High Surface‐Enhanced Raman Scattering Performance of Individual Gold Nanoflowers and Their Application in Live Cell Imaging

Molecular imaging techniques based on surface‐enhanced Raman scattering (SERS) face a lack of reproducibility and reliability, thus hampering its practical application. Flower‐like gold nanoparticles have strong SERS enhancement performance due to having plenty of hot‐spots on their surfaces, and this enhancement is not dependent on the aggregation of the particles. These features make this kind of particle an ideal SERS substrate to improve the reproducibility in SERS imaging. Here, the SERS properties of individual flower‐like gold nanoparticles are systematically investigated. The measurements reveal that the enhancement of a single gold nanoparticle is independent of the polarization of the excitation laser with an enhancement factor as high as 10⁸. After capping with Raman signal molecules and folic acid, the gold nanoflowers show strong Raman signal in the living cells, excellent targeting properties, and a high signal‐to‐noise ratio for SERS imaging.     

Split‐GFP: SERS Enhancers in Plasmonic Nanocluster Probes

The assembly of plasmonic metal nanoparticles into hot spot surface‐enhanced Raman scattering (SERS) nanocluster probes is a powerful, yet challenging approach for ultrasensitive biosensing. Scaffolding strategies based on self‐complementary peptides and proteins are of increasing interest for these assemblies, but the electronic and the photonic properties of such hybrid nanoclusters remain difficult to predict and optimize. Here, split‐green fluorescence protein (sGFP) fragments are used as molecular glue and the GFP chromophore is used as a Raman reporter to assemble a variety of gold nanoparticle (AuNP) clusters and explore their plasmonic properties by numerical modeling. It is shown that GFP seeding of plasmonic nanogaps in AuNP/GFP hybrid nanoclusters increases near‐field dipolar couplings between AuNPs and provides SERS enhancement factors above 10⁸. Among the different nanoclusters studied, AuNP/GFP chains allow near‐infrared SERS detection of the GFP chromophore imidazolinone/exocyclic C?C vibrational mode with theoretical enhancement factors of 10⁸–10⁹. For larger AuNP/GFP assemblies, the presence of non‐GFP seeded nanogaps between tightly packed nanoparticles reduces near‐field enhancements at Raman active hot spots, indicating that excessive clustering can decrease SERS amplifications. This study provides rationales to optimize the controlled assembly of hot spot SERS nanoprobes for remote biosensing using Raman reporters that act as molecular glue between plasmonic nanoparticles.     

Competitive Reaction Pathway for Site‐Selective Conjugation of Raman Dyes to Hotspots on Gold Nanorods for Greatly Enhanced SERS Performance

Common methods to prepare SERS (surface‐enhanced Raman scattering) probes rely on random conjugation of Raman dyes onto metal nanostructures, but most of the Raman dyes are not located at Raman‐intense electromagnetic hotspots thus not contributing to SERS enhancement substantially. Herein, a competitive reaction between transverse gold overgrowth and dye conjugation is described to achieve site selective conjugation of Raman dyes to the hotspots (ends) on gold nanorods (GNRs). The preferential overgrowth on the nanorod side surface creates a barrier to prevent the Raman dyes from binding to the side surface except the ends of the GNRs, where the highest SERS enhancement factors are expected. The SERS enhancement observed from this special structure is dozens of times larger than that from conjugates synthesized by conventional methods. This simple and powerful strategy to prepare SERS probes can be extended to different anisotropic metal nanostructures with electromagnetic hotspots and has immense potential in in‐depth SERS‐based biological imaging and single‐molecule detection.     

Smart‐Dust‐Nanorice for Enhancement of Endogenous Raman Signal,Contrast in Photoacoustic Imaging,and T2‐Shortening in Magnetic Resonance Imaging

