Synthesis and spectroelectrochemistry of dithieno(3,2‐b:2′,3′‐d)pyrrole derivatives

New π‐conjugated polymers containing dithieno(3,2‐b:2′,3′‐d)pyrrole (DTP) were successfully synthesized via electropolymerization. The effect of structural differences on the electrochemical and optoelectronic properties of the 4‐[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl]aniline (DTP–aryl–NH₂), 10‐[4H‐dithiyeno(3,2‐b:2′,3′‐d)pirol‐4‐il]dekan‐1‐amine (DTP–alkyl–NH₂), and 1,10‐bis[4H‐dithieno(3,2‐b:2′,3′‐d)pyrrol‐4‐yl] decane (DTP–alkyl–DTP) were investigated. The corresponding polymers were characterized by cyclic voltammetry, NMR (¹H‐NMR and ¹³C‐NMR), and ultraviolet–visible spectroscopy. Changes in the electronic nature of the functional groups led to variations in the electrochemical properties of the π‐conjugated systems. The electroactive polymer films revealed redox couples and exhibited electrochromic behavior. The replacement of the DTP–alkyl–DTP unit with DTP–aryl–NH₂ and DTP–alkyl–NH₂ resulted in a lower oxidation potential. Both the poly(10‐(4H‐Dithiyeno[3,2‐b:2′,3′‐d]pirol‐4‐il)dekan‐1‐amin) (poly(DTP–alkyl–NH₂)) and poly(1,10‐bis(4H‐dithieno[3,2‐b:2′,3′‐d]pyrrol‐4‐yl) decane) (poly(DTP–alkyl–DTP)) films showed multicolor electrochromism and also fast switching times (<1 s) in the visible and near infrared regions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40701.     

Dithieno[2,3‐d:2′,3′‐d′]naphtho[2,1‐b:3,4‐b′]dithiophene based medium bandgap conjugated polymers for photovoltaic applications

Three novel medium band gap (MBG) conjugated polymers (CPs) (named as P1, P2, and P3, respectively) were developed by copolymerizing 2,7‐dibromo‐10,11‐di(2‐hexyldecyloxy)dithieno[2,3‐d:2′,3′‐d′]naphtho[2,1‐b:3,4‐b′]dithiophene (NDT‐Br) with three different units: 2,5‐bis(tributylstannyl)thiophene, 2,5‐bis(trimethylstannyl)thieno[3,2‐b]thiophene and trans?1,2‐bis(tributylstannyl)ethene, respectively. The thermal, optical, and electrochemical properties of the polymers were investigated. All of the polymers have good thermal stability and medium band gap (～ 1.9 eV). Prototype bulk heterojunction photovoltaic cells based on the blend P1/P2/P3 and [6, 6] phenyl‐C61 butyric acid methyl ester (PC₆₁BM) were assembled and the photovoltaic properties were assessed. Power conversion efficiencies (PCEs) of 1.61% ～ 2.43% have been obtained under 100 mW cm^?2 illumination (AM1.5). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43288.     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999     

Preparation and properties of organo‐soluble polyimides based on 4,4′‐diamino‐3,3‐dimethyldiphenylmethane and conventional dianhydrides

4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999     

Design and synthesis of thieno[3,4‐c]pyrrole‐4,6‐dione based conjugated copolymers for organic solar cells

A new series of conjugated copolymers (PBDT‐TPD , PBDT ‐Th‐TPD , PBDT‐TT‐TPD ) containing donor–acceptor (D ? A) structure electron‐rich benzo[1,2‐b :4,5‐b ′]dithiophene (BDT ) units with branched alkyl thiophene side chains and electron‐deficient 5‐(2‐octyl)‐4H ‐thieno[3,4‐c ]pyrrole‐4,6(5H )‐dione (TPD) units was designed and synthesized. To tune the optical and electrochemical properties of the copolymers, the conjugation length of the copolymers was extended by introducing π‐conjugated spacers such as thiophene and thieno[3,2‐b ]thiophene units. It was observed that PBDT‐TPD showed broader absorption spectra in the longer wavelength region and the absorption maximum was red‐shifted compared to that of PBDT‐Th‐TPD, PBDT‐TT‐TPD. Stokes shifts were calculated to be 52 nm for PBDT‐TPD, 153 nm for PBDT‐Th‐TPD and 146 nm for PBDT‐TT‐TPD. Further, PBDT‐TPD exhibited a deeper highest occupied molecular orbital energy level of ?5.53 eV as calculated by cyclic voltammetry. Bulk heterojunction solar cells fabricated using PBDT‐TPD as donor material exhibited a power conversion efficiency of 1.92%. © 2017 Society of Chemical Industry     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Synthesis of pyrazolo[4′,3′:5,6]pyrazino[2,3-c]pyrazoles and pyrazolo[4′,3′:5,6]pyrazino[2,3-d]pyrimidines and their application to polyester fibres

