Identification and fermentation optimization of protopectinase-overproducing strain Aspergillus niger CD-01 for pectin production

In order to solve the citrus peel resource waste problem and minimize the drawbacks of chemical extraction of pectin, a protopectinase-overproducing strain CD-01 for pectin production was isolated from a pit soil dumped with perished orange in Changde City, Hunan Province of China. The strain CD-01 had the same morphology and 28S rRNA gene sequence (FJ184995) as that of Aspergillus niger (ATCC 64028). It was thus identified and named as Aspergillus niger CD-01. The fermentation condition was optimized based on L₉(3⁴) orthogonal experimental design and the variances analyses. The results show that the optimal condition for producing pectin is as follows: time 36 h, temperature 35 °C, pH 5, and urea as the nitrogen source. Under this condition, the pectin yield can reach up to 24.5%. This shows a great potential of Aspergillus niger CD-01 in pectin extraction from citrus. Foundation item: Projects(50621063, 50674101) supported by the National Natural Science Foundation of China     

Isolation and characterization of YNTC-1, a novel Alicyclobacillus sendaiensis strain

A heterotrophic acidothermophilic bacterial strain, YNTC-1, was isolated from an acidic hot spring in Tengchong, Yunan, China. YNTC-1 grows at pH value of 1.5-8.0 and temperature of 40-70 ℃, with optimal pH and temperature at 3.0 and 55 ℃, respectively. The cells of the strain are in shape of short rod, with 1.0-1.2 μm in length and 0.7-0.8 μm in diameter, and with distinct spores at both poles of each cell. The predominant fatty acids in cellular membrane of the strain are C18：1 ω7c. 16s rRNA gene analysis reveals that this strain is closely related to Alicyclobacillus sendaiensis, with over 99% sequence similarity. Based on phenotypic and genotypic analyses, YNTC-1 is identified as a member ofA. sendaiensis. Considering some important morphological and biochemical differences between strain YNTC-1 and A. sendaiensis ATCC 27009T, YNTC-1 may be proposed to be a novel subspecies of A. sendaiensis. However, this viewpoint has to be confirmed by further studies. Co-bioleaching of pyrite and chalcopyrite with strain YN22, Sulfobacillus thermosulfidooxidans, shows that strain YNTC-1 has no evident influence on bioleaching rates of these two sulphide minerals.     

Characterization of tricalcium phosphate solubilization by Stenotrophomonas maltophilia YC isolated from phosphate mines

The phosphate solubilizing characteristics of a strain YC, which was isolated from phosphate mines (Hubei, China), were studied in National Botanical Research Institute’s phosphate (NBRIP) growth medium containing tricalcium phosphate (TCP) as sole phosphorus (P) source. The strain YC is identified as Stenotrophomonas maltophilia (S. maltophilia) based upon the results of morphologic, physiological and biochemical characteristics and 16S rRNA sequences analysis. The results show that the strain S. maltophilia YC can solubilize TCP and release soluble P in NBRIP growth medium. A positive correlation between concentration of soluble P and population of the isolate and a negative correlation between concentration of soluble P and pH in the culture medium are observed from statistical analysis results. Moreover, gluconic acid is detected in the culture medium by HPLC analysis. It indicates that the isolate can release gluconic acid during the solubilizing experiment, which causes acidification of the culture medium and then TCP solubilization. S. maltophilia YC has a maximal TCP solubilizing capability when using maltose as carbon source and ammonium nitrate as nitrogen source, respectively, in NBRIP growth medium. Foundation item: Project(2004CB619201) supported by the Major State Basic Research and Development Program of China; Project(Z200515002) supported by the Key Project Foundation of the Education Department of Hubei Province, China; Project(GCP200801) supported by the Open Research Fund of Key Laboratory for Green Chemical Process of Ministry of Education, China; Project(Q200811) supported by the Youths Science Foundation of Wuhan Institute of Technology, China     

