Evaluation of the confinement effect of nanoclay on the kinetics of styrene atom transfer radical polymerization

The grafting through method was employed to study the effect of nanoclay confinement on the atom transfer radical polymerization (ATRP) of styrene. An ammonium salt containing a double bond on its structure was used as a clay modifier. Employing ATRP to polymerize styrene in the presence of modified montmorillonite resulted in a finely well‐defined polystyrene nanocomposite. The gas chromatography (GC) results showed the linear increase of ln(M₀/M) versus time, which indicated the controlled behavior of the polymerization. Another confirmation of the living nature of the polymerization was the linear increase of molecular weight against monomer conversion concluded from the gel permeation chromatography (GPC) data. Nanoclay exerted acceleration on the polymerization of free polystyrene chains. The polydispersity indexes of polymer chains increased by the addition of nanoclay. In the case of clay‐attached polystyrene chains, number and weight‐average molecular weights were lower than that of freely dispersed polystyrene chains. The polydispersity index of the clay‐attached chains was higher in respect to the freely dispersed polystyrene chains. The living nature of polymer chains was more elucidated by Fourier transform infrared spectroscopy (FTIR). Exfoliation of the clay layers in the polymer matrix of polystyrene nanocomposite containing the lowest amount of nanoclay has proven by Transmission Electron Microscopy (TEM). © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Edge‐functionalized graphene nanoplatelets with polystyrene by atom transfer radical polymerization: grafting through carboxyl groups

The surface modifier 3‐((4‐hydroxybutoxy)dimethylsilyl)propyl methacrylate (CD), which contains a double bond and a hydroxyl group, was synthesized through a coupling reaction of 1,4‐butanediol and (3‐methacryloxypropyl)dimethylchlorosilane. Subsequently, graphene oxide (GO) was functionalized with different amounts of CD from its edge carboxyl groups. Then, grafting through atom transfer radical polymerization of styrene in the presence of various amounts of the edge‐functionalized GO was carried out to evaluate the effect of graphene loading along with graft density. A peak at 3.8 ppm in the ¹H NMR spectrum of CD associated with the methylene adjacent to the Si–O group indicated a successful coupling reaction. Attachment of CD on the edges of GO was evaluated using X‐ray photoelectron and Fourier transform infrared spectroscopies. Expansion of GO interlayer spacing by functionalization was evaluated using X‐ray diffraction. The ordered and disordered crystal structure of carbon was studied using Raman spectroscopy. The close I_D/I_G values for GO and various kinds of functionalized graphenes show the preserved graphitic crystallite size. Relaxation behaviour of polystyrene chains in the presence of graphene nanoplatelets and also the effect of graft content on chain confinement were studied using differential scanning calorimetry. High‐graft‐density nanocomposites show higher glass transition temperatures. Morphology of graphene nanoplatelets was studied using scanning electron and transmission electron microscopies. The flat and smooth morphology of graphene nanoplatelets is disturbed and also the transparency of the nanoplatelets decreases during the oxidation and functionalization processes. © 2014 Society of Chemical Industry     

Synthesis of hybrid free and nanoporous silica aerogel‐anchored polystyrene chains via in situ atom transfer radical polymerization

Polystyrene nanocomposite with mixed free and anchored chains was synthesized by atom transfer radical polymerization. Attachment of 3‐(trimethoxysilyl)propyl methacrylate with a double bond on the nanoporous silica aerogel surface results in a double bond grafted silica aerogel which could be incorporated into the polystyrene chains by a grafting‐through process. Conversion and molecular weight evaluation was carried out using gas chromatography and gel permeation chromatography, respectively. Double bond containing silica aerogel has an inconsiderable effect on conversion. There is no considerable discrepancy between the molecular weights of the free and anchored chains. Addition of silica aerogel with pendant CC bonds leads to increase of apparent rate constant of polymerization and also molecular weights. This is mainly because of initiator trapping in silica aerogel pores. Every percent of double bond containing silica aerogel with respect to styrene results in trapping of about 0.08 mol of ethyl alpha‐bromoisobutyrate among the silica pores. POLYM. COMPOS., 34:1648–1654, 2013. © 2013 Society of Plastics Engineers     

