Inducement of Itinerant Electron Transport in Charge-Ordered Pr<Subscript>0.6</Subscript>Ca<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> by Ba Doping

The effects of Ba ²⁺ doping on the electrical and magnetic properties of charge-ordered Pr_0.6Ca_0.4MnO₃ were investigated through electrical resistivity and AC susceptibility measurements. X-ray diffraction data analysis showed an increase in unit cell volume with increasing Ba ²⁺ content indicating the possibility of substituting Ba ²⁺ for the Ca-site. Electrical resistivity measurements showed insulating behavior and a resistivity anomaly at around 220 K. This anomaly is attributed to the existence of charge ordering transition temperature, \(T^{\mathrm {R}}_{\text {CO}}\) for the x = 0 sample. The Ba-substituted samples exhibited metallic to insulator transition (MI) behavior, with transition temperature, T _MI, increasing from ～98 K (x = 0.1) to ～122 K (x = 0.3). AC susceptibility measurements showed ferromagnetic to paramagnetic (FM-PM) transition for Ba-substituted samples with FM-PM transition temperature, T _c, increasing from ～121 K (x = 0.1) to ～170 K (x = 0.3), while for x = 0, an antiferromagnetic to paramagnetic transition behavior with transition temperature, T _N, ～170 K was observed. In addition, inverse susceptibility versus T plot showed a deviation from the Curie–Weiss behavior above T _c, indicating the existence of the Griffiths phase with deviation temperature, T _G, increasing from 160 K (x = 0.1) to 206 K (x = 0.3). Magnetoresistance, MR, behavior indicates intrinsic MR mechanism for x = 0.1 which changed to extrinsic MR for x > 0.2 as a result of Ba substitution. The weakening of charge ordering and inducement of ferromagnetic metallic (FMM) state as well as increase in both T _c and T _MI are suggested to be related to the increase of tolerance factor, τ, and increase of e _g ?electron bandwidth as average ionic radius at A-site, <r _A> increased with Ba substitution. The substitution may have reduced MnO₆ octahedral distortion and changed the Mn–O–Mn angle which, in turn, promotes itinerancy of charge carrier and enhanced double exchange mechanism. On the other hand, increase in A-site disorder, which is indicated by the increase in σ ² is suggested to be responsible for the widening of the difference between T _c and T _MI.     

High-temperature heat capacity and vibrational spectra of Eu<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Eu₂Sn₂O₇ compound has been prepared by solid-state reaction (by sequentially firing a stoichiometric mixture of Eu₂O₃ and SnO₂ in air at 1273 and 1473 K) and its heat capacity has been determined by differential scanning calorimetry in the temperature range 370–1000 K. The heat capacity data have been used to evaluate the thermodynamic properties of europium stannate: enthalpy increment H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and reduced Gibbs energy Ф°(T). Raman spectra of Eu₂Sn₂O₇ polycrystals with the pyrochlore structure have been measured in the range 200–1200 cm^–1.     

Thermal Dissociation of RMnO<Subscript>3</Subscript> (R = Dy,Yb, Lu)

The phase equilibria involved in the thermal dissociation of RMnO₃ (R = Dy, Yb, Lu) were studied in the range 973–1173 K by a static method in a vacuum circulation unit and by x-ray diffraction analysis of quenched solid phases. The RMnO₃ manganites were shown to dissociate by the reaction RMnO₃ = 1/2R₂O₃ + MnO + 1/4O₂. The temperature dependences of the equilibrium oxygen pressure and Gibbs energy change in this reaction were determined for the three compounds. The experimental data were used to evaluate the standard thermodynamic functions of formation of RMnO₃ from R₂O₃ and Mn₂O₃: ΔH⁰(T) = ?88.93 kJ/mol, Δ S⁰(T) = 46.56 J/(mol K) for DyMnO₃; ΔH⁰(T) = ?130.95 kJ/mol, Δ S⁰(T) = 86.25 J/(mol K) for YbMnO₃; ΔH⁰(T) = ?142.94 kJ/mol, Δ S⁰(T) = 102.87 J/(mol K) for LuMnO₃.     