Raman microspectroscopy provides chemo‐selective image contrast, sub‐micrometer resolution, and multiplexing capabilities. However, it suffers from weak signals resulting in image‐acquisition times of up to several hours. Surface‐enhanced Raman scattering (SERS) can dramatically enhance signals of molecules in close vicinity of metallic surfaces and overcome this limitation. Multimodal, SERS‐active nanoparticles are usually labeled with Raman marker molecules, limiting SERS to the coating material. In order to realize multimodal imaging while acquiring the rich endogenous vibronic information of the specimen, a core–shell particle based on “Nanorice”, where a spindle‐shaped iron oxide core is encapsulated by a closed gold shell, is developed. An ultrathin layer of silica prevents agglomeration and unwanted chemical interaction with the specimen. This approach provides Raman signal enhancement due to plasmon resonance effects of the shell while the optical absorption in the near‐infrared spectral region provides contrast in photoacoustic tomography. Finally, T2‐relaxation of a magnetic resonance imaging (MRI) experiment is altered by taking advantage of the iron oxide core. The feasibility for Raman imaging is evaluated by nearfield simulations and experimental studies on the primate cell line COS1. MRI and photoacoustics are demonstrated in agarose phantoms illustrating the promising translational nature of this strategy for clinical applications in radiology.     

Controlled Electrodeposition of Gold on Graphene: Maximization of the Defect‐Enhanced Raman Scattering Response

A reliable method to prepare a surface‐enhanced Raman scattering (SERS) active substrate is developed herein, by electrodeposition of gold nanoparticles (Au NPs) on defect‐engineered, large area chemical vapour deposition graphene (GR). A plasma treatment strategy is used in order to engineer the structural defects on the basal plane of large area single‐layer graphene. This defect‐engineered Au functionalized GR, offers reproducible SERS signals over the large area GR surface. The Raman data, along with X‐ray photoelectron spectroscopy and analysis of the water contact angle are used to rationalize the functionalization of the graphene layer. It is found that Au NPs functionalization of the “defect‐engineered” graphene substrates permits detection of concentrations as low as 10^?16 m for the probe molecule Rhodamine B, which offers an outstanding molecular sensing ability. Interestingly, a Raman signal enhancement of up to ≈10⁸ is achieved. Moreover, it is observed that GR effectively quenches the fluorescence background from the Au NPs and molecules due to the strong resonance energy transfer between Au NPs and GR. The results presented offer significant direction for the design and fabrication of ultra‐sensitive SERS platforms, and also open up possibilities for novel applications of defect engineered graphene in biosensors, catalysis, and optoelectronic devices.     

Ultrathin Molybdenum Dioxide Nanosheets as Uniform and Reusable Surface‐Enhanced Raman Spectroscopy Substrates with High Sensitivity

Metal oxides have advantages over the traditional noble metals to be used as substrate materials for surface‐enhanced Raman spectroscopy (SERS) with low cost, versatility, and biocompatibility, but their enhancement factors are generally quite low with a poor limit of detection. Here, ultrathin molybdenum dioxide (MoO₂) nanosheets synthesized by chemical vapor deposition demonstrated in large area are used as SERS substrates with superior signal uniformity in the whole area with a limit of detectable concentration down to 4 × 10^?8m and enhancement factor up to 2.1 × 10⁵, exceeding that of 2D materials and comparable to that of noble metal films. More practically important, the planar MoO₂ substrate is more robust than noble metals and shows excellent reusability and uniformity, which is usually prohibited for nanostructured or nanoparticle‐based metal oxide substrates. The enhancement is mainly attributed to the surface plasmon resonance effect as evidenced by the first principle calculations and UV–vis absorption spectroscopy characterization, which can be further increased by decreasing the thickness of the MoO₂ nanosheets. The overall superior performance makes the MoO₂ nanosheets an ideal substrate for practical SERS applications.     

Microfluidic Surface‐Enhanced Raman Scattering Sensors Based on Nanopillar Forests Realized by an Oxygen‐Plasma‐Stripping‐of‐Photoresist Technique

A novel surface‐enhanced Raman scattering (SERS) sensor is developed for real‐time and highly repeatable detection of trace chemical and biological indicators. The sensor consists of a polydimethylsiloxane (PDMS) microchannel cap and a nanopillar forest‐based open SERS‐active substrate. The nanopillar forests are fabricated based on a new oxygen‐plasma‐stripping‐of‐photoresist technique. The enhancement factor (EF) of the SERS‐active substrate reaches 6.06 × 10⁶, and the EF of the SERS sensor is about 4 times lower due to the influence of the PDMS cap. However, the sensor shows much higher measurement repeatability than the open substrate, and it reduces the sample preparation time from several hours to a few minutes, which makes the device more reliable and facile for trace chemical and biological analysis.     

