Efficient Organic Solar Cells with Non‐Fullerene Acceptors

Fullerene‐free OSCs employing n‐type small molecules or polymers as the acceptors have recently experienced a rapid rise with efficiencies exceeding 12%. Owing to the good optoelectronic and morphological tunabilities, non‐fullerene acceptors exhibit great potential for realizing high‐performance and practical OSCs. In this Review, recent exciting progress made in developing highly efficient non‐fullerene acceptors is summarized, mainly correlating factors like absorption, energy loss and morphology of new materials to their correspondent photovoltaic performance.     

Photovoltaic contribution of photo-generated excitons in acceptor material of organic solar cells

Contribution of exciton generation in acceptor material to the photovoltaic performance of three bulk-heterojunction organic solar cells (BHJ OSCs), PTB7:PC₇₁BM, P3HT:ICBA and P3HT:PC₆₁BM are studied. Singlet and triplet rates of absorption and dissociation and diffusion lengths are calculated and compared with those when excitons are generated in the donor of these BHJ OSCs. It is found that the rates of absorption and dissociation and diffusion lengths are comparable whether excitons are generated in donor or acceptor of these BHJ OSCs. Therefore, it is proposed that the contribution of exciton generation in acceptor may not be negligible.     

Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors

As the power conversion efficiency (PCE) of organic solar cells (OSCs) has surpassed the 17% baseline, the long-term stability of highly efficient OSCs is essential for the practical application of this photovoltaic technology. Here, the photostability and possible degradation mechanisms of three state-of-the-art polymer donors with a commonly used nonfullerene acceptor (NFA), IT-4F, are investigated. The active-layer materials show excellent intrinsic photostability. The initial morphology, in particular the mixed region, causes degradation predominantly in the fill factor (FF) under illumination. Electron traps are formed due to the reorganization of polymers and diffusion-limited aggregation of NFAs to assemble small isolated acceptor domains under illumination. These electron traps lead to losses mainly in FF, which is in contradistinction to the degradation mechanisms observed for fullerene-based OSCs. Control of the composition of NFAs close to the thermodynamic equilibrium limit while keeping adequate electron percolation and improving the initial polymer and NFA ordering are of the essence to stabilize the FF in NFA-based solar cells, which may be the key tactics to develop next-generation OSCs with high efficiency as well as excellent stability.     

A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer

With rapid development for tens of years, organic solar cells (OSCs) have attracted much attention for their potential in practical applications. As an important photovoltaic parameter, the fill factor (FF) of OSCs stands for the effectiveness of charge generation and collection, which significantly depends on the properties of the interlayer and active layer. Here, a facile and effective strategy to improve the FF through hole‐transporting layer (HTL) modification is demonstrated. By mixing WO_x nanoparticles with a poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) emulsion, the surface free energy of the HTL is improved and the morphology of the active layer is optimized. Benefiting from increased carrier lifetime, a device based on WO_x:PEDOT:PSS HTL exhibits a boosted performance with an FF of 80.79% and power conversion efficiency of 14.57% PCE. The results are certified by the National Institute of Metrology (NIM), which, to date, are the highest values in this field with certification. This work offers a simple and viable option of HTL modification to realize highly efficient OSCs.     

A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells

The blossoming of organic solar cells (OSCs) has triggered enormous commercial applications, due to their high‐efficiency, light weight, and flexibility. However, the lab‐to‐manufacturing translation of the praisable performance from lab‐scale devices to industrial‐scale modules is still the Achilles' heel of OSCs. In fact, it is urgent to explore the mechanism of morphological evolution in the bulk heterojunction (BHJ) with different coating/printing methods. Here, a general approach to upscale flexible organic photovoltaics to module scale without obvious efficiency loss is demonstrated. The shear impulse during the coating/printing process is first applied to control the morphology evolution of the BHJ layer for both fullerene and nonfullerene acceptor systems. A quantitative transformation factor of shear impulse between slot‐die printing and spin‐coating is detected. Compelling results of morphological evolution, molecular stacking, and coarse‐grained molecular simulation verify the validity of the impulse translation. Accordingly, the efficiency of flexible devices via slot‐die printing achieves 9.10% for PTB7‐Th:PC₇₁BM and 9.77% for PBDB‐T:ITIC based on 1.04 cm² . Furthermore, 15 cm² flexible modules with effective efficiency up to 7.58% (PTB7‐Th:PC₇₁BM) and 8.90% (PBDB‐T:ITIC) are demonstrated with satisfying mechanical flexibility and operating stability. More importantly, this work outlines the shear impulse translation for organic printing electronics.     

