Persistent luminescence of Zn<Subscript>2</Subscript>GeO<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript>/Pr<Superscript>3+</Superscript> phosphors

Zn₂GeO₄, Zn₂GeO₄:Mn²⁺, Zn₂GeO₄:Pr³⁺ and Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors were fabricated by a solid state reaction. The phase and luminescent properties of the fabricated phosphors were investigated. The XRD patterns show that all of the fabricated phosphors have an orthorhombic structure. The fabricated Zn₂GeO₄ shows an emission band in the range of 350–550 nm. The fabricated Zn₂GeO₄:Mn²⁺ and Zn₂GeO₄:Pr³⁺ phosphors show emission bands corresponding to Mn²⁺ and Pr³⁺ ions, respectively. The fabricated Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor shows the emission band results from Mn²⁺ and the codoped Pr³⁺ enhances the emission intensity of Mn²⁺. Moreover, Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphor exhibits longer decay time than that of Zn₂GeO₄:Mn²⁺. The higher intensity and longer lifetime of Mn²⁺ emission are induced by the energy transfer from Pr³⁺ of various vacancies to Mn²⁺ in Zn₂GeO₄:Mn²⁺/Pr³⁺ phosphors.     

Influence of Mn<Superscript>2+</Superscript> on the up-conversion emission performance of Mn<Superscript>2+</Superscript>, Yb<Superscript>3+</Superscript>, Er<Superscript>3+</Superscript>: ZnWO<Subscript>4</Subscript> green phosphors

The Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors are synthesized successfully through the high temperature solid state reaction method. The micro-structure and morphology have been investigated by means of XRD and EDS. The doped concentrations of Mn²⁺, Yb³⁺, Er³⁺ are measured by ICP. The absorption spectra and emission spectra with different doped concentrations of Mn²⁺ are presented to reveal the influence of Mn²⁺ on the green up-conversion performance. Excited with 970 nm LED, the up-conversion emission peak at 547 nm is obtained and the CIE spectra as well as the green light photo are also presented. The results indicate that the Mn²⁺ ions play the role of the luminescence adjustment in the up-conversion process, which can improve the up-conversion green emission intensity effectively. The luminescence adjustment mechanism of Mn²⁺ ions in Mn²⁺, Yb³⁺, Er³⁺: ZnWO₄ green phosphors has been discussed. The crystal parameters of Dq, B and C are calculated to evaluate the energy level split effect.     

Optical properties of Eu<Superscript>3+</Superscript> activated SrLa<Subscript>2</Subscript>O<Subscript>4</Subscript> red-emitting phosphors for WLED applications

The SrLa_2?xO₄:xEu³⁺ phosphors are synthesized through high-temperature solid-state reaction method at 1473 K with various doping concentration. Their phase structures, absorption spectra, and luminescence properties are investigated by X-ray diffraction (XRD), UV–Vis spectrophotometer and photoluminescence spectrometry. The intense absorption of SrLa_2?xO₄:xEu³⁺ phosphors have occurred around 400 nm. The prominent luminescence spectra of the prepared phosphors exhibited bright red emission at 626 nm. The doping concentration 0.12 mol% of Eu³⁺ is shown to be optimal for prominent red emission and chromaticity coordinates are x?=?0.692, y?=?0.3072. Considering the high colour purity and appropriate emission intensity of Eu³⁺ doped SrLa₂O₄ can be used as red phosphors for white light emitting diodes (WLEDs).     

