High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%

Organic–inorganic lead halide perovskites are emerging materials for the next‐generation photovoltaics. Lead halides are the most commonly used lead precursors for perovskite active layers. Recently, lead acetate (Pb(Ac)₂) has shown its superiority as the potential replacement for traditional lead halides. Here, we demonstrate a strategy to improve the efficiency for the perovskite solar cell based on lead acetate precursor. We utilized methylammonium bromide as an additive in the Pb(Ac)₂ and methylammonium iodide precursor solution, resulting in uniform, compact and pinhole‐free perovskite films. We observed enhanced charge carrier extraction between the perovskite layer and charge collection layers and delivered a champion power conversion efficiency of 18.3% with a stabilized output efficiency of 17.6% at the maximum power point. The optimized devices also exhibited negligible current density–voltage (J–V) hysteresis under the scanning conditions.     

Retarding Thermal Degradation in Hybrid Perovskites by Ionic Liquid Additives

Recent years have witnessed considerable progress in the development of solar cells based on lead halide perovskite materials. However, their intrinsic instability remains a limitation. In this context, the interplay between the thermal degradation and the hydrophobicity of perovskite materials is investigated. To this end, the salt 1‐(4‐ethenylbenzyl)‐3‐(3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctylimidazolium iodide (ETI), is employed as an additive in hybrid perovskites, endowing the photoactive materials with high thermal stability and hydrophobicity. The ETI additive inhibits methylammonium (MA) permeation in methylammonium lead triiodide (MAPbI₃) occurring due to intrinsic thermal degradation, by inhibiting out‐diffusion of the MA⁺ cation, preserving the pristine material and preventing decomposition. With this simple approach, high efficiency solar cells based on the unstable MAPbI₃ perovskite are markedly stabilized under maximum power point tracking, leading to greater than twice the preserved efficiency after 700 h of continuous light illumination and heating (60 °C). These results suggest a strategy to tackle the intrinsic thermal decomposition of MAI, an essential component in all state‐of‐the‐art perovskite compositions.     

Octadecylamine‐Functionalized Single‐Walled Carbon Nanotubes for Facilitating the Formation of a Monolithic Perovskite Layer and Stable Solar Cells

Organic–inorganic lead halide perovskites have shown great future for application in solar cells owing to their exceptional optical and electronic properties. To achieve high‐performance perovskite solar cells, a perovskite light absorbing layer with large grains is desirable in order to minimize grain boundaries and recombination during the operation of the device. Herein, a simple yet efficient approach is developed to synthesize perovskite films consisting of monolithic‐like grains with micrometer size through in situ deposition of octadecylamine functionalized single‐walled carbon nanotubes (ODA‐SWCNTs) onto the surface of the perovskite layer. The ODA‐SWCNTs form a capping layer that controls the evaporation rate of organic solvents in the perovskite film during the postthermal treatment. This favorable morphology in turn dramatically enhances the short‐circuit current density of the perovskite solar cells and almost completely eliminates the hysteresis. A maximum power conversion efficiency of 16.1% is achieved with an ODA‐SWCNT incorporated planar solar cell using (FA_0.83MA_0.17)_0.95Cs_0.05Pb(I_0.83Br_0.17)₃ as light absorber. Furthermore, the perovskite solar cells with ODA‐SWCNT demonstrate extraordinary stability with performance retention of 80% after 45 d stability testing under high humidity (60–90%) environment. This work opens up a new avenue for morphology manipulation of perovskite films and enhances the device stability using carbon material.     

