作为一种新型清洁可再生能源,钙钛矿太阳能电池(Perovskite solar cells,PSC)从发展至今已取得了重大的突破,成为研究的热点。主要介绍了钙钛矿太阳能电池的基本结构和工作原理及电子传输层、钙钛矿层、空穴传输层的制备方法,以及在发展过程中所面临的技术问题,最后展望了钙钛矿太阳能电池未来的研究重点及发展前景。 相似文献
In this work, a SnO2/ZnO bilayered electron transporting layer (ETL) aimed to achieve low energy loss and large open‐circuit voltage (Voc) for high‐efficiency all‐inorganic CsPbI2Br perovskite solar cells (PVSCs) is introduced. The high‐quality CsPbI2Br film with regular crystal grains and full coverage can be realized on the SnO2/ZnO surface. The higher‐lying conduction band minimum of ZnO facilitates desirable cascade energy level alignment between the perovskite and SnO2/ZnO bilayered ETL with superior electron extraction capability, resulting in a suppressed interfacial trap‐assisted recombination with lower charge recombination rate and greater charge extraction efficiency. The as‐optimized all‐inorganic PVSC delivers a high Voc of 1.23 V and power conversion efficiency (PCE) of 14.6%, which is one of the best efficiencies reported for the Cs‐based all‐inorganic PVSCs to date. More importantly, decent thermal stability with only 20% PCE loss is demonstrated for the SnO2/ZnO‐based CsPbI2Br PVSCs after being heated at 85 °C for 300 h. These findings provide important interface design insights that will be crucial to further improve the efficiency of all‐inorganic PVSCs in the future. 相似文献
Organometallic mixed halide perovskite solar cells (PSCs) have emerged as a promising photovoltaic technology with increasingly improved device efficiency exceeding 24%. Charge transport layers, especially electron transport layers (ETLs), are verified to play a vital role in device performance and stability. Recently, metal oxides (MOs) have been widely studied as ETLs for high‐performance PSCs due to their excellent electronic properties, superb versatility, and great stability. This Review briefly discusses the development of PSCs' architecture and outlines the requirements for MO ETLs. Additionally, recent progress of MO ETLs from preparation to optimization for efficient PSCs is systematically summarized and highlighted to associate the versatility of MO ETLs with the performance of devices. Finally, a summary and prospectives for the future development of MO ETLs toward practical application of high‐performance PSCs are drawn. 相似文献
Recent perovskite solar cell (PSC) advances have pursued strategies for reducing interfacial energetic mismatches to mitigate energy losses, as well as to minimize interfacial and bulk defects and ion vacancies to maximize charge transfer. Here nonconjugated multi‐zwitterionic small‐molecule electrolytes (NSEs) are introduced, which act not only as charge‐extracting layers for barrier‐free charge collection at planar triple cation PSC cathodes but also passivate charged defects at the perovskite bulk/interface via a spontaneous bottom‐up passivation effect. Implementing these synergistic properties affords NSE‐based planar PSCs that deliver a remarkable power conversion efficiency of 21.18% with a maximum VOC = 1.19 V, in combination with suppressed hysteresis and enhanced environmental, thermal, and light‐soaking stability. Thus, this work demonstrates that the bottom‐up, simultaneous interfacial and bulk trap passivation using NSE modifiers is a promising strategy to overcome outstanding issues impeding further PSC advances. 相似文献
Perovskite solar cells (PSCs) stand at the forefront of photovoltaic research, with current efficiencies surpassing 26.1%. This review critically examines the role of electron transport materials (ETMs) in enhancing the performance and longevity of PSCs. It presents an integrated overview of recent advancements in ETMs, like TiO2, ZnO, SnO2, fullerenes, non-fullerene polymers, and small molecules. Critical challenges are regulated grain structure, defect passivation techniques, energy level alignment, and interfacial engineering. Furthermore, the review highlights innovative materials that promise to redefine charge transport in PSCs. A detailed comparison of state-of-the-art ETMs elucidates their effectiveness in different perovskite systems. This review endeavors to inform the strategic enhancement and development of n-type electron transport layers (ETLs), delineating a pathway toward the realization of PSCs with superior efficiency and stability for potential commercial deployment. 相似文献