Synthesis,tunable luminescence and thermal stability of Mg<Subscript>2</Subscript>Al<Subscript>4</Subscript>Si<Subscript>5</Subscript>O<Subscript>18</Subscript>:Ce<Superscript>3+</Superscript>/Mn<Superscript>2+</Superscript> phosphors

Ce³⁺/Mn²⁺ singly doped and codoped Mg₂Al₄Si₅O₁₈ phosphors were synthesized by a solid state reaction. The phase, luminescent properties and thermal stability of the synthesized phosphors were investigated. Ce³⁺ and Mn²⁺ singly doped Mg₂Al₄Si₅O₁₈ phosphors show emission bands locating in blue and yellow–red regions, respectively. In Ce³⁺ and Mn²⁺ codoped Mg₂Al₄Si₅O₁₈, tunable luminescence was obtained because of the energy transfer from Ce³⁺ to Mn²⁺. In Mg₂Al₄Si₅O₁₈:Ce³⁺/Mn²⁺ phosphors with a fixed Ce³⁺ concentration, energy transfer efficiency increases with the increasing Mn²⁺ concentration, which is confirmed by the continually decreasing intensity and shortening decay time of Ce³⁺ emission. Moreover, the luminescent properties and thermal stability provide a great significance on the applications in the field of light emitting diodes.     

Single phased Sr<Subscript>3</Subscript>La(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>:Eu<Superscript>2+</Superscript>/Mn<Superscript>2+</Superscript> phosphors: solid state synthesis,tunable luminescence and potential applications in white light LEDs

A series of Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors were synthesized by a solid state reaction. The phase and the optical properties of the synthesized phosphors were investigated. The XRD results indicate that the doped Eu²⁺ and Mn²⁺ ions do not change the phase of Sr₃La(PO₄)₃. The peak wavelengths of Eu²⁺ single doped and Eu²⁺/Mn²⁺ codoped Sr₃La(PO₄)₃ phosphors shift to longer wavelength due to the larger crystal field splitting for Eu²⁺ and Mn²⁺. The increases of crystal field splitting for Eu²⁺ and Mn²⁺ are induced by the substitution of Sr²⁺ by Eu²⁺ and Mn²⁺ in Sr₃La(PO₄)₃ host. Due to energy transfer from Eu²⁺ to Mn²⁺ in Sr₃La(PO₄)₃:Eu²⁺/Mn²⁺ phosphors, tunable luminescence was obtained by changing the concentration of Mn²⁺. And the white light was emitted by Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/4.0 mol%Mn²⁺ and Sr₃La(PO₄)₃:3.0 mol%Eu²⁺/5.0 mol%Mn²⁺ phosphors.     

The luminescent enhancement of LaPO<Subscript>4</Subscript>:Ce<Superscript>3+</Superscript>,Tb<Superscript>3+</Superscript> nano phosphors by radial aggregation

The rare earth nano phosphors can meet the challenging demand for new functional devices but their luminescence is always poor. Here we report on a simple method to prepare uniform LaPO₄:Ce³⁺,Tb³⁺ sphere-like nano aggregates from the precipitated nano phosphor crystallites without using any additive. The spontaneous aggregation is induced and controlled only by the suspension pH conditions. It is found that the 100 nm spherical aggregates can significantly improve the green emissions of the LaPO₄:Ce³⁺,Tb³⁺ nano particles. The intensity of the aggregates can be about 10 times as that of the 80 nm-sized individual ones. This study may provide a useful yet convenient strategy in the improvement and application of nano phosphors.     

Phase conversion and spectral properties of long lasting phosphor Zn<Subscript>3</Subscript> (PO<Subscript>4</Subscript>)<Subscript>2</Subscript>:Mn<Superscript>2+</Superscript>, Ga<Superscript>3+</Superscript>

A red long lasting phosphor Zn₃(PO₄)₂:Mn²⁺,Ga³⁺ (ZPMG) was prepared by ceramic method, and phase conversion and spectral properties were investigated. Results indicated that the phase conversion from α-Zn₃(PO₄)₂, β-Zn₃(PO₄)₂ toγ-Zn₃(PO₄)₂ occurs with different manganese concentration incorporated and sinter process. The structural change induced by the phase transformation results in a remarkable difference in the spectral properties. The possible luminescence mechanism for this red LLP with different forms has been illustrated.     

