Synthesis of biodegradable amino‐acid‐based poly(ester amide)s and poly(ether ester amide)s with pendant functional groups

A new family of biodegradable amino‐acid‐based poly(ester amide)s (AA–PEAs) and amino‐acid‐based poly(ether ester amide)s (AA–PEEAs) consisting of reactive pendant functional groups (? COOH or ? NH₂) were synthesized from unsaturated AA–PEAs and AA–PEEAs via a thiol–ene reaction in the presence of a radical initiator (2,2′‐azobisisobutyronitrile). The synthetic method was a one‐step reaction with near 100% yields under mild reaction conditions. The resulting functional AA–PEA and AA–PEEA polymers were characterized by Fourier transform infrared spectroscopy, NMR, and differential scanning calorimetry. These new functional AA–PEA and AA–PEEA derivatives had lower glass‐transition temperatures than the original unsaturated AA–PEA and AA–PEEA polymers, and their solubility in some organic solvents also improved. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Copolymers of unsaturated and saturated poly(ether ester amide)s: Synthesis,characterization, and biodegradation

A series of biodegradable random unsaturated/saturated poly(ether ester amide)s copolymers (USPEEAs) were synthesized by an active solution polycondensation of unsaturated and saturated dicarboxylic acid‐based diester monomers with diamine salts of phenylalanine and saturated oligo(ethylene glycol) (OEG). These USPEEA copolymers were obtained with fairly good yields in DMA solvent. The chemical structures of the USPEEA copolymers were confirmed by both IR and NMR spectra. The molecular weights (M_n and M_w) of USPEEAs measured by GPC ranged from 3 to 27 kg/mol with the molecular weight distribution (MWD) ranging from 1.52 to 2.13. USPEEA copolymers obtained had T_g lower than that of the pure UPEEAs but higher than that of pure saturated poly(ether ester amide)s (SPEEA). An increase in the unsaturated component in USPEEAs led to an increase in their T_g. A preliminary in vitro biodegradation property of USPEEA copolymers were investigated in both pure PBS buffer and α‐chymotrypsin solutions. The USPEEA copolymers showed a pronounced weight loss in enzyme solutions, but a smaller weight loss in a pure PBS. The biodegradation rates of USPEEA copolymers in α‐chymotrypsin solution were much slower than those of pure PEEAs. Therefore, upon adjusting monomers feed ratio, USPEEA copolymers could have controlled chemical, physical, and biodegradation properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(ester ether siloxane)s

A series of novel thermoplastic elastomers based on ABA‐type triblock prepolymers, poly[(propylene oxide)–(dimethylsiloxane)–(propylene oxide)] (PPO‐PDMS‐PPO), as the soft segments, and poly(butylene terephthalate) (PBT), as the hard segments, was synthesized by catalyzed two‐step melt transesterification of dimethyl terephthalate (DMT) with 1,4‐butanediol (BD) and α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) (M?_n = 2930 g mol^?1). Several copolymers with a content of hard PBT segments between 40 and 60 mass% and a constant length of the soft PPO‐PDMS‐PPO segments were prepared. The siloxane‐containing triblock prepolymer with hydrophilic terminal PPO blocks was used to improve the compatibility between the polar comonomers, i.e. DMT and BD, and the non‐polar PDMS segments. The structure and composition of the copolymers were examined using ¹H NMR spectroscopy, while the effectiveness of the incorporation of α,ω‐dihydroxy‐(PPO‐PDMS‐PPO) prepolymer into the copolyester chains was controlled by chloroform extraction. The effect of the structure and composition of the copolymers on the transition temperatures (T_m and T_g) and the thermal and thermo‐oxidative degradation stability, as well as on the degree of crystallinity, and some rheological properties, were studied. Copyright © 2006 Society of Chemical Industry     

