Alternative fatty food simulants and diffusion kinetics of nylon 12 food packaging.

The migration of laurolactam and cyclic di- and trimer of nylon 12 was assessed using three different films and five food simulants (olive oil, isooctane, 95% ethanol, 50% ethanol, water). Substitute test conditions for migration into olive oil according to European Union Directive EC/97/48 were applied using 95% ethanol and isooctane. Results showed that 95% ethanol overestimated while isooctane underestimated the respective migration into olive oil. Water was the best olive oil substitute, as migration of laurolactam into water and olive oil using the same temperature gave similar results. Additionally, diffusion kinetics of laurolactam were investigated by migration kinetic studies using isooctane and olive oil. Diffusion coefficients determined with isooctane were significantly higher than those found using olive oil. It was proved that isooctane had an interaction and olive oil was inert to the polymer. The diffusion conductance parameter, A(p), for nylon 12 determined using olive oil ranged from 0.3 to 0.6.     

基于磁电感应检测橄榄油酸价及过氧化值的研究

利用单相变压器工作原理将不同储藏期的橄榄油作为次级线圈,在室温下考察激励电压、频率和不同匝数比对橄榄油的电学特性影响,结果发现随样品的酸价和过氧化值提高其终端电压也增高,频率对不同样品的终端电压无显著影响,橄榄油的酸价和过氧化值可采用终端电压进行量化,激励电压为25 V时酸价和终端电压呈现线性关系且决定系数最高为R2=0.998,而激励电压为20 V时过氧化值和终端电压呈现2项式函数关系且决定系数最高为R2=0.991,采用130个不同酸价和过氧化值的样品对回归方程进行校验发现样品的酸价和过氧化值的预测值和实际值的相关系数分别为r=0.948和r=0.974,通过施加交变磁通来考察橄榄油的电学参数可作为一种潜在的快速检测其酸价和过氧化值的方法。     

Polymer additive migration to foods-a direct comparison of experimental data and values calculated from migration models for polypropylene

To reduce the amount of compliance testing for food contact polymers the use of migration modelling is under discussion and being evaluated by an EU Commission funded project (Evaluation of Migration Models No. SMT4-CT98-7513). The work reported in this paper was exclusively funded by industry to provide data for the independent evaluation of a diffusion based model using eight different samples of polypropylene (PP) covering the range of polymers specification and five commonly used plastics additives. One hundred and fifty experimental migration data have been obtained in triplicate and used to evaluate a Fickian-based migration model in the prediction of specific migration of five additives into olive oil. All tests were conducted using olive oil, representing the most severe case for fatty foods, with test conditions of 2h at 121 ° C, 2h at 70 ° C and 10 days at 40 ° C, representing short term exposures at high temperatures and room temperature storage. Predicted migration values were calculated using the Piringer 'Migratest Lite' model by entering the measured initial concentration of additive in the polymers(C_p,0) in to the equations together with known variables such as additive molecular weight, temperature and exposure time. Where necessary the data generated in this study have been used to update the model. The results indicate the Piringer migration model, using the 'exact' calculations of the Migratest Lite program, predicted migration values into olive oil close to, or in excess of, the experimental results for > 97% of the migration values generated in this study. For all measurements, the predicted migration from the Migratest Lite program was greater than 70% of the observed value. This study has identified the possibility that random co-polymers of propylene and ethylene give higher migration than other grades of polypropylenes and could be treated as a separate case. However, further work on more samples of random co-polymers is required to confirm this finding.     

Effect of microwave heating on the migration of dioctyladipate and acetyltributylcitrate plasticizers from food-grade PVC and PVDC/PVC films into olive oil and water

Migration of dioctyladipate (DOA) and acetyltributylcitrate (ATBC) plasticizers from plasticized Polyvinylchloride (PVC) and polyvinylidene chloride (PVDC/PVC (Saran) films into both olive oil and distilled water during microwave heating has been studied. The plasticizer migrating into olive oil and water was determined using an indirect GC method after saponification of the ester-type plasticizer (DOA or ATBC) and subsequent collection of the alcohol component of the ester, namely: 2-ethyl-1-hexanol and 1-butanol, respectively. Migration was dependent on heating time, microwave power setting, the nature of the food simulant and the initial concentration of the plasticizer in the film. Migration of DOA into olive oil reached equilibrium after heating for 10 min at full power (604.6 mg DOA/1). Migration into distilled water was 74.1 mg/1 after 8 min of microwave cooking at full power. The amount of ATBC migrating into olive oil reached equilibrium after heating for 10 min at full power (73.9 mg ATBC/1). Migration into distilled water was 4.1 mg/1 after heating at full power for 8 min. Control samples containing olive oil gave DOA migration values which were significantly higher than the upper limit for global migration (60 mg/1) set by the European Community. It is proposed that PVC should not be used in direct contact with food in the microwave oven, while Saran may be used with caution in microwave heating and reheating applications, avoiding its direct contact with high fat foodstuffs.     