Synthesis and characterization of graft copolymers of syndiotactic polystyrene with polybutadiene and 4‐methylstyrene

The basic method for synthesizing syndiotactic polystyrene‐g‐polybutadiene graft copolymers was investigated. First, the syndiotactic polystyrene copolymer, poly(styrene‐co‐4‐methylstyrene), was prepared by the copolymerization of styrene and 4‐methylstyrene monomer with a trichloro(pentamethyl cyclopentadienyl) titanium(IV)/modified methylaluminoxane system as a metallocene catalyst at 50°C. Then, the polymerization proceeded in an argon atmosphere at the ambient pressure, and after purification by extraction, the copolymer structure was confirmed with ¹H‐NMR. Lastly, the copolymer was grafted with polybutadiene (a ready‐made commercialized unsaturated elastomer) by anionic grafting reactions with a metallation reagent. In this step, poly(styrene‐co‐4‐methylstyrene) was deprotonated at the methyl group of 4‐methylstyrene by butyl lithium and further reacted with polybutadiene to graft polybutadiene onto the deprotonated methyl of the poly(styrene‐co‐4‐methylstyrene) backbone. After purification of the graft copolymer by Soxhlet extraction, the grafting reaction copolymer structure was confirmed with ¹H‐NMR. These graft copolymers showed high melting temperatures (240–250°C) and were different from normal anionic styrene–butadiene copolymers because of the presence of crystalline syndiotactic polystyrene segments. Usually, highly syndiotactic polystyrene has a glass‐transition temperature of 100°C and behaves like a glassy polymer (possessing brittle mechanical properties) at room temperature. Thus, the graft copolymer can be used as a compatibilizer in syndiotactic polystyrene blends to modify the mechanical properties to compensate for the glassy properties of pure syndiotactic polystyrene at room temperature. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Chemical Functionalization of Graphene Oxide by Poly(styrene sulfonate) Using Atom Transfer Radical and Free Radical Polymerization: A Comparative Study

Poly(sodium styrenesulfonate)-functionalized graphene was prepared from graphene oxide, using atom transfer radical polymerization and free radical polymerization. In atom transfer radical polymerization route, the amine-functionalized GO was synthesized through hydroxyl group reaction of GO with 3-amino propyltriethoxysilane. Atom transfer radical polymerization initiator was grafted onto modified GO (GO-NH₂) by reaction of 2-bromo-2-methylpropionyl bromide with amine groups, then styrene sulfonate monomers were polymerized on the surface of GO sheets by in situ atom transfer radical polymerization. In free radical polymerization route, the poly(sodium 4-styrenesulfonate) chains were grafted on GO sheets in presence of Azobis-Isobutyronitrile as an initiator and styrene sulfonate monomer in water medium. The resulting modified GO was characterized using range of techniques. Thermal gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy results indicated the successful graft of polymer chains on GO sheets. Thermogravimetric analysis showed that the amount of grafted polymer was 22.5 and 31?wt% in the free radical polymerization and atom transfer radical polymerization methods, respectively. The thickness of polymer grafted on GO sheets was 2.1?nm (free radical polymerization method) and 6?nm (atom transfer radical polymerization method) that was measured by atomic force microscopy analysis. X-ray diffractometer and transmission electron microscopy indicated that after grafting of poly(sodium 4-styrenesulfonate), the modified GO sheets still retained isolated and exfoliated, and also the dispersibility was enhanced.     