Synthesis of poly(ether amide)s from p‐xylylene glycol and bis(ether nitrile)s

BACKGROUND: Poly(ether amide)s have been well studied in terms of improving the physical and thermal properties of aromatic polyamides. Poly(ether amide)s of high enough molecular weight to be useful for industrial purposes are generally difficult to prepare. The objective of this project was to introduce a simple and commercially feasible process to prepare poly(ether amide)s by a polymerization reaction at relatively low temperature. RESULTS: A series of poly(ether amide)s were prepared by direct polyamidation of p‐xylylene glycol with bis(ether nitrile)s via the Ritter reaction using concentrated H₂SO₄ in acetic acid. The synthesized poly(ether amide)s showed good solubility in polar aprotic solvents. The resultant poly(ether amide)s had inherent viscosities in the range 0.36–1.03 dL g^?1. The glass transition temperatures of the poly(ether amide)s were determined using differential scanning calorimetry to be in the range 190–258 °C. Thermogravimetric analysis data for these polymers indicated the 10% weight loss temperatures to be in the range 290–390 °C in nitrogen atmosphere. CONCLUSION: The Ritter reaction was applied for the synthesis of a variety of poly(ether amide)s with moderate to high molecular weights. This procedure provides a simple polymerization process for the convenient preparation of poly(ether amide)s in high yield at room temperature. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of poly(ester amide)s containing crystallizable amide segments

High molecular weight segmented poly(ester amide)s were prepared by melt polycondensation of 1,4-butanediol, dimethyl adipate and a preformed bisamide-diol based on 1,4-diaminobutane and ε-caprolactone. By varying the ratio of the bisamide-diol and 1,4-butanediol, a series of polymers was obtained with a hard segment content between 10 and 85 mol%. FT-IR and WAXD analysis revealed that the poly(ester amide)s crystallize in an α-type phase similar to the α-phase of even-even nylons. These polymers all have a micro-phase separated structure with an amide-rich hard phase and an ester-rich flexible soft phase. The polymers have a low and a high melt transition, corresponding with the melting of crystals comprising single ester amide sequences and two or more ester amide sequences, respectively. The low melt transition is between 58 and 70 °C and is independent of polymer composition. By increasing the hard segment content from 10 to 85 mol% the high melt transition increased from 83 to 140 °C while the glass transition temperature increased from −45 to −5 °C. Likewise, the elastic modulus increased from 70 to 524 MPa, the stress at break increased from 8 to 28 MPa while the strain at break decreased from 820 to 370%. Thermal and mechanical properties can thus be tuned for specific applications by varying the hard segment content in these segmented polymers.     

Synthesis, characterization and biodegradation of poly(ester amide)s based hydrogels

A series of new biodegradable hybrid hydrogels were designed and fabricated from a new family of amino acid-based functional poly(ester amide) (PEA-AG) and commercial poly(ethylene glycol) diacrylate (PEG-DA) or Pluronic diacrylate (Pluronic-DA) by UV photocrosslinking. These biodegradable hybrid hydrogels were characterized in terms of equilibrium swelling ratio (Q_eq), compression modulus by dynamic mechanical analysis (DMA), and interior morphology by scanning electron microscope (SEM). Both the precursors’ chemical structures and feed ratio had significant effect on the properties of the hybrid hydrogels. All these hybrid hydrogels had a three-dimensional porous network structure. The hydrophobicity, crosslinking density and mechanical strength of the hybrid hydrogels increased with an increase in allylglycine (AG) content in the PEA-AG, but the swelling and pore size of the hybrid hydrogels decreased. The biodegradation rate of these hybrid hydrogels in an enzyme (α-chymotrypsin) solution was faster than in a pure PBS buffer control, and the biodegradation rate increased with an increase in α-chymotrypsin concentration and allylglycine content.     

Poly(ether amide) segmented block copolymers with adipic acid based tetraamide segments

Poly(tetramethylene oxide)‐based poly(ether ester amide)s with monodisperse tetraamide segments were synthesized. The tetraamide segment was based on adipic acid, terephthalic acid, and hexamethylenediamine. The synthesis method of the copolymers and the influence of the tetraamide concentration, which was varied between 3 and 44 wt %, were studied. The copolymers were characterized by differential scanning calorimetry and temperature‐dependent Fourier transform infrared, small‐angle X‐ray scattering, atomic force microscopy, and dynamic mechanical thermal analysis. The monodisperse tetraamide segments crystallized fast, forming crystalline ribbons with high aspect ratios, and the crystallinity of the tetraamide segments in the copolymers was typically 90%. The glass‐transition temperature of the poly(tetramethylene oxide) phase was low (?65 to ?70°C), and the modulus in the plateau region of the copolymers was virtually temperature‐independent. With increasing content of crystallizable amide segments in the copolymer, the storage modulus at room temperature increased from 1 to 102 MPa. This strong increase in the modulus with the tetraamide content could be approximated with a model for fiber‐reinforced polymers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Incorporation of different crystallizable amide blocks in segmented poly(ester amide)s