Influence of solvent absorption on the migration of Irganox 1076 from LDPE

The effect of solvent absorption on additive migration was studied by relating the diffusion coefficient ( D ) of Irganox 1076 to the maximum solvent absorption of different solvents in low-density polyethylene (LDPE) film. Solvents tested were ethanol, isopropanol, isooctane, ethylacetate, cyclohexane, tributyrin, tricaprylin and olive oil. Diffusion and partition coefficients were determined by fitting the migration curves, i.e. the concentration of Irganox 1076 in solvent as a function of time, with Fick's diffusion equation. The results for the low molecular weight solvents show that with increasing maximum solvent absorption, D of Irganox 1076 is increasing as well. This trend is not observed for the two triglycerides and olive oil. In spite of absorption, no increase in D was observed. The obtained result is the basis of an extended predictive migration model that, besides migrant and polymer properties, is also based on the maximum solvent absorption in the polymer.     

纳米金属/金属氧化物-聚烯烃食品包装膜中纳米成分迁移的扩散系数估算

为探讨Fick第二定律是否符合聚烯烃食品包装膜中纳米成分向食品模拟物的迁移规律,根据已有实验数据,基于Crank模型进行拟合,估算纳米金属/金属氧化物-聚烯烃食品包装膜中纳米成分的扩散系数,并分析温度、聚烯烃、纳米成分和食品模拟物对扩散系数的影响。结果表明：纳米成分向食品模拟物的迁移符合Fick第二定律。温度升高促进纳米成分的迁移,且温度与纳米成分扩散系数的关系符合Arrhenius公式。不同聚烯烃结构对扩散系数的影响不同;聚丙烯3 种结构中,纳米铜和纳米氧化锌在均聚共聚聚丙烯中的扩散系数最大。不同纳米成分质量分数对其扩散系数的影响不同。纳米成分与食品模拟物、聚烯烃之间的溶解度差异也会影响其向食品模拟物迁移。     

Tetramethylsuccinonitrile in polyvinyl chloride products for food and its release into food-simulating solvents

The content of tetramethylsuccinonitrile (TMSN), the main decomposition product of 2,2'-azobis-isobutyronitrile, in polyvinyl chloride (PVC) products used for food packaging, were examined as well as food-simulating solvents. The TMSN concentration in 17 PVC products ranged from below the detection limit, 0.05 mg/kg, up to 523 mg/kg. The release of TMSN from two PVC products into five kinds of food-simulating solvents at 60 degrees C for 30 min was observed, except for 1 +/- 1 micrograms/kg of TMSN in n-heptane from a PVC bottle containing 523 +/- 30.4 mg/kg of TMSN. The detection limit of TMSN in the food-simulating solvents was 1 micrograms/kg. When pieces of the bottle were stored in olive oil at 40 degrees C for 120 days, 5 +/- 1 micrograms/kg of TMSN was detected in the oil. The release of TMSN from the pieces of the bottle into olive oil between 80 and 140 degrees C depended on the formula ln y = 0.08786x-5.696, r = 0.9927, where y is the concentration (microgram/kg) of TMSN in olive oil, x is the temperature (degrees C), and r is the correlation coefficient.     

Utilization of Fick's second law for the evaluation of diffusion coefficients in food processes controlled by internal diffusion

Several processes in the food industry, such as leaching and drying are usually controlled by internal diffusion. In many cases these processes have been interpreted on the basis of constant diffusion coefficients calculated through a series solution of Fick's second law which converge rapidly for large values of time. This work presents a numerical solution of Fick's second law for various types of concentration dependence of the diffusion coefficient. The results indicate that the above mentioned conventional treatment of experimental data, may not be sufficient to establish whether or not the process is characterized by a constant or variable diffusion coefficient.     