Temperature effect on the photoluminescence intensity and Eu<Superscript>2+</Superscript> excited state lifetime in EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript> and EuGa<Subscript>2</Subscript>S<Subscript>4</Subscript>:Er<Superscript>3+</Superscript>

The photoluminescence (PL) spectra and Eu²⁺ excited state lifetime of EuGa₂S₄ and EuGa₂S₄:Er³⁺ have been studied in the range 78–500 K. The spectra show a band at 545 nm, due to the 4f ⁶5d → 4f ⁷(⁸ S _7/2) transition. With increasing temperature, the full width at half maximum Γ(T) of the PL band of EuGa₂S₄ and EuGa₂S₄:Er³⁺ crystals increases from 0.15 to 0.22 and from 0.13 to 0.19 eV, respectively. Over the entire temperature range studied, Γ(T) is a linear function of T ^1/2. The 545-nm emission intensity and Eu²⁺ excited state lifetime in EuGa₂S₄ and EuGa₂S₄:Er³⁺ vary exponentially with temperature. The luminescence quenching energies evaluated from the Arrhenius plots of I(10³/T) and τ(10³/T) coincide (0.10 eV) within the error of determination.     

Vapor pressure determination for solid and liquid La<Subscript>2</Subscript>S<Subscript>3</Subscript> using boiling points

A high-temperature technique was developed for vapor pressure determination of solid and liquid γ-La₂S₃ (we called it the boiling point technique). Melting temperatures and total vapor pressures were measured for incongruently vaporizing γ-La₂S₃ at 1853–2210 K and 0.3–3.0 atm pressures. Having compared the slopes of the log p(S₂) versus 1/T plots measured by various techniques, we recommend the equation log p(S₂) [atm] = (6.31 ± 0.15) ? (12720±310)T ^?1 for T = 1021–2013 K as the most reliable for practical use.     

Critical Behavior of La<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.95</Subscript>Fe<Subscript>0.05</Subscript>O<Subscript>3</Subscript> Manganite

The critical behavior of perovskite manganite La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ at the ferromagnetic–paramagnetic has been analyzed. The results show that the sample exhibited the second-order magnetic phase transition. The estimated critical exponents derived from the magnetic data using various such as modified d’Arrott plot Kouvel–Fisher method and critical magnetization M(T _C, H). The critical exponents values for the La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ are close to those expected from the mean field model β = 0.504 ± 0.01 with T _C = 275661 ± 0.447 (from the temperature dependence of the spontaneous magnetization below T _C ), γ = 1.013 ± 0.017 with T _C = 276132 ± 0.452 (from the temperature dependence of the inverse initial susceptibility above T _C ), and δ = 3.0403 ± 0.0003. Moreover, the critical exponents also obey the single scaling equation of M(H, ε) = |ε| ^β f _±(H/|ε| ^β+γ ).     

In-field Conductivity Fluctuations in Ba<Subscript>0.72</Subscript>K<Subscript>0.28</Subscript>Fe<Subscript>2</Subscript>As<Subscript>2</Subscript> Single Crystals

Fluctuations in the conductivity of Ba_0.72K_0.28Fe₂As₂ single crystal are studied systematically by resistance measurements as a function of temperature and magnetic field. A clear Maki?Thompson and Aslamakov?Larkin (MT–AL) two- to three-dimensional (2D–3D) crossover is found on the excess conductivity (Δσ) curves as the temperature approaches the superconducting critical temperature, T _c. 3D fluctuations in superconductivity are realized near T _c that are well fitted to experimental data by the 3D Aslamazov–Larkin theory. The Maki–Thompson model shows a 2D conductivity fluctuation above the 2D-3D temperature transition, T ₀, which depends on magnetic field. Results show that the 2D-3D dimensional crossover moves to lower temperature with increasing magnetic field. The values of the transition temperature and the crossover in the reduced temperature, ln(ε ₀), as functions of magnetic field were used to determine the coherence length and the lifetime, τ _φ , of the fluctuational pairs at the temperature of 35 K. Analysis of the Ba_0.72K_0.28Fe₂As₂ single crystal gives a value of 3.76 × 10^??12 s for the τ _φ in the absence of magnetic field and it decreases to 2.4 × 10^??12 s in magnetic field of 13 T.     

