A novel route for the synthesis of poly(2‐hydroxyethyl methacrylate) grafted TiO2 nanoparticles via surface thiol‐lactam initiated radical polymerization

Hybrid nanocomposites of poly(2‐hydroxyethyl methacrylate) (PHEMA) and TiO₂ nanoparticles were synthesized via surface thiol‐lactam initiated radical polymerization by following the grafting from strategy. Initially, TiO₂ nanoparticles were modified by 3‐mercaptopropyl trimethoxysilane to prepare thiol functionalized TiO₂ nanoparticles (TiO₂? SH). Subsequently, surface initiated polymerization of 2‐hydroxyethyl methacrylate was conducted by using TiO₂? SH and butyrolactam as an initiating system. The anchoring of PHEMA onto the surface of TiO₂ nanoparticles was investigated by FTIR, ¹H‐NMR, XPS, TGA, and XRD analyses. The experimental results indicated a strong interaction between PHEMA and TiO₂ nanoparticles owing to covalent bonding. The TEM and SEM images of PHEMA‐g‐TiO₂ showed that the agglomeration propensity of TiO₂ nanoparticles was significantly reduced upon the PHEMA functionalization. The molecular weight and polydispersity index of the cleaved PHEMA from the surface of TiO₂ nanocomposites were estimated by GPC analysis. An improved thermal property of the nanocomposites was observed from TGA analysis. PHEMA‐g‐TiO₂ nanocomposites were found to be highly dispersible in organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(methyl methacrylate) nanoparticles by emulsifier‐free emulsion polymerization with a redox‐initiated system

In this study, the emulsifier‐free emulsion polymerization of methyl methacrylate (MMA) was initiated directly by a Cu²⁺/HSO redox system. Latex particles with negative charge due to the bonded anionic sulfite ion were successfully synthesized after 2 h of reaction at 40–60°C. Scanning electron microscopy pictures showed a uniform particle size distribution, and the average size decreased from 223 to 165 nm wit increasing reaction temperature from 40 to 60°C. The initiation step in the polymerization mechanism was proven to be a redox reaction, in which Cu²⁺ oxidized the bisulfite ion to produce an anionic sulfite radical and proton. The produced anionic sulfite radical then initiated the polymerization of MMA. Moreover, Cu²⁺ not only served as one component in the redox initiator system but also as a chain‐transfer agent that terminated growing polymer chains to produce chains with unsaturated end groups [poly(methyl methacrylate) (PMMA)? CH?CH₂]. For this system, about 17% PMMA? CH?CH₂ was produced. The tacticities of the PMMA latex prepared at 40–60°C were almost the same, about 62–64% syndiotactic, 33–35% heterotactic, and 3% isotactic. These PMMA latexes had almost the same glass‐transition temperature, 125–127°C, regardless of the reaction temperatures, and their weight‐average molecular weights were in the range between 254,000 and 315,000. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Grafting of sulfonated monomer onto an amino‐silane functionalized 2‐aminoterephthalate metal − organic framework via surface‐initiated redox polymerization: proton‐conducting solid electrolytes

A post‐polymerization method for metal–organic frameworks (MOFs) has been developed to produce super‐acidic solid nanoparticles. Thus, the NH₂MIL‐53(Al) MOF was functionalized with (3‐aminopropyl)triethoxysilane (APTES) from amine groups to yield active site anchored MOF nanoparticles. Then, sulfonated polymer/MOF hybrid nanoparticles were prepared by redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (MOF‐g‐PAMPS), initiated onto the surfaces of aminopropyl‐functionalized NH₂MIL‐53(Al) nanoparticles. The synthesis and modification of NH₂MIL‐53(Al) nanoparticles were characterized by Fourier transform infrared (FTIR) spectroscopy and TGA. FTIR and TGA results indicated that APTES modifier agent and AMPS monomer were successfully grafted onto the MOF nanoparticles. The grafting efficiency of PAMPS polymer onto the MOF nanoparticles was estimated from TGA thermograms to be 33%. Also, sulfonated polymer/MOF hybrid nanoparticles showed a proton conductivity as high as 4.9 × 10^?5 S cm^?1. Nitrogen adsorption of modified NH₂MIL‐53(Al) showed also a decrease in pore volume. The morphology and crystalline structure of MOF nanoparticles before and after the modification processes were studied by SEM and XRD, respectively. © 2015 Society of Chemical Industry     