Effect of growing location,malaxation duration and citric acid treatment on the quality of olive oil

BACKGROUND: The total phenolic compounds of olive oil exert antiradical activity at cellular level and can prevent cardiovascular disease, metabolic syndrome and cancer. Increased awareness of its health benefits has increased the consumption of olive oil around the world. An alternative processing technique effective in increasing the amount of oil extracted while maintaining the oil quality is needed to meet the rising global demand for olive oil. RESULTS: Addition of 0.3 g mL^?1 citric acid at 1:1000 (v/w) to olive paste followed by a 30 min malaxation period significantly increased the oil recovery, concentration of total phenolic compounds and antiradical activity by 46.23, 120.27 and 31.48% respectively. While there was no significant effect on the acidity, the peroxide value was significantly reduced by 63.85%. The organoleptic characteristics of the olive oil extracted with citric acid were also comparable to those of the control. CONCLUSION: Addition of 0.3 g mL^?1 citric acid (i.e. 30% w/v) at 1:1000 (v/w) to olive paste followed by a 30 min malaxation period in a Blixer^® 4.0 blender is the most promising extraction technique to improve the oil recovery, concentration of total phenolic compounds and antiradical activity of the extracted olive oil without compromising other quality parameters. © 2012 Society of Chemical Industry     

模拟液的极性对聚丙烯中抗氧化剂迁移的影响

研究了4种抗氧化剂BHA、BHT、Irganox1076、Irgafos168从聚丙烯塑料迁移至6种不同极性的模拟液时,模拟液极性对抗氧化剂迁移规律的影响。结果表明,抗氧化剂与聚丙烯塑料相溶性越差,与模拟液相溶性越好,迁移平衡分配系数越大;同时,模拟液极性越接近聚丙烯时,迁移扩散系数越高,扩散系数受分子量影响越小,反之,则迁移扩散系数受分子量影响较大,扩散系数随分子量的增大而减小;无水乙醇模拟液中,抗氧化剂分子量越大,平衡分配系数受温度影响越大,迁移焓变随分子量增大而增大,而正己烷模拟液中变化正好与之相反。     

Characterization of Polypropylene and Polyester Meltblown Materials used for Food Oil Absorption

Meltblown polypropylene and polyester and paper towels were examined for food oil absorption capacity by weight difference method. Six food oils (coconut, corn, cottonseed, olive, safflower, and sunflower) were used to include a range of fatty acid compositions. Materials were examined by scanning electron microscopy to note physical characteristics that related to absorption. Polypropylene absorbed 33.4% of the oils compared to 25.1% for polyester and 24.2% for paper towels. This was noted by the large pore size and small diameter fibers forming great numbers of pockets which could include oil. Polypropylene material should be considered in microwavable packaging as means to decrease dietary fat.     

Chemical stability of extra-virgin olive oil added with oregano essential oil

Extra virgin olive oil is highly consumed and well known for its nutritional and health benefits. However, it is fatty food highly susceptible to lipid oxidation. The objective of this study was to evaluate the preserving effect of oregano (Origanum vulgare L. spp vulgare called "oregano compacto") essential oil on physical and chemical properties in extra virgin olive oil during storage. Oregano essential oil composition was analyzed by GC-MS. This essential oil was added into extra virgin olive oil at 0.05%. The samples were stored in 3 different conditions: darkness, light exposure, and temperature (60 °C). Chemical indicators of lipid oxidation (peroxide value, p-anisidine value, conjugated dienes, free fatty acidity, and carotenoid and chlorophyll contents) were measured. High content in carvomenthol (22.52%), terpinolene (19.77%), thymol (13.51%), and γ-terpinene (10.30%) were detected in oregano essential oil. Olive oil samples without oregano essential oil stored at 60 °C and exposure at artificial light had the highest peroxide values during storage. Higher p-anisidine and K232 values after day 7 of storage were detected in temperature, darkness, and light exposure treatments. Light treatment was the main factor that degraded chlorophyll causing loss of color. The highest chlorophyll content (3.87 mg/kg) was observed in olive oil with essential oil at the end of storage. In general, olive oil samples added with oregano essential oil had lower peroxide, conjugated dienes, and p-anisidine values and higher chlorophyll and carotenoid contents during storage. Oregano essential oil retards lipid oxidation process in olive oil prolonging its shelf life. PRACTICAL APPLICATION: Oregano essential oil was and is used with the purpose of flavoring and aromatizing food. This essential oil due to its composition has shown antioxidant activity. Synthetic antioxidants such as butylated hydroxytoluene (BHT) and butylated hydroxyanisole (BHA) are thought to be promoters of carcinogenesis. Extra virgin olive oil is widely consumed because of its nutritional benefits and sensory properties which are very important to be preserved in the product. In this study, the oregano essential oil showed remarkable antioxidant activity in olive oil. Therefore, this essential oil could be considered for the industry as natural antioxidant not only to be used in olive oil but also in other fatty food products to substitute synthetic ones.     

