Effect of graft copolymer matrix prepared by reversible addition–fragmentation chain transfer and atom transfer radical polymerization on the electro‐optical properties of polymer‐dispersed liquid crystals

A type of graft macroinitiator, synthesized by reversible addition–fragmentation chain transfer (RAFT) and atom transfer radical polymerization, was employed to prepare polymer‐dispersed liquid crystals (PDLCs) with graft copolymer matrix; meanwhile, a linear macroinitiator was also synthesized via RAFT polymerization. The effect of linear and graft macroinitiators on the electro‐optical (EO) properties of the PDLCs was investigated. The results showed that the graft macroinitiator could make a large difference to the EO properties of the PDLCs. The memory effect was reduced remarkably, but the driving voltage increased and transmittance decreased. A possible mechanism is presented. © 2014 Society of Chemical Industry     

Macro reversible addition–fragmentation chain transfer agent mixture as a means to enhance the electro‐optical performance of polymer‐dispersed liquid crystals

Macro reversible addition–fragmentation chain transfer (RAFT) agents, i.e. RAFT polystyrene (RAFT‐PS) and RAFT poly(n‐butyl acrylate) (RAFT‐PBA), were mixed. Polymer‐dispersed liquid crystals (PDLCs) were prepared using the mixture together with methyl acrylate and liquid crystal E7. The electro‐optical properties of the PDLCs obtained were investigated. The results showed that the advantages of the electro‐optical properties of RAFT‐PS‐ and RAFT‐PBA‐dependent PDLCs could be combined in RAFT agent mixture‐dependent PDLCs. Copyright © 2011 Society of Chemical Industry     

Graft copolymerization of methylmethacrylate with N‐substituted maleimide‐styrene copolymer by ATRP

Atom transfer radical polymerization (ATRP) was employed to prepare graft copolymers having poly(MBr)‐alt‐poly(St) copolymer as backbone and poly(methyl methacrylate) (PMMA) as branches to obtain heat resistant graft copolymers. The macroinitiator was prepared by copolymerization of bromine functionalized maleimide (MBr) with styrene (St). The polymerization of MMA was initiated by poly(MBr)‐alt‐poly(St) carrying bromine groups as macroinitiator in the presence of copper bromide (CuBr) and bipyridine (bpy) at 110°C. Both macroinitiator and graft copolymers were characterized by ¹H NMR, GPC, DSC, and TGA. The ATRP graft copolymerization was supported by an increase in the molecular weight (MW) of the graft copolymers as compared to that of the macroinitiator and also by their monomodal MW distribution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Fabrication of polymer‐dispersed liquid crystals with low driving voltage based on the thiol‐ene click reaction

Polymer‐dispersed liquid crystals (PDLCs ) with a well‐defined polymer matrix were successfully fabricated by the thiol‐ene click reaction based on poly(ethylene glycol) diacrylate (PEGDA ) and trimethylolpropanetris‐(3‐mercaptopropionate) (TMTP ). UV ?visible spectrophotometry, Fourier transform IR spectroscopy, SEM and polarized optical microscopy were employed to explore the PDLC films obtained. Electro‐optical properties were studied with a UV ?visible spectrophotometer. It was found that the PDLC films with optimal thiol content fabricated by the thiol‐ene click reaction showed high transmittance, low driving voltage and a low memory effect. It was concluded that the driving voltage change of PDLCs with different thiol concentrations was caused by the polymerization rate and the structure of the polymer matrix. © 2017 Society of Chemical Industry     

Optimization of LC droplet size and electro‐optical properties of acrylate‐based polymer‐dispersed liquid crystal by controlling photocure rate

We investigated the effects of the different content ratios of 2‐ethylhexylacrylate (2‐EHA) and 2‐ethylhexylmethacrylate (2‐EHMA) on the relationships among the photopolymerization rate, morphology of liquid crystals (LCs) droplets, and electro‐optical properties of trifunctional urethane acrylate‐based polymer‐dispersed liquid crystal (PDLC) systems. Photo‐differential scanning calorimetry (DSC) analysis and resistivity measurement revealed that increasing 2‐EHMA content gradually decreased the photocure rate of trifunctional urethane acrylate‐based PDLCs, which prolonged the phase separation between the LC molecules and the prepolymers. Morphological observations and electro‐optical measurements demonstrated that trifunctional urethane acrylate‐based PDLCs with the 2‐EHA:2‐EHMA ratios from 4:1 to 3:2 in weight percent formed the favorable microstructures of LC droplets being within the range of 1–5 µm to scatter light efficiently and showed the satisfactory off‐state opacity and on‐state transmittance and the relatively low‐driving voltage. The microstructures of LC droplets and electro‐optical properties of trifunctional urethane acrylate‐based PDLCs could be usefully optimized by controlling the photocure rate using the different 2‐EHA/2‐EHMA content ratios. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3098–3104, 2013     