Design of a New Small‐Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor

Improving the fill factor (FF) is known as a challenging issue in organic solar cells (OSCs). Herein, a strategy of extending the conjugated area of end‐group is proposed for the molecular design of acceptor–donor–acceptor (A–D–A)‐type small molecule acceptor (SMA), and an indaceno[1,2‐b:5,6‐b′]dithiophene‐based SMA, namely IDTN, by end‐capping with the naphthyl fused 2‐(3‐oxocyclopentylidene)malononitrile is synthesized. Benefiting from the π‐conjugation extension by fusing two phenyls, IDTN shows stronger molecular aggregation, more ordered packing structure, thus over one order of magnitude higher electron mobility relative to its counterpart. By utilizing the fluorinated polymer (PBDB‐TF) as the electron donor, the corresponding device exhibits a high efficiency of 12.2% with a record‐high FF of 0.78, which is approaching the theoretical limit of OSCs. Compared with the reference molecule, such a high FF in the IDTN system can be mainly attributed to the more ordered π–π packing of acceptor aggregates, higher domain purity and symmetric carrier transport in the blend. Hence, enlarging the conjugated area of the terminal‐group in these A–D–A‐type SMAs is a promising approach not only for enhancing the electron mobility, but also for improving the blend morphology, and both of them are conducive to the fill‐factor breakthrough.     

High‐Performance Organic Bulk‐Heterojunction Solar Cells Based on Multiple‐Donor or Multiple‐Acceptor Components

Organic solar cells (OSCs) based on bulk heterojunction structures are promising candidates for next‐generation solar cells. However, the narrow absorption bandwidth of organic semiconductors is a critical issue resulting in insufficient usage of the energy from the solar spectrum, and as a result, it hinders performance. Devices based on multiple‐donor or multiple‐acceptor components with complementary absorption spectra provide a solution to address this issue. OSCs based on multiple‐donor or multiple‐acceptor systems have achieved power conversion efficiencies over 12%. Moreover, the introduction of an additional component can further facilitate charge transfer and reduce charge recombination through cascade energy structure and optimized morphology. This progress report provides an overview of the recent progress in OSCs based on multiple‐donor (polymer/polymer, polymer/dye, and polymer/small molecule) or multiple‐acceptor (fullerene/fullerene, fullerene/nonfullerene, and nonfullerene/nonfullerene) components.     

Recent Advances in Wide‐Bandgap Photovoltaic Polymers

The past decade has witnessed significant advances in the field of organic solar cells (OSCs). Ongoing improvements in the power conversion efficiency of OSCs have been achieved, which were mainly attributed to the design and synthesis of novel conjugated polymers with different architectures and functional moieties. Among various conjugated polymers, the development of wide‐bandgap (WBG) polymers has received less attention than that of low‐bandgap and medium‐bandgap polymers. Here, we briefly summarize recent advances in WBG polymers and their applications in organic photovoltaic (PV) devices, such as tandem, ternary, and non‐fullerene solar cells. Addtionally, we also dissuss the application of high open‐circuit voltage tandem solar cells in PV‐driven electrochemical water dissociation. We mainly focus on the molecular design strategies, the structure‐property correlations, and the photovoltaic performance of these WBG polymers. Finally, we extract empirical regularities and provide invigorating perspectives on the future development of WBG photovoltaic materials.     

Regulating Bulk‐Heterojunction Molecular Orientations through Surface Free Energy Control of Hole‐Transporting Layers for High‐Performance Organic Solar Cells

Interface properties are of critical importance for high‐performance bulk‐heterojunction (BHJ) organic solar cells (OSCs). Here, a universal interface approach to tune the surface free energy (γ_S) of hole‐transporting layers (HTLs) in a wide range through introducing poly(styrene sulfonic acid) sodium salts or nickel formate dihydrate into poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is reported. Based on the optimal γ_S of HTLs and thus improved face‐on molecular ordering in BHJs, enhanced fill factor and power conversion efficiencies in both fullerene and nonfullerene OSCs are achieved, which is attributed to the increased charge carrier mobility and sweepout with reduced recombination. It is found that the face‐on orientation‐preferred BHJs (PBDB‐TF:PC₇₁BM, PBDB‐T:PC₇₁BM, and PBDB‐TF:IT‐4F) favor HTLs with higher γ_S while the edge‐on orientation‐preferred BHJs (PDCDT:PC₇₁BM, P3HT:PC₇₁BM and PDCBT:ITIC) are partial to HTLs with lower γ_S. Based on the surface property–morphology–device performance correlations, a suggestion to select a suitable HTL in terms of γ_S for a specific BHJ with favored molecular arrangement is provided. This work enriches the fundamental understandings on the interface characteristics and morphological control toward high‐efficiency OSCs based on a wide range of BHJ materials.     