Binding of olive oil phenolics to food proteins

In this paper we investigate the interaction of phenolics extracted from olive oil with different food proteins (sodium caseinate, bovine serum albumin, β‐lactoglobulin and gelatin). Binding parameters are estimated using different experimental techniques: gel filtration, HPLC, isothermal titration calorimetry and NMR diffusion measurements. For comparison, the binding properties of gallic acid and tannic acid are also studied. The affinity of olive oil phenolics for the different food proteins is found to be relatively weak (compared with tannic acid). Binding constants are measured for the different phenolics in the extract: tyrosol and hydroxytyrosol do not (or very weakly) bind to the proteins, whereas other phenolics in the extract had binding constants of the order 10²–10⁴ M ^?1. The binding parameters determined have been discussed in relation to the possible effect of proteins on sensory properties (bitterness) of food emulsions containing olive oil. Copyright © 2004 Society of Chemical Industry     

INTERESTERIFICATION REACTIONS CATALYZED BY A LIPASE IMMOBILIZED ON A HYDROPHOBIC SUPPORT

Bacterial lipase from Pseudomonas cepacia immobilized on a hydrophobic support was used to bring about the interesterification reactions of the triglycerides of olive oil with octanoic acid. When the lipase was immobilized on microporous polypropylene powder, the overall reaction rate was approximately seven times faster than that observed when the support was diatomaceous earth or when a comparable amount of free enzyme was present in the reaction mixture. At water contents of less than 1% by weight, an increase in the concentration of water resulted in faster rates of interesterification at the expense of a larger accumulation of intermediate hydrolysis products such as mono- and diglycerides. In the solventless interesterification reactions of octanoic acid and the triglycerides of olive oil, a higher ratio of octanoic acid to olive oil resulted in both faster initial rates of interesterification and eventually, as the mixture approached equilibrium, a higher fraction of octanoic acid residues in the glycerides of olive oil.     

RELEASE OF PROPYL PARABEN FROM A POLYMER COATING INTO WATER AND FOOD SIMULATING SOLVENTS FOR ANTIMICROBIAL PACKAGING APPLICATIONS

The release phenomena of propyl paraben from a polymer coating to water and three food simulating solvents (10% aqueous ethanol, 50% aqueous ethanol, n-heptane) were studied for antimicrobial packaging applications. The effects of food simulating solvent, initial concentration in the coating and temperature on the propyl paraben release were examined. The initial concentration of propyl paraben in the coating ranged from 1.26 × 10⁴ to 10.52 × 10⁴ g/m³ and the temperature from 5.5 to 30C. For water, the release was controlled by Fickian diffusion with constant diffusion coefficient (7±11 × 10^-11 cm²/s at 30C), and independent of the initial concentration. For 10% ethanol, the release followed again the Fickian model with constant diffusion coefficient (30±40 × 10^-11 cm²/s at 30C). For 50% ethanol and n-heptane, the release was instantaneous and not controlled by Fickian diffusion. For the release into water, the activation energy for diffusion from the Arrhenius relationship was around 88 kJ/mole.     

Towards a technological ripening index for olive oil fruits

BACKGROUND: The aim of this work was to study the evolution of sugar and oil contents in Frantoio cultivar olives during ripening in order to propose a technological ripening index for olive oil fruits. Olive fruits were picked at nine different farms once a week from the beginning of September to the beginning of December during three crop seasons. RESULTS: As a result of the biochemical phenomenon of oil formation in olive fruits, sugar concentration during ripening was shown to follow a sigmoidal decrease, which recurred periodically in different microclimates over years. This trend resulted to be the cause of an opposite sigmoidal increase in oil content. Experimental data for sugar and oil contents were also statistically related by significant linear relationships. In addition, it was observed that reaching a minimum environmental temperature of ⩽10 °C resulted in a definite minimum asymptotic value for sugars. CONCLUSION: Sugar concentration can be proposed as an accurate, reproducible index for technological ripening of olive oil fruits by the following prediction function: proper ripening degree of olives corresponds to achievement of a constant minimum value for sugar content and, consequently, a constant maximum value for oil content, associated with reduced risk of fermentation activities of olive paste. Copyright © 2009 Society of Chemical Industry     

Sensory attribute preservation in extra virgin olive oil with addition of oregano essential oil as natural antioxidant

