A true nanocomposite: Single crystalline Au nanoparticles on single crystalline Fe3O4 nanoparticles

An Au/Fe₃O₄ nanocomposite catalyst was fabricated through a simple deposition-precipitation method. The Au/Fe₃O₄ nanocomposite is a true nanocomposite that has single crystalline Au nanoparticles supported on single crystalline Fe₃O₄ nanoparticles. Lattice fringes from both Au and Fe₃O₄ single nanoparticles were simultaneously observed by transmission electron microscope (TEM). This nanocomposite catalyst showed much high activity in low temperature CO oxidation reaction. The Au/Fe₃O₄ nanocomposite catalyst reaches 100% CO conversion at 40 °C. In comparison, Au/commercial Fe₃O₄ catalyst needs 375 °C to convert CO. This Au/Fe₃O₄ nanocomposite is an ideal sample to study synergetic effect between the catalyst and the support at nanoscale.     

Microwave assisted fast fabrication of Fe3O4-MWCNTs nanocomposites and their application as MRI contrast agents

Uniform Fe₃O₄ nanoparticles with diameters of 3-5 nm are successfully decorated onto the external walls of multiwall carbon nanotubes (MWCNTs) by in situ high-temperature decomposition of Fe(acac)₃ in polyol solution under the irradiation of microwave. With this method, reaction time of forming Fe₃O₄-MWCNTs nanocomposites has been significantly shortened to 15 min. The resulting Fe₃O₄-MWCNTs nanocomposites show superparamagnetic property at room temperature and can be remained as stable aqueous dispersion for 2 months. Longitudinal relaxivity (r₁) and transverse relaxivity (r₂) of the magnetic MWCNTs are 8.34 Fe mM⁻¹ S⁻¹ and 146 Fe mM⁻¹ S⁻¹ respectively. The much higher r₂ value and the obvious change in the gray scale of MR images confer the Fe₃O₄-MWCNTs nanocomposites as potential candidates for T₂-weighted MRI contrast agents.     

Preparation of Fe3O4/PVA nanofibers via combining in-situ composite with electrospinning

A novel approach, combining in-situ composite method with electrospinning, was used to prepare high magnetic Fe₃O₄/poly(vinyl alcohol) (PVA) composite nanofibers. Fe₃O₄ magnetic fluids were synthesized by chemical co-precipitation method in the presence of 6 wt.% PVA aqueous solution. PVA was used as stabilizer and polymeric matrix. The resulting Fe₃O₄/PVA composite nanofibers were characterized with field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and X-ray diffractometer (XRD), respectively. These composite fibers showed a uniform and continuous morphology, with the Fe₃O₄ nanoparticles embedded in the fibers. Magnetization test confirmed that the composite fiber showed a high saturated magnetization (M_s = 2.42 emµ·g^-1) although only 4 wt.% content.     

Synthesis and spectroscopic investigations of Mn3O4 nanoparticles

Trimanganese tetraoxide (Mn₃O₄) nanoparticles have been synthesized via hydrothermal process. Nevertheless, homogeneous nanoparticles of Mn₃O₄ with platelet lozange shape were obtained. The crystallite size ranged from 40 to 70 nm. The Mn₃O₄ product was investigated by X-ray diffraction, transmission electron microscopy (MET), and impedance spectroscopy. Electrical conductivity measurements showed that the as-synthesized Mn₃O₄ nanomaterial has a conductivity value which goes from 1.8 10⁻⁷ Ω⁻¹ cm⁻¹ at 298 K, to 23 10⁻⁵ Ω⁻¹ cm⁻¹ at 493 K. The temperature dependence of the conductivity between 298 and 493 K obeys to Arrhenius law with an activation energy of 0.48 eV.     

Fabrication and photocatalytic activity of YMn2O5 nanoparticles

In this work, a polyacrylamide gel route is introduced to synthesize YMn₂O₅ nanoparticles. It is demonstrated that high-quality YMn₂O₅ nanoparticles with a uniform size and spherical shape can be prepared using different chelating agents. However, the average particle size of the products is found to have a dependence on the choice of the chelating agent. The sample prepared using citric acid as the chelating agent has an average particle size of ~ 45 nm, while the sample prepared by using the chelating agent EDTA has a particle size centered around 70 nm. The optical energy bandgap of the citric acid- and EDTA-resulted samples is obtained, from optical absorption measurements, to be 1.21 and 1.17 eV, respectively. The photocatalytic experiments reveal that the as-prepared YMn₂O₅ nanoparticles exhibit an interesting photocatalytic activity for oxidative decomposition of methyl red under ultraviolet and visible-light irradiation.     