Coating of Fe, Ni on α-alumina microspheres by heterogeneous precipitation

1INTRODUCTION Themagneticmetal coatedceramicoxides,core shellstructuralcompositematerials,inwhichthinmetallicfilmsarecoatedonaceramicoxide matrixwithmicrometerparticlesizes,areattrac tiveduetothecombinationofthefunctionalchar acteristicsofmetalsandmechanicalpropertiesoftheceramicmatrix.Theceramic basedtransition metal coated,core shellcompositessuchasNi coatedAl2O3[1],Fe coatedAl2O3[2],FeNi coated Al2O3[3]orCoFe coatedSiO2[4],havebeenfoundtoexhibitinterestingfunctionalperformancesdue…     

Isolation of Leptospirillum ferriphilum by single-layered solid medium

According to physiological and biochemical characteristics of Leptospirillum ferriphilum,a strain of object bacteria was isolated successfully.Bacteria were enriched by selective liquid medium and plated on designed single-layered agar solid medium.Colony was cultured and bacteria were collected.The morphologies of the object bacteria were observed using crystal violet staining,scanning electron microscope(SEM)and transmission electron microscope(TEM).The result of 16S rDNA identification shows that this bacterium belongs to Leptospirillum ferriphilum and it is named as Leptospirillum ferriphilum strain D1.These results indicate that this new single-layered agar solid medium is efficient and simple for isolation of Leptospirillum ferriphilum.Additionally,physiological-biochemical characteristics show that the optimum initial pH value and its growth temperature are 1.68 and 40 ℃,respectively.The culture of it is used to leach a complex concentrate chalcopyrite,the leaching efficiencies of copper and iron are 1.93 % and 13.74 %,respectively,and it is more effective than the A.ferrooxidans culture in the leaching of the complex concentrate chalcopyrite.     

Adsorption characteristics of thiobacillus ferrooxidans on surface of sulfide minerals

By using thiobacillus ferroxidans (T. f) from Qixiashan, Hubei Province, China, the adsorption characteristics of T. f on surface of sulfide mineral were studied. The influences of adsorption time, pH value, temperature, initial inoculated concentration of bacteria, concentration of sulfide mineral powder, and variety of minerals on the adsorption characteristics were firstly investigated by using the ninhydrin colorimetric method, and the changes of contact angles and Zeta potentials of mineral surface during the bacterial adsorption were then determined. The results show that when the leaching experiments are performed for a long time from several days to a month, the maximal quantity of adsorption of T f on the surface of pyrite is obtained under the following conditions: leaching for 20 d, pH value in range of 1–2 and temperature at 30 °C, respectively; when the bio-leaching experiments are performed for a shorter leaching time, the maximal quantity of adsorption is obtained under the conditions: bio-leaching for 2 h, at 2.4×10⁷ cell/mL of initial inoculated bacteria concentration, and at 10% of mineral powder concentration; and the adsorption quantities are different from one sulfide mineral to another, and the adsorption of T. f on the surface of sulfide minerals includes three phases: increasing phase, stationary phase and decreasing phase. Foundation item: Project(50321402) supported by the National Natural Science Foundation of China; project (2004CB619204) supported by the National Key Fundamental Research and Development Program of China     

Synthesis and coloring properties of Cd（S1-xSex） pigments by precipitate-hydrothermal method

Cd（S1-xSex） pigments （red to yellow） were synthesized by precipitate-hydrothermal method. The structure, morphology and hue of the powder were characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, energy dispersive X-ray spectroscopy （EDAX） and CIE chromaticity. The optimum synthesis conditions were obtained and reaction mechanism was further analyzed as well. The results show that molar ratio of S to Se, pH value and hydrothermal reaction conditions have great effects on the hues of the pigments. Pigments with vivid hues are obtained under the conditions that pH value is about 13.0, hydrothermal reaction condition is at 140 ℃ for 4 h or at 160 ℃ for 6 h. The reaction mechanism is that Se^2- of Cd（S1-xSex） substitutes S^2- of CdS and then forms a continuous solid solution.     

