共查询到20条相似文献,搜索用时 812 毫秒
1.
2.
针对星载统一S频段(Unified S-band, USB)测控应答机遥控接收高动态问题,提出了一种USB接收设备的设计方法。该方法基于AD9361+现场可编程逻辑门阵列(Field Programmable Gate Array, FPGA)硬件平台,采用并行+串行快速傅里叶变换(Fast Fourier Transform, FFT)实现信号载波频率捕获,载波环路使用2阶锁频环(Frequency Lock Loop, FLL)辅助3阶锁相环(Phase Lock Loop, PLL)环路进行跟踪,遥控副载波环路采用2阶PLL环进行跟踪。对方法的可行性进行了理论推导,使用Matlab进行仿真,结果表明该方法可以满足多普勒动态不小于32 kHz/s下遥控数据解调要求。 相似文献
3.
4.
5.
6.
高动态下GPS信号的捕获和跟踪技术研究 总被引:2,自引:0,他引:2
为检测高动态GPS信号,需要设计码环及载波环的捕获和跟踪数字系统。如何快速捕获信号,并进行精确跟踪,是问题的关键。针对高动态环境下GPS信号的捕获和跟踪问题,分析了高动态环境对GPS信号的影响,提出了FFT码快速捕获算法,以及二阶FLL与三阶PLL混合载波跟踪方案,并对码环和载波环的结构和参数的设计方法进行了说明。仿真结果和分析表明该方案能在高动态环境下实现信号的快速捕获,且能较好地满足接收机动态性能和跟踪精度的要求。 相似文献
7.
郝占炯李春萍秦奋何舟 《无线电工程》2018,(1):68-71
针对火星探测任务X频段深空应答机的高灵敏度接收处理要求,提出了扫频+频域校正、时分复用的方法解决极低信噪比下载波捕获技术,设计了一种数字载波环路方法解决高灵敏度跟踪技术。在信号强度为-155 d Bm条件下,进行了捕获算法和跟踪算法的仿真,并对算法改善前后的仿真结果进行了比较分析。仿真结果表明,采用扫频+频域校正、时分复用的捕获方法能够较好地改善FFT输出信噪比和减少捕获时间;在弱信号条件下,采用FLL+PLL结合的数字载波环路跟踪技术,可以大大缩短跟踪时间。 相似文献
8.
高动态GPS接收机跟踪环路设计与实现 总被引:1,自引:0,他引:1
为了解决高动态环境下GPS信号跟踪问题,讨论了跟踪环路类型和参数的选择策略,给出了一组适合高动态应用的环路参数,分析了基于开环频率估计和2阶FLL(Frequency Lock Loop)辅助3阶PLL(Phase Lock Loop)的高动态环境下快速的捕获转跟踪方法,给出了在由FPGA和DSP组成的硬件平台上的具体实现,利用GPS信号模拟器对所设计的跟踪环路的动态性能进行了验证。测试结果表明所设计的高动态跟踪环路能够承受60g视距动态应力。 相似文献
9.
10.
11.
A simple noise model of a microwave MESFET (MODFET, HEMT, etc.) is described and verified at room and cryogenic temperatures. Closed-form expressions for the minimum noise temperature, the optimum generator impedance, the noise conductance, and the generator-impedance-minimizing noise measure are given in terms of the frequency, the elements of a FET equivalent circuit, and the equivalent temperatures of intrinsic gate resistance and drain conductance to be determined from noise measurements. These equivalent temperatures are demonstrated in the case of a Fujitsu FHR01FH MODFET to be independent of frequency in the frequency range in which 1/f noise is negligible. Thus, the model allows prediction of noise parameters for a broad frequency range from a single frequency noise parameter measurement. The relationships between this approach and other relevant studies are established 相似文献
12.
13.
14.
"杀手锏"、"产业链"问题及创新与发展策略 总被引:17,自引:1,他引:16
随着3G的演进与宽带多媒体业务的发展,用户需求、市场运营模式已发生了本质改变,在这种多方依赖、共赢合作的环境中,必须处理好技术驱动与市场驱动关系,以及“杀手锏”和“产业链”问题,企业才能作出正确的战略决策,在激烈的市场竞争中取得成功。本针对这些情况,并结合中国国情,介绍了应关注的新技术,重点论述“杀手锏”、“产业链”问题及持续发展与不断创新关系的一些策略考虑。 相似文献
15.
16.
17.
18.
19.
21世纪是人类历史的一个蓬勃发展的时代。在信息高速发展的今天,科学技术迅速发展,带动了人类社会的进步,但是同时也带来了人类的生存危机。人类应该正确看待科学技术,使科学造福于人类,而不成为祸害。 相似文献
20.
Vapor-phase etching of (111), (111), (110) GaAs and (111), (111) GaP wafer in H2 + HBr or H2 + PBr3 gas mixtures has been conducted. The results of two cases, with liquid-forming metal (gold) layers or without coatings, are compared. Etching rates as a function of temperature in the range of 600? to 950? C were measured in Arrhenius coordinates. For both materials and for different gas environments, low-, medium- and high-temperature regions are distinguished, the activation energies in the low-temperature region (below about 650?c) being quite different for the two cases. The kinetic results are correlated with morphological changes arising from temperature variations. Some conclusions are made about the mechanisms of chemical vaporization in various temperature regions. The vaporization mechanisms have much in common with those for AII - BVI compounds. 相似文献