Electro‐optical properties of polymer‐dispersed liquid crystal prepared by controlled graft living radical polymerization

Living graft macromolecule has been prepared through reversible addition‐fragmentation chain transfer (RAFT) living radical polymerization in one step. Then, it was used to make polymer‐dispersed liquid crystal (PDLC) by controlling the mole ratio of styrene (St) to 1,6‐hexanediol diacrylate (HDDA) and adjusting the content of prepared graft macromolecule. The results showed that electro‐optical properties of PDLC have been optimized. Different concentration of living graft macromolecule and different mole ratio of St/HDDA led to substantial improvement of driving voltage (threshold voltage and saturation voltage) and memory effect of PDLC simultaneously. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The effect of photoinitiator concentration and structures of RAFT macroinitiators on the memory effect of polymer dispersed liquid crystals

The article aimed to decrease the memory effect of polymer dispersed liquid crystals (PDLCs) films, reversible additional‐fragmental chain transfer (RAFT) polymerization was used to synthesize RAFT‐polystyrene (RAFT‐PS), which was a kind of RAFT macroinitiators and used to prepare PDLCs via photo polymerization induced phase separation (PIPS). Different RAFT agents were used to synthesize RAFT‐PS. The effect of photoinitiator concentration on the memory effect of these PDLCs was investigated, and the effect of structures of RAFT macroinitiators on the memory effect of the PDLCs was also discussed. The results showed that PDLC films with higher photoinitiator concentration and polymer matrix which had two rigid chains in two ends showed lower memory effect, which could be reduced from 10.9% to 2.5% in this experiment. POLYM. ENG. SCI., 55:8–13, 2015. © 2014 Society of Plastics Engineers     

Graft copolymers from commercial chlorinated polypropylene via Cu(0)‐mediated atom transfer radical polymerization

Commercially available chlorinated polypropylene has been used as a macroinitiator for the Cu(0)‐mediated atom transfer radical polymerization of methyl methacrylate and tert‐butyl acrylate to obtain well‐defined graft copolymers. The relatively narrow molecular weight distribution in the graft copolymers and linear kinetic plots indicated the controlled nature of the copolymerization reactions. Both Fourier transform infrared and ¹H NMR studies confirmed that the graft reactions had taken place successfully. After graft copolymer formation, tert‐butyl groups of poly(tert‐butyl acrylate) side chains were completely converted into poly(acrylic acid) chains to afford corresponding amphiphilic graft copolymers. © 2016 Society of Chemical Industry     

The kinetics and morphology of polymer dispersed liquid crystals by doped crylic acid

It is widely appreciated that electro‐optical activity in polymer dispersed liquid crystals (PDLCs) depends on phase separation of polymer and liquid crystals (LCs). The morphology of the LCs domains depends on the detail of the chemical and physical processes active during the formation of domains. This work discusses two‐phase morphology in an acrylate‐based system that developed during polymerization induced phase separation. UV/VIS spectrometer is used for monitoring the polymerization of the PDLCs by real‐time scattering. The doped crylic acid accelerated the speed of polymerization. The electro‐optical properties of PDLCs films are measured by Polarimeter (PerkinElmer Model 341). The lower threshold voltage was obtained by doped crylic acid at suitable ratio. The polarizing optical microscopy and Fourier transform infrared image system are used for depicting the morphology of LC droplets in polymer matrix. The sizes and dispersion of LC droplets were influenced by doped crylic acid which accelerated the speed of polymerization. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Gas transport and optical properties of ABA‐type triblock copolymers designed using fluorine‐containing polyimide macroinitiators with methyl methacrylate

4,4'‐(Hexafluoroisopropylidene) diphthalic anhydride 2,3,5,6‐tetramethyl‐1,4‐phenylenediamine (6FDA‐TeMPD) polyimide macroinitiator was synthesized and reacted with poly(methyl methacrylate) (PMMA) to form an ABA‐type triblock copolymer by atom transfer radical polymerization. The effect of the ABA‐type triblock copolymer structure on solid, thermal, optical and gas transport properties was systematically investigated and compared with the physical blend polymer. The blend polymer was cloudy, whereas the triblock copolymer was colorless and transparent. The PMMA component decomposition temperature for the triblock copolymer slightly shifted to higher temperature, while its gas barrier property was higher than the blend polymer. The refractive index and the gas permeability decreased while maintaining the heat resistance by a high nanoscale distribution of both polymer components. The 6FDA‐TeMPD/PMMA ABA‐type triblock copolymer can be described as a polymer material with high heat resistance, high gas barrier property and low refractive index amongst existing polymers. © 2013 Society of Chemical Industry     

