Fabrication of plate-on-plate Z-scheme SnS<Subscript>2</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterojunction photocatalysts with enhanced photocatalytic activity

A class of direct plate-on-plate Z-scheme heterojunction SnS₂/Bi₂MoO₆ photocatalysts was synthesized via a two-step hydrothermal method. The materials were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectra, Fourier transform infrared photoluminescence emission spectra, and UV–vis diffuse reflectance spectroscopy. The photocatalytic activity was estimated via the degradation of crystal violet (CV) and ciprofloxacin (CIP). The experimental results indicated that the 5 wt% SnS₂/Bi₂MoO₆ composites exhibited significantly enhanced performance in contrast to pure Bi₂MoO₆ or SnS₂ nanoflakes, and were also superior to the popular TiO₂ (P25). The degradation reaction accorded well with the first-order reaction kinetics equation; the rate constant of CV using a SnS₂ content of 5 wt% photocatalyst was ~?3.6 times that of the Bi₂MoO₆ and 2.4 times that of SnS₂. Furthermore, a SnS₂ content of 5 wt% exhibited a 1.7 times higher photocatalytic activity of CIP than that of pure Bi₂MoO₆, and 1.3 times that of pure SnS₂. Radical trapping experiments and an electron spin resonance technique indicated that h⁺ and ·OH were the dominant active species involved in the degradation process. A plasmonic Z-scheme photocatalytic mechanism was proposed to explain the superior photocatalytic activities and efficient separation of photogenerated electrons and holes.     

Structural,morphological and optical properties of SnS<Subscript>2</Subscript> thin films by nebulized spray pyrolysis technique

The thin films of Nano crystalline tin disulfide (SnS₂) have been prepared by nebulized spray pyrolysis technique (NSP) with different molar concentrations (0.3, 0.4 and 0.5 M). Cleaned glass substrates were used and the substrate temperature was maintained at 300?°C. The films were deposited using tin tetrachloride monohydrate (SnCl₄·H₂O) and thiourea in de-ionized water and Isopropyl alcohol (1:3 ratio). The prepared films structural, morphological and optical properties were studied using X-ray diffraction (XRD), scanning electron microscope (SEM), UV–Vis spectrophotometer. The structure of the films were found to be face centered cubic with preferential orientation along (002) plane. X-ray line profile analysis was used to evaluate the micro structural parameters such as crystallite size, micro strain, dislocation density and texture coefficient. The average crystallite size values are 60 nm. Morphological results of the SnS₂ thin films are small needle shaped particles and the average grain size was 400 nm. The optical studies revealed that the band gap between 2.65 and 2.72 eV and high optical transmittance 98%. EDAX spectrum of tin disulfide result showed some amount of excess tin was present in the sample. This is the method with very low cost of producing tin disulfide (SnS₂) thin films, which is very important for many applications in industry.     

Visible light irradiated photocatalytic and magnetic properties of Fe-doped SnS<Subscript>2</Subscript> nanopowders

Fe-doped SnS₂ (SnS₂:Fe) nanopowders were synthesized by cost effective chemical method and characterized by thermo gravimetric-differential thermal analysis, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and vibrating sample magnetometer techniques. The photocatalytic activity was evaluated for the degradation of congo red dye under visible light irradiation. XRD studies indicate that both the undoped and doped SnS₂ nanopowders exhibit hexagonal crystal structure with a strong (1 0 1) preferential growth. Nanosized grains are evinced from the TEM images. XPS spectra confirmed the presence of Fe in the doped samples. Photodegradation efficiency increased with increase in Fe doping concentration and the SnS₂:Fe nanopowder with 10 wt% Fe doping concentration exhibits a maximum efficiency of 93.94% after 180 min light irradiation. Ferromagnetic ordering of pure SnS₂ improved with Fe doping. The outcome of the results indicated that Fe-doped SnS₂ nanopowders are well suited as diluted magnetic semiconductor and also can be used as an efficient photocatalyst.     