Nanowire‐Intensified Metal‐Enhanced Fluorescence in Hybrid Polymer‐Plasmonic Electrospun Filaments

Hybrid polymer‐plasmonic nanostructures might combine high enhancement of localized fields from metal nanoparticles with light confinement and long‐range transport in subwavelength dielectric structures. Here, the complex behavior of fluorophores coupling to Au nanoparticles within polymer nanowires, which features localized metal‐enhanced fluorescence (MEF) with unique characteristics compared to conventional structures, is reported. The intensification effect when the particle is placed in the organic filaments is remarkably higher with respect to thin films of comparable thickness, thus highlighting a specific, nanowire‐related enhancement of MEF effects. A dependence on the confinement volume in the dielectric nanowire is also indicated, with MEF significantly increasing upon reduction of the wire diameter. These findings are rationalized by finite element simulations, predicting a position‐dependent enhancement of the quantum yield of fluorophores embedded in the fibers. Calculation of the ensemble‐averaged fluorescence enhancement unveils the possibility of strongly enhancing the overall emission intensity for structures with size twice the diameter of the embedded metal particles. These new, hybrid fluorescent systems with localized enhanced emission, and the general nanowire‐enhanced MEF effects associated to them, are highly relevant for developing nanoscale light‐emitting devices with high efficiency and intercoupled through nanofiber networks, highly sensitive optical sensors, and novel laser architectures.     

Self‐Assembled Large Au Nanoparticle Arrays with Regular Hot Spots for SERS

The cost‐effective self‐assembly of 80 nm Au nanoparticles (NPs) into large‐domain, hexagonally close‐packed arrays for high‐sensitivity and high‐fidelity surface‐enhanced Raman spectroscopy (SERS) is demonstrated. These arrays exhibit specific optical resonances due to strong interparticle coupling, which are well reproduced by finite‐difference time‐domain (FDTD) simulations. The gaps between NPs form a regular lattice of hot spots that enable a large amplification of both photoluminescence and Raman signals. At smaller wavelengths the hot spots are extended away from the minimum‐gap positions, which allows SERS of larger analytes that do not fit into small gaps. Using CdSe quantum dots (QDs) a 3–5 times larger photoluminescence enhancement than previously reported is experimentally demonstrated and an unambiguous estimate of the electromagnetic SERS enhancement factor of ≈10⁴ is obtained by direct scanning electron microscopy imaging of QDs responsible for the Raman signal. Much stronger enhancement of ≈10⁸ is obtained at larger wavelengths for benzenethiol molecules penetrating the NP gaps.     

Multifunctional Silver‐Embedded Magnetic Nanoparticles as SERS Nanoprobes and Their Applications

In this study, surface‐enhanced Raman spectroscopy (SERS)‐encoded magnetic nanoparticles (NPs) are prepared and utilized as a multifunctional tagging material for cancer‐cell targeting and separation. First, silver‐embedded magnetic NPs are prepared, composed of an 18‐nm magnetic core and a 16‐nm‐thick silica shell with silver NPs formed on the surface. After simple aromatic compounds are adsorbed on the silver‐embedded magnetic NPs, they are coated with silica to provide them with chemical and physical stability. The resulting silica‐encapsulated magnetic NPs (M‐SERS dots) produce strong SERS signals and have magnetic properties. In a model application as a tagging material, the M‐SERS dots are successfully utilized for targeting breast‐cancer cells (SKBR3) and floating leukemia cells (SP2/O). The targeted cancer cells can be easily separated from the untargeted cells using an external magnetic field. The separated targeted cancer cells exhibit a Raman signal originating from the M‐SERS dots. This system proves to be an efficient tool for separating targeted cells. Additionally, the magnetic‐field‐induced hot spots, which can provide a 1000‐times‐stronger SERS intensity due to aggregation of the NPs, are studied.     

