Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of perfluorinated acrylate–methyl methacrylate copolymers

A novel perfluorinated acrylic monomer 3,5‐bis(perfluorobenzyloxy)benzyl acrylate (FM) with perfluorinated aromatic units was synthesized with 3,5‐bis(perfluorobenzyl)oxybenzyl alcohol, acryloyl chloride, and triethylamine. Copolymers of FM monomer with methyl methacrylate (MMA) were prepared via free‐radical polymerization at 80°C in toluene with 2,2′‐azobisisobutyronitrile as the initiator. The obtained copolymers were characterized by ¹H‐NMR and gel permeation chromatography. The monomer reactivity ratios for the monomer pair were calculated with the extended Kelen–Tüdos method. The reactivity ratios were found to be r₁ = 0.38 for FM, r₂ = 1.11 for MMA, and r₁r₂ < 1 for the pair FM–MMA. This shows that the system proceeded as random copolymerization. The thermal behavior of the copolymers was investigated by thermogravimetric analysis and differential scanning calorimetry (DSC). The copolymers had only one glass‐transition temperature, which changed from 46 to 78°C depending on the copolymer composition. Melting endotherms were not observed in the DSC traces; this indicated that all of the copolymers were completely amorphous. Copolymer films were prepared by spin coating, and contact angle measurements of water and ethylene glycol on the films indicated a high degree of hydrophobicity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of methyl methacrylate/styrene hyperbranched copolymers via living radical mechanism

Free‐radical copolymerizations of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with a methyl methacrylate (MMA)/zinc chloride (ZnCl₂) complex were carried out under UV light irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating living radical polymerization of the vinyl group. The reactivity ratios (r₁ = 0.56 and r₂ = 0.52: DTCS [M₁]; MMA [M₂]) obtained for this copolymerization system were different from a corresponding model system (alternating copolymer) of a styrene and MMA/ZnCl₂ complex (r₁ = 0.25 and r₂ = 0.056). It was found that the hyperbranched copolymers produced exhibited a random branching structure. It was found that the Lewis acid ZnCl₂ formed the complex not only with MMA but also with the carbamate group of inimer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2490–2495, 2003     

Copolymerization of N‐aryl substituted itaconimide with methyl methacrylate: Effect of substituents on monomer reactivity ratio and thermal behavior

The article describes the synthesis and characterization of N‐(4‐methoxy‐3‐chlorophenyl) itaconimide (MCPI) and N‐(2‐methoxy‐5‐chlorophenyl) itaconimide (OMCPI) obtained by reacting itaconic anhydride with 4‐methoxy‐3‐chloroanisidine and 2‐methoxy‐5‐chloroanisidine, respectively. Structural and thermal characterization of MCPI and OMCPI monomers was done by using ¹H NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of MCPI or OMCPI with methyl methacrylate (MMA) in solution was carried out at 60°C using AIBN as an initiator and THF as solvent. Feed compositions having varying mole fractions of MCPI and OMCPI ranging from 0.1 to 0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by FTIR, ¹H NMR, and elemental analysis and percent nitrogen content was used to calculate the copolymer composition. The monomer reactivity ratios for MMA–MCPI copolymers were found to be r₁ (MMA) = 0.32 ± 0.03 and r₂ (MCPI) = 1.54 ± 0.05 and that for MMA–OMCPI copolymers were r₁ (MMA) = 0.15 ± 0.02 and r₂ (OMCPI) = 1.23 ± 0.18. The intrinsic viscosity [η] of the copolymers decreased with increasing mole fraction of MCPI/or OMCPI. The glass transition temperature as determined from DSC scans was found to increase with increasing amounts of OMPCI in copolymers. A significant improvement in the char yield as determined by thermogravimetry was observed upon copolymerization. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2391–2398, 2006     

Atom transfer radical copolymerization of glycidyl methacrylate and methyl methacrylate

