Preparation of polydimethylaminoethyl methacrylate grafted attapulgite via ceric ion‐induced redox polymerization

Hybrid nanocomposites consisting of polydimethylaminoethyl methacrylate (PDMAEMA) and attapulgite (ATP) were prepared by using a surface thiol‐Ce (IV) redox initiation system via graft from approach. Initially, ATP was chemically modified with γ‐mercaptopropyltrimethoxysilane (MTS) to anchor thiol groups on the surface (ATP‐MTS). Subsequently, surface‐initiated polymerization of dimethylaminoethyl methacrylate was performed by using ATP‐MTS and cerium (IV) ammonium nitrate (CAN) in aqueous nitric acid (HNO₃) to afford hybrid particles (ATP‐g‐PDMAEMA). Evidence of grafting of PDMAEMA was confirmed by Fourier transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), and Thermogravimetric Analysis (TGA). The crystal structure of PDMAEMA grafted ATP was characterized by X‐ray diffraction (XRD) analysis. Morphology of ATP‐g‐PDMAEMA was observed by transmission electron microscopy (TEM). The effects of concentration of Ce (IV), HNO₃, and reaction temperature were examined by determining the percentage of grafting (PG). With other condition kept constant, the optimum conditions were obtained as follows: the reaction temperature was 50°C, Ce (IV) and HNO₃ concentrations were 12.5 mmol/L and 1 mol/L, respectively, when 0.2 g of ATP‐MTS, 1 mL of DMAEMA, and 4 mL of aqueous solution were used. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42762.     

Preparation of monodispersed and lipophilic attapulgite and polystyrene nanorods via surface‐initiated atom transfer radical polymerization

A new kind of initiator, 3‐(2‐bromo‐2‐methylacryloxy)propyltriethysiliane (MPTS‐Br), was prepared with a simply hydrobrominated commercial silane coupling agent (3‐methacryloxy‐proplytriethysilane, MPTS). It has been one‐step self‐assemble onto the surface of attapulgite (ATP) nanorods in the dispersion system, and by using this initiator‐modified nanorod (MPTS‐Br‐modified ATP nanoparticles, ATP‐MPTS‐Br) as macroinitiator for atom transfer radical polymerization (ATRP). Structurally well‐defined homopolymer polystyrene (PS) and block polymer poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) chains were then grown from the needle‐shaped nanorods surface to yield monodispersed nanorods composed of ATP core and thick‐coated polymer shell (ATP and PS). The graft polymerization parameters exhibited the characteristics of a controlled/”living” polymerization. The PS‐grafted ATP nanorods could be dispersed well in organic solvent with nanoscale. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of copolymer grafted magnetic nanoparticles via surface‐initiated nitroxide‐mediated radical polymerization

“Grafting from” surface‐initiated nitroxide‐mediated radical polymerization (SI‐NMRP) techniques were used to synthesize poly[styrene‐co‐(maleic anhydride)] copolymer brushes from the Fe₃O₄ surfaces. Well‐defined polymer chains were grown from the Fe₃O₄ surfaces to yield particles with a Fe₃O₄ core and a polymer outer layer. The observed narrow molecular weight distributions (M_w/M_n), linear kinetic plots and linear plots of molecular weight (M_n) versus conversion for the free polymer indicated that the chain growth from the Fe₃O₄ surface was a controlled process by adding an excess of 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO). The modified nanoparticles were subjected to detailed characterization using XRD, TEM, FT‐IR, and TGA. The analyses of vibration sample magnetometer (VSM) verified that the nanoparticles owned good magnetic property. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Preparation and characterization of polyhydroxyurethane/silica nanocomposites via in situ surface‐initiated polymerization

The polyhydroxyurethane/silica nanocomposite (PHU/SN) was prepared by the in situ surface‐initiated polymerization of a five‐membered cyclic carbonate, 2,2‐bis[p‐(1,3‐dioxolan‐2‐one‐4‐yl‐methoxy)phenyl]propane (B5CC) and hexamethylene diamine, from the surfaces of the aminopropyl silica nanoparticles (APSN) for the first time. The percentage of grafting (PG%) and the grafting efficiency (GE%) of 27% and 19% were calculated from the results of thermogravimetric analysis (TGA), respectively, after the free polyhydroxyurethane was washed off. The chemical grafting of the polymer was also confirmed using Fourier transform infrared (FTIR) and the morphology of the silica nanoparticles in the nanocomposite was characterized by transmission electron microscope (TEM). POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Preparation of poly(methyl methacrylate)‐grafted attapulgite by surface‐Initiated radical polymerization