In‐plane functionalizing graphene nanolayers with polystyrene by atom transfer radical polymerization: Grafting from hydroxyl groups

Graphene oxide (GO) was prepared from the oxidation of graphite and then it was functionalized with (3‐aminopropyl)triethoxysilane (APTES) from hydroxyl groups by a coupling reaction. Subsequently, alpha‐bromoisobutyryl bromide (BiBB) was attached to the APTES groups to yield initiator anchored graphene nanolayers (GOHBr). Then, GOHBr was used in different amounts as the precursor for atom transfer radical polymerization of styrene to evaluate the effect of graphene loading along with the graft density on the properties of final product. Successful in‐plain attachment of APTES, BiBB, and polystyrene to GO was evaluated by Fourier transform infrared spectroscopy. Graphene interlayers expansion by oxidation and functionalization processes was evaluated using X‐ray diffraction. The ordered and disordered crystal structures of carbon were evaluated by Raman spectroscopy. Morphology of graphene nanolayers was studied by scanning electron microscopy and also transmission electron microscopy. POLYM. COMPOS., 35:386–395, 2014. © 2013 Society of Plastics Engineers     

Grafting polystyrene with various graft densities through epoxy groups of graphene nanolayers via atom transfer radical polymerization

A double bond and amine group containing chemical (OD) was synthesized by coupling reaction of ethylenediamine and 3‐(chlorodimethylsilyl)propyl methacrylate. Subsequently, graphene oxide (GO) was functionalized with OD in different densities via ring opening of its epoxy groups. The graphene containing double bond (GOD) was incorporated into polystyrene (PS) chains by a grafting through atom transfer radical polymerization. Grafting of OD at the surface of GO was confirmed by Fourier transform infrared spectroscopy and thermogravimetric analysis (TGA). The interlayer spacing of the graphenes was evaluated by X‐ray diffraction. Molecular weight and PDI values of the free and attached PS chains were studied by size exclusion chromatography. TGA was also used to study the degradation points, char values, and grafting ratios. Relaxation of PS chains in the presence of graphene layers was evaluated by differential scanning calorimetry. Scanning electron and transmission electron microscopies show that flat graphene layers are wrinkled during oxidation and functionalization processes. POLYM. COMPOS., 38:2450–2458, 2017. © 2015 Society of Plastics Engineers     

Free‐radical bulk polymerization of styrene with a new trifunctional cyclic peroxide initiator

The bulk free‐radical polymerization of styrene in the presence of a new cyclic trifunctional initiator, 3,6,9‐triethyl‐3,6,9‐trimethyl‐1,4,7‐triperoxonane, was studied. Full‐conversion‐range experiments were carried out to assess the effects of the temperature and initiator concentration on the polymerization kinetics, molecular weight, and polydispersity. Gel permeation chromatography was used to measure the molecular weight and the molecular weight distribution of polystyrene. When this multifunctional initiator was used for styrene polymerization at higher temperatures, it was possible to produce polymers with higher molecular weights and narrower molecular weight polydispersity at a higher rate. This showed that the molecular weight and polydispersity were influenced by the initiator concentration and the polymerization temperature in an unusual manner. Moreover, polystyrene, obtained with trifunctional peroxide, had O? O bonds in the molecular chains and was investigated with differential scanning calorimetry and gel permeation chromatography. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1035–1042, 2004     

Effect of reaction conditions on grafting ratio and properties of starch nanocrystals‐g‐polystyrene

Starch nanocrystals‐g‐polystyrene (StN‐g‐PS) was synthesized by free radical emulsion copolymerization of starch nanocrystals with styrene. The effect of polymerization conditions on grafting efficiency (GE) and grafting ratio (GR) were investigated. It was found that during graft copolymerization procedure both GE and GR increase with increasing monomer concentration and reaction time. As a result the high GE and high GR can be achieved. The good linear fit of the GR with A_St/A_OH (the absorption strength ratio of aromatic ring peaks and hydroxyl group peaks) confirmed that during graft copolymerization, FTIR spectra can be used as a simple method for determining GR. X‐ray diffraction showed that the crystallinity of StN‐g‐PS decreased slightly with increasing GR. Grafted polystyrene side chains can improve the interface compatibility of starch nanocrystals with the hydrophobic polymer matrix. The mechanical properties of StN‐g‐PS/rubber nanocomposites can be obviously enhanced. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40571.     