Chemical Reduction of Iodine Impurities and Defects with Potassium Formate for Efficient and Stable Perovskite Solar Cells

The performance of perovskite solar cells (PSCs) is negatively affected by iodine (I₂) impurities generated from the oxidation of iodide ions in the perovskite precursor powder, solution, and perovskite films. In this study, the use of potassium formate (HCOOK) as a reductant to minimize the presence of detrimental I₂ impurities is presented. It is demonstrated that HCOOK can effectively reduce I₂ back to I⁻ in the precursor solution as well as in the devices under external conditions. Furthermore, the introduced formate anion (HCOO⁻) and alkali metal cation (K⁺) can reduce the defect density within the perovskite film by modulating perovskite growth and passivating electronic defects, significantly prolonging the carrier lifetime and reducing the J–V hysteresis. Consequently, the maximum efficiency of the HCOOK-doped planar n–i–p PSCs reaches 23.8%. After 1000 h of operation at maximum power point tracking under continuous 1 sun illumination, the corresponding encapsulated devices retain 94% of their initial efficiency.     

Low-Dimensional 2-thiopheneethylammonium Lead Halide Capping Layer Enables Efficient Single-Junction Methylamine-Free Wide-Bandgap and Tandem Perovskite Solar Cells

Wide-bandgap (WBG) perovskite solar cells (PSCs) have garnered significant attention for their potential applications in tandem solar cells. However, their large open-circuit voltage (V_OC) deficit and serious photo-induced halide segregation remain the main challenges that impede their applications. Herein, a post-treatment strategy without thermal annealing is presented to form a 2D top layer of 2-thiopheneethylammonium lead halide (n = 1) on WBG perovskites. This thermal annealing-free post-treatment method can more effectively passivate the defects of WBG methylamine (MA)-free formamidinium/cesium lead iodide/bromide perovskite films and suppress photo-induced perovskite phase segregation, as compared with the thermal annealing method that yields multi-2D phases. The resulting opaque and semi-transparent 1.66 eV-bandgap perovskite solar cells deliver maximum power conversion efficiencies of 21.47% (a small V_OC deficit of 0.43 V) and 19.11%, respectively, both of which are among the highest reports for inverted MA-free WBG PSCs. Consequently, four-terminal all-perovskite tandem cells realize a remarkable efficiency of 26.64%, showing great promise for their applications in efficient multi-junction tandem solar cells.     

Low temperature fabrication of formamidinium based perovskite solar cells with enhanced performance by chlorine incorporation

Recently formamidinium (FA) based perovskite solar cell was demonstrated to show high performance and better stability upon partial substitution of FA with Cs cation. However, the fabrication of device required high-temperature processing on TiO₂ electrode and thus limits the use of flexible polymeric substrates. Here, we present a low temperature approach for the fabrication of p-i-n perovskite solar cells based on Cs_0.15FA_0.85PbI₃. Furthermore, we investigated the effects of chlorine on the morphology and crystallinity of the perovskite films and the corresponding photovoltaic performance. Chlorine incorporation can significantly enlarge the size of grains and improve the crystallinity of perovskite films with full surface coverage. A best power conversion efficiency of 14.5% was realized for planar perovskite solar cells with negligible hysteresis and remarkable reproducibility.     

Pre-buried Interface Strategy for Stable Inverted Perovskite Solar Cells Based on Ordered Nucleation Crystallization

The buried interface has important effect on carrier extraction and nonradiative recombination of perovksite solar cells (PSCs). Herein, to inactivate the buried interfacial defects of perovskite and boost the crystallization quality of perovskite film, 3-amino-1-adamantanol (AAD) serves as a pre-buried interface modifier on nickel oxide (NiO_x) surface to regulate the nucleation and crystallization process of perovskite precursor. The amino and hydroxyl groups in AAD molecule can synchronously coordinate with nickel ion (Ni³⁺) in NiO_x and lead ion in perovskite, respectively. The dual action favors the ordered arrangement of AAD molecules between NiO_x and perovskite, which not only enhances hole extraction in hole transport layer, but also provides active sites for homogeneous nucleation. Furthermore, AAD modifier blocks the unfavorable reaction between Ni³⁺ and perovskite, and effectively passivates the buried interfacial defects. The optimal inverted PSCs achieve a champion power conversion efficiency of 22.21% with negligible hysteresis, favorable thermal, optical, and long-term stability. Thus, this strategy of modulating perovskite nucleation and crystallization by pre-buried modifier is feasible for achieving efficient and stable inverted perovskite solar cells.     