Magnetic properties of CuGa<Subscript>0.94</Subscript>Mn<Subscript>0.06</Subscript>Te<Subscript>2</Subscript>

As part of a search for new spintronic materials, we have studied the magnetic properties of the CuGa_0.94Mn_0.06Te₂ chalcopyrite solid solution in the range 2–400 K in weak and strong magnetic fields. Magnetization isotherms, σ(H), were obtained in magnetic fields of up to 3980 kA/m. σ(T) data were collected in two ways: the sample was cooled in a magnetic field or in zero field. The experimental data were analyzed by fitting to the Langevin function. The data are adequately represented by this relation in the case when the magnetic moment of the clusters is μ_cl = 23.4μ_B and the concentrations of magnetic clusters and noninteracting Mn²⁺ ions are n _cl = 2.4 × 10²⁵ m^?3 and n _pm = 5.7 × 10²⁵ m^?3, respectively. The calculated average cluster size is d _cl = 33 Å, the number of Mn²⁺ ions per cluster is z = 21 atoms per cluster, and the magnetic moment per Mn²⁺ ion in the clusters is μ_Mn = 1.1μ_B. This μ_Mn value is far below the theoretical magnetic moment of the Mn²⁺ ion in the electronic configuration d ⁵(5.9μ_B), suggesting antiferromagnetic exchange interaction.     

High-temperature heat capacity and thermodynamic properties of Tb<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Tb₂Sn₂O₇ has been prepared by solid-state reaction in air at 1473 K over a period of 200 h and its isobaric heat capacity has been studied experimentally in the range 350–1073 K. The C _p(T) data for this compound have no extrema and are well represented by the classic Maier–Kelley equation. The experimental C _p(T) data have been used to evaluate the thermodynamic properties of terbium stannate (pyrochlore structure): enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(Т).     

Investigation of Magnetic,Magnetocaloric, and Critical Properties of La<Subscript>0.5</Subscript>Ba<Subscript>0.5</Subscript>MnO<Subscript>3</Subscript> Manganite

We present an extensive study of the magnetic properties of a novel La_0.5Ba_0.5MnO₃ perovskite material prepared by the hydrothermal method. The explored sample was structurally studied by the x-ray diffraction (XRD) method which confirms the formation of a pure cubic phase of a perovskite structure with Pm3m space group. The magnetic properties were probed by employing temperature M (T) and external magnetic field M (μ_oH) dependence of magnetization measurements. A magnetic phase transition from ferromagnetic to paramagnetic phase occurs at 339 K in this sample. The maximum magnetic entropy change (\(\left | {{\Delta } S}_{M}^{\max } \right |\)) took a value of 1.4 J kg^??1 K^??1 at the applied magnetic field of 4.0 T for the explored sample and has also been found to occur at Curie temperature (T_C). This large entropy change might be instigated from the abrupt reduction of magnetization at T_C. The magnetocaloric effect (MCE) is maximum at T_C as represented by M (μ_oH) isotherms. The relative cooling power (RCP) is 243.2 J kg^??1 at μ_oH =?4.0 T. Moreover, the critical properties near T_C have been probed from magnetic data. The critical exponents δ, β, and γ with values 3.82, 0.42, and 1.2 are close to the values predicted by the 3D Ising model. Additionally, the authenticity of the critical exponents has been confirmed by the scaling equation of state and all data fall on two separate branches, one for T < T_C and the other for T > T_C, signifying that the critical exponents obtained in this work are accurate.     

The H-T and P-T Phase Diagram of the Superconducting Phase in Pd:Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript>

We study the magnetic field vs. temperature (H – T) and pressure vs. temperature (P – T) phase diagrams of the T _c ≈ 5.5 K superconducting phase in Pd _x Bi₂Te₃ (x ≈ 1) using electrical resistivity versus temperature measurements at various applied magnetic fields (H) and magnetic susceptibility versus temperature measurements at various applied magnetic fields (H) and pressure (P). The H – T phase diagram has an initial upward curvature as observed in some unconventional superconductors. The critical field extrapolated to T = 0 K is H _c (0) ≈ 6–10 kOe. The T _c is suppressed approximately linearly with pressure at a rate d T _c /d P ≈ ?0.28 K/GPa.     

Phase relations in the Ag<Subscript>8</Subscript>SnS<Subscript>6</Subscript>-Ag<Subscript>2</Subscript>SnS<Subscript>3</Subscript>-AgBr system and crystal structure of Ag<Subscript>6</Subscript>SnS<Subscript>4</Subscript>Br<Subscript>2</Subscript>

The T-x phase diagram of the Ag-Sn-S-Br system has been studied in the composition region Ag₈SnS₆-Ag₂SnS₃-AgBr, and a compound of composition Ag₆SnS₄Br₂ has been identified. Ag₆SnS₄Br₂ has a new structure, closely related to that of Ag₆GeS₄Br₂: sp. gr. Pnma, a = 6.67050(10), b = 7.82095(9), c = 23.1404(3) Å, Z = 4, R _B = 0.0519, R _wp = 0.0782, χ² = 1.36.     