Roles of doping ions in persistent luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Eu<Superscript>2+</Superscript>, RE<Superscript>3+</Superscript> phosphors

The polycrystalline Eu²⁺ and RE³⁺ co-doped strontium aluminates SrAl₂O₄:Eu²⁺, RE³⁺ were prepared by solid state reactions. The UV-excited photoluminescence, persistent luminescence and thermo-luminescence of the SrAl₂O₄:Eu²⁺, RE³⁺ phosphors with different composition and doping ions were studied and compared. The results showed that the doped Eu²⁺ ion in SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors works as not only the UV-excited luminescent center but also the persistent luminescent center. The doped Dy³⁺ ion can hardly yield any luminescence under UV-excitation, but can form a electron trap with appropriate depth and greatly enhance the persistent luminescence and thermo-luminescence of SrAl₂O₄:Eu²⁺. Different co-doping RE³⁺ ions showed different effects on persistent luminescence. Only the RE³⁺ ion (e.g. Dy³⁺, Nd³⁺), which has a suitable optical electro-negativity, can form the appropriate electron trap and greatly improve the persistent luminescence of SrAl₂O₄:Eu²⁺. Based on above observations, a persistent luminescence mechanism, electron transfer model, was proposed and illustrated.     

Investigations on green-emitting,Mn<Superscript>2+</Superscript>: BaAl<Subscript>12</Subscript>O<Subscript>19</Subscript> phosphors obtained by solution combustion process

Manganese-doped BaAl₁₂O₁₉ green phosphor was prepared using a self-propagating (combustion) synthesis. Powder X-ray diffraction and scanning electron microscopy were used to characterize the as-prepared combustion product. A room temperature photoluminescence study shows an emission line at 513 nm corresponding to a transition from the upper ⁴T₁ → ⁶A₁ ground state of Mn²⁺ ions. The electron paramagnetic resonance (EPR) spectrum exhibits six line hyperfine structure at g = 1.981. From the EPR spectrum, the spin-Hamiltonian parameters have been evaluated. The g value indicates that the site symmetry around Mn²⁺ ions is distorted tetrahedral. The number of spins (N) participating in the resonance for g = 1.981 is measured as a function of temperature. The paramagnetic susceptibility (χ) is calculated from the EPR data at various temperatures. From the plot 1/χ versus T, the Curie constant (C) and Curie paramagnetic temperature (θ_p) have been evaluated and discussed.     

Structure and luminescent properties of Cs<Subscript>2</Subscript>Sr(VO<Subscript>3</Subscript>)<Subscript>4</Subscript>:Mn<Superscript>2+</Superscript>

We have developed a procedure for thermally stimulated synthesis of a cesium strontium metavanadate, Cs₂Sr(VO₃)₄:Mn²⁺ (0.01, 0.50, 1.00, 5.00 at % Mn²⁺), using MnO-containing starting mixtures. The EPR spectrum of the material containing 0.01 at % Mn²⁺ shows a hyperfine structure due to the incorporation of a small amount of manganese into the diamagnetic double metavanadate host. The luminescent and optical properties of Cs₂Sr(VO₃)₄:Mn²⁺ depend on manganese content. In contrast to higher doping levels, doping with 0.01 at % Mn²⁺ increases the integrated emission intensity of the vanadate by 10% and improves its chromaticity characteristics (approaching them to those of white light). We assume that this is due to the reduction in the density of vacancy-type growth defects, such as oxygen vacancies.     

Synthesis and thermoluminescence properties of CdB<Subscript>4</Subscript>O<Subscript>7</Subscript>:Tb<Superscript>3+</Superscript> and CdB<Subscript>4</Subscript>O<Subscript>7</Subscript>:Mn<Superscript>2+</Superscript>

Polycrystalline samples of undoped, terbium-doped (CdB₄O₇:Tb³⁺), and manganese-doped (CdB₄O₇:Mn²⁺) cadmium tetraborate have been prepared by solid-state reactions at 850°C. Using differential scanning calorimetry and X-ray diffraction, we have determined the melting point of CdB₄O₇ (t _m = 976°C) and shown that this compound melts incongruently. The observed monotonic decrease in the orthorhombic cell parameters of the doped materials indicates the formation of substitutional solid solutions (sp. gr. Pbca). The thermoluminescence intensity of the doped materials has been shown to depend on the nature and concentration of the activators and the irradiation time.     