Polystyrene-attached graphene nanolayers by reversible addition-fragmentation chain transfer polymerization: a grafting from epoxy groups with various densities

Graphene oxide was chemically functionalized with a modifier synthesized from coupling reaction of ethylenediamine and 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid in low and high graft densities. Then, the modified graphenes were used in grafting from reversible addition-fragmentation chain transfer polymerization of styrene. Successful synthesis and grafting of modifier was approved by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). Also, FTIR, X-ray photo electron spectroscopy, and Raman spectroscopy were used to confirm the successful grafting of modifier moieties. Molecular weight and polydispersity index of attached polystyrene chains were studied by size exclusion chromatography. Thermogravimetric analysis was used to investigate the degradation temperatures, char contents, and graft ratios. Weight ratio of modifier in modified graphenes is calculated to be 4.93 × 10^?2 and 12.23 × 10^?2 for low and high graft densities. Also, molar ratio of modifier is 121.22 and 300.71 μmol/g respectively. Scanning electron and transmission electron microscopies show that graphite layers with flat surface were wrinkled during the oxidation process and also polystyrene-grafted graphenes are observed as opaque layers.     

Synthesis of graft copolymers based on polyphenylene xylylene and fullerene grafted polystyrene

Graft copolymers containing poly(phenylene xylyene) (PPX) backbone and polystyrene fullerene (PSFu) grafting chains (PPX‐g‐PSFu) were prepared by using a purposed synthetic route comprising a combination of reaction mechanisms namely the modified Wessling route, an iniferter polymerization, and an atom transfer radical addition (ATRA). The monomer was first prepared by reacting dichloroxylene with tetrahydrothiophene. After that the monomer was polymerized in a sodium hydroxide solution to provide a polymer precursor. Subsequently, the polymer precursor was modified by reacting it with a dithiocarbamate (DTC) compound. The macroiniferter was obtained and then copolymerized with styrene and chloromethylstyrene via an iniferter polymerization. Finally, the graft copolymer was reacted with fullerene through an ATRA technique to attach the C60 groups onto the graft copolymer molecule. The products obtained from each of the steps were characterized by using various techniques including Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, gel permeation chromatography, differential scanning calorimetry, UV–visible spectroscopy, and thermal gravimetric analysis. The aforementioned results suggest that the graft copolymers were prepared. The grafting yield and grafting efficiency were found to increase with the monomers concentration and the amount of DTC used. Some homopolymer contaminants also occurred but those could be minimized and subsequently removed by extraction with selective solvents. These graft copolymer products might be used for the development of a bulk heterojunction polymer solar cell. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Surface modification of natural substrates by atom transfer radical polymerization

Surface modification of various solid polysaccharide substrates was conducted by grafting methyl acrylate (MA) and styrene via atom transfer radical polymerization (ATRP) to produce well‐defined polymer grafts. The hydroxyl groups on the surfaces of the substrates were reacted with 2‐bromoisobutyryl bromide followed by graft copolymerization under ATRP conditions. The studied substrates were filter paper, microcrystalline cellulose, Lyocell fibers, dialysis tubing, and chitosan films. The modified substrates were analyzed by FT‐IR, water contact angle measurements, TGA, and SEM. FT‐IR characterization of the grafted substrates showed significant differences between the different substrates in the amount of grafted polymer. Higher amounts of polymer seem to be possible to graft from native cellulose substrates than from regenerated cellulose substrates. To investigate whether the grafted polymers were “living” after a longer time period, a second layer of polystyrene was grafted from a filter paper modified with PMA one year ago. FT‐IR characterization of the filter paper showed a peak corresponding to styrene, indicating that a block copolymer had been formed on the surface. Graft copolymerization can be used to change and tailor the surface properties of the polysaccharide substrates. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4155–4162, 2006     

Structure and properties of cellulose graft copolymers. I. Radiation-induced rayon–styrene graft copolymer