Highly Surface‐roughened “Flower‐like” Silver Nanoparticles for Extremely Sensitive Substrates of Surface‐enhanced Raman Scattering

Surface‐enhanced Raman scattering (SERS) is a new optical spectroscopic analysis technique with potential for highly sensitive detection of molecules. Recently, many efforts have been made to find SERS substrates with high sensitivity and reproducibility. In this Research News article, we provide a focused review on the synthesis of monodispersed silver particles with a novel, highly roughened, “flower‐like” morphology by reducing silver nitrate with ascorbic acid in aqueous solutions. The nanometer‐scale surface roughness of the particles can provide several hot spots on a single particle, which significantly increases SERS enhancement. The incident polarization‐dependent SERS of individual particles is also studied. Although the different “hot spots” on a single particle can have a strong polarization dependency, the total Raman signals from an individual particle usually have no obvious polarization dependency. Moreover, these flower‐like silver particles can be measured by SERS with high enhancement several times, which indicates the high stability of the hot spots. Hence, the flower‐like silver particles here can serve as highly sensitive and reproducible SERS substrates.     

Pen‐on‐Paper Approach Toward the Design of Universal Surface Enhanced Raman Scattering Substrates

The translation of a technology from the laboratory into the real world should meet the demand of economic viability and operational simplicity. Inspired by recent advances in conductive ink pens for electronic devices on paper, we present a “pen‐on‐paper” approach for making surface enhanced Raman scattering (SERS) substrates. Through this approach, no professional training is required to create SERS arrays on paper using an ordinary fountain pen filled with plasmonic inks comprising metal nanoparticles of arbitrary shape and size. We demonstrate the use of plasmonic inks made of gold nanospheres, silver nanospheres and gold nanorods, to write SERS arrays that can be used with various excitation wavelengths. The strong SERS activity of these features allowed us to reach detection limits down to 10 attomoles of dye molecules in a sample volume of 10 μL, depending on the excitation wavelength, dye molecule and type of nanoparticles. Furthermore, such simple substrates were applied to pesticide detection down to 20 ppb. This universal approach offers portable, cost effective fabrication of efficient SERS substrates at the point of care. This approach should bring SERS closer to the real world through ink cartridges to be fixed to a pen to create plasmonic sensors at will.     

First‐Layer Effect in Graphene‐Enhanced Raman Scattering

Graphene as a substrate for enhancing Raman scattering, called graphene‐enhanced Raman scattering (GERS), has been reported in previous work. Herein, it is found that the “first‐layer effect”, which is widely used to explain the chemical‐enhanced mechanism in surface‐enhanced Raman scattering (SERS), exists in the GERS system. The Langmuir–Blodgett (LB) technique is used to construct mono‐ and multilayer ordered aggregates of protoporphyrin IX (PPP). Raman spectra of PPP with different layer numbers of the LB film on graphene are collected. The Raman signal from the first monolayer LB film of PPP has a larger contribution to the Raman enhancement than that from subsequent monolayers. Meanwhile, the Raman enhancement is dependent on the molecular configuration in contact with graphene, in which the functional group of PPP in direct contact with graphene has a stronger enhancement than other groups. These results reveal that GERS is strongly dependent on the distance between graphene and the molecule, which is convincing evidence that the Raman enhancement effect based on graphene belongs to the chemical‐enhanced mechanism. This discovery provides a convenient system for the study of the chemical‐enhanced mechanism and will benefit further understanding of SERS.     

Focusing Plasmons in Nanoslits for Surface‐Enhanced Raman Scattering

The focusing of plasmons to obtain a strong and localized electromagnetic‐field enhancement for surface‐enhanced Raman scattering (SERS) is increasing the interest in using plasmonic devices as molecular sensors. In this Full Paper, we report the successful fabrication and demonstration of a solid‐state plasmonic nanoslit–cavity device equipped with nanoantennas on a freestanding thin silicon membrane as a substrate for SERS. Numerical calculations predict a strong and spatially localized enhancement of the optical field in the nanoslit (6 nm in width) upon irradiation. The predicted enhancement factor of SERS was 5.3 × 10⁵, localized in an area of just 6 × 1.5 nm². Raman spectroscopy and imaging confirm an enhancement factor of ≈10⁶ for SERS from molecules chemisorbed at the nanoslit, and demonstrate the electromagnetic‐field‐enhancing function of the plasmonic nanoantennas. The freestanding membrane is open on both sides of the nanoslit, offering the potential for through‐slit molecular translocation studies, and opening bright new perspectives for SERS applications in real‐time (bio)chemical analysis.     