Poly(methyl methacrylate) (PMMA) was bonded on the surface of attapulgite (ATP) by using an ammonium persulfate amine redox initiation system via grafting from approach. ATP was modified with (3‐aminopropyl)triethoxysilane to anchor amine groups on the surface, and then the amine‐functionalized ATP was further treated with methacryloyl chloride and 4,4′‐azobis(4‐cyanovaleric acid) to give methacryl‐ and azo‐functionalized ATP, respectively. Subsequently, surface‐initiated graft polymerization of MMA in a soap‐free emulsion was performed to afford ATP/PMMA hybrids. Meanwhile, graft polymerizations on the surface of methacryl‐ and azo‐functionalized ATP were carried out for comparison. The grafting of PMMA on the surface of ATP was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis (TGA). The crystal structure of hybrids was characterized by X‐ray diffraction analysis. The morphology of hybrids was observed by scanning electron microscopy and transmission electron microscopy. The degree of grafting obtained from surface‐initiated graft polymerization in a soap‐free emulsion was found to be the greatest (29.4%) estimated from TGA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41062.     

Grafting of hydrophilic monomers onto aminopropyl‐functionalized sodium montmorillonite via surface‐initiated redox polymerization

Hydrophilic polymer/sodium montmorillonite (Na‐MMT) hybrid nanomaterials were prepared via surface‐initiated redox polymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid (PAMPS‐g‐MMT), acrylamide (PAAm‐g‐MMT) and styrenesulfonic acid sodium salt (PSSA‐g‐MMT) from surface of aminopropyl‐functionalized sodium montmorillonite (AMMT) dispersed in an aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and aminopropyl groups on the surface of AMMT were used as oxidant and reducing groups, respectively. AMMT was prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of Na‐MMT. Hydrophilic monomers (AMPS, AAm and SSA) were then grafted onto AMMT dispersed in water via redox initiation at 40 °C. Structure, morphology and thermal properties of the AMMT, PAMPS‐g‐MMT, PAAm‐g‐MMT and PSSA‐g‐MMT hybrid materials were characterized using Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric (TGA) analyses, respectively. FTIR results indicated that hydrophilic monomers were successfully grafted onto the surface of MMT. Grafting amounts of the hydrophilic polymers were estimated from TGA thermograms to be 28.8, 118.8 and 14.4% for PAMPS, PAAm and PSSA, respectively. XRD patterns showed an exfoliated morphology for PAMPS‐ and PAAm‐grafted MMT hybrid nanomaterials and an intercalated/exfoliated morphology for the PSSA‐grafted MMT one. The effect of the nature of hydrophilic monomer on the grafting efficiency is discussed in detail. © 2013 Society of Chemical Industry     

Synthesis and characterization of poly(acrylonitrile)/montmorillonite nanocomposites from surface‐initiated redox polymerization

We have developed a facile method to prepare polyacrylonitrile/montmorillonite (PAN/MMT) nanocomposites using the surface‐initiated redox polymerization of acrylonitrile (AN) in the aqueous phase. The MMT silicate surfaces were first treated with diethanolamine, and the modified MMT (DEA‐MMT) was subsequently used together with the Ce(IV) salt to serve as a redox system. The PAN chains growing on a surface‐tethered DEA expand the interlayer space, and thus lead to intercalated/exfoliated nanocomposites. The nano‐morphology of the prepared nanocomposites depends on the AN/OH molar ratio in feed. An exfoliated PAN/MMT nanocomposite was obtained when the feeding AN/OH molar ratio = 300 was used. The molecular weight of PAN in the nanocomposites prepared by the present method is also dependent on the AN/OH molar ratio in feed and can be up to ca. 160,000 g/mol. The differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA) analyses show that the increasing fraction of exfoliated silicate structures should enhance the contact interface between the silicate and polymer, resulting in the higher glass transition temperature and thermal stability. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of coaxial mullite/polypyrrole fibrous nanocomposites via self‐assembling and in situ surface‐initiated polymerization