Glycidyl methacrylate (GMA) and methyl methacrylate (MMA) copolymers were synthesized by atom transfer radical polymerization (ATRP). The effect of different molar fractions of GMA, ranging from 0.28 to 1.0, on the polymer polydispersity index (weight‐average molecular weight/number‐average molecular weight) as the indicator of a controlled process was investigated at 70°C, with ethyl 2‐bromoisobutyrate as an initiator and 4,4′‐dinonyl‐2,2′‐bipyridyne (dNbpy)/CuBr as a catalyst system in anisole. The monomer reactivity ratios (r values) were obtained by the application of the conventional linearization Fineman–Ross method (r_GMA = 1.24 ± 0.02 and r_MMA = 0.85 ± 0.03) and by the Mayo–Lewis method (r_GMA = 1.19 ± 0.04 and r_MMA = 0.86 ± 0.03). The molecular weights and polydispersities of the copolymers exhibited a linear increase with GMA content. The copolymer compositions were determined by ¹H‐NMR and showed a domination of syndiotactic structures. The glass‐transition temperatures (T_g) of the copolymers analyzed by differential scanning calorimetry (DSC) decreased in the range 105–65°C with increasing GMA units. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Copolymerization of methyl methacrylate with 4‐vinylpyridine initiated by a novel Ni(II)α‐Benzoinoxime complex

Copolymerizations of methyl methacrylate (MMA) with 4‐vinylpyridine (4VP) were performed from different monomer feed ratios in 1,4‐dioxan at 30°C under free radical initiation experimental conditions, using Ni(II)α‐Benzoinoxime complex as initiator. The obtained copolymers (PMMA4VP) were examined by FTIR and ¹H NMR spectroscopies. The composition of these copolymers was calculated, using ¹H NMR spectra and elemental analysis. Monomer reactivity ratios were estimated from Fineman–Ross (FR, r_m = 0.550, r_v = 1.165) and Kelen–Tudos (KT, r_m = 0.559, r_v = 1.286) linearization methods, as well as nonlinear error in variables model (EVM) method using the RREVM computer program (RREVM, r_m = 0.559, r_v = 1.264). These values suggest that MMA‐4VP pair copolymerizes randomly. ¹H NMR spectra provide information about the stereochemistry of the copolymers in terms of sequence distributions and configurations. These results showed that the age of the Ni complex has an impact not only on its activity towards polymerization reactions but also on the features of the corresponding copolymers, whereas the chemical composition was insensitive to this prominent factor. The mechanism of MMA‐4VP copolymerization is consistent with a radical process as supported by microstructure and molecular weight distribution studies. Thermal behaviours of these copolymers were investigated by differential scanning calorimetry and thermogravimetric analysis. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis,characterization, reactivity ratios by nuclear magnetic resonance spectroscopy,and application of (2,5‐Dichlorophenyl acrylate‐co‐glycidyl methacrylate) polymers as adhesives for the leather industry

2,5‐ Dichlorophenyl acrylate (DPA)‐co‐glycidyl methacrylate (GMA) polymers having five different compositions were synthesized in 1,4‐dioxane using benzoyl peroxide as a free‐radical initiator at 70 ± 0.5°C. Using ¹H‐NMR spectroscopy, the composition of the two monomers in the copolymers was calculated by comparing the integral values of the aromatic and aliphatic proton peaks. The reactivity ratios were calculated by Fineman–Ross (r₁ = 0.31 and r₂ = 1.08), Kelen–Tudos (r₁ = 0.40 and r₂ = 1.15), and extended Kelen–Tudos (r₁ = 0.39 and r₂ = 1.16) methods. The nonlinear error‐in‐variables model was used to compare the reactivity ratios. The copolymers were characterized by ¹H and proton decoupled ¹³C‐NMR spectroscopes. Gel permeation chromatography was performed for estimating the M_w and M_n and M_w/M_n of the poly(DPA) and copolymers (DPA‐co‐GMA: 09 : 91 and 50 : 50). Thermal stability of the homo‐ and copolymers was estimated using TGA [poly(DPA) > DPA‐co‐GMA (50 : 50) > DPA‐co‐GMA (09:91)], while DSC was utilized for determining the glass transition temperature. T_g increased with increased DPA content in the copolymer. The 50 : 50 mol % copolymer was chosen for curing with diethanolamine in chloroform. The cured resins were tested for the adhesive properties on leather at different temperatures (50, 90, 100, and 110°C). The resin cured at 50 °C exhibited a maximum peel strength of 1.6 N/mm, revealing a good adhesive behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1167–1174, 2006     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Studies on the copolymerization of methyl methacrylate and N-aryl maleimides