Poly(ε‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) amphiphilic copolymers prepared by a combination of ring‐opening polymerization and atom transfer radical polymerization: Synthesis,self‐assembly,and thermoresponsive property

Thermoresponsive graft copolymers of ε‐caprolactone and N‐isopropylacrylamide were synthesized by a combination of ring‐opening polymerization and the sequential atom transfer radical polymerization (ATRP). The copolymer composition, chemical structure, and the self‐assembled structure were characterized. The graft length and density of the copolymers were well controlled by varying the feed ratio of monomer to initiator and the fraction of chlorides along PCL backbone, which is acting as the macroinitiator for ATRP. In aqueous solution, PCL‐g‐PNIPAAm can assemble into the spherical micelles which comprise of the biodegradable hydrophobic PCL core and thermoresponsive hydrophilic PNIPAAm corona. The critical micelle concentrations of PCL‐g‐PNIPAAm were determined under the range of 6.4–23.4 mg/L, which increases with the PNIPAAm content increasing. The mean hydrodynamic diameters of PCL‐g‐PNIPAAm micelles depend strongly on the graft length and density of the PNIPAAm segment, allowing to tune the particle size within a wide range. Additionally, the PCL‐g‐PNIPAAm micelles exhibit thermosensitive properties and aggregate when the temperature is above the lower critical solution temperature. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41115.     

Controlled grafting of polymer brushes on poly(vinylidene fluoride) films by surface‐initiated atom transfer radical polymerization

Controlled grafting of well‐defined polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated atom transfer radical polymerization (ATRP). Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the hydroxyl groups covalently linked to the surface with 2‐bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA) and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the α‐bromoester‐functionalized PVDF surface. The chemical composition of the graft‐functionalized PVDF surfaces was characterized by X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance (ATR)–FTIR spectroscopy. Kinetics study revealed a linear increase in the graft concentration of PMMA and PEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The “living” chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3704–3712, 2006     

Plasmon‐enhanced,two‐photon absorption in Schiff‐base‐modified poly(styrene‐co‐maleic anhydride)–gold nanocomposites

Poly(styrene‐co‐maleic anhydride) (SMA) is a synthetic copolymer with interesting thermal and membrane properties. Schiff bases are one of the most widely used organic compounds with chelating ligands having N, S, and O as donor atoms. A Schiff‐base‐modified SMA was synthesized by the reaction of the copolymer with salicylaldehyde thiosemicarbazone. Gold (Au) nanoparticles (NPs), synthesized by a citrate reduction method were used to prepare the polymer–Au nanocomposites. In this research, we explored and investigated the effects on the linear and nonlinear optical properties of the Schiff‐base‐modified SMA copolymer with the incorporation of Au NPs. Open‐aperture Z‐scan measurements were recorded for the polymer, modified polymer, and polymer–Au nanocomposites at 532 nm with an Nd:YAG laser with a repetition rate of 10 Hz and a pulse width of 5 ns. The results indicate that the addition of the Au NPs effectively enhanced the two‐photon absorption coefficients of the polymer and, thereby, provided a platform for the development of nonlinear optical devices with good optical‐limiting properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45377.     

Graft copolymerization of methyl methacrylate with an N‐substituted maleimide–liquid‐crystalline copolymer by atom transfer radical polymerization

The synthesis of novel copolymers consisting of a side‐group liquid‐crystalline backbone and poly (methyl methacrylate) grafts were realized by the use of atom transfer radical polymerization (ATRP). In the first stage, the bromine‐functional copolymers 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate and (2,5‐dioxo‐2,5‐dihydro‐1H‐pyrrole‐1‐yl)methyl 2‐bromopropanoate were synthesized by free‐radical polymerization. These copolymers were used as initiators in the ATRP of methyl methacrylate to yield graft copolymers. Both the macroinitiator and graft copolymers were characterized by ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP graft copolymerization was supported by an increase in the molecular weight of the graft copolymers compared to that of the macroinitiator and also by their monomodal molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Electro‐optical properties of polymer dispersed liquid crystal prepared by successively controlled living radical polymerization