After mullite fibers particles (MFPs) were surface modified, conductive polypyrrole (PPy) layer was chemically grafted on the surface of the self‐assembled monolayer (SAM) coated MFPs, via in situ surface‐initiated polymerization, resulting in SAM‐MFPs/PPy composites. The composites possess high electrical conductivity at room temperature, weakly temperature dependence of the conductivity. The nanocomposite electrochemical properties displayed nearly symmetric charge–discharge characteristics and an ideal rectangular cyclic voltammogram. X‐ray diffraction analysis confirmed that the main peaks of SAM‐MFPs/PPy composites are similar to the SAM‐MFPs, which reveal that the crystal structure of SAM‐MFPs is well‐maintained after the coating process under polymerization reaction conditions and exhibit semicrystalline behavior. Thermogravimetric analysis shows that the thermal stability of SAM‐MFPs/PPy composites was enhanced and these can be attributed to the retardation effect of amine functionalized MFPs as barriers for the degradation of PPy. The morphology of SAM‐MFPs/PPy composites showed the coaxial fibrous structure. POLYM. COMPOS., 35:892–899, 2014. © 2013 Society of Plastics Engineers     

Grafting of water‐soluble sulfonated monomers onto functionalized fumed silica nanoparticles via surface‐initiated redox polymerization in aqueous medium

Sulfonated polymer/fumed silica hybrid nanoparticles were prepared via surface‐initiated free radical polymerization of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (PAMPS‐g‐FSN), styrene sulfonic acid sodium salt (PSSA‐g‐FSN) and vinyl sulfonic acid sodium salt (PVSA‐g‐FSN) from the surface of aminopropyl‐functionalized fumed silica nanoparticles (AFSNs) dispersed in aqueous medium. Cerium(IV) ammonium nitrate/nitric acid and sodium dodecyl sulfate were used as redox initiator and stabilizer respectively. AFSNs were prepared by covalently attaching 3‐aminopropyltriethoxysilane onto the surface of fumed silica nanoparticles. Sulfonated monomers (AMPS, SSA or VSA) were then grafted onto the AFSNs ultrasonically dispersed in water via redox initiation at 40 °C. Structure, thermal properties, particle size and morphology of the AFSNs and PAMPS‐g‐FSN, PSSA‐g‐FSN and PVSA‐g‐FSN hybrid nanoparticles were characterized by Fourier transform infrared spectroscopy, TGA, SEM, transmission electron microscopy (TEM) and dynamic light scattering (DLS). The results indicated that the sulfonated monomers were successfully grafted onto the fumed silica nanoparticles. Grafting amounts of the sulfonated polymers onto the fumed silica nanoparticle surface were estimated from TGA thermograms to be 59%, 13% and 29% for the PAMPS, PSSA and PVSA, respectively. From SEM, TEM and DLS analysis, polymer‐grafted fumed silica nanoparticles with an average diameter smaller than 70 nm and a (semi‐) spherical shape were observed. A significant bimodal particle size distribution was observed only for the PAMPS‐g‐FSN with average diameters of 39.6 nm (84.1% per number) and 106 nm (15.9% per number). The hydrophilic sulfonated polymer/grafted fumed silica obtained from the redox graft polymerization gave a stable colloidal dispersion in acidic aqueous medium. Copyright © 2012 Society of Chemical Industry     

Preparation and kinetic characterization of attapulgite grafted with poly(methyl methacrylate) via R-supported RAFT polymerization

Poly(methyl methacrylate) brushes grafted from attapulgite nanoparticles (ATP@PMMA) were prepared by R-Supported reversible addition-fragmentation chain transfer polymerization (RAFT). ATP was firstly activated, and allowed to react with γ-aminopropyltriethoxysilane (APTES), 4,4′-azobis(4-cyanovaleric acid) (ACVA) and bis(thiobenzoyl) disulfide stepwise to afford 4-cyanopentanoic acid dithiobenzoate functionalized ATP (ATP-CPADB). Then, RAFT polymerizations of MMA mediated by the different systems were conducted and compared systemically. The grafting process was verified by FTIR, XRD, XPS, TGA and TEM data. Kinetic behavior indicated that the anchored CPADB is more effective before diffusing into the bulk phase. The grafting ratio (G _r), while M _n of grafted and free polymer increased linearly with increasing monomer conversion in presence of free CPADB, giving the hybrid particles with more homogeneous distribution of grafted polymer layer.     