This article describes the synthesis and characterization of copolymers of methyl methacrylate (MMA) and N-4-chlorophenyl maleimide (PC)/N-3-chlorophenyl maleimide (MC). The copolymers were synthesized by varying the mole fraction of N-aryl maleimides from 0.1 to 0.5 in the initial feed using azobisisobutyronitrile (AIBN) as an initiator and tetrahydrofuran (THF) as the solvent. The copolymer composition was determined from the ¹H-NMR spectra by taking the ratio of proton resonance signals due to methoxy protons (δ = 3.59 ppm) of MMA and aromatic protons (δ = 7.2–7.4 ppm) of N-aryl maleimides. The reactivity ratios for MMA–PC and MMA–MC copolymers were found to be 0.952 (r₁), 0.029 (r₂) and 0.833 (r₁) and 0.033 (r₂), respectively. Thermal characterization of the copolymers was done using differential scanning calorimetry (DSC) and dynamic thermo-gravimetry. Initial decomposition temperature and glass transition temperature increased with increasing mole fraction of N-aryl maleimide content in the copolymers. © 1996 John Wiley & Sons, Inc.     

Kinetics for copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

The kinetics for the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) was investigated. The initial copolymerization rate R_p is proportional to the initiator concentration to the power of 0.54. The apparent activation energy of the overall copolymerization was measured to be 69.0 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.42 and r_MMA = 1.63. R_p reduces slightly, and the molecular weight of the resultant copolymer decreases with increasing the concentration of the chain transfer agent N‐dodecanethiol (RSH). The more the transfer agent, the narrower the molecular weight distribution of the resulting copolymer. The following chain‐transfer constant of RSH for the copolymerization of MMA with NCMI in benzene at 50°C was obtained: C_s = 0.23. The glass transition temperature (T_g) of the copolymer increases with increasing f_NCMI, which indicates that adding NCMI can improve the heat resistance of Plexiglas. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1293–1297, 1999     

Organotin polymers. VII. Copolymerization of triphenyltin methacrylate with some acrylic and methacrylic acid esters

The monomer reactivity ratios for the copolymerization of triphenyltin methacrylate with methyl acrylate, ethyl acrylate, and butyl acrylate have been found to be r₁ = 2.58, r₂ = 0.66, r₁ = 2.37, r₂ = 0.43, and r₁ = 1.27, r_0.39 = 0.39, respectively. also, the copolymerization parameters of triphenyltin methacrylate with methyl methacrylate and butyl methacrylate were as follows: r₁ = 0.94, r₂ = 0.99, and r₁ = 0.68, r₂ = 0.83, respectively. Copolymerization reactions were carried out in solution at 70°C using 1 mol % AIBN, and the copolymer compositions were determined by tin analysis. The sequence distribution of the alternating diad fractions for the systems studied were calculated at various feed compositions. The structure of the triphenyltin methacrylate monomer as well as its azeotropic copolymer with butyl methacrylate were investigated by IR spectroscopy.     

Copolymerization of alkyl α-chloroacrylates with methyl methacrylate

Hexyl α-chloroacrylate (HCA) and cyclohexyl α-chloroacrylate (CCA) have been copolymerized with methyl methacrylate (MMA) in toluene at 55°C using azobisisobutyronitrile (AIBN) as initiator. Copolymer compositions have been determined both by ¹H NMR and elemental analyses. For copolymerization of MMA (M1) with HCA (M2), the reactivity ratios (RR) are r₁ = 0.47 ± 0.19 and r₂ = 0.81 ± 0.51 and with CCA the values are r₁ = 0.76 ± 0.31 and r₂ = 2.30 ± 1.73. Thermal properties of these copolymers have also been investigated.     

Controllable radical copolymerization of styrene and methyl methacrylate using 1,1,2,2‐tetraphenyl‐1,2‐bis(trimethylsilyloxy) ethane as initiator

Copolymerization of styrene (St) and methyl methacrylate (MMA) was carried out using 1,1,2,2‐tetraphenyl‐1,2‐bis (trimethylsilyloxy) ethane (TPSE) as initiator; the copolymerization proceeded via a “living” radical mechanism and the polymer molecular weight (M_w) increased with the conversion and polymerization time. The reactivity ratios for TPSE and azobisisobutyronitrile (AIBN) systems calculated by Finemann–Ross method were r_St = 0.216 ± 0.003, r_MMA= 0.403 ± 0.01 for the former and r_St= 0.52 ± 0.01, r_MMA= 0.46 ± 0.01 for the latter, respectively, and the difference between them and the effect of polymerization conditions on copolymerization are discussed. Thermal analysis proved that the copolymers obtained by TPSE system showed higher sequence regularity than that obtained by the AIBN system, and the sequence regularity increased with the content of styrene in copolymer chain segment. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1474–1482, 2001     