Synthesis of PMMA‐PTHF‐PMMA and PMMA‐PTHF‐PST linear and star block copolymers

Combination of cationic, redox free radical, and thermal free radical polymerizations was performed to obtain linear and star polytetramethylene oxide (poly‐THF)‐polymethyl methacrylate (PMMA)/polystyrene (PSt) multiblock copolymers. Cationic polymerization of THF was initiated by the mixture of AgSbF₆ and bis(4,4′ bromo‐methyl benzoyl) peroxide (BBP) or bis (3,5,3′,5′ dibromomethyl benzoyl) peroxide (BDBP) at 20°C to obtain linear and star poly‐THF initiators with M_w varying from 7,500 to 59,000 Da. Poly‐THF samples with hydroxyl ends were used in the methyl methacrylate (MMA) polymerization in the presence of Ce(IV) salt at 40°C to obtain poly(THF‐b‐MMA) block copolymers containing the peroxide group in the middle. Poly(MMA‐b‐THF) linear and star block copolymers having the peroxide group in the chain were used in the polymerization of methyl methacrylate (MMA) and styrene (St) at 80°C to obtain PMMA‐b‐PTHF‐b‐PMMA and PMMA‐b‐PTHF‐b‐PSt linear and star multiblock copolymers. Polymers obtained were characterizated by GPC, FT‐IR, DSC, TGA, ¹H‐NMR, and ¹³C‐NMR techniques and the fractional precipitation method. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 219–226, 2004     

Novel comb‐structured‐polymer‐grafted carbon black by surface‐initiated atom transfer radical polymerization and ring‐opening polymerization

Novel comb‐structured‐polymer‐grafted carbon black (CB) was synthesized with a combination of surface‐initiated atom transfer radical polymerization and ring‐opening polymerization. First, poly(2‐hydroxyethyl methacrylate) (PHEMA) was grafted onto the CB surface by surface‐initiated atom transfer radical polymerization. The prepared CB‐g‐PHEMA contained 35.6–71.8% PHEMA, with the percentage depending on the molar ratio of the reagents and the reaction temperature. Then, with PHEMA in CB‐g‐PHEMA as the macroinitiator, poly(?‐caprolactone) (PCL) was grown from the CB‐g‐PHEMA surface by ring‐opening polymerization in the presence of stannous octoate. CB‐g‐PHEMA and CB‐g‐(PHEMA‐g‐PCL) were characterized with Fourier transform infrared, ¹H‐NMR, thermogravimetric analysis, dynamic light scattering, and transmission electron microscopy. The resultant grafted CB had a shell of PHEMA‐g‐PCL. On the whole, the CB nanoparticles were oriented in dendritic lamellae formed by these shells. This hopefully will result in applications in gas sensor materials and nanoparticle patterns. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Graft copolymerization of methyl methacrylate onto rubber‐wood fiber using H2O2 and Fe2+ as an initiator system

Methyl methacrylate (MMA) was successfully grafted onto rubber‐wood fiber in a free‐radical solution polymerization initiated by ferrous ion and hydrogen peroxide. The effects of the reaction parameters (reaction temperature, reaction period, influence of hydrogen peroxide, ferrous ammonium sulfate, and monomer concentrations) were investigated. The grafting percentage showed dependency on H₂O₂, Fe²⁺, and monomer concentrations, as well as reaction temperature and reaction period. The optimum reaction temperature was determined to be about 60°C and the reaction period was 60 min. The optimum concentration of H₂O₂ was 0.03M and optimum amounts of Fe²⁺ and MMA were 0.26 mmol and 2.36 × 10^?2 mol, respectively. Poly(methyl methacrylate) (PMMA) homopolymer was removed from the graft copolymer by Soxhlet extractor using acetone. The presence of PMMA on the fiber was shown by FT‐IR spectroscopy and gravimetric analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2499–2503, 2003     

Surface‐initiated atom transfer radical polymerization from Mg(OH)2 nanoparticles to prepare the well‐defined polymer‐Mg(OH)2 nanocomposites