Novel comb‐structured‐polymer‐grafted carbon black by surface‐initiated atom transfer radical polymerization and ring‐opening polymerization

Novel comb‐structured‐polymer‐grafted carbon black (CB) was synthesized with a combination of surface‐initiated atom transfer radical polymerization and ring‐opening polymerization. First, poly(2‐hydroxyethyl methacrylate) (PHEMA) was grafted onto the CB surface by surface‐initiated atom transfer radical polymerization. The prepared CB‐g‐PHEMA contained 35.6–71.8% PHEMA, with the percentage depending on the molar ratio of the reagents and the reaction temperature. Then, with PHEMA in CB‐g‐PHEMA as the macroinitiator, poly(?‐caprolactone) (PCL) was grown from the CB‐g‐PHEMA surface by ring‐opening polymerization in the presence of stannous octoate. CB‐g‐PHEMA and CB‐g‐(PHEMA‐g‐PCL) were characterized with Fourier transform infrared, ¹H‐NMR, thermogravimetric analysis, dynamic light scattering, and transmission electron microscopy. The resultant grafted CB had a shell of PHEMA‐g‐PCL. On the whole, the CB nanoparticles were oriented in dendritic lamellae formed by these shells. This hopefully will result in applications in gas sensor materials and nanoparticle patterns. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Shape control synthesis of polymeric hybrid nanoparticles via surface‐initiated atom‐transfer radical polymerization

Polymeric hybrid nanoparticles were synthesized via surface‐initiated atom‐transfer radical polymerization (SI‐ATRP) method on the surface of gold nanoparticles in cyclohexanone. Tetraoctyl ammonium bromide (TOAB) as a phase transfer agent was used to transfer the gold nanoparticles into cyclohexanone, which will be replaced by disulfide initiator on the surface of gold nanoparticles. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and UV–vis spectroscopy were utilized to characterize the product to make sure the experiment had been conducted. The results showed that the polymeric gold hybrid nanoparticles with different structures could be controlled by adjusting the ratio of initiator and gold nanoparticles in ATRP. If the ratio is very little, asymmetric polystyrene–gold hybrid nanoparticles were synthesized, and a single gold nanoparticle was attached with a polystyrene sphere. If the ratio becomes larger, core–shell polystyrene–gold nanocomposite particles were obtained resulting in gold nanoparticle encapsulated by a uniform polymer shell. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43584.     

Preparation and characterization of polystyrene–clay nanocomposites by free‐radical polymerization

The polymerizable cationic surfactant, vinylbenzyldimethylethanolammouium chloride (VBDEAC), was synthesized to functionalize montmorillonite (MMT) clay and used to prepare exfoliated polystyrene–clay nanocomposites. The organophilic MMT was prepared by Na⁺ exchanged montmorillonite and ammonium cations of the VBDEAC in an aqueous medium. Polystyrene–clay nanocomposites were prepared by free‐radical polymerization of the styrene containing intercalated organophilic MMT. Dispersion of the intercalated montmorillonite in the polystyrene matrix determined by X‐ray diffraction reveals that the basal spacing is higher than 17.6 nm. These nanocomposites were characterized by differential scanning calorimetry (DSC), transmission electron micrograph (TEM), thermal gravimetric analysis (TGA), and mechanical properties. The exfoliated nanocomposites have higher thermal stability and better mechanical properties than the pure polystyrene. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1370–1377, 2002     

Silica/polystyrene and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane hybrid nanoparticles via surface‐initiated ATRP and comparison of their wettabilities

Both silica/polystyrene (SiO₂/PS) and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane (SiO₂/PS‐b‐PMPTS) hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization (SI‐ATRP) from SiO₂ nanoparticles. The growths of all polymers via ATRP from the SiO₂ surfaces were well controlled as demonstrated by the macromolecular characteristics of the grafted chains. Their wettabilities were measured and compared by water contact angle (WCA) and surface roughness. The results show that the nanoparticles possess hydrophobic surface properties. The static WCA of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is smaller than that of SiO₂/PS hybrid nanoparticles, meanwhile, the surface roughness of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is yet slightly rougher than that of SiO₂/PS hybrid nanoparticles, which shows that the combination and competition of surface chemistry and roughness of a solid material can finally determine its wettability. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Modification of polysulfone membranes via surface‐initiated atom transfer radical polymerization and their antifouling properties

Surface‐initiated atom transfer radical polymerization (ATRP) was used to tailor the functionality of polysulfone (PSF) membranes. A simple one‐step method for the chloromethylation of PSF under mild conditions was used to introduce surface benzyl chloride groups as active ATRP initiators. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol)monomethacrylate and 2‐hydroxyethyl methacrylate and their block copolymer brushes were prepared via surface‐initiated ATRP from the chloromethylated PSF surfaces. A kinetic study revealed that the chain growth from the membranes was consistent with a controlled process. X‐ray photoelectron spectroscopy was used to characterize the surface‐modified membrane after each modification stage. Protein adsorption experiments revealed substantial antifouling properties of the grafted PSF membranes in comparison with the those of the pristine PSF surface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation magnetite core/coated with polystyrene shell hybrid materials via redox interfacial‐initiated emulsion polymerization