Syntheses of Mn3O4 and LiMn2O4 nanoparticles by a simple sonochemical method

Mn₃O₄ and LiMn₂O₄ nanoparticles were prepared by a simple sonochemical method which is environmentally benign. First, Mn₃O₄ nanoparticles were prepared by reacting MnCl₂ and NaOH in water at room temperature through a sonochemical method, operated at 20 kHz and 220 W for 20 min. Second, LiOH was coated onto the resulting Mn₃O₄ under the same sonochemical conditions as above. The thickness of coated LiOH on Mn₃O₄ obtained from the reaction ratio of 3:1 between LiOH and Mn₃O₄ was about 4.5–5.5 nm range. Then, by heating those LiOH-coated Mn₃O₄ particles at the relatively low temperature of 300–500 °C for 1 h, they were transformed into phase-pure LiMn₂O₄ nanoparticles of about 50 to 70 nm size in diameter.     

Self-controlled growth of Fe3BO6 crystallites in shape of nanorods from iron-borate glass of small templates

Fe₃BO₆ can be an ideal compound for devising functional magnetic and dielectric properties in a single material for multiple applications such as electrodes, gas sensors, or medical tools. Useful to tailor such properties, here we report on a self-controlled Fe₃BO₆ growth in a specific shape of nanorods from a supercooled liquid precursor (an inorganic polymeric liquid or glass) of an initial composition (100 − x)B₂O₃ − xFe₂O₃, x = 40–50 mol%. B₂O₃ as a strong glass former co-bridges the Fe³⁺ ions in oxygen polygons primarily in a 2-D interconnected polymer network so that it dictates preferably a 1-D directional growth on the reaction Fe³⁺ species in form of a compound Fe₃BO₆, a favorable phase to nucleate and grow when annealing a precursor at 500–800 °C in ambient air. Distinct nanorods with a diameter ∼200 nm and 40–100 μm length have been formed on 10–15 min annealing a sample in microwave at moderate temperature 550 °C. A bonded surface B₂O₃ layer (15–25 nm thickness) has grown on the Fe₃BO₆ of the nanorods in situ in a specific structure. XPS bands in the Fe³⁺, B³⁺ and O²⁻ species confer this model structure. A local BO₃ → BO₄ conversion has incurred in the boroxol (B₃O_4.5)_n, n → ∞, rings in the surface layer, showing three distinct IR bands at 1035, 1215 and 1425 cm⁻¹.     

Synthesis of Co3O4 nanoparticles via the CTAB-assisted method

Cobalt oxide (Co₃O₄) nanoparticles were successfully synthesized by the cetyltrimethylammonium bromide (CTAB)-assisted method at normal pressure for the first time. The structure and morphology of the as-prepared Co₃O₄ nanoparticles were characterized by powder X-ray diffracton (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and N₂-sorption analysis. XRD studies indicated that the as-prepared product was well-crystallized cubic phase of Co₃O₄ with a cell constant of α = 8.0722 Å. The EM images showed that the obtained Co₃O₄ sample consisted of dispersive quasi-spherical particles with the size ranged from 15 to 25 nm.     

Facile synthesis and electrochemical properties of Mn3O4 nanoparticles with a large surface area

Mn₃O₄ nanoparticles were prepared by a novel oxidation-precipitation method at a low temperature. The crystal phase, microstructure, surface area and electrochemical properties of the products were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), N₂ adsorption-desorption isotherms and cyclic voltammetry (CV). The results indicate that the addition of citric acid and tartaric acid remarkably reduced the particle size and increased the specific surface area of Mn₃O₄ nanoparticles. The samples prepared by the addition of citric acid and tartaric acid have a narrow particle size distribution of 5-10 nm, a surface area of 119 and 122 m²/g, and a capacitance of 171 and 172 F g⁻¹, respectively.     

Electronic structure and photoluminescence properties of Eu-activated Ca4Si2O7F2

The blue-emitting phosphors Ca_(4−x)Eu_xSi₂O₇F₂ (0 < x ? 0.05) have been prepared by solid-state reaction and the photoluminescence properties have been studied systematically. The electronic structure of calcium fluoride silicate Ca₄Si₂O₇F₂ was calculated using the CASTEP code. The calculation results of electronic structure show that Ca₄Si₂O₇F₂ has an indirect band gap with 5 eV. The top of the valence band is dominated by O 2p and Si 3p states, while the bottom of the conduction band is mainly composed of Ca 3d states. Under the 350 nm excitation, the obtained sample shows a broad emission band in the wavelength range of 400-500 nm with peaks of 413 nm and 460 nm from two different luminescence centers, respectively. The relative intensity of the two peaks changes with the alteration of the Eu²⁺ concentration. The strong excitation bands of the powder in the wavelength range of 200-420 nm are favorable properties for the application as lighting-emitting-diode conversion phosphor.     