Well‐defined polymer‐Mg(OH)₂ nanocomposites were prepared by atom transfer radical polymerization (ATRP). The ATRP initiators were covalently attached to the Mg(OH)₂ by esterification of 2‐chloropropionyl chloride with hydroxyl group. The amount of polymer grafted from Mg(OH)₂ can be controlled using a different catalyst system and adding a small amount of polar solvent. The well‐defined diblock copolymer, consisting of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) were synthesized. The products were characterized by nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermal gravimetric analysis. The morphologies of PS/PMMA and PS/PMMA/Mg(OH)₂‐g‐PS‐b‐PMMA blends are compared by using a scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3680–3687, 2007     

The synthesis of PHA‐g‐(PTHF‐b‐PMMA) multiblock/graft copolymers by combination of cationic and radical polymerization

A new and promising method for the diversification of microbial polyesters based on chemical modifications is introduced. Poly(3‐hydroxy alkanoate)‐g‐(poly(tetrahydrofuran)‐b‐poly(methyl methacrylate)) (PHA‐g‐(PTHF‐b‐PMMA)) multigraft copolymers were synthesized by the combination of cationic and free radical polymerization. PHA‐g‐PTHF graft copolymer was obtained by the cationic polymerization of THF initiated by the carbonium cations generated from the chlorinated PHAs, poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV), and poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) in the presence of AgSbF₆. Therefore, PHA‐g‐PTHF graft copolymers with hydroxyl ends were produced. In the presence of Ce⁺⁴ salt, these hydroxyl ends of the graft copolymer can initiate the redox polymerization of MMA to obtain PHA‐g‐(PTHF‐b‐PMMA) multigraft copolymer. Polymers obtained were purified by fractional precipitation. In this manner, their γ‐values (volume ratio of nonsolvent to the solvent) were also determined. Their molecular weights were determined by GPC technique. The structures were elucidated using ¹H‐NMR and FTIR spectroscopy. Thermal analyses of the products were carried out using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of titanium dioxide (TiO2) distribution and minute amounts of carbon black on the opacity of PVDF based white composite films

There is a contradiction in making completely opaque and white plastic film with a required high TiO₂ filling fraction, which resulted in inefficient pigment utilization and high cost. Two methods were used here to overcome the contradiction. Firstly, TiO₂ was grafted with poly(methyl methacrylate) (PMMA) by atom transfer radical polymerization to improve the pigment dispersion in poly(vinylidene) fluoride (PVDF). Secondly, minute amounts of carbon black (CB) were added into the PMMA‐g‐TiO₂/PVDF system to enhance opacity and decrease TiO₂ fraction. The structure, morphology, and properties of PMMA‐g‐TiO₂ hybrid particles and composite films were investigated by FTIR, TEM, TGA, SEM, DMA, covering power meter, and UV/VIS spectrophotometer, etc. It was observed that PMMA‐g‐TiO₂ was dispersed uniformly as individual particles in PVDF due to the good compatibility between PMMA and PVDF. Therefore, the opacity of PMMA‐g‐TiO₂/PVDF films was markedly higher than unmodified‐TiO₂/PVDF ones. Adding minute amounts of CB can significantly increase the opacity of the thin film due to its absorption effect on decreasing light transmittance. The contrast ratio (CR) of the PMMA‐g‐TiO₂/PVDF film with 20 μm thickness and 25 vol % TiO₂ was 97.67%, lower than the critical CR 98% for a complete opacity, however, the CR of sample with 10 vol % TiO₂ was 98.1% as the CB concentration was 2 × 10^?4 g/cm³, saved more than 15% TiO₂. We proposed that a critical thickness d₀ existed for the CB/PMMA‐g‐TiO₂/PVDF composite films, under which the light reflectance increased as a function of thickness, otherwise, the reflectance kept constant. Besides, d₀ could be decreased by increasing CB concentration. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43064.     

Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Photo‐Induced atom transfer radical polymerization with nanosized α‐Fe2O3 as photoinitiator

Photo‐induced atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was achieved in poly(ethylene glycol)‐400 with nanosized α‐Fe₂O₃ as photoinitiator. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in conjunction with ethyl 2‐bromoisobutyrate (EBiB) as ATRP initiator and FeCl₃·6H₂O/Triphenylphosphine (PPh₃) as complex catalyst. The photo‐induced polymerization of MMA proceeded in a controlled/living fashion. The polymerization followed first‐order kinetics. The obtained PMMA had moderately controlled number‐average molecular weights in accordance with the theoretical number‐average molecular weights, as well as narrow molecular weight distributions (M_w/M_n). In addition, the polymerization could be well controlled by periodic light‐on–off processes. The resulting PMMA was characterized by ¹H nuclear magnetic resonance and gel permeation chromatography. The brominated PMMA was used further as macroinitiator in the chain‐extension with MMA to verify the living nature of photo‐induced ATRP of MMA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42389.     

Gelatin‐g‐poly(methyl methacrylate)/silver nanoparticle hybrid films and the evaluation of their antibacterial activity

We designed and prepared novel hybrid films of nanoparticles consisting of gelatin‐g‐poly(methyl methacrylate) (PMMA)/silver (Ag) polymers with ordered nanoporous, higher antibacterial activities. First, the gelatin‐grafted PMMA microspheres were fabricated with the in situ copolymerization of gelatin and alkenes under radical initiation, which acted as a stabilizer and regulator for Ag nanoparticle growth. Then, silver nitrate was entrapped in a copolymerization system at 40°C for 30 min. Finally, the gelatin‐g‐PMMA/Ag polymer hybrid films were prepared by the reduction of Ag⁺ with hydrazine, followed by emulsion solidification. The antibacterial activities of the gelatin‐g‐PMMA/Ag polymer hybrid films against Escherichia coli and Staphylococcus aureus were found with the disc diffusion method and colony count assays to be clear and lasting. In this study, our work not only presented a good example of a nanoporous antibacterial film material but also provided a facile method for making use of gelatin and metal/inorganic self‐assemble properties in graft copolymerization to prepare functional polymer hybrids, such as antibacterial, antithrombogenic, and dot‐quantum effect materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermal degradation behavior of PMMA synthesized by emulsifier‐free emulsion polymerization with a Cu2+/HSO3− redox system

In this study, poly(methyl methacrylate) (PMMA) latex was synthesized in an emulsifier‐free emulsion polymerization at 60°C using a Cu²⁺/HSO redox initiator system with different concentrations of Cu²⁺. The experimental results showed that the monomer conversion reached above 90% for all systems. Zeta potential was all negative due to the bonded bisulfite ion and the magnitude was greater than 30 mV, providing the stability of PMMA emulsion. The morphology of the latex observed by scanning electron microscope revealed a uniform particle size, and the average particle size increased from 181.9 to 234.2 nm as the Cu²⁺ ion concentration increased from 2.0 to 6.0 mM in 1M of MMA solution. Thermal degradation behavior of synthesized PMMA was studied by thermogravimetric analysis, in which a two‐stage degradation behavior was observed. These two stages were found to be caused by the degradation of unsaturated end group (PMMA? CR?CH₂) and saturated end group (PMMA? H), respectively. In addition, the higher the concentration of Cu²⁺ ion, the greater the proportion of PMMA? CR?CH₂ in the final product, and in turn rendering more weight loss in the first‐stage degradation. The copper ion not only played a role in the redox initiation, but also acted as a chain transfer agent to terminate growing polymer chains, thus producing PMMA? CR?CH₂. The apparent activation energies of the first stage (E_a1) and second stage (E_a2) were calculated by Ozawa's and Boswell's method. The results showed that E_a1, representing the degradation of PMMA‐CR?CH₂, was lower than E_a2 for the degradation of PMMA‐H. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Grafting of water‐soluble sulfonated monomers onto functionalized fumed silica nanoparticles via surface‐initiated redox polymerization in aqueous medium