Non-lithographic SERS substrates: tailoring surface chemistry for Au nanoparticle cluster assembly

Near‐field plasmonic coupling and local field enhancement in metal nanoarchitectures, such as arrangements of nanoparticle clusters, have application in many technologies from medical diagnostics, solar cells, to sensors. Although nanoparticle‐based cluster assemblies have exhibited signal enhancements in surface‐enhanced Raman scattering (SERS) sensors, it is challenging to achieve high reproducibility in SERS response using low‐cost fabrication methods. Here an innovative method is developed for fabricating self‐organized clusters of metal nanoparticles on diblock copolymer thin films as SERS‐active structures. Monodisperse, colloidal gold nanoparticles are attached via a crosslinking reaction on self‐organized chemically functionalized poly(methyl methacrylate) domains on polystyrene‐block‐poly(methyl methacrylate) templates. Thereby nanoparticle clusters with sub‐10‐nanometer interparticle spacing are achieved. Varying the molar concentration of functional chemical groups and crosslinking agent during the assembly process is found to affect the agglomeration of Au nanoparticles into clusters. Samples with a high surface coverage of nanoparticle cluster assemblies yield relative enhancement factors on the order of 10⁹ while simultaneously producing uniform signal enhancements in point‐to‐point measurements across each sample. High enhancement factors are associated with the narrow gap between nanoparticles assembled in clusters in full‐wave electromagnetic simulations. Reusability for small‐molecule detection is also demonstrated. Thus it is shown that the combination of high signal enhancement and reproducibility is achievable using a completely non‐lithographic fabrication process, thereby producing SERS substrates having high performance at low cost.     

A High‐Sensitivity and Low‐Power Theranostic Nanosystem for Cell SERS Imaging and Selectively Photothermal Therapy Using Anti‐EGFR‐Conjugated Reduced Graphene Oxide/Mesoporous Silica/AuNPs Nanosheets

A high‐sensitivity and low‐power theranostic nanosystem that combines with synergistic photothermal therapy and surface‐enhanced Raman scattering (SERS) mapping is constructed by mesoporous silica self‐assembly on the reduced graphene oxide (rGO) nanosheets with nanogap‐aligned gold nanoparticles (AuNPs) encapsulated and arranged inside the nanochannels of the mesoporous silica layer. Rhodamine 6G (R6G) as a Raman reporter is then encapsulated into the nanochannels and anti‐epidermal growth factor receptor (EGFR) is conjugated on the nanocomposite surface, defined as anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, where PEG is polyethylene glycol and CPSS is carbon porous silica nanosheets. SERS spectra results show that rGO@CPSS‐Au‐R6G enhances 5 × 10⁶ magnification of the Raman signals and thus can be applied in the noninvasive cell tracking. Furthermore, it displays high sensitivity (detection limits: 10^?8m R6G solution) due to the “hot spots” effects by the arrangements of AuNPs in the nanochannels of mesoporous silica. The highly selective targeting of overexpressing EGFR lung cancer cells (A549) is observed in the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G, in contrast to normal cells (MRC‐5). High photothermal therapy efficiency with a low power density (0.5 W cm^?2) of near‐infrared laser can be achieved because of the synergistic effect by conjugated AuNPs and rGO nanosheets. These results demonstrate that the anti‐EGFR‐PEG‐rGO@CPSS‐Au‐R6G is an excellent new theranostic nanosystem with cell targeting, cell tracking, and photothermal therapy capabilities.     

In Situ Two‐Step Photoreduced SERS Materials for On‐Chip Single‐Molecule Spectroscopy with High Reproducibility

