Degradation Mechanisms in Small‐Molecule and Polymer Organic Light‐Emitting Diodes

Degradation in organic light‐emitting diodes (OLEDs) is a complex problem. Depending upon the materials and the device architectures used, the degradation mechanism can be very different. In this Progress Report, using examples in both small molecule and polymer OLEDs, the different degradation mechanisms in two types of devices are examined. Some of the extrinsic and intrinsic degradation mechanisms in OLEDs are reviewed, and recent work on degradation studies of both small‐molecule and polymer OLEDs is presented. For small‐molecule OLEDs, the operational degradation of exemplary fluorescent devices is dominated by chemical transformations in the vicinity of the recombination zone. The accumulation of degradation products results in coupled phenomena of luminance‐efficiency loss and operating‐voltage rise. For polymer OLEDs, it is shown how the charge‐transport and injection properties affect the device lifetime. Further, it is shown how the charge balance is controlled by interlayers at the anode contact, and their effects on the device lifetime are discussed.     

OLEDs: Degradation Mechanisms in Small‐Molecule and Polymer Organic Light‐Emitting Diodes (Adv. Mater. 34/2010)

Degradation in organic light‐emitting diodes (OLEDs) is a complex problem. Depending upon the materials and the device architectures used, the degradation mechanism can be very different. In this Progress Report, using examples in both small molecule and polymer OLEDs, the different degradation mechanisms in two types of devices are examined. Some of the extrinsic and intrinsic degradation mechanisms in OLEDs are reviewed, and recent work on degradation studies of both small‐molecule and polymer OLEDs is presented. For small‐molecule OLEDs, the operational degradation of exemplary fluorescent devices is dominated by chemical transformations in the vicinity of the recombination zone. The accumulation of degradation products results in coupled phenomena of luminance‐efficiency loss and operating‐voltage rise. For polymer OLEDs, it is shown how the charge‐transport and injection properties affect the device lifetime. Further, it is shown how the charge balance is controlled by interlayers at the anode contact, and their effects on the device lifetime are discussed.     

Flexible Blade‐Coated Multicolor Polymer Light‐Emitting Diodes for Optoelectronic Sensors

A method to print two materials of different functionality during the same printing step is presented. In printed electronics, devices are built layer by layer and conventionally only one type of material is deposited in one pass. Here, the challenges involving printing of two emissive materials to form polymer light‐emitting diodes (PLEDs) that emit light of different wavelengths without any significant changes in the device characteristics are described. The surface‐energy‐patterning technique is utilized to print materials in regions of interest. This technique proves beneficial in reducing the amount of ink used during blade coating and improving the reproducibility of printed films. A variety of colors (green, red, and near‐infrared) are demonstrated and characterized. This is the first known attempt to print multiple materials by blade coating. These devices are further used in conjunction with a commercially available photodiode to perform blood oxygenation measurements on the wrist, where common accessories are worn. Prior to actual application, the threshold conditions for each color are discussed, in order to acquire a stable and reproducible photoplethysmogram (PPG) signal. Finally, based on the conditions, PPG and oxygenation measurements are successfully performed on the wrist with green and red PLEDs.     

Infrared Organic Light‐Emitting Diodes with Carbon Nanotube Emitters

While organic light‐emitting diodes (OLEDs) covering all colors of the visible spectrum are widespread, suitable organic emitter materials in the near‐infrared (nIR) beyond 800 nm are still lacking. Here, the first OLED based on single‐walled carbon nanotubes (SWCNTs) as the emitter is demonstrated. By using a multilayer stacked architecture with matching charge blocking and charge‐transport layers, narrow‐band electroluminescence at wavelengths between 1000 and 1200 nm is achieved, with spectral features characteristic of excitonic and trionic emission of the employed (6,5) SWCNTs. Here, the OLED performance is investigated in detail and it is found that local conduction hot‐spots lead to pronounced trion emission. Analysis of the emissive dipole orientation shows a strong horizontal alignment of the SWCNTs with an average inclination angle of 12.9° with respect to the plane, leading to an exceptionally high outcoupling efficiency of 49%. The SWCNT‐based OLEDs represent a highly attractive platform for emission across the entire nIR.     

Mixed Lead–Tin Halide Perovskites for Efficient and Wavelength‐Tunable Near‐Infrared Light‐Emitting Diodes

Near‐infrared (NIR) light‐emitting diodes (LEDs), with emission wavelengths between 800 and 950 nm, are useful for various applications, e.g., night‐vision devices, optical communication, and medical treatments. Yet, devices using thin film materials like organic semiconductors and lead based colloidal quantum dots face certain fundamental challenges that limit the improvement of external quantum efficiency (EQE), making the search of alternative NIR emitters important for the community. In this work, efficient NIR LEDs with tunable emission from 850 to 950 nm, using lead–tin (Pb‐Sn) halide perovskite as emitters are demonstrated. The best performing device exhibits an EQE of 5.0% with a peak emission wavelength of 917 nm, a turn‐on voltage of 1.65 V, and a radiance of 2.7 W Sr^?1 m^?2 when driven at 4.5 V. The emission spectra of mixed Pb‐Sn perovskites are tuned either by changing the Pb:Sn ratio or by incorporating bromide, and notably exhibit no phase separation during device operation. The work demonstrates that mixed Pb‐Sn perovskites are promising next generation NIR emitters.