Synthesis of graphene oxide/Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite with enhanced visible-light photocatalytic activity

The nano-scale Ag₃PO₄ was successfully synthesized by the silver ammonia complexing precipitation method at room temperature. And the Graphene oxide (GO)/Ag₃PO₄ nanocomposites with different contents of GO were successfully synthesized using the electrostatic driving method. The as-prepared GO/Ag₃PO₄ nanocomposites were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), confirming that Ag₃PO₄ were highly dispersed to GO sheet. The photocatalytic properties of GO/Ag₃PO₄ were evaluated by the degradation of Methyl Orange (MO) under visible light irradiation and solar irradiation respectively. The results showed that the photocatalytic efficiencies of GO/Ag₃PO₄ nanocomposites had enhanced largely and the kinetics reaction models were followed first-order. Furthermore, 5% GO/Ag₃PO₄ exhibited the highest photocatalytic activity on degradation of MO under visible-light irradiation. The improved photocatalytic performances of the GO/Ag₃PO₄ nanocomposites mainly attributed to the introducing of GO, which benefit for electron transfer and inhibit the recombination of electron–hole pairs, promoting the practical application of Ag₃PO₄ in water purification.     

Effects of sodium oleate on synthesis and photocatalytic activity of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>@RGO

In this study, the effects of sodium oleate on synthesis of Bi₂WO₆/Bi₂O₃ loaded reduced graphene oxide photocatalyst was studied. The as-prepared composites were characterized by X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, UV–visible diffuse reflectance and photoluminescence spectroscopy. The results suggested that addition of sodium oleate not only promoted synthesis of Bi₂O₃, but also enhanced the reduction of GO to graphene. When the amount of sodium oleate was 4 mol (Bi:SO?=?1:1), Bi₂WO₆/Bi₂O₃@RGO to the best visible-light photocatalytic activity can be synthesized by a facile one-step solvothermal process without further reduction reaction. Hence, it indicated that sodium oleate could affect the synthesis of the as-prepared composites and the photocatalytic activity for degradation of RhB. This study did provide not only a facile method to synthesize Bi₂WO₆/Bi₂O₃@RGO, but also a method to reduce graphene oxide to graphene.     

RGO/ZnO纳米棒复合材料的合成及光催化性能

采用水热合成法制备ZnO纳米棒及RGO/ZnO纳米棒复合材料。研究不同含量的RGO对RGO/ZnO纳米棒复合材料光催化活性的影响。采用X射线衍射仪(XRD)、场发射电子显微镜(FESEM)、光电子能谱仪(XPS)及漫反射紫外-可见吸收光谱(UV-Vis)检测手段对RGO/ZnO进行表征。结果显示:RGO与ZnO纳米棒成功复合。加入GO的含量不同,获得的RGO/ZnO样品在可见光区域的吸光度值不同。以甲基橙作为模拟污染物的光催化结果表明,RGO/ZnO复合材料具有高的紫外-可见光光降解效率,加入GO与ZnO的质量比为3%时,样品紫外-可见光光催化性能最佳,120min内甲基橙基本可以完全降解;且在波长大于400nm可见光照射下,RGO/ZnO具有一定的可见光活性,180min内其降解甲基橙效率最大可达26.2%。同时,RGO/ZnO具有较好的光稳定性。     

A facile one step synthesis of SnO<Subscript>2</Subscript>/CuO and CuO/SnO<Subscript>2</Subscript> nanocomposites: photocatalytic application

Here novel photocatalysts, SnO₂/CuO and CuO/SnO₂ nanocomposites were successfully synthesized by chemical method at room temperature. X-ray Diffraction (XRD), transmission electron microscopy (TEM), Fourier transform Infrared (FT-IR), UV–Visible (UV–Vis) and photoluminescence (PL) spectroscopy were utilized for characterization of the nanocomposites. The photocatalytic activity of the nanocomposites was investigated. The hybrid nanocomposites exhibited high photocatalytic activity as evident from the degradation of methylene blue (MB) dye. The result revealed substantial degradation of the MB dye (92 and 69.5% degradation of SnO₂/CuO and CuO/SnO₂, respectively) under visible light illumination with short period of 30 min. Their large conduction band potential difference and the inner electrostatic field formed in the p–n heterojunction provide a strong driving force for the photogenerated electrons to move from Cu₂O to SnO₂ under visible light illumination. The excellent photodegradation of methylene blue suggested that the heterostructured SnO₂/CuO nanocomposite possessed higher charge separation and photodegradation abilities than CuO/SnO₂ nanocomposite under visible light irradiation.     

Growth of Cu2O nanoparticle on reduced graphene sheets with high photocatalytic activity for degradation of Rhodamine B

Cu₂O–reduced graphene oxide (RGO) nanocomposite was synthesized by a simple one-pot solvothermal method. The morphology and properties of Cu₂O/RGO nanocomposites were characterized by scanning electron microscope, Raman spectroscopy, X-ray diffraction, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activities of the as-prepared nanocomposites were investigated by photodegrading Rhodamine B under visible light. Results show that Cu₂O/RGO nanocomposites exhibited a remarkably enhanced photocatalytic efficiency compared with pure Cu₂O nanoparticles and commercial P25. Moreover, we found that the content of graphene oxide introduced into composite material was a crucial factor for its improved photocatalytic performance.     