Luminescent properties of Pb<Superscript>2+</Superscript>- and Mn<Superscript>2+</Superscript>-activated CdI<Subscript>2</Subscript> crystals

The luminescent properties of CdI₂, CdI₂:Pb²⁺, CdI₂:Mn²⁺, and CdI₂:Pb²⁺,Mn²⁺) crystals have been studied at temperatures from 85 to 295 K under optical and x-ray excitation. Analysis of new and earlier spectroscopic data suggests that the 560-nm luminescence of CdI₂:Pb²⁺ and CdI₂:(Pb²⁺,Mn²⁺) crystals under excitation on the long-wavelength component of the A absorption band of Pb²⁺ centers is due to Pb²⁺-bound anion excitons. The 640-to 660-nm emission of these crystals is attributable to α centers. The manganese luminescence in the codoped material originates from both intracenter Mn²⁺ excitations and a sensitized process due to energy transfer from the host and Pb²⁺-related centers. The mechanisms of recombination and energy transfer processes in cadmium iodide crystals codoped with Pb²⁺ and Mn²⁺ are discussed.     

The comparison: photoluminescence and afterglow behavior in CaSnO<Subscript>3</Subscript>:Dy<Superscript>3+</Superscript> and Ca<Subscript>2</Subscript>SnO<Subscript>4</Subscript>:Dy<Superscript>3+</Superscript> phosphors

This paper reports the comparison of photoluminescence and afterglow behavior of Dy³⁺ in CaSnO₃ and Ca₂SnO₄ phosphors. The samples containing CaSnO₃ and Ca₂SnO₄ were prepared via solid-state reaction. The properties have been characterized and analyzed by utilizing X-ray diffraction (XRD), photoluminescence spectroscope (PLS), X-ray photoelectron spectroscopy (XPS), afterglow spectroscopy (AS) and thermal luminescence spectroscope (TLS). The emission spectra revealed that CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors showed different photoluminescence. The Ca₂SnO₄:Dy³⁺ phosphor showed a typical ⁴F_9/2 to ⁶H_j energy transition of Dy³⁺ ions, with three significant emissions centering around 482, 572 and 670 nm. However, the CaSnO₃:Dy³⁺ phosphor revealed a broad T₁ → S₀ transitions of Sn²⁺ ions. The XPS demonstrate the existence of Sn²⁺ ions in CaSnO₃ phosphor caused by the doping of Dy³⁺ ions. Both the CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors showed a typical triple-exponential afterglow when the UV source switched off. Thermal simulated luminescence study indicated that the persistent afterglow of CaSnO₃:Dy³⁺ and Ca₂SnO₄:Dy³⁺ phosphors was generated by the suitable electron or hole traps which were resulted from the doping the calcium stannate host with rare-earth ions (Dy³⁺).     

Tunable luminescence properties and energy transfer of single-phase Ca<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>O: Dy<Superscript>3+</Superscript>, Eu<Superscript>2+</Superscript> multi-color phosphors for warm white light

The novel Ca_4?x(PO₄)₂O: xDy³⁺ and Ca_4?x?y(PO₄)₂O: xDy³⁺, yEu²⁺ multi-color phosphors were synthesized by traditional solid-state reaction. The crystal structure, particle morphology, photoluminescence properties and energy transfer process were investigated in detail. The X-ray diffraction (XRD) results demonstrate that the products showed pure monoclinic phase of Ca₄(PO₄)₂O when x < 0.1. The scanning electron microscopy (SEM) indicated that the phosphors were grain-like morphologies with diameters of ~ 3.7–7.0 μm. Under excitation of 345 nm, Dy³⁺-doped Ca₄(PO₄)₂O phosphors showed multi-color emission bands at 410, 481 and 580 nm originated from oxygen vacancies and Dy³⁺. Interestingly, Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors exhibited blue emission band at 481 nm and broad emission band from 530 to 670 nm covering green to red regions. The energy transfer process from Dy³⁺ to Eu²⁺ was observed for the co-doped samples, and the energy transfer efficiency reached to 60% when Eu²⁺ molar concentration was 8%. In particular, warm/cool/day white light with adjustable CCT (2800–6700 K) and high CRI (R_a > 85) can be obtained by changing the Eu²⁺ co-doping contents in Ca₄(PO₄)₂O: Dy³⁺, Eu²⁺ phosphors. The optimized Ca_3.952(PO₄)₂O: 0.04Dy³⁺, 0.008Eu²⁺ phosphor can achieve the typical white light with CCT of 4735 K and CRI of 87.     