Sulfonated polymer/fumed silica hybrid nanoparticles were prepared via surface‐initiated free radical polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (PAMPS‐g‐FSN), styrene sulfonic acid sodium salt (PSSA‐g‐FSN) and vinyl sulfonic acid sodium salt (PVSA‐g‐FSN) from the surface of aminopropyl‐functionalized fumed silica nanoparticles (AFSNs) dispersed in aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer respectively. AFSNs were prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of fumed silica nanoparticles. Sulfonated monomers (AMPS, SSA or VSA) were then grafted onto the AFSNs ultrasonically dispersed in water via redox initiation at 40 °C. Structure, thermal properties, particle size and morphology of the AFSNs and PAMPS‐g‐FSN, PSSA‐g‐FSN and PVSA‐g‐FSN hybrid nanoparticles were characterized by Fourier transform infrared spectroscopy, TGA, SEM, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The results indicated that the sulfonated monomers were successfully grafted onto the fumed silica nanoparticles. Grafting amounts of the sulfonated polymers onto the fumed silica nanoparticle surface were estimated from TGA thermograms to be 59%, 13% and 29% for the PAMPS, PSSA and PVSA, respectively. From SEM, TEM and DLS analysis, polymer‐grafted fumed silica nanoparticles with an average diameter smaller than 70 nm and a (semi‐) spherical shape were observed. A significant bimodal particle size distribution was observed only for the PAMPS‐g‐FSN with average diameters of 39.6 nm (84.1% per number) and 106 nm (15.9% per number). The hydrophilic sulfonated polymer/grafted fumed silica obtained from the redox graft polymerization gave a stable colloidal dispersion in acidic aqueous medium. Copyright © 2012 Society of Chemical Industry     

Structural estimation of particle arrays at air–water interface based on silica particles with well‐defined and highly grafted poly(methyl methacrylate)

Silica nanoparticles with well‐defined, highly grafted dense poly(methyl methacrylate) (MMA) were prepared by surface‐initiated activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) of methyl methacrylate with an initiator‐fixed silica particle in the presence of air. Two different polymerizations of MMA were carried out under the same conditions using tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) and N,N,N′,N′,N″‐pentamethyldiethylene‐triamine (PMDETA) as the ligand, respectively. In the CuCl₂/PMDETA system, polymerization appeared to be more controlled with a lower polydisperisty compared with the CuCl₂/Me₆TREN system. The monolayer of these particles was formed at the air–water interface using Langmuir‐Blodgett (LB) technique. Multilayers of the particles were fabricated by repetition of LB depositing. A surface pressure–area (π–A) measurement and SEM observation were used to characterize the particle arrays. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Preparation and characterization of transparent and foldable polysiloxane‐poly(methyl methacrylate) membrane with a high refractive index

In this article, carbazole‐grafted methacrylic polysiloxane (MA‐CZ‐PDMS) macromonomer was synthesized and its structure was confirmed by proton nuclear magnetic resonance (¹H NMR). The polysiloxane macromonomer can homogeneously copolymerize with methyl methacrylate (MMA) to prepare transparent and foldable carbazole‐grafted polysiloxane‐poly(methyl methacrylate) (PDMS‐PMMA) membranes with a high refractive index (RI). The membranes were characterized by light transmittance, RI value, and dynamic mechanical thermal analysis (DMTA). The results indicated that the carbazole‐grafted PDMS‐PMMA membranes had excellent light transmittance that decreased slightly with increasing carbazole‐grafted polysiloxane content. Incorporation of carbazole‐grafted polysiloxane in the materials improved its RI value; however decreased the glass transmission temperature (T_g) that can be adjusted to less than 30°C, enable the membrane foldable at room temperature. The data demonstrate that the carbazole‐grafted PDMS‐PMMA membranes have a potential application as high RI intraocular lens (IOL) suitable for implantation by minimally invasive surgery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42491.     

Synthesis of polymer–inorganic hybrid nanoparticles via radical polymerization initiated by surface‐immobilized photoiniferter

Polymer–inorganic hybrid nanoparticles were prepared through radical photo‐polymerization of methyl methacrylate initiated by N,N‐diethyldithiocarbamyl surface functionalized silica nanoparticles under UV irradiation at ambient temperature. IR analysis and UV spectroscopy confirmed the occurrence of Et₂NCS₂—end groups on the resulting poly(methyl methacrylate), and the morphology of these hybrid nanoparticles was observed directly by means of tapping mode atomic force microscopy (AFM). Copyright © 2003 Society of Chemical Industry     