A Simple Route to Reduced Graphene Oxide‐Draped Nanocomposites with Markedly Enhanced Visible‐Light Photocatalytic Performance

Nanocomposites (denoted RGO/ZnONRA) comprising reduced graphene oxide (RGO) draped over the surface of zinc oxide nanorod array (ZnONRA) were produced via a simple low‐temperature route, dispensing with the need for hydrothermal growth, electrochemical deposition or other complex treatments. The amount of deposited RGO can be readily tuned by controlling the concentration of graphene oxide (GO). Interestingly, the addition of Sn²⁺ not only enables the reduction of GO, but also functions as a bridge that connects the resulting RGO and ZnONRA. Remarkably, the incorporation of RGO improves the visible‐light absorption and reduces the bandgap of ZnO, thereby leading to the markedly improved visible‐light photocatalytic performance. Moreover, RGO/ZnONRA nanocomposites exhibit a superior stability as a result of the surface protection of ZnONRA by RGO. The mechanism on the improved photocatalytic performance based on the cophotosensitizations under the visible‐light irradiation has been proposed. This simple yet effective route to the RGO‐decorated semiconductor nanocomposites renders the better visible‐light utilization, which may offer great potential for use in photocatalytic degradation of organic pollutants, solar cells, and optoelectronic materials and devices.     

Pd nanoparticle loaded TiO<Subscript>2</Subscript> semiconductor for photocatalytic degradation of Paraoxon pesticide under visible-light irradiation

Overuse of the organophosphorus pesticides such as Paraoxon in agriculture industry has raised significant threats to the environment by contamination of soils and groundwaters. Therefore, extensive studies have been carried out to develop an effective method for removing of these poisonous pollutants from contaminated resources. In the current study, Pd nanoparticle loaded TiO₂ nanocomposites with different weight percentages of Pd were prepared via a facile photoreduction method and for the first time, were used for photocatalytic degradation of Paraoxon under visible-light irradiation. The prepared samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy techniques. In these nanocomposites, the presence of Pd nanoparticles enhances the photocatalytic activity of TiO₂ by their surface plasmon resonance effect and also by narrowing the band gap energy of TiO₂. The results of photocatalytic activity measurements indicate that the nanocomposite with 0.8 wt% content of Pd (PT0.8) has the best photocatalytic activity. The result of total organic carbon test shows that Paraoxon was completely mineralized by PT0.8 photocatalyst after 120 min, under visible-light irradiation.     

Facile fabrication of hierarchical BiVO<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> heterostructures for enhanced photocatalytic activities under visible-light irradiation

BiVO₄/TiO₂ nanocomposites were fabricated by a facile wet-chemical process, followed by the synthesis of TiO₂ hierarchical spheres via hydrothermal method. The BiVO₄/TiO₂ nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV–Vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy. The results showed that prepared TiO₂ presented hierarchical spherical morphology self-assembled by nanoparticles and an anatase–brookite mixed crystal phase. The introduction of monoclinic BiVO₄ components retained the hierarchical structures and expanded the light response to around 510 nm. Type II BiVO₄/TiO₂ heterostructured nanocomposites exhibited improved photocatalytic degradation towards methylene blue under visible-light irradiation, especially for the composite photocatalysts with atomic Ti/Bi?=?10, which showed double degradation rate than that of pure BiVO₄. The enhanced photocatalytic mechanism of the heterostructured BiVO₄/TiO₂ nanocomposites was discussed as well.     

Photocatalytic activity of polypyrrole/TiO<Subscript>2</Subscript> nanocomposites under visible and UV light

A series of polypyrrole (PPy)/titanium dioxide (TiO₂) nanocomposites were prepared in different polymerization conditions by ‘in situ’ chemical oxidative polymerization. The nanocomposites were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy spectra (XPS), and UV–Vis diffuse reflectance spectra. The photocatalytic degradation of methyl orange (MO) was chosen as a model reaction to evaluate the photocatalytic activities of TiO₂/PPy catalysts. The results show that a strong interaction exists at the interface between TiO₂ and PPy, the deposition of PPy on TiO₂ nanoparticles can alleviate their agglomeration, PPy/TiO₂ nanocomposites show stronger absorbance than neat TiO₂ under the whole range of visible light. The obtained PPy/TiO₂ nanocomposites exhibit significantly higher photocatalytic activity than the neat TiO₂ on the degradation of MO aqueous solution under visible and UV light illumination. The reasons for improving the photocatalytic activity were also discussed.     