Preparation and characterization of bio-functionalized iron oxide nanoparticles for biomedical application

Amine modified iron oxide (Fe₃O₄) nanoparticles were synthesized by thermal decomposition method and were further used to bio-functionalize by grafting of N-hydroxysuccinimide (NHS) ester of folate and ethylenediaminetetraacetate (EDTA). Fe₃O₄ nanoparticles of ~ 22 nm were confirmed from X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies. FT-IR studies indicated two bands at 1515 cm^− 1and 1646 cm^− 1, which can be attributed to carboxylic group and the amide linkage respectively, revealing the conjugation of folate with Fe₃O₄. The conjugation of the chelating agent showed strong C=O stretch and Fe-O vibrations at 1647 and 588 cm^− 1 respectively. The value of saturation magnetization for Fe₃O₄ nanoparticles was found to be 88 emu/g, which further reduced to 18 and 32% upon functionalization with EDTA and NHS ester folate, respectively. These amine modified Fe₃O₄ nanoparticles can also be functionalized with other bifunctional chelators, such as amino acids based diethylene triamine pentaacetic acid (DTPA), and thus find potential applications in radio-labeling, biosensors and cancer detection, etc.     

Characteristic analysis of Fe3O4 nanoparticles modified by oleic acid and undecylenic acid

Carbonization of magnetic polymer microspheres is one of the methods for the preparation of magnetic carbon materials. Fe₃O₄ magnetic particle characteristics considerably influence the magnetic content and size distribution of magnetic polymer microspheres. The characteristics of Fe₃O₄ nanoparticles modified by oleic acid (OA) and undecylenic acid (UA) were analyzed by X-ray diffraction, Fourier transform infrared, scanning electron microscopy, dynamic laser light scattering, thermogravimetry/differential thermogravimetry, vibrating sample magnetometer, and water contact angle. Fe₃O₄ nanoparticles modified by OA and UA are nearly spherical and exhibit superparamagnetism. Fe₃O₄ particle size and saturation magnetization are slightly influenced by the OA and UA composition. OA and UA both are chemically adsorbed onto Fe₃O₄ as bidentate chelates. OA shows easier adsorption onto Fe₃O₄ than UA. OA groups have an expanded arrangement on OA@Fe₃O₄, whereas UA groups have a condensed arrangement on UA@Fe₃O₄. Particle lipophilicity decreases and particle clustering increases with decreasing OA content and increasing UA content on OA-UA@Fe₃O₄ nanoparticles.     

A new method for surface modification of TiO2/Al2O3 nanocomposites with enhanced anti-friction properties

In this paper, the TiO₂/Al₂O₃ composite nanoparticles were prepared by a hydrothermal method and in situ modified with acrylic acid. It was found that the mean particle size of modified TiO₂/Al₂O₃ composite nanoparticles was about 80 nm with a uniform distribution by the particle size analysis. The modified TiO₂/Al₂O₃ composite nanoparticles can disperse in lubricating oil homogenously for several weeks. The dispersion stabilization of modified TiO₂/Al₂O₃ composite nanoparticles in lubricating oil was significantly improved in comparison with the as-prepared nanoparticles, which was due to the introduction of grafted polymers by surface modification. The formation of covalent bands was identified by Fourier transform infrared spectrum. Under an optimized concentration of 0.1 wt%, the averaged friction coefficient was reduced by 14.75%, when the modified TiO₂/Al₂O₃ composite nanoparticles were used as lubricating oil additivities.     

Observation of broadband infrared luminescence in a novel Bi-doped P2O5-B2O3-Al2O3 glass

A novel Bi-doped P₂O₅-B₂O₃-Al₂O₃ glass was investigated, and strong broadband NIR (near infrared) luminescence was observed when the sample was excited by 445 nm, 532 nm, 808 nm and 980 nm lasers, respectively. The max FWHM with 312 nm, the lifetime with 580 μs and the σ_emτ product with 5.3 × 10^− 24 cm² s were obtained which indicates that this glass is a promising material for broadband optical amplifier and tunable laser. The effect of the introduction of B₂O₃ on the glass structure and Bi-ions illuminant mechanism were discussed and analyzed. It is suggested that the introduction of B₂O₃ makes the glass structure closer, and the broadband NIR emission derives from Bi⁰:²D_3/2 → ⁴S_3/2 and Bi⁺:³P₁ → ³P₀ transitions.     

Interphase synthesis of Fe3O4/CdS core-shell nanoparticles

CdS and Fe₃O₄/CdS core-shell nanoparticles were synthesized by a simple interphase method. The obtained nanoparticles were characterized by TEM, XRD and spectroscopy techniques (fluorescence and UV-vis absorption). The effects of reagent concentration on the properties of obtained nanoparticles were investigated. It was shown that the UV-vis spectra of the Fe₃O₄/CdS colloidal toluene solutions have the sharp edge at 311 nm and the long tail. The broad emission bands in the photoluminescence spectra of the Fe₃O₄/CdS organosols observed at 506, 560 and 568 nm with the increasing of cadmium oleate concentration. The thickness of CdS shell was ranged from 0.2 to 1.0 nm while the average size of the magnetite core is about 9.9 nm.     