Synthesis and Characterization of Homo- and Copolymers of N-4-Azodiphenyl Maleimide with Methyl Methacrylate and Styrene

The synthesis and free radical homopolymerization of N-4-azodiphenylmaleimide (ADPMI) and copolymerization of methyl methacrylate (MMA) and styrene (ST) with ADPMI using an AIBN initiator were performed in THF solvent at 70°C. A series of copolymers, ADPMI-MMA and ADPMI-ST, were prepared using different feed ratios of comonomers. The polymer samples have been characterized by solubility tests, intrinsic viscosity measurements, FT-IR, ¹H-NMR spectral analysis, and thermo-gravimetric analysis. The values of monomer reactivity ratios r₁ and r₂ determined by Fineman-Ross and Kelen-Tudos methods are 0.16 and 0.63, and 0.26 and 0.25 in ADPMI/MMA and ADPMI/ST systems, respectively. Alfrey-Price Q-e values for ADPMI are Q = 2.27 and e = 1.92, and 0.41 and 1.949 for ADPMI/MMA and ADPMI/ST systems, respectively. It was found that the initial and final decomposition temperatures increased with the increase of ADPMI content in the copolymer samples.     

Studies on the copolymerization of methyl methacrylate with N‐(o/m/p‐chlorophenyl) itaconimides

The article describes the synthesis and characterization of N‐aryl itaconimide monomers such as: N‐(p‐chlorophenyl) itaconimide (PI)/N‐(m‐chlorophenyl) itaconimide (MI)/N‐(o‐chlorophenyl) itaconimide (OI) and its copolymerization behavior with MMA. The homopolymers and copolymers of N‐aryl itaconimides and methyl methacrylate (MMA, M₂) were synthesized by varying the mol fraction of N‐aryl itaconimides in the initial feed from 0.1 to 0.5 using azobisisobutyronitrile (AIBN) as an initiator and tetrahydrofuran (THF) as the solvent. Copolymer composition was determined using ¹H‐NMR spectroscopy [by taking the ratio of intensities of signals due to ? OCH₃ of MMA (δ = 3.59 ppm) and the aromatic proton (δ = 7.2–7.5 ppm) of N‐aryl itaconimides] and percent nitrogen content. The reactivity ratios were found to be r₁ = 1.33 and r₂ = 0.36 (PI‐MMA) r₁ = 1.15 and r₂ = 0.32 (MI‐MMA) and r₁ = 0.81 and r₂ = 0.35 (OI‐MMA). Molecular weight as determined using high‐performance liquid chromatography decreased with increasing mol fraction of itaconimides in copolymers. All the polymers had a polydisperstivity index in the range of 1.5–2.6.Thermal characterization was done using differential scanning calorimetry and dynamic thermogravimetry in nitrogen atmosphere. Incorporation of these N‐aryl itaconimides in PMMA backbone resulted in an improvement in glass transition temperature (T_g) and thermal stability. Percent char increased with the increase of PI/MI/OI content in the copolymers. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2078–2086, 2001     

Radiation-induced copolymerization of vinylphosphonic dichloride with methyl methacrylate and styrene

The γ-ray-induced copolymerization of vinylphosphonic dichloride (VPDC) with methyl methacrylate (MMA) and styrene (St) was studied at 25°C (liquid phase) and ?78°C (Solid phase). The reaction mechanisms are discussed. The reactivity ratios for the copolymerization of the VPDC–MMA system were determined as follows: The difference between the reactivity between the liquid-phase (25°C) and solid-phase (?78°C) copolymerization is mainly attributable to the r₂ value. The behavior of the liquid-phase copolymerization of the VPDC–St system was anomalous, the r₁ value being negative in the range from 0 to 80 mole-% of VPDC monomer. In the solid-phase (?78°C) copolymerization for the VPDC–St system, the reactivity ratios r₁ and r₂ were 0.097 and 1.6, respectively. The rate of copolymerization (R_p) at 25°C, for both the VPDC–MMA and VPDC–St systems, passes a maximum point at a certain monomer concentration, suggesting that the composition of copolymer is considerably affected by R_p. This phenomenon was interpreted by the assumption that an energy transfer reaction from VPDC monomer to the other vinyl compound can easily occur.     