High molecular weight segmented poly(ester amide)s were prepared by melt polycondensation of dimethyl adipate, 1,4-butanediol and a symmetrical bisamide-diol based on ε-caprolactone and 1,2-diaminoethane or 1,4-diaminobutane. FT-IR and WAXD analysis revealed that segmented poly(ester amide)s based on the 1,4-diaminobutane (PEA(4)) give an α-type crystalline phase whereas polymers based on the 1,2-diaminoethane (PEA(2)) give a mixture of α- and γ-type crystalline phases with the latter being similar to γ-crystals present in odd-even nylons. PEA(2) and PEA(4) polymers with a hard segment content of 25 or 50 mol% have a micro-phase separated structure with an amide-rich hard phase and an ester-rich flexible soft phase. All polymers have a glass transition temperature below room temperature and melt transitions are present at 62-70 °C (T_m,1) and at 75-130 °C (T_m,2) with the latter being highest at higher hard segment content. The two melt transitions are ascribed to melting of crystals comprising single ester amide sequences and two or more ester amide sequences, respectively. These polymers have an elastic modulus in the range of 159-359 MPa, a stress at break in the range of 15-25 MPa combined with a high strain at break (590-810%). The thermal and mechanical properties are not influenced by the different crystalline structures of the polymers, only by the amount of crystallizable hard segment present.     

Macromolecular assemblies of segmented poly(ester urethane)s and poly(ether urethane)s

Polyurethanes containing different soft and hard segments were investigated by fluorescence and scanning electron microscopy. The polarity dependence of the vibrational structure of the pyrene emission spectrum indicated the formation of aggregates at concentrations, which are significantly below the critical concentrations, which define the separation of dilute‐semidilute domains. Unlike the samples with 4,4′‐methylene diphenylene diisocyanate, the samples with 2,4‐tolylene diisocyanate in hard segments give the fluorescence spectra in which the pyrene excimer appears. The supermolecular structures associated with the form of spherulites or of spherical micelles were detected by scanning electron microscopy. The results were compared with previous reports concerning viscometric data. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(urethane‐ether)s from calcium salt of p‐hydroxybenzoic acid

The synthesis and characterization of calcium‐containing poly(urethane‐ether)s, having ionic links in the main chain, is reported. Calcium salt of p‐hydroxybenzoic acid (HBA‐Ca) was prepared from p‐hydroxybenzoic acid (HBA) and used as the chain extender in the preparation of calcium‐containing poly(urethane‐ether)s. Poly(urethane‐ether)s, having two different compositions, were prepared by varying the mole ratios of poly(tetramethylene glycol), hexamethylene diisocyanate, and HBA‐Ca. The synthesized poly(urethane‐ether)s were characterized by infrared spectroscopy, thermogravimetric analysis, and dynamic mechanical analysis. The presence of calcium in the polymer chain was confirmed by energy‐dispersive X‐ray analysis. The inherent viscosity of metal‐containing polymers decreased with the increase in the metal content of the polymer. The introduction of metal into the polymer lowers the thermal stability of the polymers as indicated by the decreased initial decomposition temperature. The glass transition temperature (T_g) and the storage modulus of the metal‐containing polymers increase with the increase in metal content presumably due to the formation of physical crosslink's in the polymer. From the mechanical studies of the polymer, it was observed that the metal‐containing polymers exhibit high tensile strength and modulus. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis and characterization of silicon‐containing poly(amide‐amide)s