Blade-Coated Carbon Electrode Perovskite Solar Cells to Exceed 20% Efficiency Through Protective Buffer Layers

Perovskite solar cells with carbon electrode have a commercial impact because of their facile scalability, low-cost, and stability. In these devices, it remains a challenge to design an efficient hole transport layer (HTL) for robust interfacing with perovskite on one side and carbon on another. Herein, an organic/inorganic double planar HTL is constructed based on polythiophene (P3HT) and nickel oxide (NiOx) nanoparticles to address the named challenge. Through adding an alkyl ammonium bromide (CTAB) modified NiOx nanoparticle layer on P3HT, the planar HTL achieves a cascade type-II energy level alignment at the perovskite/HTL interfaces and a preferential ohmic contact at NiOx/carbon electrode, which greatly benefits in charge collection while suppressing charge transfer recombination. Besides, compared with the single P3HT layer, the planar composite enables a robust interfacial contact by protecting perovskite from being corroded by carbon paste during fabrication. As a result, the blade-coated FA_0.6MA_0.4PbI₃ perovskite solar cells (fabricated in ambient air in fume hood) with carbon electrode deliver an efficiency of 20.14%, the highest value for bladed coated carbon and perovskite solar cells, and withstand 275 h maximum power point tracking in air without encapsulation (95% efficiency retained).     

Highly-Stable CsPbI3 Perovskite Solar Cells with an Efficiency of 21.11% via Fluorinated 4-Amino-Benzoate Cesium Bifacial Passivation

The poor interface quality between cesium lead triiodide (CsPbI₃) perovskite and the electron transport layer limits the stability and efficiency of CsPbI₃ perovskite solar cells (PSCs). Herein, a 4-amino-2,3,5,6-tetrafluorobenzoate cesium (ATFC) is designed as a bifacial defect passivator to tailor the perovskite/TiO₂ interface. The comprehensive experiments demonstrate that ATFC can not only optimize the conductivity, electron mobility, and energy band structure of the TiO₂ layer by passivation of the undercoordinated Ti⁴⁺, oxygen vacancy (V_O), and free  OH defects but also promote the yield of high-quality CsPbI₃ film by synergistic passivation of undercoordinated Pb²⁺ defects with the  CO group and F atom, and limiting I⁻ migration via F···I interaction. Benefiting from the above interactions, the ATFC-modified CsPbI₃ device yields a champion power conversion efficiency (PCE) of 21.11% and an excellent open-circuit voltage (V_OC) of 1.24 V. Meanwhile, the optimized CsPbI₃ PSC maintains 92.74% of its initial efficiency after aging 800 h in air atmosphere, and has almost no efficiency attenuation after tracking at maximum power point for 350 h.     

Donor–π–Acceptor Type Porphyrin Derivatives Assisted Defect Passivation for Efficient Hybrid Perovskite Solar Cells

In recent years, hybrid perovskite solar cells (PSCs) have attracted much attention owing to their low cost, easy fabrication, and high photoelectric conversion efficiency. Nevertheless, solution-processed perovskite films usually show substantial structural disorders, resulting in ion defects on the surface of lattice and grain boundaries. Herein, a series of D–π–A porphyrins coded as CS0 , CS1 , and CS2 that can effectively passivate the perovskite surface, increase V_OC and FF, reduce the hysteresis effect, enhance power conversion efficiency to be higher than 22%, and improve the device stability is developed. The results in this study demonstrated that the donor–π–acceptor type porphyrin derivatives are promising passivators that can improve the cell performance of PSCs.     