Reduced graphene oxide/CoSe2 nanocomposites: hydrothermal synthesis and their enhanced electrocatalytic activity

Reduced graphene oxide (RGO)/CoSe₂ nanocomposites were synthesized by self-assembly of CoSe₂/DETA (DETA: diethylenetriamine) onto the surface of graphene oxide (GO), followed by subsequent chemical reduction of GO during a hydrothermal process. The as-synthesized products were characterized by powder X-ray diffraction, energy dispersive X-ray spectroscopy, Raman spectra, scanning electron microscopy, and transmission electron microscopy. The morphology of the CoSe₂ on the RGO nanosheets can be well controlled by adjusting the reaction time during the hydrothermal process. The catalytic activities of the RGO/CoSe₂ nanocomposites were investigated for oxygen evolution reaction (OER) in alkaline conditions. It was found that the as-formed RGO/CoSe₂ nanocomposites show higher catalytic activity compared with the unsupported CoSe₂. In addition, the loading amounts and morphologies of CoSe₂ on RGO sheets have a great influence on the catalytic performance of RGO/CoSe₂. Our studies raise promising possibilities for designing effective OER electrocatalysts for energy conversion.     

Improved photodegradation activity of SnO<Subscript>2</Subscript> nanopowder against methyl orange dye through Ag doping

Silver doped tin oxide (SnO₂:Ag) nanopowders were synthesized by a simple soft chemical route with 0, 5, 10 and 15 wt% concentrations of Ag. The structural, morphological, optical, photoluminescence and photocatalytic properties of the synthesized samples were studied and the results obtained are reported in this paper. XRD studies confirm the polycrystalline nature of the synthesized samples. The undoped and doped samples exhibit a strong (1 0 1) preferential growth. Decreased crystallite size is observed with Ag doping. Nanosized grains were observed for the doped samples. Peak related to Sn–O–Sn lattice vibration is observed for both the undoped and doped samples in the FTIR spectra. Peaks related to oxygen vacancies were observed at 362 and 499 nm for all the samples in the PL spectra. Enhanced photocatalytic activity was observed for the doped samples and the SnO₂:Ag nanopowder with 10 wt% Ag doping concentration exhibited maximum photodegradation efficiency against the degradation of methyl orange dye.     

Defects Induced Magnetism in WO<Subscript>3</Subscript> and Reduced Graphene Oxide-WO<Subscript>3</Subscript> Nanocomposites

A series of reduced graphene oxide (rGO)-WO₃ nanocomposites were prepared by hydrothermal method using GO and tungsten complex. The nanocomposites were characterized by powder XRD, Raman spectroscopy, FT-IR spectroscopy, HRTEM, XPS, photoluminescence (PL), and magnetic studies. The structural analysis confirms the hexagonal crystal structure and formation of rGO-WO₃ nanocomposites. HRTEM images show rod-like shape WO₃ distributed on the wrinkle structure of rGO sheets. XPS results confirm the oxidation state and oxygen vacancies present in the samples. PL spectra of the samples show blue emission and indicate the existence of surface defects and oxygen vacancies. The M–H loop of rGO-WO₃ nanocomposites reveal that the co-existence of both ferro and antiferromagnetism at room temperature. The incorporation of rGO sheets notably increase magnetic behavior of composites due to extended C–C bond conducts much stronger coupling between the 5d and 6s orbitals of tungsten and carbon atoms.     

Synthesis and microwave absorption properties of sandwich-type CNTs/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/RGO composite with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> as a bridge

A novel sandwich-type CNTs/Fe₃O₄/RGO composite with Fe₃O₄ as a bridge was successfully prepared through a simple solvent-thermal and ultrasonic method. The structure and morphology of the composite have been characterized by Fourier-transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. This new structure can effectively prevent the agglomeration of GO and the combination of CNTs/Fe₃O₄ and RGO shows a strong reflection loss (R_L) (?50 dB) at 8.7 GHz with absorber thickness of 2.5 mm. Moreover, compared with CNTs/Fe₃O₄/GO composite, it is found that the thermal treating process is beneficial to enhance the microwave absorption properties, which may be attributed to high conductivity of RGO. On this basis, the microwave absorbing mechanism is systematically discussed. All the data show that the CNTs/Fe₃O₄/RGO composite exhibits excellent microwave absorption properties with light density and is expected to have potential applications in microwave absorption.     