Synthesis of novel high oil‐absorption resins of poly(methyl methacrylate–butyl methacrylate) by surface‐initiated atom transfer radical polymerization using activators regenerated by electron transfer for efficient removal of oil

Oil‐absorption resins are considered one of the effective materials to separate organic chemical compounds from oily water. In this work, well‐defined high oil‐absorption resins of poly(methyl methacrylate–butyl methacrylate) grafted onto silica gel were prepared by surface‐initiated atom transfer radical polymerization using activators regenerated by electron transfer mediated by FeCl₃/iminodiacetic acid. The grafted polymers were grown in a controlled manner. By considering the effect of different polymerization conditions, we prepared novel high oil‐absorption resins. The chemical structures of the resins were determined by Fourier transform IR spectroscopy. SEM and TGA were also used to characterize the resins. It was found that the resins had good heat‐resistant quality, higher oil absorbency and better oil retention and regeneration properties. The resins can absorb 31.2 g g^?1 for tricholoromethane and 23.3 g g^?1 for toluene. Copyright © 2012 Society of Chemical Industry     

Synthesis,physical properties,and characterization of starch‐based blend films by adding nano‐sized TiO2/poly(methyl metacrylate‐co‐acrylamide)

The purpose of this study was to improve the physical properties and to expand the application range of starch‐based blend films added nano‐sized TiO₂/poly(methyl methacrylate‐co‐acrylamide) (PMMA‐co‐AM). Starch‐based blend films were prepared by using corn starch, polyvinyl alcohol (PVA), nano‐sized PMMA‐co‐AM, nano‐sized TiO₂/PMMA‐co‐AM particles, and additives, i.e., glycerol (GL) and citric acid (CA). Nano‐sized PMMA‐co‐AM was synthesized by emulsion polymerization and TiO₂ nanoparticles were also prepared by using sol–gel method. Nano‐sized TiO₂/PMMA‐co‐AM particles were synthesized by wet milling for 48 h. The morphology and crystallinity of TiO₂, nano‐sized PMMA‐co‐AM and TiO₂/PMMA‐co‐AM particles were investigated by using the scanning electron microscope (SEM) and X‐ray diffractometer (XRD). In addition, the functional groups of the TiO₂/PMMA‐co‐AM particles were characterized by IR spectrophotometry (FTIR). The physical properties such as tensile strength (TS), elongation at break (%E), degree of swelling (DS), and solubility (S) of starch‐based films were evaluated. It was found that the adding of nano‐sized particles can greatly improve the physical properties of the prepared films. The photocatalytic degradability of starch/PVA/nano‐sized TiO₂/PMMA‐co‐AM composite films was evaluated using methylene blue (MB) and acetaldehyde (ATA) as photodegradation target under UV and visible light. The degree of decomposition (C/C₀) of MB and ATA for the films containing TiO₂ and CA was 0.506 and 0.088 under UV light irradiation and 0.586 (MB) and 0.631 (ATA) under visible light irradiation, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Trimethylsilyl‐substituted triazole‐based ligand for copper‐mediated single‐electron transfer living radical polymerization of methyl methacrylate

The tripodal ‘click’ compound tris(4‐trimethylsilylmethyl‐1,2,3‐triazolylmethyl)amine (TTTA) was prepared and investigated as a ligand for copper‐catalysed single‐electron transfer living radical polymerization of methyl methacrylate (MMA). Bulk polymerizations catalysed by Cu⁰/CuBr₂/TTTA with a molar ratio of [MMA]₀/[ethyl‐2‐bromoisobutyrate]₀/[CuBr₂]₀/[TTTA]₀ = 200:2:1:1 and a 1.0 × 1.0 cm² Cu⁰ sheet were fast and well controlled (76% conversion with M_w/M_n = 1.19 after 3.5 h). Greater amounts of added air generally gave slower polymerizations although M_w/M_n remained low (<1.3) even when the polymerization was carried out under aerobic conditions. Decreasing initial concentrations of the Cu⁰/CuBr₂/TTTA catalyst system or polymerization temperatures also resulted in slower polymerizations and yielded polymers with broader dispersity. Kinetic studies in the temperature range 40–90 °C revealed an apparent activation energy of 22.6 kJ mol^?1. © 2014 Society of Chemical Industry