Organic Photovoltaics with Multiple Donor–Acceptor Pairs

Compared with conventional organic solar cells (OSCs) based on single donor–acceptor pairs, terpolymer‐ and ternary‐based OSCs featuring multiple donor–acceptor pairs are promising strategies for enhancing the performance while maintaining an easy and simple synthetic process. Using multiple donor–acceptor pairs in the active layer, the key photovoltaic parameters (i.e., short‐circuit current density, open‐circuit voltage, and fill factor) governing the OSC characteristics can be simultaneously or individually improved by positive changes in light‐harvesting ability, molecular energy levels, and blend morphology. Here, these three major contributions are discussed with the aim of offering in‐depth insights in combined terpolymers and ternary systems. Recent exemplary cases of OSCs with multiple donor–acceptor pairs are summarized and more advanced research and perspectives for further developments in this field are highlighted.     

Conformation‐Tuning Effect of Asymmetric Small Molecule Acceptors on Molecular Packing,Interaction, and Photovoltaic Performance

Understanding the conformation effect on molecular packing, miscibility, and photovoltaic performance is important to open a new avenue for small‐molecule acceptor (SMA) design. Herein, two novel acceptor–(donor‐acceptor1‐donor)–acceptor (A‐DA1D‐A)‐type asymmetric SMAs are developed, namely C‐shaped BDTP‐4F and S‐shaped BTDTP‐4F . The BDTP‐4F ‐based polymer solar cells (PSCs) with PM6 as donor, yields a power conversion efficiency (PCE) of 15.24%, significantly higher than that of the BTDTP‐4F ‐based device (13.12%). The better PCE for BDTP‐4F ‐based device is mainly attributed to more balanced charge transport, weaker bimolecular recombination, and more favorable morphology. Additionally, two traditional A‐D‐A‐type SMAs ( IDTP‐4F and IDTTP‐4F ) are also synthesized to investigate the conformation effect on morphology and device performance. Different from the device result above, here, IDTP‐4F with S‐shape conformation outperforms than IDTTP‐4F with C‐shape conformation. Importantly, it is found that for these two different types of SMA, the better performing binary blend has similar morphological characteristics. Specifically, both PM6:BDTP‐4F and PM6:IDTP‐4F blend exhibit perfect nanofibril network structure with proper domain size, obvious face‐on orientation and enhance donor‐acceptor interactions, thereby better device performance. This work indicates tuning molecular conformation plays pivotal role in morphology and device effciciency, shining a light on the molecular design of the SMAs.     

Morphology Control Enables Efficient Ternary Organic Solar Cells

Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide‐bandgap polymer PBT1‐C as the donor, a crystalline fused‐ring electron acceptor ITIC‐2Cl, and an amorphous fullerene derivative indene‐C₆₀ bisadduct (ICBA) as the acceptor. It is found that ICBA can disturb π–π interactions of the crystalline ITIC‐2Cl molecules in ternary blends and then help to form more uniform morphology. As a result, incorporation of 20% ICBA in the PBT1‐C:ITIC‐2Cl blend enables efficient charge dissociation, negligible bimolecular recombination, and balanced charge carrier mobilities. An impressive power conversion efficiency (PCE) of 13.4%, with a high fill factor (FF) of 76.8%, is eventually achieved, which represents one of the highest PCEs reported so far for organic solar cells. The results manifest that the adoption of amorphous fullerene acceptor is an effective approach to optimizing the ternary blend morphology and thereby increases the solar cell performance.     