Because of the rapid rise of the efficiency, perovskite solar cells are currently considered as the most promising next‐generation photovoltaic technology. Much effort has been made to improve the efficiency and stability of perovskite solar cells. Here, it is demonstrated that the addition of a novel organic cation of 2‐(6‐bromo‐1,3‐dioxo‐1H‐benzo[de]isoquinolin‐2(3H)‐yl)ethan‐1‐ammonium iodide (2‐NAM), which has strong Lewis acid and base interaction (between C?O and Pb) with perovskite, can effectively increase crystalline grain size and reduce charge carrier recombination of the double cation FA0.83MA0.17PbI2.51Br0.49 perovskite film, thus boosting the efficiency from 17.1 ± 0.8% to 18.6 ± 0.9% for the 0.1 cm2 cell and from 15.5 ± 0.5% to 16.5 ± 0.6% for the 1.0 cm2 cell. The champion cell shows efficiencies of 20.0% and 17.6% with active areas of 0.1 and 1.0 cm2, respectively. Moreover, the hysteresis behavior is suppressed and the stability is improved. The result provides a promising route to further elevate efficiency and stability of perovskite solar cells by the fine tuning of triple organic cations. 相似文献
An inverted planar heterojunction perovskite solar cell (PSC) is one of the most competitive photovoltaic devices exhibiting a high power conversion efficiency (PCE) and nearly free hysteresis in the voltage–current output. However, the band alignment between the transport materials and the perovskite absorber has not been optimized, resulting in a lower open-circuit voltage (Voc) than that of regular PSCs. To address this issue, we tune the band alignment in perovskite photovoltaic architecture by introducing bilayer structured transport materials, e.g., the hole transport material poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/V2O5. In this study, solution processed inorganic V2Ox interlayer is incorporated into PEDOT:PSS for achieving improved film surface properties as well as optical and electrical properties. For example, the work function (WF) was changed from 5.1 to 5.4 eV. A remarkably high PCE of 17.5% with nearly free hysteresis and a stabilized efficiency of 17.1% have been achieved. Electronic impedance spectra (EIS) demonstrate a significant increase in the recombination resistance after introducing the interlayer, associated with the high Voc output value of 1.05 V. Transient photocurrent and photovoltage measurements indicate that a comparable charge transport process and an inhibited recombination process occur in the PSC with the introduction of the V2Ox interlayer.
Despite the rapid increase of efficiency, perovskite solar cells (PSCs) still face some challenges, one of which is the current–voltage hysteresis. Herein, it is reported that yttrium‐doped tin dioxide (Y‐SnO2) electron selective layer (ESL) synthesized by an in situ hydrothermal growth process at 95 °C can significantly reduce the hysteresis and improve the performance of PSCs. Comparison studies reveal two main effects of Y doping of SnO2 ESLs: (1) it promotes the formation of well‐aligned and more homogeneous distribution of SnO2 nanosheet arrays (NSAs), which allows better perovskite infiltration, better contacts of perovskite with SnO2 nanosheets, and improves electron transfer from perovskite to ESL; (2) it enlarges the band gap and upshifts the band energy levels, resulting in better energy level alignment with perovskite and reduced charge recombination at NSA/perovskite interfaces. As a result, PSCs using Y‐SnO2 NSA ESLs exhibit much less hysteresis and better performance compared with the cells using pristine SnO2 NSA ESLs. The champion cell using Y‐SnO2 NSA ESL achieves a photovoltaic conversion efficiency of 17.29% (16.97%) when measured under reverse (forward) voltage scanning and a steady‐state efficiency of 16.25%. The results suggest that low‐temperature hydrothermal‐synthesized Y‐SnO2 NSA is a promising ESL for fabricating efficient and hysteresis‐less PSC. 相似文献
Organic–inorganic hybrid perovskite solar cells (HPSCs) have achieved an impressive power conversion efficiency (PCE) of 25.2% in 2019. At this stage, it is of paramount importance to understand in detail the working mechanism of these devices and which physical and chemical processes govern not only their power conversion efficiency but also their long‐term stability. The interfaces between the perovskite film and the charge transport layers are among the most important factors in determining both the PCE and stability of HPSCs. Herein, an overview is provided on the recent advances in the fundamental understanding of how these interfaces influence the performance of HPSCs. Firstly, it is discussed how the surface energy of the charge transport layer, the energy level alignment at the interfaces, the charge transport in interfacial layers, defects and mobile ions in the perovskite film, and interfacial layers or at the interfaces affect the charge recombination as well as hysteresis and light soaking phenomenon. Then it is discussed how the interfaces and interfacial materials influence the stability of HPSCs. At the same time, an overview is also provided on the various design strategies for the interfaces and the interfacial materials. At the end, the outlook for the development of highly efficient and stable HPSCs is provided. 相似文献
