and a 1700 MHz generalised Chebyshev filter showing excellent agreement with theory.     

DDC中的抽取滤波器设计及FPGA实现

本文介绍了在数字下变频（DDC）中的抽取滤波器系统设计方法和具体实现方案。采用CIC滤波器、HB滤波器、FIR滤波器三级级联的方式来降低采样率。通过实际验证，证明了设计的可行性。     

一种数字下变频抽取滤波器的设计

对一个针对数字下变频应用的抽取滤波器从设计指标到版图实现的设计过程进行了详细介绍.该抽取滤波器实现了20倍的降采样,由CIC滤波器、CIC补偿滤波器和半带滤波器三级依次串联而成.通过利用抽取滤波器的等价变换和多项分解性质,各滤波器级的硬件电路开销和运行功耗都得到了降低.     

大功率谐波吸收式滤波器设计

介绍了大功率谐波吸收式滤波器的实现电路，这些电路满足了信号分流的技术要求。文中给出了详细的工作原理和测试数据。     

Single-stage line-coupled ac/dc converter with high power factor and ripple-free input current

Single-stage line-coupled ac/dc converter with high power factor and ripple-free input current is proposed. The proposed power factor correction circuit can achieve high power factor and ripple-free input current using a coupled inductor. Experimental results for a 400?W converter at a constant switching frequency of 100?kHz are obtained to show the performance of the proposed converter.