Subtle Molecular Tailoring Induces Significant Morphology Optimization Enabling over 16% Efficiency Organic Solar Cells with Efficient Charge Generation

Manipulating charge generation in a broad spectral region has proved to be crucial for nonfullerene-electron-acceptor-based organic solar cells (OSCs). 16.64% high efficiency binary OSCs are achieved through the use of a novel electron acceptor AQx-2 with quinoxaline-containing fused core and PBDB-TF as donor. The significant increase in photovoltaic performance of AQx-2 based devices is obtained merely by a subtle tailoring in molecular structure of its analogue AQx-1. Combining the detailed morphology and transient absorption spectroscopy analyses, a good structure–morphology–property relationship is established. The stronger π–π interaction results in efficient electron hopping and balanced electron and hole mobilities attributed to good charge transport. Moreover, the reduced phase separation morphology of AQx-2-based bulk heterojunction blend boosts hole transfer and suppresses geminate recombination. Such success in molecule design and precise morphology optimization may lead to next-generation high-performance OSCs.     

Understanding the High Performance of over 15% Efficiency in Single‐Junction Bulk Heterojunction Organic Solar Cells

The highly efficient single‐junction bulk‐heterojunction (BHJ) PM6:Y6 system can achieve high open‐circuit voltages (V_OC) while maintaining exceptional fill‐factor (FF) and short‐circuit current (J_SC) values. With a low energetic offset, the blend system is found to exhibit radiative and non‐radiative recombination losses that are among the lower reported values in the literature. Recombination and extraction dynamic studies reveal that the device shows moderate non‐geminate recombination coupled with exceptional extraction throughout the relevant operating conditions. Several surface and bulk characterization techniques are employed to understand the phase separation, long‐range ordering, as well as donor:acceptor (D:A) inter‐ and intramolecular interactions at an atomic‐level resolution. This is achieved using photo‐conductive atomic force microscopy, grazing‐incidence wide‐angle X‐ray scattering, and solid‐state ¹⁹F magic‐angle‐spinning NMR spectroscopy. The synergy of multifaceted characterization and device physics is used to uncover key insights, for the first time, on the structure–property relationships of this high‐performing BHJ blend. Detailed information about atomically resolved D:A interactions and packing reveals that the high performance of over 15% efficiency in this blend can be correlated to a beneficial morphology that allows high J_SC and FF to be retained despite the low energetic offset.     

High‐Performance Long‐Term‐Stable Dopant‐Free Perovskite Solar Cells and Additive‐Free Organic Solar Cells by Employing Newly Designed Multirole π‐Conjugated Polymers

Perovskite solar cells (PSCs) and organic solar cells (OSCs) are promising renewable light‐harvesting technologies with high performance, but the utilization of hazardous dopants and high boiling additives is harmful to all forms of life and the environment. Herein, new multirole π‐conjugated polymers (P1–P3) are developed via a rational design approach through theoretical hindsight, further successfully subjecting them into dopant‐free PSCs as hole‐transporting materials and additive‐free OSCs as photoactive donors, respectively. Especially, P3‐based PSCs and OSCs not only show high power conversion efficiencies of 17.28% and 8.26%, but also display an excellent ambient stability up to 30 d (for PSCs only), owing to their inherent superior optoelectronic properties in their pristine form. Overall, the rational approach promises to support the development of environmentally and economically sustainable PSCs and OSCs.     

Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors

To make organic solar cells (OSCs) more competitive in the diverse photovoltaic cell technologies, it is very important to demonstrate that OSCs can achieve very good efficiencies and that their cost can be reduced. Here, a pair of nonfullerene small‐molecule acceptors, IT‐2Cl and IT‐4Cl, is designed and synthesized by introducing easy‐synthesis chlorine substituents onto the indacenodithieno[3,2‐b]thiophene units. The unique feature of the large dipole moment of the C? Cl bond enhances the intermolecular charge‐transfer effect between the donor–acceptor structures, and thus expands the absorption and down shifts the molecular energy levels. Meanwhile, the introduction of C? Cl also causes more pronounced molecular stacking, which also helps to expand the absorption spectrum. Both of the designed OSCs devices based on two acceptors can deliver a power conversion efficiency (PCE) greater than 13% when blended with a polymer donor with a low‐lying highest occupied molecular orbital level. In addition, since IT‐2Cl and IT‐4Cl have very good compatibility, a ternary OSC device integrating these two acceptors is also fabricated and obtains a PCE greater than 14%. Chlorination demonstrates effective ability in enhancing the device performance and facile synthesis route, which both deserve further exploitation in the modification of photovoltaic materials.     