Polymer dispersed liquid crystal (PDLC) films were obtained by successive controlled living radical polymerizations: starting polystyrene (M1) was obtained by reversible addition‐fragmentation polymerization (RAFT), M1 was converted to P‐chloromethylated polystyrene (M2) which was grafted with polystyrene branches by atom transfer radical polymerization (ATRP) to yield RAFT‐initiating graft polymer containing trithiocarbonate moieties in the backbone (M3, RAFT‐active grafted polystyrene), and then PDLC films were prepared by photo‐induced RAFT copolymerization of methyl acrylate with M3 in the presence of a nematic liquid crystal. The electro‐optical properties of the films were investigated for the purpose to apply them to optical devices. Experimental results showed that preferable properties could be acquired by controlling the amount of M3 and the liquid crystal E7 in the polymer matrix of PDLC films. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

Significantly improving electro‐activated shape recovery performance of shape memory nanocomposite by self‐assembled carbon nanofiber and hexagonal boron nitride

This study presents two effective approaches to significantly improve the electro‐thermal properties and electro‐activated shape recovery performance of shape memory polymer (SMP) nanocomposites that are incorporated with carbon nanofibers (CNFs) and hexagonal boron nitrides (h‐BNs), and show Joule heating triggered shape recovery. CNFs were self‐assembled and deposited into buckypaper form to significantly improve the electrical properties of SMP and achieve the shape memory effect induced by electricity. The h‐BNs were either blended into or self‐assembled onto CNF buckypaper to significantly improve the thermally conductive properties and electro‐thermal performance of SMPs. Furthermore, the shape recovery behavior and temperature profile during the electrical actuation of the SMP nanocomposites were monitored and characterized. It was found that a unique synergistic effect of CNFs and h‐BNs was presented to facilitate the heat transfer and accelerate the electro‐activated shape recovery behavior of the SMP nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40506.     

Synthesis of well‐defined polystyrene‐graft‐poly(methyl methacrylate)

A well‐defined graft copolymer, polystyrene‐graft‐poly(methyl methacrylate), was synthesized in two steps. In the first step, styrene and p‐vinyl benzene sulfonyl chloride were copolymerized via reversible addition–fragmentation chain transfer polymerization (RAFT) in benzene at 60 °C with 2‐(ethoxycarbonyl)prop‐2‐yl dithiobenzoate as a chain transfer agent and 2,2′‐azobis(isobutyronitrile) as an initiator. In the second step, poly[styrene‐co‐p‐(vinyl benzene sulfonyl chloride)] was used as a macroinitiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in toluene at 80 °C with CuCl as a catalyst and 2,2′‐bipyridine as a ligand. With sulfonyl chloride groups as the initiating sites for the ATRP of MMA, high initiation efficiencies were obtained. Copyright © 2006 Society of Chemical Industry     

Nitroxide‐Controlled Grafting by an Insertion Mechanism using a Polymerizable N‐Oxyl

Summary: The polymerizable nitroxide 4‐acryloyloxy‐2,2,6,6‐tetramethylpiperidine‐N‐oxyl (AOTEMPO) was utilized in a two step polymerization to prepare alkoxyamine‐functionalized backbone polymers. These backbones were then used as initiators for stable free‐radical graft polymerizations in bulk at 125 °C. The products were cleaved into their linear components by reaction with L ‐(+)‐ascorbic acid allowing a reproducible analysis of the molecular weights. The influences of the backbone concentration and the graft density on the polymerization were investigated. Graft polymers purely consisting of styrene were produced as well as polymers with a backbone based on 2‐ethoxyethyl acrylate (EOEA). In addition a graft polymer with block copolymer side chains was prepared by extending a preformed graft polymer. In all cases the controlled course of the reaction was confirmed by the linear increase of the molecular weights over conversion and the low polydispersities of the products.

Structure of an extended graft copolymer.     

Synthesis of poly(aryl ether sulfone)‐graft‐polystyrene and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] through atom transfer radical polymerization

A new graft copolymers poly(aryl ether sulfone)‐graft‐polystyrene (PSF‐g‐PS) and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] (PSF‐g‐(PS‐b‐PMMA)) were successfully prepared via atom transfer radical polymerisation (ATRP) catalyzed by FeCl₂/isophthalic acid in N,N‐dimethyl formamide. The products were characterized by GPC, DSC, IR, TGA and NMR. The characterization data indicated that the graft copolymerization was accomplished via conventional ATRP mechanism. The effect of chloride content of the macroinitiator on the graft copolymerization was investigated. Only one glass transition temperature (T_g) was detected by DSC for the graft copolymer PSF‐g‐PS and two glass transition temperatures were observed in the DSC curve of PSF‐g‐(PS‐b‐PMMA). The presence of PSF in PSF‐b‐PS or PSF‐g‐(PS‐b‐PMMA) was found to improve thermal stabilities. © 2002 Society of Chemical Industry     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004