Composition Engineering of All‐Inorganic Perovskite Film for Efficient and Operationally Stable Solar Cells

Cesium‐based inorganic perovskites have recently attracted great research focus due to their excellent optoelectronic properties and thermal stability. However, the operational instability of all‐inorganic perovskites is still a main hindrance for the commercialization. Herein, a facile approach is reported to simultaneously enhance both the efficiency and long‐term stability for all‐inorganic CsPbI_2.5Br_0.5 perovskite solar cells via inducing excess lead iodide (PbI₂) into the precursors. Comprehensive film and device characterizations are conducted to study the influences of excess PbI₂ on the crystal quality, passivation effect, charge dynamics, and photovoltaic performance. It is found that excess PbI₂ improves the crystallization process, producing high‐quality CsPbI_2.5Br_0.5 films with enlarged grain sizes, enhanced crystal orientation, and unchanged phase composition. The residual PbI₂ at the grain boundaries also provides a passivation effect, which improves the optoelectronic properties and charge collection property in optimized devices, leading to a power conversion efficiency up to 17.1% with a high open‐circuit voltage of 1.25 V. More importantly, a remarkable long‐term operational stability is also achieved for the optimized CsPbI_2.5Br_0.5 solar cells, with less than 24% degradation drop at the maximum power point under continuous illumination for 420 h.     

TiO2表面预处理对钙钛矿太阳电池性能的影响

采用一步法制作了基于 n-i-p结构的钙钛矿太阳电池。为了提高钙钛矿活性层以及TiO₂与钙钛矿活性层接触面的质量,用 MAI、MABr和PbI₂溶液对TiO₂层进行预处理,研究了预处理对电池性能的影响。结果显示对TiO₂进行预处理能够改善钙钛矿活性层薄膜的质量并提升钙钛矿太阳电池的性能。通过溶液预处理,太阳电池的能量转换效率和器件稳定性有显著提高,同时滞后效应明显减弱。     

Highly Efficient 1D/3D Ferroelectric Perovskite Solar Cell

With the capability to manipulate the built-in field in solar cells, ferroelectricity is found to be a promising attribute for harvesting solar energy in solar cell devices by influencing associated device parameters. Researchers have devoted themselves to the exploration of ferroelectric materials that simultaneously possess strong light absorption and good electric transport properties for a long time. Here, it is presented a novel and facile approach of combining state-of-art light absorption and electric transport properties with ferroelectricity by the incorporation of room temperature 1D ferroelectric perovskite with 3D organic–inorganic hybrid perovskite (OIHP). The 1D/3D mixed OIHP films are found to exhibit evident ferroelectric properties. It is notable that the poling of the 1D/3D mixed ferroelectric OIHP solar cell can increase the average V_oc can be increased from 1.13 to 1.16 V, the average PCE from 20.7% to 21.5%. A maximum power conversion efficiency of 22.7%, along with an enhanced fill factor of over 80% and open-circuit voltage of 1.19 V, can be achieved in the champion device. The enhancement is by virtue of reduced surface recombination by ferroelectricity-induced modification of the built-in field. The maximum power point tracking measurement substantiates the retention of ferroelectric-polarization during the continued operation.     

Boosting the performance and stability of perovskite solar cells with phthalocyanine-based dopant-free hole transporting materials through core metal and peripheral groups engineering

Three novel dopant-free hole-transporting materials (HTMs) based on phthalocyanine core containing (4-methyl formate) phenoxy or (4-butyl formate) phenoxy as the peripheral groups with cupper or zinc as the core metals (CuPcNO₂-OMFPh, CuPcNO₂-OBFPh, ZnPcNO₂-OBFPh) were designed and synthesized. All of the phthalocyanine complexes show excellent thermal stabilities, appropriate energy levels and suitable hole mobilities. The potential of three HTMs were tested in perovskite solar cells (PSCs) and ZnPcNO₂-OBFPh based PSC obtained power conversion efficiency (PCE) of 15.74% under 100 mA cm⁻² standard AM 1.5G solar illumination. Most important of all, PSC based on ZnPcNO₂-OBFPh shows better stability than that of the other two phthalocyanines and Spiro-OMeTAD under continuous light irradiation at 60 °C and maximum power point tracking in ambient air without encapsulation after 500 h. The results show that the introduction of appropriate peripheral groups and core metals can improve the performance and stability of PSCs dramatically, which provides an alternative way to develop HTMs for efficient and stable PSCs.     