A modified new aromatic diacid, bis[(4‐carboxyphenyl) 4‐benzamide] dimethylsilane (IV) with preformed amide linkages and a silicon moiety was synthesized and characterized by IR, NMR, mass spectroscopy, and a physical constant. Novel poly(amide‐amide)s were synthesized from IV and aromatic diamines by Yamazaki's direct polyamidation method in N‐methyl pyrrolidinone. The polymers were obtained in excellent yields and showed reduced viscosities in the range of 0.42–6.15 dL/g. They were readily soluble in aprotic polar solvents. These poly(amide‐amide)s showed glass‐transition temperatures of 303–378°C as measured by DSC and showed no weight loss below 377°C in a nitrogen atmosphere. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1610–1617, 2001     

Synthesis,characterization, and pervaporation properties of segmented poly(urethane‐urea)s

Poly(urethane‐urea)s (PUUs) from 2,4‐tolylene diisocyanate (2,4‐TDI), poly(oxytetramethylene)diols (PTMO) or poly(butylene adipate)diol (PBA), and various diamines were synthesized and characterized by Fourier transform infrared spectroscopy, gel permeation chromatography, differential scanning calorimetry, and density measurements. Transport properties of the dense PUU‐based membranes were investigated in the pervaporation of benzene–cyclohexane mixtures. It was shown that the pervaporation characteristics of the prepared membranes depend on the structure and length of the PUU segments. The PBA‐based PUUs exhibit good pervaporation performance along with a very good durability in separation of the azeotropic benzene–cyclohexane mixture. They are characterized by the flux value of 25.5 (kg μm m⁻² h⁻¹) and the separation factor of 5.8 at 25°C, which is a reasonable compromise between the both transport parameters. The PTMO‐based PUUs display high permeation flux and low selectivity in separation of the benzene‐rich mixtures. At the feed composition of 5% benzene in cyclohexane, their selectivity and flux are in the range of 3.2 to 11.7 and 0.4 to 40.3, respectively, depending on the length of the hard and soft segments. The chemical constitution of the hard segments resulting from the chain extender used does not affect the selectivity of the PUU membranes. It enables, however, the permeability of the membranes to be tailored. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 71: 1615–1625, 1999     

Synthesis of unsaturated poly(ether amide)s based on amine‐terminated poly(ethylene glycol)

Novel water‐soluble unsaturated poly(ether amide)s (PEAs) were synthesized by low‐temperature polycondensation of fumaryl chloride and amine‐terminated poly(ethylene glycol) (Jeffamine®). The unsaturated copolymers were further chemically modified with thiols to provide reactive pendant functional groups. Hydrogels based on these copolymers were prepared by copolymerization of the PEA with N‐vinyl pyrrolidone exposure to ultraviolet (UV) irradiation. The resulting hydrogels exhibited a high swelling ratio, and the magnitude of swelling depended on the molecular weight of Jeffamine®. The swelling ratio and equilibrium water content tended to increase with increasing chain length of the Jeffamine® used in copolymer synthesis. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 913–920, 1999     

Gas foaming of segmented poly(ester amide) films

Biodegradable segmented poly(ester amide)s, based on dimethyl adipate, 1,4-butanediol and N,N′-1,2-ethanediyl-bis[6-hydroxy-hexanamide], with two distinct melting transitions were gas foamed using carbon dioxide (CO₂). Polymer films were saturated with CO₂ at 50 bar for 6 h after which the pressure was released. The samples were immersed in octane at the desired temperature after which foaming started immediately. Just above the lower melt transition the polymers retain adequate mechanical properties and dimensional stability, while the chain mobility increased sufficiently to nucleate and expand gas cells during the foaming process. In this way semi-crystalline poly(ester amide)s can be gas foamed below the flow temperature.Two poly(ester amide)s with 25 mol% (PEA2,5-25) and 50 mol% (PEA2,5-50) of bisamide segment content were foamed at 70 and 105 °C, respectively. The storage modulus (G′) of both pure polymers at the onset foaming temperature is 50-60 MPa. Closed-cell foams were obtained with a maximum porosity of ∼90%. The average pore size of PEA2,5-25 ranges from 77 to 99 μm. In contrast, the average pore size of PEA2,5-50 is in between 2 and 4 μm and can be increased to 100 μm by lowering the CO₂ saturation pressure to 20 bar. The porosity of PEA2,5-50 foams using this saturation pressure decreased to 70%.     