Speciation of chromium in soil inoculated with Cr（Ⅵ）-reducing strain, Bacillus sp. XW-4

Cr(VI)-amended soil was inoculated with Cr(VI)-reducing strain, Bacillus sp. XW-4 and incubated at 28 °C in an incubator. Cr(VI) reduction, available Cr and Cr fraction in soils were studied. The results show that addition of Bacillus sp. XW-4 can promote Cr(VI) reduction, but inoculation of this strain has a negative effect on the decrease of available Cr content in soil. In controls (without this strain) amended with 100 and 200 mg/kg of Cr(VI), Cr(VI) contents decrease to about 41 and 92 mg/kg respectively after incubation of 4 d, while in soil inoculated with XW-4, Cr(VI) contents decrease to about 18 and 60 mg/kg, respectively. The content of available Cr in soils with inoculation of XW-4 is higher than that in controls. Chromium is partitioned into water soluble Cr, exchangeable Cr, precipitated Cr, Cr bound to organics and residual Cr. The highest content of Cr is observed in residual form and water soluble Cr is not detected for all treatments after 42 d, but the soils inoculated with Bacillus sp. XW-4 contain higher content of exchangeable Cr and lower content of precipitated Cr than the soil without the inoculum. Inoculation of Bacillus sp. XW-4 can increase chromium activity in soils. Foundation item: Project(20050532009) supported by the Doctoral Foundation of Ministry of Education of China; Project supported by Program for Changjiang Scholars and Innovative Research Team in University     

Structure transition of nano-titania during calcination

1　INTRODUCTIONTitaniahasthreecrystallines :brookite ,anataseandrutile .Theirbasicstructuralunitisthesame[TiO6 ]octahedron ,buttheirlatticestructuresaredifferent .Forexample ,brookitebelongstorhombiccrystallo series ,whilerutileandanatasebelongtosquarecrystallo series .Thoughrutileandanatasearethesamecrystallo series ,theirsymmetricalelementsandunit cellparametersaredifferent[1] .Inrecentyears ,muchattentionhasbeenpaidtophasetransformationoftitaniaparticle ,especiallytothetemperatureofph…     

Screening, identification and desilication of a silicate bacterium

The strain Lv（1- z） isolated from the Henan bauxite was characterized by morphological observation, biochemical and physiological identification, and 16S rDNA sequence analysis. The influences of temperature, initial pH value, the volume of medium, shaking speed and illite concentration on the desilicating ability of the strain Lv（1- z） were investigated. The results show that the bacterium is a Gram-negative rod-shaped bacterium with oval endspores and thick capsule, but without flagellum. The biochemical and physiological tests indicate that the strain Lv（1- z） is similar to Bacillus rnucilaginosus. In GenBank the 16S rDNA sequence similarity of the strain Lv（1- z） and the B. rnucilaginosus YNUCC0001（AY571332） is more than 99%. Based on the above results, the strain Lv（1- z） is identified as B. rnucilaginosus. The optimum conditions for the strain L（1- z） to remove silicon from illite are as follows., temperature is 30℃ ;initial pH value is 7.5; medium volume in 200 mL bottle is 60 mL; shaking speed of rotary shaker is 220 r/m ; illite concentration is 1%.     

Enantiomeric separation of phenylsuccinic acid by cyclodextrin-modified reversed phase high-performance liquid chromatography

The chiral separation of phenylsuccinic acid (PSA) was studied by reversed phase high-performance liquid chromatography (RP-HPLC) with cyclodextrins (CDs) as chiral mobile phase additives. The effects of types of CDs, concentration of hydroxypropyl-β-cyclodextrin (HP-β-CD), percentage of organic modifier, pH value and column temperature on enantioselective separation were investigated. The quantification property of the developed RP-HPLC method was examined. The chiral recognition mechanism of PSA was also discussed. The results show that a baseline separation of PSA enantiomers is achieved on a Lichrospher C18 column (4.6 mm (inner diameter)×250 mm, 5 μm) with HP-β-CD as chiral mobile phase additive. The capacity factors of R-PSA and S-PSA are 3.94 and 4.80, respectively. The separation factor and resolution are respectively 1.22 and 8.03. The mobile phase is a mixture of acetonitrile and deionized water (20:80, volume ratio) containing 10 mmol/L HP-β-CD and 0.05% trifluoroacetic acid (pH 2.5, adjusted with triethylamine) with a flow rate of 1.0 mL/min. The ultraviolet (UV) detector is set at 254 nm. The likely roles are inclusion interaction, induction and hydrogen bonding between HP-β-CD and PSA enantiomers. Foundation item: Project(20776038) supported by the National Natural Science Foundation of China     