δ‐CsPbI3 Intermediate Phase Growth Assisted Sequential Deposition Boosts Stable and High‐Efficiency Triple Cation Perovskite Solar Cells

Cs/FA/MA triple cation perovskite films have been well developed in the antisolvent dripping method, attributable to its outstanding photovoltaic and stability performances. However, a facile and effective strategy is still lacking for fabricating high‐quality large‐grain triple cation perovskite films via sequential deposition method a, which is one of the key technologies for high efficiency perovskite solar cells. To address this issue, a δ‐CsPbI₃ intermediate phase growth (CsPbI₃‐IPG) assisted sequential deposition method is demonstrated for the first time. The approach not only achieves incorporation of controllable cesium into (FAPbI₃)_1–x(MAPbBr₃)_x perovskite, but also enlarges the perovskite grains, manipulates the crystallization, modulates the bandgap, and improves the stability of final perovskite films. The photovoltaic performances of the devices based on these Cs/FA/MA perovskite films with various amounts of the δ‐CsPbI₃ intermediate phase are investigated systematically. Benefiting from moderate cesium incorporation and intermediate phase‐assisted grain growth, the optimized Cs/FA/MA perovskite solar cells exhibit a significantly improved power conversion efficiency and operational stability of unencapsulated devices. This facile strategy provides new insights into the compositional engineering of triple or quadruple cation perovskite materials with enlarged grains and superior stability via a sequential deposition method.     

Controllable Perovskite Crystallization by Water Additive for High‐Performance Solar Cells

A key issue for perovskite solar cells is the stability of perovskite materials due to moisture effects under ambient conditions, although their efficiency is improved constantly. Herein, an improved CH₃NH₃PbI_3?xCl_x perovskite quality is demonstrated with good crystallization and stability by using water as an additive during crystal perovskite growth. Incorporating suitable water additives in N,N‐dimethylformamide (DMF) leads to controllable growth of perovskites due to the lower boiling point and the higher vapor pressure of water compared with DMF. In addition, CH₃NH₃PbI_3?xCl_x · nH₂O hydrated perovskites, which can be resistant to the corrosion by water molecules to some extent, are assumed to be generated during the annealing process. Accordingly, water additive based perovskite solar cells present a high power conversion efficiency of 16.06% and improved cell stability under ambient conditions compared with the references. The findings in this work provide a route to control the growth of crystal perovskites and a clue to improve the stability of organic–inorganic halide perovskites.     

Epitaxial 2D PbS Nanosheet-Formamidinium Lead Triiodide Heterostructure Enabling High-Performance Perovskite Solar Cells

Nanomaterials such as quantum dots and 2D materials have been widely used to improve the performance of perovskite solar cells due to their favorable optical properties, conductivity, and stability. Nevertheless, the interfacial crystal structures between perovskites and nanomaterials have always been ignored while large mismatches can result in a significant number of defects within solar cells. In this work, cubic PbS nanosheets with (200) preferred crystal planes are synthesized through anisotropy growth. Based on the similar crystal structure between cubic PbS (200) and cubic-phase formamidinium lead triiodide (α-FAPbI₃) (200), a nanoepitaxial PbS nanosheets-FAPbI₃ heterostructure with low defect density is observed. Attribute to the epitaxial growth, PbS nanosheets-FAPbI₃ hybrid polycrystalline films show decreased defects and better crystallization. Optimized perovskite solar cells perform both improved efficiency and stability, retaining 90% of initial photovoltaic conversion efficiency after being stored at 20 °C and 20% RH for 2500 h. Notably, the significantly improved stability is ascribed to the interfacial compression strain and chemical bonding between (200) planes of PbS nanosheets and α-FAPbI₃ (200). This study provides insight into high-performance perovskite solar cells achieved by manipulating nanomaterial surfaces.     