Synthesis and characterization of poly(ether amide ether ketone)/poly(ether ketone ketone) copolymers

A new monomer, N,N′‐bis(4‐phenoxybenzoyl)‐m‐phenylenediamine (BPPD), was prepared by condensation of m‐phenylenediamine with 4‐phenoxybenzoyl chloride in N,N‐dimethylacetamide (DMAc). A series of novel poly(ether amide ether ketone) (PEAEK)/poly(ether ketone ketone) (PEKK) copolymers were synthesized by the electrophilic Friedel‐Crafts solution copolycondensation of terephthaloyl chloride (TPC) with a mixture of diphenyl ether (DPE) and BPPD, over a wide range of DPE/BPPD molar ratios, in the presence of anhydrous AlCl₃ and N‐methylpyrrolidone (NMP) in 1,2‐dichloroethane (DCE). The influence of reaction conditions on the preparation of copolymers was examined. The copolymers obtained were characterized by different physicochemical techniques. The copolymers with 10–25 mol % BPPD were semicrystalline and had remarkably increased T_gs over commercially available PEEK and PEKK due to the incorporation of amide linkages in the main chains. The copolymers III and IV with 20–25 mol % BPPD had not only high T_gs of 184–188°C, but also moderate T_ms of 323–344°C, having good potential for the melt processing. The copolymers III and IV had tensile strengths of 103.7–105.3 MPa, Young's moduli of 3.04–3.11 GPa, and elongations at break of 8–9% and exhibited outstanding thermal stability and good resistance to organic solvents. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of organo‐soluble poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains

Poly(ether ether ketone)s and poly(ether ether ketone ketone)s containing pendant pentadecyl chains were synthesized by polycondensation of each of the two bisphenol monomers viz, 1,1,1‐[bis(4‐hydroxyphenyl)‐4′‐pentadecylphenyl]ethane and 1,1‐bis(4‐hydroxyphenyl)‐3‐pentadecyl cyclohexane with activated aromatic dihalides namely, 4,4′‐difluorobenzophenone, and 1,3‐bis(4‐fluorobenzoyl)benzene in a solvent mixture of N,N‐dimethylacetamide and toluene, in the presence of anhydrous potassium carbonate. Polymers were isolated as white fibrous materials with inherent viscosities and number average molecular weights in the range 0.70–1.27 dL g^?1 and 76,620–1,36,720, respectively. Poly(ether ether ketone)s and poly(ether ether ketone ketone)s were found to be soluble at room temperature in organic solvents such as chloroform, dichloromethane, tetrahydrofuran, and pyridine and could be cast into tough, transparent, and flexible films from their solutions in chloroform. Wide angle X‐ray diffraction patterns exhibited a broad halo at around 2θ = ～ 19° indicating that the polymers containing pentadecyl chains were amorphous in nature. In the small‐angle region, diffuse reflections of a typically layered structures resulting from the packing of pentadecyl side chains were observed. The temperature at 10% weight loss, obtained from TG curves, for poly(ether ether ketone)s and poly(ether ether ketone ketone)s were in the range 416–459°C, indicating their good thermal stability. A substantial drop in glass transition temperatures (68–78°C) was observed for poly(ether ether ketone)s and poly(ether ether ketone ketone)s due to “internal plasticization” effect of flexible pendant pentadecyl chains. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(ester amide)s derived from 1,4-butanediol, adipic acid and 6-aminohexanoic acid. Part II: composition changes and fillers

BAK poly(ester amide)s differing in the amide/ester ratio have been synthesized and characterized, considering spectroscopic data and both thermal and mechanical properties. Degradability under different media (water at 70 °C, acid or enzymatic catalysis at 37 °C) has also been studied by evaluating the changes in intrinsic viscosity, in the NMR spectra and in the surface texture of samples. The use of chain extenders, such as hexamethylene diisocyanate and 1,3-butadiene diepoxide, has been investigated and the optimal reaction conditions are reported here. Changes on mechanical properties due to the incorporation of biodegradable reinforces have also been evaluated. Finally, the synthesis and determination of thermal properties of related poly(ester amide)s constituted by glutaric or succinic acid instead of adipic acid have been investigated.     