Luminescence studies on Eu<Superscript>2+</Superscript> and Tb<Superscript>3+</Superscript> doped Ca<Subscript>2</Subscript>MgSi<Subscript>2</Subscript>O<Subscript>7</Subscript> phosphors

Eu²⁺ and Tb³⁺ doped Ca₂MgSi₂O₇ phosphors were synthesized by conventional solid-state reaction. The phase formation was confirmed by X-ray powder diffraction technique and refined lattice parameters were calculated by rietveld refinement process using Celref v3. The photoluminescence (PL) excitation and emission spectra were investigated. The phosphors exhibited broaden green emitting luminescence peaking at 520 nm when excited at 374 nm source. Morphological studies were carried out using Scanning electron microscopy (SEM) images of the sample with optimum PL emission. The dependence of photoluminescence intensity on co-dopant concentration and the kinetic parameters were also reported. Time resolved fluorescence spectroscopy (TRFS) is used to investigate the decay in luminescence signals with respect to time. The sample proved to be a good long lasting material, which makes it useful in emergency signs, textile printing, textile exit sign boards and electronic instrument dial pads etc.     

EPR and photoluminescence properties of combustion-synthesized ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Cr<Superscript>3+</Superscript> phosphors

An efficient red emitting ZnAl₂O₄:Cr³⁺ powder phosphor material was prepared at furnace temperatures as low as 500 °C by using the combustion method. The prepared powders were analyzed by X-ray diffraction and scanning electron microscopy techniques. The optical properties were studied using photoluminescence technique. The EPR spectra exhibit an intense resonance signal at g = 3.74 which is attributed to Cr³⁺–Cr³⁺ pairs, and the weak resonance signal of at g = 1.97 is attributed to Cr³⁺ single ion transition. The spin population (N) has been evaluated as a function of temperature. The excitation spectrum exhibits two broad bands in the visible region which are characteristic of Cr³⁺ ions in octahedral symmetry and the emission spectrum exhibits zero-phonon line frequencies along with vibronic frequencies. The crystal field parameter (Dq) and Racah parameters (B and C) have been evaluated and discussed.     

Influence of Mg<Superscript>2+</Superscript>/Ga<Superscript>3+</Superscript> doping on luminescence of Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce<Superscript>3+</Superscript> phosphors

Mg²⁺/Ga³⁺ doped Y₃Al₅O₁₂:Ce³⁺ phosphors were synthesized through a solid state reaction. The phase and luminescent of the synthesized phosphors were investigated. For Ga³⁺ codoped Y_2.96Ce_0.04Al_(5?x)Ga_xO₁₂ phosphors, the emission intensity increases with the increase of Ga³⁺ concentration up to Y_2.96Ce_0.04Al_4.80Ga_0.20O₁₂ and then decreases with a further increase of Ga³⁺ concentration, but the emission peak shifts to shorter wavelength continuously in the Ga³⁺ doping concentration range of 0.05–0.25. For Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors, the emission intensity decreases and the emission peak shifts to longer wavelength continuously in the Mg²⁺ doping concentration range of 0.02–0.12. The emission spectra of Y_2.96Ce_0.04Al_(4.8?y)Ga_0.20Mg_yO₁₂ phosphors demonstrate that the codoped Mg²⁺/Ga³⁺ ions not only induce the enhancement of Y_2.96Ce_0.04Al₅O₁₂ emission intensity but also lead to the red shift of Y_2.96Ce_0.04Al₅O₁₂ emission peak. The decay lifetimes decrease in Mg²⁺/Ga³⁺ codoped Y_2.96Ce_0.04Al₅O₁₂ phosphors due to defects formed by substitutions of Y³⁺ by Mg²⁺/Ga³⁺.     