A method is developed to synthesize surface‐enhanced Raman scattering (SERS) materials capable of single‐molecule detection, integrated with a microfluidic system. Using a focused laser, silver nanoparticle aggregates as SERS monitors are fabricated in a microfluidic channel through photochemical reduction. After washing out the monitor, the aggregates are irradiated again by the same laser. This key step leads to full reduction of the residual reactants, which generates numerous small silver nanoparticles on the former nanoaggregates. Consequently, the enhancement ability of the SERS monitor is greatly boosted due to the emergence of new “hot spots.” At the same time, the influence of the notorious “memory effect” in microfluidics is substantially suppressed due to the depletion of surface residues. Taking these advantages, two‐step photoreduced SERS materials are able to detect different types of molecules with the concentration down to 10^?13m . Based on a well‐accepted bianalyte approach, it is proved that the detection limit reaches the single‐molecule level. From a practical point of view, the detection reproducibility at different probing concentrations is also investigated. It is found that the effective single‐molecule SERS measurements can be raised up to ≈50%. This microfluidic SERS with high reproducibility and ultrasensitivity will find promising applications in on‐chip single‐molecule spectroscopy.     

Precision Synthesis: Designing Hot Spots over Hot Spots via Selective Gold Deposition on Silver Octahedra Edges

A major challenge in plasmonic hot spot fabrication is to efficiently increase the hot spot volumes on single metal nanoparticles to generate stronger signals in plasmon‐enhanced applications. Here, the synthesis of designer nanoparticles, where plasmonic‐active Au nanodots are selectively deposited onto the edge/tip hot spot regions of Ag nanoparticles, is demonstrated using a two‐step seed‐mediated precision synthesis approach. Such a “hot spots over hot spots” strategy leads to an efficient enhancement of the plasmonic hot spot volumes on single Ag nanoparticles. Through cathodoluminescence hyperspectral imaging of these selective edge gold‐deposited Ag octahedron (SEGSO), the increase in the areas and emission intensities of hot spots on Ag octahedra are directly visualized after Au deposition. Single‐particle surface‐enhanced Raman scattering (SERS) measurements demonstrate 10‐fold and 3‐fold larger SERS enhancement factors of the SEGSO as compared to pure Ag octahedra and non‐selective gold‐deposited Ag octahedra (NSEGSO), respectively. The experimental results corroborate well with theoretical simulations, where the local electromagnetic field enhancement of our SEGSO particles is 15‐fold and 1.3‐fold stronger than pure Ag octahedra and facet‐deposited particles, respectively. The growth mechanisms of such designer nanoparticles are also discussed together with a demonstration of the versatility of this synthetic protocol.     

Recent Advances in 2D Inorganic Nanomaterials for SERS Sensing

Surface‐enhanced Raman spectroscopy is a powerful and sensitive analytical tool that has found application in chemical and biomolecule analysis and environmental monitoring. Since its discovery in the early 1970s, a variety of materials ranging from noble metals to nanostructured materials have been employed as surface enhanced Raman scattering (SERS) substrates. In recent years, 2D inorganic materials have found wide use in the development of SERS‐based chemical sensors owing to their unique thickness dependent physico‐chemical properties with enhanced chemical‐based charge‐transfer processes. Here, recent advances in the application of various 2D inorganic nanomaterials, including graphene, boron nitride, semiconducting metal oxides, and transition metal chalcogenides, in chemical detection via SERS are presented. The background of the SERS concept, including its basic theory and sensing mechanism, along with the salient features of different nanomaterials used as substrates in SERS, extending from monometallic nanoparticles to nanometal oxides, is comprehensively discussed. The importance of 2D inorganic nanomaterials in SERS enhancement, along with their application toward chemical detection, is explained in detail with suitable examples and illustrations. In conclusion, some guidelines are presented for the development of this promising field in the future.     

Spectroscopic tags using dye-embedded nanoparticles and surface-enhanced Raman scattering

Surface-enhanced Raman scattering is capable of providing rich vibrational information at the level of single molecules and single nanoparticles, but the practical applications of this enormous enhancement effect are still a challenge. Here we report a new class of dye-embedded core-shell nanoparticles that are highly efficient for surface Raman enhancement and could be used as spectroscopic tags for multiplexed detection and spectroscopy. The core-shell particles contain a metallic core for optical enhancement, a reporter molecule for spectroscopic signature, and an encapsulating silica shell for protection and conjugation. A surprising finding is that organic molecules with an isothiocyanate (-N=C=S) group or multiple sulfur atoms are compatible with silica encapsulation. In comparison with fluorescent dyes and quantum dots, enhanced Raman probes contain a built-in mechanism for signal amplification and provide rich spectroscopic information under ambient experimental conditions.