Production and characterization of alkaline extracellular lipase from newly isolated strain Aspergillus awamori HB-03

A strain HB-03 to produce alkaline extracellular lipase was isolated from oil-rich soil samples and identified as Aspergillus awamori.The growth conditions and nutritional factors for lipase production by strain HB-03 were optimized,and the maximum lipase production of (45.9±2.3) U/mL was obtained at 30 °C and pH 7.0 after 36 h using olive oil (1%) and sucrose (0.5%) as carbon sources and combination of peptone (2%),yeast extract (0.5%) and ammonium sulfate (0.1%) as nitrogen sources.The lipase was purified...     

Main influence factors on desulfurization of coal by sulfolobas

By orthodox experiment, the main influence factors of desulfurization by sul folobas of pH value, temperature, coal slurry concentration and coal granularity are studied in detail and the optimal experimental conditions were also obtained. The experimental results demonstrate that sul folobas being kind of linking-heat, acidophilic and self-supported bacterium with double characters can effectively remove inorganic and organic sulfur in coal. The superlatively desulfurization rate is up to 48.57% total sulfur and 41.71% inorganic sulfur within 10 d and its desulfurization rate can be greatly affected by the four factors above mentioned. Therefore, the optimum conditions of desulfurization are obtained by comprehensive experiment and they are as following: pH value 3, temperature 70°C, coal slurry concentration 10% and coal granularity 150 μm, respectively. Moreover, the repetition experimental results confirm that the desulfurization by sul folobas is steady. Foundation item: The National Advanced Technology Research and Development Project (863 Project 2002AA649220) Biography of the first author: HE De-wen, postdoctor, born in April 1968, majoring in solid waste pollution control and resource, environmental assessment and plan.     

Dynamic recrystallization behavior of 35CrMo structural steel

1　ＩＮＴＲＯＤＵＣＴＩＯＮＤｕｒｉｎｇｈｏｔｗｏｒｋｉｎｇ ,ｓｅｖｅｒａｌｍｅｔａｌｌｕｒｇｉｃａｌｐｈｅｎｏｍｅｎａｓｕｃｈａｓｗｏｒｋ ｈａｒｄｅｎｉｎｇ (ＷＨ ) ,ｄｙｎａｍｉｃｒｅｃｏｖｅｒｙ (ＤＲＶ) ,ａｎｄｄｙｎａｍｉｃｒｅ ｃｒｙｓｔａｌｌｉｚａｉｔｏｎ (ＤＲＸ )ｏｃｃｕｒｓｉｍｕｌｔａｎｅｏｕｓ ｌｙ[1 5 ] .Ｅｓｐｅｃｉａｌｌｙ ,ｔｈｅｏｃｃｕｒｒｅｎｃｅｏｆＤＲＸ ,ｃａｎｒｅｆｉｎｅｇｒａｉｎａｎｄｒｅｄｕｃｅｄｅｆｏｒｍａｔｉｏｎｒｅｓｉｓｔａｎｃｅｉｎｐｒａｃｔｉｃａｌｈｏｔ ｗ…     

Isolation and characterization of Acidithiobacillus caldus from several typical environments in China

Six strains of moderately thermophilic sulfur-oxidizing bacteria were isolated from several different typical environments in China. The identities of the isolates were confirmed by analyses of their 16S rRNA genes, and some key physiological traits. The isolates are Gram negative, rod-shaped bacteria, their optimal temperature and pH value for growth are 45-50 ℃ and 2.5-3.5 respectively. They are autotrophic and used＇elemental sulfur, sodium thiosulfate and potassium tetrathionate as electron donor, while a little glucose stimulated their growth. 16S rDNA sequences analysis reveals that the strains are phylogenetically clustered to Acidithiobacillus caldus.     