Synthesis and High-Temperature Heat Capacity of Dy<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates have been prepared by solid-state reactions in several sequential firing steps in the temperature range 1237–1473 K using stoichiometric mixtures of Dy₂O₃ (or Ho₂O₃) and GeO₂. The heat capacity of the synthesized germanates has been determined as a function of temperature by differential scanning calorimetry in the range 350–1000 K. The experimentally determined C _p (T) curves of the dysprosium and holmium germanates have no anomalies and are well represented by the Maier–Kelley equation. The experimental C _p (T) data have been used to evaluate the thermodynamic functions of the Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates: enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(T).     

Crystal Growth and Magneto-transport of Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript> Single Crystals

In this letter, we report on the growth and characterization of bulk Bi ₂Se ₃ single crystals. The studied Bi ₂Se ₃ crystals are grown by the self-flux method through the solid-state reaction from high-temperature (950 °C) melt of constituent elements and slow cooling (2 ℃/h). The resultant crystals are shiny and grown in the [00l] direction, as evidenced from surface XRD. Detailed Reitveld analysis of powder X-ray diffraction (PXRD) of the crystals showed that these are crystallized in the rhombohedral crystal structure with a space group of R3m (D5), and the lattice parameters are a = 4.14 (2), b = 4.14 (2), and c = 28.7010 (7) Å. Temperature versus resistivity (ρ?T) plots revealed metallic conduction down to 2 K, with typical room temperature resistivity (ρ _{300 K}) of around 0.53 m Ω-cm and residual resistivity (ρ _{0 K}) of 0.12 m Ω-cm. Resistivity under magnetic field [ ρ(T)H] measurements exhibited large + ve magneto-resistance right from 2 to 200 K. Isothermal magneto-resistance [ ρH] measurements at 2, 100, and 200 K exhibited magneto-resistance (MR) of up to 240 %, 130 %, and 60 %, respectively, at 14 T. Further, the MR plots are nonsaturating and linear with the field at all temperatures. At 2 K, the MR plots showed clear quantum oscillations at above say 10 T applied field. Also, the Kohler plots, i.e., Δρ/ ρ _oversus B/ ρ, were seen consolidating on one plot. Interestingly, the studied Bi ₂Se ₃ single crystal exhibited the Shubnikov-de Haas (SdH) oscillations at 2 K under different applied magnetic fields ranging from 4 to 14 T.     

The calorimetry and thermodynamic functions of Nd Mg<Stack><Subscript>3</Subscript><Superscript>I</Superscript></Stack>Mn<Subscript>4</Subscript>O<Subscript>12</Subscript> (Me<Superscript>I</Superscript>-Li,Na, K) manganites in the range from 298.15 to 673 K

The ceramic technology is employed for synthesizing manganites of composition Nd Mg ₃ ^I Mg₃Mn₄O₁₂(Me^I-Li, Na, K). The X-ray technique is used to find that the compounds crystallize in tetragonal syngony. The parameters of their crystal lattices are determined. Their heat capacities are experimentally determined in the range from 298.15 to 673 K, which enables one to reveal second-order phase transitions. In view of these transitions, equations describing the C _p ^° ～ f(T) dependence are derived, and the thermodynamic functions C _p ^° (T), H°(T)-H°(298.15), S°(T), and Φ ^xx (T) are calculated.     

Heat Capacity and Thermodynamic Functions of Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript> from 14 to 320 K

The heat capacity of Ga₂Se₃ is measured from 14 to 320 K by adiabatic calorimetry. The smoothed heat capacity data are used to evaluate temperature-dependent thermodynamic functions (entropy, enthalpy increment, and reduced Gibbs energy) of gallium selenide. Under standard conditions, the thermodynamic properties of Ga₂Se₃ are C _p ⁰ (298.15 K) = 120.8 ± 0.2 J/(K mol), S⁰(298.15 K) = 180.4 ± 0.4 J/(K mol), H⁰(298.15 K) - H⁰(0) = 25.32 ± 0.05 kJ/mol, and Φ⁰(298.15 K) = 95.52 ± 0.19 J/(K mol). The Debye characteristic temperature of Ga₂Se₃ evaluated from heat capacity data is 340 ± 10 K.     