Recombination luminescence of CaI<Subscript>2</Subscript> crystals activated with Eu<Superscript>2+</Superscript>, Gd<Superscript>2+</Superscript>, Tl<Superscript>+</Superscript>, Pb<Superscript>2+</Superscript>, and Mn<Superscript>2+</Superscript>

The spectral characteristics of thermostimulated luminescence, steady-state roentgenoluminescence and photostimulated luminescence (PSL) buildup and decay kinetics, and the effect of IR irradiation on the roentgenoluminescence yield and glow curves of CaI₂:Eu²⁺, CaI₂:Gd²⁺, CaI₂:Tl⁺, CaI₂:Pb²⁺, CaI₂:Mn²⁺, and CaI₂: Pb²⁺, Mn²⁺ crystals grown by the Bridgman-Stockbarger method have been studied in the temperature range 90–295 K. Coupled with earlier data, the present results on the influence of oxygen and hydrogen impurities on the spectral characteristics of CaI₂ indicate that the activation of calcium iodide with Eu²⁺, Gd²⁺, Tl⁺, Pb²⁺, and Mn²⁺ leads to the formation of cation impurity-native defect complexes, which act as carrier traps and are responsible for the thermostimulated luminescence in the range 150–295 K. IR exposure after 90-K x-ray excitation gives rise to flash PSL and influences the thermostimulated luminescence light sum. The nature of the emission and trapping centers involved and the mechanisms of recombination luminescence excitation in the crystals are discussed.     

Tunable luminescence of SrLaMgTaO<Subscript>6</Subscript>:Sm<Superscript>3+</Superscript> phosphors due to energy transfer from TaO<Subscript>6</Subscript> group to Sm<Superscript>3+</Superscript> ion

A series of SrLaMgTaO₆:Sm³⁺ phosphors were synthesized through a solid state reaction. The phase, microstructure and luminescent properties of the synthesized phosphors were investigated through techniques of XRD, SEM and spectrophotometer. The XRD patterns show that the synthesized phosphors have the same phase structure. The SEM images show that the synthesized phosphors are microcrystallines in the range of 1.2–3.4 µm. SrLaMgTaO₆:Sm³⁺ phosphors present emission bands originating from TaO₆ group and Sm³⁺ ions. The critical concentration of Sm³⁺ in SrLaMgTaO₆ is found to be 7 mol%. Due to energy transfer from TaO₆ group to Sm³⁺, tunable luminescence is obtained by changing Sm³⁺ doping concentration.     

Electrical Conductivity of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> Crystals Doped with Ca<Superscript>2+</Superscript>, Pb<Superscript>2+</Superscript>, Sr<Superscript>2+</Superscript>, and Ba<Superscript>2+</Superscript>

Single crystals of Bi₂WO₆ (a layered perovskite-like compound) doped with Ca²⁺, Pb²⁺, Sr²⁺, and Ba²⁺ on the Bi³⁺ site are grown, and their oxygen ionic conductivity is measured along the polar axis. The intrinsic conductivity of the doped crystals differs insignificantly from the conductivity of undoped Bi₂WO₆, indicating that the oxygen ions in the Bi₂O₂ layers contribute little to the oxygen ionic conductivity of the crystals. The sharp change in the activation energy for conduction at 600°C attests to a transition from one conduction mechanism to another in going from low to high temperatures.__________Translated from Neorganicheskie Materialy, Vol. 41, No. 7, 2005, pp. 863–865.Original Russian Text Copyright © 2005 by Kharitonova, Voronkova, Yanovskii.