The highest power conversion efficiency of perovskite solar cells is beyond 22%. Charge transport layers are found to be critical for device performance and stability. A traditional electron transport layer (ETL), such as TiO2, is not very efficient for charge extraction at the interface, especially in planar structure. In addition, the devices using TiO2 suffer from serious degradation under ultraviolet illumination. SnO2 owns a better band alignment with the perovskite absorption layer and high electron mobility, which is helpful for electron extraction. In this Review, recent progresses in efficient and stable perovskite solar cells using SnO2 as ETL are summarized. 相似文献
In this work, solar cells based on methylammonium lead iodide (MAPbI3) doped in solution with C70 fullerene in a mesoporous as well as planar electron‐transporting layer (ETL)‐free architecture are realized, showcasing in the latter case a record efficiency of 15.7% and an improved open‐circuit voltage (VOC). Contrary to the bulk heterojunction previously reported, the C70 molecules do not phase segregate and they are rather finely dispersed in the perovskite film, possibly infiltrating at the grain boundaries, while assisting the growth of a highly uniform perovskite layer. By means of time‐resolved femtosecond‐to‐nanosecond optical spectroscopy, with an extended spectral coverage, it is observed that electrons photogenerated in the perovskite are transferred to C70 with a time constant of 20 ps. Despite being captured by C70, electrons are not deeply trapped and can potentially bounce back into the perovskite, as suggested by the high fill factor and enhanced VOC of the MAPbI3:C70 solar cells, especially in the case of the ETL‐free device configuration. 相似文献
The power conversion efficiency (PCE) of perovskite solar cells (PSCs) has now exceeded 20%; thus, research focus has shifted to establishing the foundations for commercialization. One of the pivotal themes is to curtail the overall fabrication time, to reduce unit cost, and mass‐produce PSCs. Additionally, energy dissipation during the thermal annealing (TA) stage must be minimized by realizing a genuine low‐temperature (LT) process. Here, tin oxide (SnO2) thin films (TFs) are formulated at extremely high speed, within 5 min, under an almost room‐temperature environment (<50 °C), using atmospheric Ar/O2 plasma energy (P‐SnO2) and are applied as an electron transport layer of a “n–i–p”‐type planar PSC. Compared with a thermally annealed SnO2 TF (T‐SnO2), the P‐SnO2 TF yields a more even surface but also outstanding electrical conductivity with higher electron mobility and a lower number of charge trap sites, consequently achieving a superior PCE of 19.56% in P‐SnO2‐based PSCs. These findings motivate the use of a plasma strategy to fabricate various metal oxide TFs using the sol–gel route. 相似文献
Organic–inorganic lead halide perovskite solar cells (PVSCs), as a competing technology with traditional inorganic solar cells, have now realized a high power conversion efficiency (PCE) of 22.1%. In PVSCs, interfacial carrier recombination is one of the dominant energy‐loss mechanisms, which also results in the simultaneous loss of potential efficiency. In this work, for planar inverted PVSCs, the carrier recombination is dominated by the dopant concentration in the p‐doped hole transport layers (HTLs), since the F4‐TCNQ dopant induces more charge traps and electronic transmission channels, thus leading to a decrease in open‐circuit voltages (VOC). This issue is efficiently overcome by inserting a thin insulating polymer layer (poly(methyl methacrylate) or polystyrene) as a passivation layer with an appropriate thickness, which allows for increases in the VOC without significantly sacrificing the fill factor. It is believed that the passivation layer attributes to the passivation of interfacial recombination and the suppression of current leakage at the perovskite/HTL interface. By manipulating this interfacial passivation technique, a high PCE of 20.3% is achieved without hysteresis. Consequently, this versatile interfacial passivation methodology is highly useful for further improving the performance of planar inverted PVSCs. 相似文献