In this article, we describe a novel redox interfacial‐initiated micro‐emulsion polymerization (RIEP) to prepare hollow polystyrene microspheres with magnetite nanoparticles (MPs) core and polystyrene (PS) shell (MPs‐PS) under ambient pressure. The emulsion was constituted water‐based magnetic ferro‐fluid as dispersing phase and organic solvent and styrene (St) as continuous phase. Cumene hydroperoxide (CHPO)/iron (II) sulfates (FS) as the redox initiation system, the water‐soluble FS acted as the reducing component and the oil‐soluble CHPO as the oxidant component of the redox initiation system. Therefore, the primary radicals are produced mainly at the oil/water interface to initiate the polymerization of styrene to form polymer shell. The final products thoroughly characterized by X‐ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, field‐emission scanning electron microscopy, thermogravimetric analysis, dynamic light scattering, and X‐ray photoelectron spectroscopy, which showed the formation of hollow magnetite/polystyrene nanocomposite microspheres. Magnetic measurements were carried out at room temperature using a vibrating sample magnetometer. The saturation magnetization (M_s), remanent magnetization (M_r) and coercivity (H_c) is 30 emu/g, 15 emu/g and 370 Oe, respectively. The results revealed that the hybrid materials microspheres were super‐paramagnetic. POLYM. COMPOS., 31:1846–1852, 2010. © 2010 Society of Plastics Engineers     

Synthesis of polymer–inorganic hybrid nanoparticles via radical polymerization initiated by surface‐immobilized photoiniferter

Polymer–inorganic hybrid nanoparticles were prepared through radical photo‐polymerization of methyl methacrylate initiated by N,N‐diethyldithiocarbamyl surface functionalized silica nanoparticles under UV irradiation at ambient temperature. IR analysis and UV spectroscopy confirmed the occurrence of Et₂NCS₂—end groups on the resulting poly(methyl methacrylate), and the morphology of these hybrid nanoparticles was observed directly by means of tapping mode atomic force microscopy (AFM). Copyright © 2003 Society of Chemical Industry     

Preparation of polystyrene–graphite conducting nanocomposites via intercalation polymerization

In situ polymerization of styrene was conducted in the presence of expanded graphite obtained by rapid heating of a graphite intercalation compound (GIC), to form a polystyrene–expanded graphite conducting composite. The composite showed excellent electrically conducting properties even though the graphite content was much lower than in normal composites. The transition of the composite from an electrical insulator to an electrical semiconductor occurred when the graphite content was 1.8 wt%, which is much lower than that of conventional conducting polymer composites. TEM, SEM and other studies suggest that the graphite was dispersed in the form of nanosheets in a polymer matrix with a thickness of 10–30 nm, without modification of the space between carbon layers and the structure of the graphite crystallites. The composite exhibited high electrical conductivity of 10^?2 S cm^?1 when the graphite content was 2.8–3.0 wt%. This great improvement of conductivity could be attributed to the high aspect ratio (width‐to‐thickness) of the graphite nanosheets. The rolling process strongly affected the conductivity and the mechanical properties of the composite. © 2001 Society of Chemical Industry     

Synthesis and characterization of poly(γ‐methacryloxypropyltrimethoxysilane)‐grafted silica hybrid nanoparticles prepared by surface‐initiated atom transfer radical polymerization

Poly(γ‐methacryloxypropyltrimethoxysilane) (PMPTS)‐grafted silica hybrid nanoparticles were prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The resulting PMPTS‐grafted silica hybrid nanoparticles were characterized using Fourier transform infrared spectroscopy (FTIRS), nuclear magnetic resonance (NMR), gel permeation chromatography (GPC), X‐ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), scanning electron microscopy (SEM), static water contact angle (WCA) measurement, and thermogravimetric analysis (TGA). Combined FTIRS, NMR, XPS, SEM, and TGA studies confirmed that these hybrid nanoparticles were successfully prepared by surface‐initiated ATRP. SEM and AFM studies revealed that the surfaces of the nanoparticles were rough at the nanoscale. In addition, the results of the static WCA measurements showed that the nanoparticles are of low surface energy and their surface energy reaches as low as 6.10 mN m^?1. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012