Rayon–styrene graft copolymers were prepared by the direct radiation method, with the use of the preswelling technique, by irradiation with γ-rays from ⁶⁰Co. The grafting was carried out in bulk styrene and in styrene–solvent mixtures, such as styrene–methanol and styrene–acetone, to study their effect on the graft copolymerization reaction and the structure of the resulting graft copolymer. The effects of carbon tetrachloride, a chain-transfer agent, was also investigated. Three different types of rayon yarn were used; Fortisan, a modifier-type high wet-modulus rayon, and a high-tenacity tire yarn, in order to study the effect of rayon microstructure on the grafting reaction. The molecular structure of the rayon–styrene graft copolymers was studied by hydrolyzing away the cellulose backbone and measuring the molecular weights of the grafted polystyrene branches. For grafting in bulk styrene, the molecular weights of the grafted polystyrene ranged from 400,000 to 1,000,000, while those of the polystyrene homopolymer formed in the outside solution were of the order of 30,000–50,000. The molecular weights of the grafted polystyrene branches tended to increase with per cent grafting in the graft copolymer. For grafting in styrene–methanol and styrene–acetone mixtures, the molecular weights of the polystyrene branches decreased with increasing solvent content. The addition of carbon tetrachloride to bulk styrene resulted in a sharp decrease in the molecular weights of the grafted branches. The grafting frequency or number of polystyrene branches per cellulose chain was calculated from the per cent grafting and the molecular weights of the polystyrene branches. The morphology of the rayon–styrene graft copolymers and some of their physical properties are discussed.     

Controlling the phase stability of polymer blends through the introduction of impenetrable interfaces

In this work, the effect of the introduction of modified solid surfaces into polymer blends on the phase‐separation process was investigated. Glass fibers with surfaces having different chemistries were introduced into polystyrene–poly(methyl methacrylate) blends. The glass fibers used either had fully hydrated surfaces or had surfaces covered with a random copolymer, poly(styrene‐co‐methyl methacrylate). The copolymer was synthesized by free‐radical polymerization of styrene and methyl methacrylate in the presence of previously vinyl silane‐treated glass fibers. The copolymerization and grafting procedures were investigated by FTIR and thermal analysis. Blends containing the fibers were studied using FTIR microscopy and optical microscopy. FTIR microscopy results showed that the composition of the phases in the blends was shifted by using fibers with different surface chemistries. Fibers with grafted copolymers were capable of narrowing the immiscibility region in the phase diagram, while fully hydrated fibers were able to expand the gap. It was proposed that interfacial interactions regulated by a hydrophilic–hydrophobic type of forces were responsible for guiding the described phase‐separation process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1619–1627, 2003     

Initiation of surface graft polymerization by ceric ions on polymer microspheres

The surface graft polymerization of acrylamide on poly(styrene‐co‐acrylonitrile) copolymer microspheres by the initiation of ceric ions was studied. The grafting was verified by IR spectra and X‐ray photoelectron spectroscopy measurements. The resultant microspheres with surface‐grafted polymer chains were employed in the preparation of polymer‐microsphere‐supported palladium composite particles. The composite particles were then studied by transmission electron microscopy and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 936–940, 2003     

Heterogeneous bulk polymerization of styrene in the presence of polybutadiene: Calculation of the macromolecular structure

A mathematical model is presented that simulates the polymerization of styrene in the presence of polybutadiene (PB) for producing high‐impact polystyrene (HIPS) via the heterogeneous bulk process. The model follows the polymerization in two phases; and calculates in each phase the main reaction variables and the molecular structure of the three polymeric components: free polystyrene (PS), unreacted PB, and graft copolymer. Two polymerizations (at 90 and 120°C) were carried out and simulated. The model was validated with measurements of the monomer conversion, the grafting efficiencies, and the average molecular weights. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3023–3039, 2006     

Atom transfer radical polymerization of styrene initiated by bromoacetylated syndiotactic polystyrene macroinitiator