Synthesis and characterization of tin disulfide hexagonal nanoflakes via solvothermal decomposition

Tin disulfide (SnS₂) hexagonal flakes with diameters in the range of 50−150 nm are synthesized by using SnCl₂.2H₂O and sodium diethyldithiocabamate as source materials via a solvothermal decomposition route. As-prepared SnS₂ hexagonal nanoflakes are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS) and ultraviolet-visible (UV-vis) spectroscopy. The band gap energy of the SnS₂ nanoflakes is measured to be 2.17 eV, and the conduction band (CB) and valence band (VB) levels of the SnS₂ nanoflakes are calculated to be − 4.34 eV and − 6.55 eV respectively, showing them to be suitable for optional and electronic applications.     

Photocatalytic Reduction of Graphene Oxide–TiO2 Nanocomposites for Improving Resistive‐Switching Memory Behaviors

Graphene oxide (GO)‐based resistive‐switching (RS) memories offer the promise of low‐temperature solution‐processability and high mechanical flexibility, making them ideally suited for future flexible electronic devices. The RS of GO can be recognized as electric‐field‐induced connection/disconnection of nanoscale reduced graphene oxide (RGO) conducting filaments (CFs). Instead of operating an electrical FORMING process, which generally results in high randomness of RGO CFs due to current overshoot, a TiO₂‐assisted photocatalytic reduction method is used to generate RGO‐domains locally through controlling the UV irradiation time and TiO₂ concentration. The elimination of the FORMING process successfully suppresses the RGO overgrowth and improved RS memory characteristics are achieved in graphene oxide–TiO₂ (Go‐TiO₂) nanocomposites, including reduced SET voltage, improved switching variability, and increased switching speed. Furthermore, the room‐temperature process of this method is compatible with flexible plastic substrates and the memory cells exhibit excellent flexibility. Experimental results evidence that the combined advantages of reducing the oxygen‐migration barrier and enhancing the local‐electric‐field with RGO‐manipulation are responsible for the improved RS behaviors. These results offer valuable insight into the role of RGO‐domains in GO memory devices, and also, this mild photoreduction method can be extended to the development of carbon‐based flexible electronics.     

Green gelatin-assisted: Synthesis of Co3O4NPs@rGO nanopowder for highly efficient magnetically separable methylene orange dye degradation

GO and Co(NO₃)₂ were respectively used as rGO and Co₃O₄ precursors for preparing magnetically separable Co₃O₄NPs attached Co₃O₄NPs@rGO nanocomposites by a straightforward sol–gel technique. To characterize the nanocomposite materials, FESEM, EDX, elemental mapping, XRD, FTIR, Raman spectroscopy, UV–vis, VSM and BET were employed. When exposed to UV rays, the nanocomposite showed extraordinary photocatalytic degradation of MO dye. According to the measurements of photocatalytic activity, the highly efficient photocatalytic efficiency of the nanocomposite could be attributed to preventing electron-hole recombination by highly effective electron transfer between rGO and semiconductor NPs. The nanocomposite succeeded in the efficient degradation of MO dye, even after five photocatalytic cycles.     

An efficient visible light photocatalyst prepared from TiO<Subscript>2</Subscript> and polyvinyl chloride

An efficient visible light photocatalyst has been prepared from TiO₂ nanoparticles and a partly conjugated polymer derived from polyvinyl chloride (PVC). It was characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–visible diffuse reflectance spectroscopy (UV–Vis DRS), Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The visible light photocatalytic activity of the as-prepared photocatalyst was evaluated by the photocatalytic degradation of Rhodamine B (RhB) under visible light irradiation. The XPS, FT-IR, and Raman spectra show that the partly conjugated polymer derived from PVC exists on the surface of the TiO₂ nanoparticles. The UV–Vis DRS, XRD, and TEM results reveal that the modification of the partly conjugated polymer can obviously improve the absorbance of the TiO₂ nanoparticles in the range of visible light and hardly affect their size and crystallinity. The visible light photocatalytic activity of the as-prepared TiO₂ nanocomposites is higher than that of commercial TiO₂ (Degussa P25) and comparable with those of visible light photocatalysts reported in the literature. Their visible light photocatalytic stability is also good. The reasons for their excellent visible light photocatalytic activity and the major factors affecting their photocatalytic activity are discussed.