Synthesis and characterization of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups

A new diamine monomer, 1,4-bis(4-aminophenoxycarbonyl)-2-(4-trifluoromethylphenoxy)benzene containing the trifluoromethyl and ester groups, was prepared from 2-(4-trifluoromethylphenoxy)terephthalyol chloride and 4-nitrophenol in two steps. Then, a series of novel aromatic poly(ester amide)s containing pendant trifluoromethylphenoxy groups with inherent viscosities of 0.51–1.14 dL/g have been prepared by low-temperature solution polycondensation from this diamine with various aromatic diacid chlorides. All the poly(ester amide)s are amorphous and readily soluble in many organic solvents such as N,N-dimethylacetamide (DMAC) and dimethyl sulfoxide. Tough and flexible polymer films cast from DMAc solutions have tensile strengths of 89–114 MPa, elongations at break of 5.8–8.8%, and initial moduli of 2.2–3.2 GPa. These poly(ester amide)s show glass transition temperatures between 166 and 256°C, 10% weight loss temperatures ranging from 395 to 445°C, and char yields higher of 46–56% at 800°C in nitrogen, and also exhibit low dielectric constants ranging from 3.31 to 3.52 (1 MHz), and high transparency with an ultraviolet–visible absorption cut-off wavelength in the 362–380 nm range. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of cross‐linkable poly(phthalazinone ether ketone)s

A novel class of crosslinkable poly(phthalazinone ether ketone)s with relative high molecular‐weight and good solubility were successfully synthesized by the copolymerization of bisphthalazinone containing monomer, 3,3′‐diallyl‐4,4′‐dihydroxybiphenyl and 4,4′‐di‐ fluorobenzophenone. The synthesized polymers with inherent viscosities in the range of 0.42 to 0.75 dL/g can form flexible and transparent membranes by casting from their solution. The crosslinking reaction of these polymers can be carried out by thermally curing of the virgin polymers in or without the presence of crosslinking agent. The experimental results demonstrated that the crosslinking reaction also occurred to some extent during the polymerization. The crosslinked polymers exhibited equivalent glass transition temperature (T_g) at lower crosslinking density, and showed higher T_g than virgin polymers at higher crosslinking density. The crosslinked high‐temperature polymer can be used as the base material for high temperature adhesive, coating, enamel material, and composite matrices. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Synthesis and characterization of a new family of cationic amino acid‐based poly(ester amide)s and their biological properties

A new family of positively charged and water soluble amino acid‐based poly(ester amide)s (PEAs) consisting of nontoxic L ‐arginine, diols, and aliphatic dicarboxylic acids building blocks was synthesized and characterized. The L ‐arginine based PEAs (Arg‐PEAs) were prepared by a solution polycondensation of two monomers: tetra‐p‐toluenesulfonic acids salts or hydrochloride acid salts of bis‐(L ‐arginine) α, ω‐alkylene diesters (monomer II ), and di‐p‐nitrophenyl esters of saturated or unsaturated dicarboxylic acids (monomer I ). Optimal reaction conditions were studied as functions of type of solvents and acid acceptors, concentrations of reactants. The molecular weights (M_n and M_w) of Arg‐PEAs measured by GPC ranged from 20,000 to 60,000 g mol^?1 with a rather narrow molecular weight distribution below 1.5. The chemical structures were confirmed by IR and NMR spectra. Arg‐PEAs obtained were all amorphous materials with T_g from 33 to 125°C, depending on the number and the type (saturated vs. unsaturated) of methylene groups in diols or diacids, and the type of counter‐ions attached to the guanidine group of the Arg‐based PEAs. The Arg‐PEAs had a high solubility in all polar solvents, including water. Preliminary studies of cell morphology and DNA capture capability of Arg‐PEAs indicated that this new family of cationic PEAs was nontoxic and more biocompatible than a commercial transfection agent (Superfect®), and can successfully capture plasma DNA. The strong positive charge of Arg‐PEAs as well as their good water solubility could provide unique characteristics for potential gene transfection or other charge preferred biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012