In planar perovskite solar cells, it is vital to engineer the extraction and recombination of electron–hole pairs at the electron transport layer/perovskite interface for obtaining high performance. This study reports a novel titanium oxide (TiO2) bilayer with different Fermi energy levels by combing atomic layer deposition and spin‐coating technique. Energy band alignments of TiO2 bilayer can be modulated by controlling the deposition order of layers. The TiO2 bilayer based perovskite solar cells are highly efficient in carrier extraction, recombination suppression, and defect passivation, and thus demonstrate champion efficiencies up to 16.5%, presenting almost 50% enhancement compared to the TiO2 single layer based counterparts. The results suggest that the bilayer with type II band alignment as electron transport layers provides an efficient approach for constructing high‐performance planar perovskite solar cells. 相似文献
It is crucial to retard the carrier recombination and minimize the energy loss at the transparent electrode/electron transport layer (ETL)/perovskite absorber interfaces to improve the performance of the perovskite solar cells (PSCs). Here, a bilayered TiO2/WO3 film is designed as ETL by combining atomic layer deposition (ALD) technology and spin‐coating process. The ALD‐TiO2 underlayer fills the fluorine‐doped tin oxide (FTO) valleys and makes the surface smoother, which effectively avoids the shunt pathways between perovskite layer and FTO substrate and thereby suppresses electron–hole recombination at the interface. Moreover, the presence of hydrophilic TiO2 underlayer is helpful in forming a uniform and compact WO3 layer which is beneficial for extracting electron from perovskite to ETL. Meanwhile, the lower valance band minimum level of TiO2 relative to WO3 can efficiently enhance the hole‐blocking ability. By employing the optimized TiO2 (7 nm)/WO3 bilayer as ETL, the resulting cell exhibits an obviously enhanced power conversion efficiency of up to 20.14%, which is much better than the single WO3 or TiO2 ETL based device. This work is expected to provide a viable path to design ultrathin and compact ETL for efficient PSCs. 相似文献
Metal halide perovskites have been in the limelight in recent years due to their enormous potential for use in optoelectronic devices, owing to their unique combination of properties, such as high absorption coefficient, long charge‐carrier diffusion lengths, and high defect tolerance. Perovskite‐based solar cells and light‐emitting diodes (LEDs) have achieved remarkable breakthroughs in a comparatively short amount of time. As of writing, a certified power conversion efficiency of 22.7% and an external quantum efficiency of over 10% have been achieved for perovskite solar cells and LEDs, respectively. Interfaces and defects have a critical influence on the properties and operational stability of metal halide perovskite optoelectronic devices. Therefore, interface and defect engineering are crucial to control the behavior of the charge carriers and to grow high quality, defect‐free perovskite crystals. Herein, a comprehensive review of various strategies that attempt to modify the interfacial characteristics, control the crystal growth, and understand the defect physics in metal halide perovskites, for both solar cell and LED applications, is presented. Lastly, based on the latest advances and breakthroughs, perspectives and possible directions forward in a bid to transcend what has already been achieved in this vast field of metal halide perovskite optoelectronic devices are discussed. 相似文献
Molecularly engineered novel dopant‐free hole‐transporting materials for perovskite solar cells (PSCs) combined with mixed‐perovskite (FAPbI3)0.85(MAPbBr3)0.15 (MA: CH3NH3+, FA: NH=CHNH3+) that exhibit an excellent power conversion efficiency of 18.9% under AM 1.5 conditions are investigated. The mobilities of FA‐CN, and TPA‐CN are determined to be 1.2 × 10?4 cm2 V?1 s?1 and 1.1 × 10?4 cm2 V?1 s?1, respectively. Exceptional stability up to 500 h is measured with the PSC based on FA‐CN. Additionally, it is found that the maximum power output collected after 1300 h remained 65% of its initial value. This opens up new avenue for efficient and stable PSCs exploring new materials as alternatives to Spiro‐OMeTAD. 相似文献
下载免费PDF全文