Native Defect‐Induced Hysteresis Behavior in Organolead Iodide Perovskite Solar Cells

Despite the high power conversion efficiency and ease of fabrication, planar‐junction organolead halide perovskite solar cells often exhibit anomalous hysteretic current–voltage (I–V) characteristics. In this work, the origin of the I–V hysteresis is studied by fine‐tuning the precursor ratio of methylammonium lead iodide and thus varying the native defects in the material. It is shown that the perovskites synthesized from “PbI₂ excess,” “methylammonium iodide excess,” and “stoichiometric” precursors exhibit identical film morphology but different I–V hysteresis in a planar solar cell configuration. Through a comparative analysis on the temperature‐dependent continuous and stepwise‐stabilized I–V responses of the three devices, a model involving transport and trapping of the ionic native defects is proposed. The active energy of the transport process is estimated to be between 0.10 and 0.18 eV, most likely associated with the vacancy‐mediated iodide ion migration. The lower activation energy of the “PbI₂ excess” and “Stoichiometric” samples indicates that the presence of methylammonium vacancies may provide a favorable pathway for the migration of iodide ions due to reduced steric hindrance. Furthermore, the slow trapping and release processes of iodide ions at the TiO₂/perovskite interface are accounted for the long time scale current decay (or raise) following a voltage change.     

A Self‐Powered and Stable All‐Perovskite Photodetector–Solar Cell Nanosystem

Hybrid organic–inorganic perovskites have attracted intensive interest as light absorbing materials in solid‐state solar cells. Herein, we demonstrate a high‐performance CH₃NH₃PbI₃‐based perovskite photodetector constructed on the flexible indium tin oxide (ITO) coated substrate even after 200 bending cycles. The as‐fabricated devices show high responsivity, broad spectrum response from ultraviolet to whole visible light, long‐term stability, and high on‐off ratio. Particularly, atomic layer deposition technique was used to deposit the ultrathin Al₂O₃ film on devices, functioning as a protection layer to effectively enhance the stability and durability of perovskite photodetectors. The first all‐perovskite self‐powered nanosystem was successfully assembled by integrating a perovskite solar cell with a perovskite photodetector. Driven by the perovskite solar cell, the photodetector exhibits fast and stable response to illuminated light at a low working voltage less than 1.0 V. This stable integrated nanosystem has promising applications in which photodetectors can work in harsh environments without external power sources.     

Effects of a Molecular Monolayer Modification of NiO Nanocrystal Layer Surfaces on Perovskite Crystallization and Interface Contact toward Faster Hole Extraction and Higher Photovoltaic Performance

NiO is a promising hole transporting material for perovskite solar cells due to its high hole mobility, good stability, easy processibility, and suitable Fermi level for hole extraction. However, the efficiency of NiO‐based cells is still limited by the slow hole extraction due to the poor perovskite/NiO interface and the inadequate quality of the two solution‐processed material phases. Here, large influences of a monolayer surface modification of NiO nanocrystal layers with ethanolamine molecules are demonstrated on the enhancement of hole extraction/transport and thus the photovoltaic performance. The underlying causes have been revealed by a series of studies, pointing to a favorable dipole layer formed by the molecular adsorption along with the enhanced perovskite crystallization and the improved interface contact. Comparatively, the solar cells based on a diethanolamine‐modified NiO layer have achieved a rather high fill factor, indeed one of the highest among NiO‐based perovskite solar cells, and high short‐circuit photocurrent density (J_sc), resulting in a power conversion efficiency of ≈16%, most importantly, without hysteresis.