Solution‐Processed Semitransparent Organic Photovoltaics: From Molecular Design to Device Performance

Recent research efforts on solution‐processed semitransparent organic solar cells (OSCs) are presented. Essential properties of organic donor:acceptor bulk heterojunction blends and electrode materials, required for the combination of simultaneous high power conversion efficiency (PCE) and average visible transmittance of photovoltaic devices, are presented from the materials science and device engineering points of view. Aspects of optical perception, charge generation–recombination, and extraction processes relevant for semitransparent OSCs are also discussed in detail. Furthermore, the theoretical limits of PCE for fully transparent OSCs, compared to the performance of the best reported semitransparent OSCs, and options for further optimization are discussed.     

Fused Benzothiadiazole: A Building Block for n‐Type Organic Acceptor to Achieve High‐Performance Organic Solar Cells

Narrow bandgap n‐type organic semiconductors (n‐OS) have attracted great attention in recent years as acceptors in organic solar cells (OSCs), due to their easily tuned absorption and electronic energy levels in comparison with fullerene acceptors. Herein, a new n‐OS acceptor, Y5, with an electron‐deficient‐core‐based fused structure is designed and synthesized, which exhibits a strong absorption in the 600–900 nm region with an extinction coefficient of 1.24 × 10⁵ cm^?1, and an electron mobility of 2.11 × 10^?4 cm² V^?1 s^?1. By blending Y5 with three types of common medium‐bandgap polymers (J61, PBDB‐T, and TTFQx‐T1) as donors, all devices exhibit high short‐circuit current densities over 20 mA cm^?2. As a result, the power conversion efficiency of the Y5‐based OSCs with J61, TTFQx‐T1, and PBDB‐T reaches 11.0%, 13.1%, and 14.1%, respectively. This indicates that Y5 is a universal and highly efficient n‐OS acceptor for applications in organic solar cells.     

Recent Progress in Molecular Design of Fused Ring Electron Acceptors for Organic Solar Cells

The quest for sustainable energy sources has led to accelerated growth in research of organic solar cells (OSCs). A solution‐processed bulk‐heterojunction (BHJ) OSC generally contains a donor and expensive fullerene acceptors (FAs). The last 20 years have been devoted by the OSC community to developing donor materials, specifically low bandgap polymers, to complement FAs in BHJs. The current improvement from ≈2.5% in 2013 to 17.3% in 2018 in OSC performance is primarily credited to novel nonfullerene acceptors (NFA), especially fused ring electron acceptors (FREAs). FREAs offer unique advantages over FAs, like broad absorption of solar radiation, and they can be extensively chemically manipulated to tune optoelectronic and morphological properties. Herein, the current status in FREA‐based OSCs is summarized, such as design strategies for both wide and narrow bandgap FREAs for BHJ, all‐small‐molecule OSCs, semi‐transparent OSC, ternary, and tandem solar cells. The photovoltaics parameters for FREAs are summarized and discussed. The focus is on the various FREA structures and their role in optical and morphological tuning. Besides, the advantages and drawbacks of both FAs and NFAs are discussed. Finally, an outlook in the field of FREA‐OSCs for future material design and challenges ahead is provided.     

Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels

Efficient organic solar cells (OSCs) are fabricated using polymer PM6 as donor, and IPTBO‐4Cl and MF1 as acceptors. The power conversion efficiency (PCE) of IPTBO‐4Cl based and MF1 based binary OSCs individually arrive to 14.94% and 12.07%, exhibiting markedly different short circuit current density (J_SC) of 23.18 mA cm^?2 versus 17.01 mA cm^?2, fill factor (FF) of 72.17% versus 78.18% and similar open circuit voltage (V_OC) of 0.893 V versus 0.908 V. The two acceptors, IPTBO‐4Cl and MF1, have similar lowest unoccupied molecular orbital levels, which is beneficial for efficient electron transport in the ternary active layer. The PCE of optimized ternary OSCs arrives to 15.74% by incorporating 30 wt% MF1 in acceptors, resulting from the simultaneously increased J_SC of 23.20 mA cm^?2, V_OC of 0.897 V, and FF of 75.64% in comparison with IPTBO‐4Cl based binary OSCs. The gradually increased FFs of ternary OSCs indicate the well‐optimized phase separation and molecular arrangement with MF1 as morphology regulator. This work may provide a new viewpoint for selecting an appropriate third component to achieve efficient ternary OSCs from materials and photovoltaic parameters of two binary OSCs.