Four commercial varieties of oregano are farmed in Argentina: "Compacto,"Cordobes,"Criollo," y "Mendocino." Oregano essential oil is known for antioxidant properties. The objective of this study was to evaluate changes in the intensities of positive and negative attributes in extra virgin olive oil with addition of essential oil obtained from the 4 Argentinean oregano types. Oregano essential oil was added into olive oil at 0.05% w/w. The samples were stored in darkness and light exposure during 126 d at room temperature. The intensity ratings of fruity, pungency, bitterness, oregano flavor, and rancid flavor were evaluated every 21 d by a trained sensory panel. In general, samples with addition of oregano essential oil in olive oil exhibited higher and lower intensity ratings of positive and negative attributes, respectively, during storage compared with the control samples. The first 2 principal components explained 72.3% of the variability in the olive oil samples. In general, positive attributes of olive oil were highly associated with the addition of oregano essential oil in darkness, whereas rancid flavor was negatively associated with them. Olive oil with oregano "Cordobes" essential oil was oppositely associated with light exposure treatments and negative attribute (rancid flavor) suggesting better performance as natural antioxidant of this essential oil in olive oil. The result of this study showed that the presence of oregano essential oil, specially "Cordobes" type, preserve sensory quality of extra virgin olive oil prolonging the shelf life of this product. Practical Application: Extra virgin olive oil is highly appreciated for its health benefits, taste, and aroma. These properties are an important aspect in this product quality and need to be preserved. The addition of natural additives instead of synthetic ones covers the present trend in food technology. This research showed that the addition of oregano essential oil preserved the intensity ratings of positive attributes in extra virgin olive oil during storage. The essential oil of the oregano variety called "Cordobes" exhibited better protecting effect on sensory properties of olive oil than the other oregano varieties. The addition of oregano essential oil should be considered for the food industry as a natural source of antioxidant additives for preserving sensory properties in extra virgin olive oil and other similar food products.     

橄榄油微乳体系的相行为及影响因素研究

本文以大豆卵磷脂和司盘80(Span80)复配为表面活性剂,乙醇为助表面活性剂,构建橄榄油微乳体系。采用拟三元相图法,考察亲水亲油平衡值(HLB值)、表面活性剂与助表面活性剂的比值(Km值)、盐浓度等因素对微乳体系相行为的影响,并通过电导率、负染透射电镜等方法研究微乳体系的结构,以优化体系配方、考察微乳液的形成规律。结果表明:大豆卵磷脂与Span80以质量比为3:1复配为混合表面活性剂,并与助表面活性剂无水乙醇按质量比(Km值)为2:1混合,所形成的大豆卵磷脂/Span80/乙醇/橄榄油/水微乳区域面积最大;甘油或少量盐离子的加入,可以在一定程度上增大微乳单相区的面积,但当盐浓度(C_NaCl)大于4 mol/L时,微乳区域面积明显减小;在大豆卵磷脂/Span80/橄榄油/乙醇/甘油/水微乳体系中,当水相(w_水/w_甘油=1:1)含量大于22 wt%时,体系逐渐由W/O型转变为双连续型结构。当水相含量超过30 wt%,体系则发生相分离。此研究为橄榄油微乳液的制备及应用提供理论和技术支持。     

Determination of the mass transport properties of chemical additives in polypropylene material/simulated food system

The mass transport process (migration) of five additives from three different types of polypropylene (PP) films into selected food simulants was studied. The migration tests were carried out at different time-temperature conditions, and the concentration of additives in polymer matrix and food simulants were analysed by high-performance liquid chromatography (HPLC). With all data, the mass transport properties for migration kinetics (partition and diffusion coefficients) were determined. Results showed that the partition coefficient was affected significantly by the temperature and simulants’ properties, whereas little affected by the types of PP film and molecular weight of substance. The polarity, structure and shape of substances can also have an influence in their partition between the polymer matrix and food simulants. Additionally, comparison results between the experimental diffusion coefficients and the calculated values by Piringer model suggested that the current migration model with the default modelling parameters for PP does not describe realistically the diffusion coefficients of additives. The calculated diffusion coefficients were greater than the experimental values, as a consequence, the migration of chemical additives will be overestimated. For more realistic migration calculations, more accurate modelling parameters in Piringer model should be established and the effect of food on migration should be high interest in future work.     

Migration study of carvacrol as a natural antioxidant in high-density polyethylene for active packaging

The migration behaviour of low molecular weight compounds from food packaging materials is one of the key issues in assessing the possibility of use in such applications. The aim of this work was to study the migration of carvacrol (1% and 2% w/w) when added to high-density polyethylene. All materials were exposed to the food simulants olive oil and distilled water separately at 40°C and 25°C. Three significant variables influencing the migration process were considered: incubation temperatures, the initial concentration of antioxidant, and the type of simulant (oil and aqueous). The amount of carvacrol migrating to olive oil was significantly higher than in water because of the higher solubility of this antioxidant in oil. Experimental results agreed reasonably well with those obtained by the application of a simple model derived from Fick's Second Law. Carvacrol could therefore be used in active packaging formulations as its release from the polymer matrix can be controlled.