Parameter fitting of constitutive model and FEM analysis of solder joint thermal cycle reliability for lead-free solder Sn-3.5Ag

The experimental tests of tensile for lead-free solder Sn-3.5Ag were performed for the general work temperatures range from 11 to 90 °C and strain rate range from 5×10⁻⁵ to 2×10⁻² s⁻¹, and its stress—strain curves were compared to those of solder Sn-37Pb. The parameters in Anand model for solder Sn-3.5Ag were fitted based on experimental data and nonlinear fitting method, and its validity was checked by means of experimental data. Furthermore, the Anand model was used in the FEM analysis to evaluate solder joint thermal cycle reliability. The results show that solder Sn-3.5Ag has a better creep resistance than solder Sn-37Pb. The maximum stress is located at the upper right corner of the outmost solder joint from the symmetric center, and thermal fatigue life is predicted to be 3.796×10⁴ cycles under the calculated conditions. Foundation item: Project(50376076) supported by the National Natural Science Foundation of China     

Separation of baicalin from Scutellaria Baicalensis Georgi with polyamide

Separation of baicalin from Scutellaria Baicalensis Georgi with polyamide was studied. The adsorption isotherm, kinetic equation and desorption law were investigated by static and dynamic adsorption methods. The results show that the kinetic behavior is mainly controlled by the liquid film diffusion process and obeys the Boyd film diffusion equation. Equilibrium data for the adsorption of baicalin are correlated with Freundlich isotherm equation, i.e. q=3.8Ce2.057, suggesting that the relative capacity of polyamide to baicalin is somewhat small. The desorption results indicate that the baicalin with mass fraction of 33.86% and the least impurities can be obtained by chromatography using 60% ethanol as the eluant at room temperature.     

Removal of lead in wastewater by immobilized inactivated cells of Rhizopus oligosporus

A novel technology for lead removal with nonliving Rhizopus oligosporus immobilized in calcium alginate was studied. The results show that the main influencing factors include pH value and interfering cations. pH value has different effects on biosorption of various heavy metals and lead adsorption can be proceeded by controlling pH value in a range of 2-5; interfering cations especially Cu( Ⅱ ) can make the adsorption amount of Pb( Ⅱ ) decrease by immobilized Rhizopus oligosporus. Desorption efficiency of different eluants and kinetics were investigated. Citrate the reaction equilibrium reaches 3 h. Immobilized biomass keeps high lead biosorption capacity after five cycles of regeneration.     

Separation of xylo-oligosaccharides from enzymatic hydrolytes using membrane reactor

1　INTRODUCTIONMembranereactorsrepresentapromisingtech nologyforproductionandprocessinginthepharma ceuticalandfoodindustry .Theincreasingattentionto“natural like” productsandenviron mentalpro cessesmakesthemembranereactorsparticularlyat tractive,becausetheydonotrequirechemicaladdi tives ,areabletoworkundermildconditionsofpH ,temperature,and pressure ,andcanreducethefor mationofby products[1] .Thecatalyticactionofen zymesisextremelyefficientandselectivecomparedwithordinarychemicalcatalys…     

Hollow fiber liquid-supported membrane technology for enantioseparation of racemic salbutamol by combinatorial chiral selectors

Enantioseparation of salbutamol solute was carried out in liquid-supported membrane by using a polyvinylidene fluoride hollow-fiber module. The enantioselective transport of solute was facilitated by combinatorial chiral selectors, which were dissolved in toluene organic solvent. The effects of molar concentration ratios of salbutamol to combinatorial chiral selectors, and the pH value of buffer solution on enantioseparation were investigated. The results show that when the molar concentration ratio is 2 ： 1 ： 1, the maximum separation factor and enantiomer excess are 1.49 and 19.74%, respectively, and the R-enantiomer flux is more than S-enantiomer; the pH value of buffer solution influences the performances of enantioseparartion obviously, and the appropriate range of pH value is 7.0-7.2.