Atom transfer radical copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

Atom transfer radical polymerization has been applied to simultaneously copolymerize methyl methacrylate (MMA) and N‐cyclohexylmaleimide (NCMI). Molecular weight behaviour and kinetic study on the copolymerization with the CuBr/bipyridine(bpy) catalyst system in anisole indicate that MMA/NCMI copolymerization behaves in a ‘living’ fashion. The influence of several factors, such as temperature, solvent, initiator and monomer ratio, on the copolymerization were investigated. Copolymerization of MMA and NCMI in the presence of CuBr/bpy using cyclohexanone as a solvent instead of anisole displayed poor control. The monomer reactivity ratios were evaluated as r_NCMI = 0.26 and r_MMA=1.35. The glass transition temperature of the resulting copolymer increases with increasing NCMI concentration. The thermal stability of plexiglass could be improved through copolymerization with NCMI. © 2000 Society of Chemical Industry     

Synthesis of imide‐based methacrylic monomers and their copolymerization with methyl methacrylate: monomer reactivity ratios and heat resistance properties

The newly designed methacrylic monomer series 4‐phthalimidocyclohexyl methacrylate (PCMA ), 4‐hexahydrophthalimidocyclohexyl methacrylate (HPCMA) and 4‐hexahydro‐3,6‐methanophthalimidocyclohexyl methacrylate (HMPCMA) were synthesized. Their homopolymers and methyl methacrylate (MMA) based copolymer series were polymerized by free‐radical polymerization. The copolymer compositions were characterized using ¹H NMR spectra. The monomer reactivity ratios were calculated employing the Fineman?Ross (F‐T) and Kelen?Tüdös (K‐T) methods at low conversion. The values of r₁ and r₂ obtained by the F‐T and K‐T methods appear to be in close agreement (their average values are r₁ = 1.3061 and r₂ = 0.7336 for poly(PCMA‐co‐MMA), r₁ = 1.5169 and r₂ = 0.6840 for poly(HPCMA‐co‐MMA), r₁ = 1.7748 and r₂ = 0.5664 for poly(HMPCMA‐co‐MMA)) . The thermal stabilities and thermomechanical characteristics of the homopolymer and copolymer series were investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. © 2018 Society of Chemical Industry     

Organotin polymers. IV. Binary and ternary copolymerizations of tributyltin acrylate and methacrylate with styrene,allyl methacrylate,butyl methacrylate,butyl acrylate,and acrylonitrile

The monomer reactivity ratios for the copolymerization of tributyltin acrylate with styrene and allyl methacrylate have been found to be r₁ = 0.213, r₂ = 1.910 and r₁ = 0.195, r₂ = 2.257, respectively. Also, the copolymerization parameters of tributyltin methacrylate with styrene and allyl methacrylate were as follows: r₁ = 0.256, r₂ = 1.104 and r₁ = 2.306, r₂ = 1.013. Copolymerization reactions were carried out in solution at 70°C using 1 mole % AIBN, and the copolymer compositions were determined by tin analysis. Ternary copolymerization of the three systems butyl methacrylate–tributyltin methacrylate–acrylonitrile, butyl acrylate–tributyltin methacrylate–acrylonitrile, and styrene–tributyltin acrylate–acrylonitrile have been studied, and the terpolymer composition of each system was determined through tin and nitrogen analyses. The variation of instantaneous and average terpolymer composition with conversion fit satisfactorily the experimental results over a wide range of conversion.     

Radical copolymerization between methyl methacrylate and N‐cyclohexylmaleimide with thiol as an inifer

N‐dodecanethiol (RSH) was found efficient to initiate the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) at 40–60°C. The initial copolymerization rate, R_p, increases respectively with increasing [RSH] and the mol fraction of NCMI in the comonomer feed, f_NCMI. The molecular weight of the copolymer decreases with increasing [RSH]. The initiator transfer constant of RSH was determined to be C_I = 0.21. The apparent activation energy of the overall copolymerization was measured to be 46.9 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.32 and r_MMA = 1.35. The glass transition temperature of the copolymer increases obviously with increasing f_NCMI, which indicates that adding NCMI may improve the heat resistance of plexiglass. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1417–1423, 1999