Atom transfer radical polymerization of styrene was conducted with bromoacetylated syndiotactic polystyrene as macroinitiator and copper bromide combined with N,N,N′,N′,N′‐pentamethyldiethylenetriamine as catalyst. A two‐stage process has been developed to synthesize the macroinitiator. First, syndiotactic polystyrene (sPS) was functionalized in the side phenyl rings with acetyl groups using the Friedel–Crafts reaction; second, the acetyl groups were converted to bromoacetyl groups by an acid‐catalyzed halogenation reaction. The initiator was found to be active in the polymerization of styrene, leading to the production of graft chains with well‐defined structure. The molecular weight and molecular weight distribution of the graft chains were determined using gel permeation chromatography after cleaving from the sPS backbone using peroxide acid oxidation followed by hydrazine‐catalyzed hydrolysis. The results indicated that the polymerization process was characteristic of a ‘living’ nature. Copyright © 2007 Society of Chemical Industry     

Graft polymerization of vinyl acetate onto silica

The free‐radical graft polymerization of vinyl acetate onto nonporous silica particles was studied experimentally. The grafting procedure consisted of surface activation with vinyltrimethoxysilane, followed by free‐radical graft polymerization of vinyl acetate in ethyl acetate with 2,2′‐azobis(2,4‐dimethylpentanenitrile) initiator. Initial monomer concentration was varied from 10 to 40% by volume and the reaction was spanned from 50 to 70°C. The resulting grafted polymer, which was stable over a wide range of pH levels, consisted of polymer chains that are terminally and covalently bonded to the silica substrate. The experimental polymerization rate order, with respect to monomer concentration, ranged from 1.61 to 2.00, consistent with the kinetic order for the high polymerization regime. The corresponding rate order for polymer grafting varied from 1.24 to 1.43. The polymer graft yield increased with both initial monomer concentration and reaction temperature, and the polymer‐grafted surface became more hydrophobic with increasing polymer graft yield. The present study suggests that a denser grafted polymer phase of shorter chains was created upon increasing temperature. On the other hand, both polymer chain length and polymer graft density increased with initial monomer concentration. Atomic force microscopy–determined topology of the polymer‐grafted surface revealed a distribution of surface clusters and surface elevations consistent with the expected broad molecular‐weight distribution for free‐radical polymerization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 300–310, 2003     

The influence of nanosilica on styrene free radical polymerization kinetics

A series of nanocomposites were prepared by in situ polymerization of styrene with different silica content (1, 3, and 5 wt%) with an average particle size of 7 nm. The influence of nanosilica content on the kinetics of styrene free radical bulk polymerization was studied by isothermal differential scanning calorimetry (DSC) at different temperatures (70, 80, and 90°C). Using appropriate kinetic model, describing two reactions observed during styrene polymerization (the first‐order reaction and autoacceleration), it was found that silica presence does not affect the apparent activation energies of both processes. The adsorption of styrene on the silica surface caused the formation of interfacial layer in the structure of hybrid materials. Using suggested equation, the thickness of the interfacial layer was determined to investigate its influence on the glass transition temperature of polystyrene (T_g), which was found not to be affected by silica addition. POLYM. COMPOS., 2012. © 2011 Society of Plastics Engineers     

A comparative study on effects of two kinds of polymerization methods on grafting of polymer onto silica surface

In this article we present the result of a comparative study of two kinds of polymerization methods—solution polymerization (sol. poly.) and dispersion polymerization (dis. poly.) for grafting polymer onto silica. As a model for the grafting polymerization reaction, styrene was chosen as the monomer and azo diisobutyronitrile (AIBN) as the initiator. The study aims at supplying theoretical reference for better selecting polymerization method to graft polymer on the silica particle surface. First, monolayers of 3‐methacryloylpropyl trimethoxysilane were chemically bonded onto the surfaces of micrometer‐sized silica gel particles, and so double bonds were immobilized onto the silica surface. Second, the copolymerizations between the immobilized double bonds and the monomer styrene were carried out, homopolymerizations of styrene followed, and finally polystyrene was grafted to the silica surfaces. Two kinds of polymerization methods, sol. poly. and dis. poly., were adopted respectively, and the effects of polymerization methods on grafting process were examined mainly. At the same time, the effects of different polymerization conditions on the grafting degree were researched. It was found that in the dis. poly. system the grafting degree is obviously higher than that in the sol. poly. system under the same polymerization conditions, and the grafting degree can go up to 47%, i.e. 47g/100g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5808–5817, 2006