Magnetic monolayer film of oleic acid-stabilized Fe3O4 particles fabricated via Langmuir-Blodgett technique

The fabrication of monolayer film of surfactant-stabilized magnetic Fe₃O₄ particles with a size range of 90–150 nm via the Langmuir-Blodgett method is described in this paper. Magnetic Fe₃O₄ particles coated with oleic acid were firstly synthesized by a hydrothermal process, and then the particles were dispersed into chloroform. After that, the Fe₃O₄ suspension was spread to the interface of air/water and transferred to the glass surface. The formation of the Langmuir monolayer of oleic acid-stabilized Fe₃O₄ particles at air/water interface was revealed with the pressure-area isotherm curves. The results of the surface pressure-area isotherm and Atomic Force Microscopy showed that this film is a well compressed monolayer of 2-dimensional Fe₃O₄ particles assembly. Magnetometry results showed that the saturation magnetization of Fe₃O₄ magnetic particles is 86.1 A·m²/kg at room temperature with an applied field of 0.6 T.     

Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation

The aim of this study is to develop a new method for the preparation of high-value, environmentally friendly products from tailings. Magnetic Fe₃O₄ nano-powder was synthesized by ultrasonic-assisted chemical co-precipitation utilizing high purity iron separated from iron ore tailings by acidic leaching method. Magnetite particles with 15 nm average diameter were characterized by X-ray diffraction, field-emission scanning electron microscopy and vibrating sample magnetometer. Surfactant influence on particles shape and size was investigated. Fe₃O₄ nanoparticles coated with C₁₂H₂₅OSO₃Na exhibit better dispersion and uniform size. The product consisted of ferrous ferrite (Fe3O4) nanosized cubic particles with a high level of crystallinity and exhibit super-paramagnetism based on magnetization curves lacking hysteresis.     

Effect of chromium substitution on structure and magnetic properties of Bi2Fe4O9

Orthorhombic Bi₂Fe_4 − xCr_xO₉ (x = 0.0, 0.25, and 0.75) nanoplatelets were synthesized by a simple hydrothermal method. The structure, morphology, and magnetic properties of the obtained powders have been characterized. Calculation of the lattice parameters of Bi₂Fe_4 − xCr_xO₉, as well as bond lengths and angles, was carried out by X-ray diffraction Rietveld refinement. The volumes of the metal-oxygen tetrahedra and octahedra were calculated to be sequentially increasing as the Cr doping level increases. The samples undergo an antiferromagnetic transition at 250 ± 5 K. The magnetic moments of the samples increase with higher Cr doping level. The 3d electron spin state for Fe³⁺ in the as-prepared samples is different, which is possibly due to the distortion of Fe-O tetrahedra and octahedra in the crystal structure after chromium substitution.     

Polyaniline/Fe3O4 nanocomposites synthesized under the direction of cationic surfactant

Polyaniline(PANi)/Fe₃O₄ nanocomposites have been prepared via in situ chemical oxidative polymerization directed with cationic surfactant cetyltrimethylammonium bromide (CTAB). The studies show that PANi can coat Fe₃O₄ nanoparticles. CTAB can produce insoluble substance with initiator of polyreaction, and plays a very important role for the coating of Fe₃O₄ nanoparticles by PANi. Many Fe₃O₄ nanoparticles are bald without being coated by PANi when CTAB is replaced by anionic surfactant, so anionic surfactant can not play the role of CTAB.     

Sr3.5Mg0.5Si3O8Cl4: Eu bluish-green-emitting phosphor for NUV-based LED

Sr₄Si₃O₈Cl₄:Eu²⁺ and Sr_3.5Mg_0.5Si₃O₈Cl₄:Eu²⁺ phosphors were prepared by a conventional solid state reaction (SS). Excited by 370 nm near-ultraviolet light, the phosphors show an efficient bluish-green wide-band emission centering at 484 nm, which originates from the 4f5d¹ → 4f⁷ transition of Eu²⁺ ion. The excitation spectra of the phosphors are a broad band extending from 250 nm to 400 nm. Mg²⁺-codoping greatly enhances the bluish-green emission of the phosphors. An LED was fabricated by coating the Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ phosphor onto an ~ 370 nm-emitting InGaN chip. The LED exhibits bright bluish-green emission under a forward bias of 20 mA. The results indicate that Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ is a candidate as a bluish-green component for fabrication of NUV-based white LEDs.