Ho<Subscript>2</Subscript>S<Subscript>3</Subscript>-Ga<Subscript>2</Subscript>S<Subscript>3</Subscript> phase diagram

The Ho₂S₃-Ga₂S₃ system has been studied using differential thermal analysis, X-ray diffraction, microstructural analysis, microhardness tests, and density measurements, and its phase diagram has been constructed. The system contains three ternary compounds: Ho₃GaS₆, HoGaS₃, and Ho₆Ga_10/3S₁₄. Their melting behavior has been studied for the first time. The compound Ho₆Ga_10/3S₁₄ melts congruently at 1435 K; Ho₃GaS₆ and HoGaS₃ melt incongruently at 1370 and 1250 K, respectively. The Ho₂S₃-Ga₂S₃ system is a pseudobinary join of the ternary system Ho-Ga-S. At room temperature, the β-Ga₂S₃-based solid solution extends to 1.5 mol % Ho₂S₃; the Ho₂S₃ solubility in γ-Ga₂S₃ is 10 mol %. The compounds HoGaS₃ and Ho₃GaS₆ crystallize in orthorhombic symmetry (Ho₃GaS₆: a = 10.40 Å, b = 13.20 Å, c = 6.44 Å, Z = 4; HoGaS₃: a = 6.8 Å, b = 9.92 Å, a = 3.08 Å, Z = 4). Ho₆Ga_10/3S₁₄ has a hexagonal structure (a = 9.62 Å, c = 6.04 Å).     

Critical Temperature of Smart Meta-superconducting MgB<Subscript>2</Subscript>

Enhancing the critical temperature (T _C ) is important not only to widen the practical applications but also to expand the theories of superconductivity. Inspired by the meta-material structure, we designed a smart meta-superconductor consisting of MgB₂ microparticles and Y₂O₃/Eu³⁺ nanorods. In the local electric field, Y₂O₃/Eu³⁺ nanorods generate an electroluminescence (EL) that can excite MgB₂ particles, thereby improving the T _C by strengthening the electron–phonon interaction. An MgB₂-based superconductor doped with one of four dopants of different EL intensities was prepared by an ex situ process. Results showed that the T _C of MgB₂ doped with 2 wt% Y₂O₃, which is not an EL material, is 33.1 K. However, replacing Y₂O₃ with Y₂O₃/Eu³⁺II, which displays a strong EL intensity, can improve the T _C by 2.8 to 35.9 K, which is even higher than that of pure MgB₂. The significant increment in T _C results from the EL exciting effect. Apart from EL intensity, the micromorphology and degree of dispersion of the dopants also affected the T _C . This smart meta-superconductor provides a new method to increase T _C .     

Synthesis and high-temperature heat capacity of Gd<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Gd₂Sn₂O₇ gadolinium stannate with the pyrochlore structure has been prepared by solid-state reaction and its high-temperature heat capacity has been determined by differential scanning calorimetry in the temperature range 350–1020 K. The C_p(T) data are shown to be well represented by the classic Maier–Kelley equation. The experimental C_p(T) data have been used to evaluate the thermodynamic functions of gadolinium stannate: enthalpy increment H°(T)–H°(339 K), entropy change S°(T)–S°(339 K), and reduced Gibbs energy Ф°(Т).     

High-temperature crystal chemistry of Na<Subscript>6</Subscript>(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>O(MoO<Subscript>4</Subscript>)<Subscript>4</Subscript>

Thermal deformations of Na₆(UO₂)₂O(MoO₄)₄ were studied by high-temperature powder X-ray diffraction. The compound crystallizes in the triclinic system, space group Р\(\bar 1\), a = 7.636(7), b = 8.163(6), c = 8.746(4) Å, α = 72.32(9)°, β = 79.36(4)°, γ = 65.79(5)°, V = 472.74(4) ų. It is stable in the temperature interval 20–700°С. The thermal expansion coefficients (TECs) are α₁₁ = 25.5 × 10^–6, α₂₂ = 7.8 × 10^–6, and α₃₃ = 1.1 × 10^–6 (°C)^–1. The orientation of the TEC pattern relative to the crystallographic axes is a₃₃^Z = 45°, a₃₃^X = 122°, a₂₂^Z = 59°, and a₂₂^X = 66°. The anisotropy of the thermal expansion is due to specific features of the crystal structure of the compound.