4-Nitroso-1-phenyl-3-methyl-5-aminopyrazole ( 1 ) was condensed with ethylcyanoacetate ( 2 ), malononitrile ( 4a ) and 2-cyanomethylbenzimidazole ( 4b ) to yield 6-hydroxy-5-cyano, 6-amino-5-cyano and 6-amino-5-(benzimidazol-2-yl)-3-methylpyrazolo [3,4-b]pyrazines 3, 5a and 5b , respectively. 5-Cyano-6-chloro derivative 6 obtained from 3 was converted to 3-aminopyrazolo[4′,3′:5,6]pyrazino[2,3-c]pyrazoles 8a and 8b by the treatment with hydrazin hydrate ( 7a ) and phenylhydrazine ( 7b ), respectively. Compound 5a was treated with formamide ( 9a ), urea ( 9b ) and thiourea ( 9c ) to give 4-aminopyrazolo[4′,3′:5,6]pyrazino[2′3′-d]pyrimidines 10a–10c. With refluxing acetic anhydride compounds 8a, 8b and 10a gave corresponding acetamido derivatives 8c, 8d and 10d. Compound 5a was treated with ethylorthoformate ( 11 ), acetic anhydride ( 12 ) or benzoylchloride ( 13 ) to give fused benzimidazopyrazolo[4′,3′:5,6]pyrazino[2′,3′-d]pyrimidines, viz., benzimidazol[1,2-c]pyrazolo[4,3-g]pteridines ( 14a–14c ). Some of the compounds 8, 10 and 14 were applied to polyester as disperse dyes and their fastness properties were studied.     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Asymmetric [4+2] Annulations of Isatins with But‐3‐yn‐2‐one

The catalytic asymmetric [4+2] annulations of isatins with but‐3‐yn‐2‐one catalyzed by the Cinchona alkaloids‐derived oragnocatalyst (DHQD)₂PHAL have been developed in the presence of 3.0 equivalents of D ‐diethyl tartrate in the mixed solvent (diphenyl ether/diethyl ether=1/1) or a slightly modified one, affording the corresponding substituted spiro[indoline‐3,2′‐pyran]‐2,4′(3′H)‐diones in good to excellent yields with high enantioselectivities under mild conditions.

     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Gold(I)‐Catalyzed Cascade for Synthesis of Pyrrolo[1,2‐a:2′,1′‐c]‐/Pyrido[2,1‐c]pyrrolo[1,2‐a]quinoxalinones

An efficient and convenient method was developed for the one‐pot construction of the complex polycyclic heterocycles pyrrolo[1,2‐a:2′,1′‐c]‐/pyrido[2,1‐c]pyrrolo[1,2‐a]quinoxalinones from two simple starting materials via a gold(I)‐catalyzed domino reaction. This strategy presents an atom economical and environmentally friendly transformation, in which two new C N bonds and one new C C bond are formed in a one‐pot reaction process.     

Phosphine‐Catalyzed Asymmetric [4+2] Annulation of Vinyl Ketones with Oxindole‐Derived α,β‐Unsaturated Imines: Enantioselective Syntheses of 2′,3′‐Dihydro‐1′H‐spiro[indoline‐3,4′‐pyridin]‐2‐ones

A novel asymmetric [4+2] annulation of vinyl ketones with oxindole‐derived α,β‐unsaturated imines has been developed in the presence of a multifunctional thiourea‐phosphine catalyst derived from a natural amino acid, providing the first phosphine‐catalyzed enantioselective synthesis of 2′,3′‐dihydro‐1′H‐spiro[indoline‐3,4′‐pyridin]‐2‐ones in good yields with excellent stereoselectivities under mild conditions.

     

Molecular design and density functional theory investigation of novel low‐band‐gap benzobisthiadiazole‐based systems: from monomer to polymer

The electronic structure and properties of benzobisthiadiazole‐based alternating donor–acceptor conjugated oligomers and their periodic copolymers of donor and acceptor units with ratios of 1:1 and 2:1 were investigated systematically using the density functional theory method. The donors include thiophene, thieno[3,2‐b]thiophene and pyrrole. The ratio of donor to acceptor units (D:A ratio) plays a very important role in the geometric and electronic properties. The intramolecular charge transfer increases and the bond length alternation decreases with an increase in the D:A ratio for these oligomers and polymers. Moreover, an increase in D:A ratio can greatly reduce the band gap and effective mass of holes and electrons for these alternating donor‐acceptor conjugated copolymers. The unusually large intramolecular charge transfer caused by intramolecular hydrogen bonds reveals that pyrrole is not only a strong electron donor but also a potential hydrogen bond donor. The theoretical results suggest those copolymers possessing a D:A ratio of 2:1 are better candidates for conducting materials compared to those with a D:A ratio of 1:1. The almost zero band gap, large bandwidth and small effective mass of holes and electrons of poly(4,8‐bis(thieno[3,2‐b]thiophene‐2‐yl)benzo[1,2‐c:4,5‐c′]bis[1,2,5]thiadiazole) indicate that it is a very good candidate for an electrically conductive material. Copyright © 2010 Society of Chemical Industry     

Diastereo‐ and Enantioselective Synthesis of Chiral Pyrrolidine‐Fused Spirooxindoles via Organocatalytic [3+2] 1,3‐Dipolar Cycloaddition of Azomethine Ylides with Maleimides

In the presence of a Cinchona alkaloid‐based squaramide organocatalyst, the [3+2] cycloaddition of isatin‐derived azomethine ylides with maleimides proceeded readily, thus delivering the desired pyrrolidine‐fused spirooxindoles in 61–89% yields with >20:1 dr and 12 to >99 % ee. The absolute configuration of 5‐chloro‐1,5′‐dimethyl‐3′‐phenyl‐3′,3a′‐dihydro‐2′H‐spiro[indoline‐3,1′‐pyrrolo[3,4‐c]pyrrole]‐2,4′,6′(5′H,6a′H)‐trione was unambiguously determined by means of X‐ray single crystal structure analysis. The reaction mechanism was hypothesized to account for the enantioselective formation of 5‐chloro‐1,5′‐dimethyl‐3′‐phenyl‐3′,3a′‐dihydro‐2′H‐spiro[indoline‐3,1′‐pyrrolo[3,4‐c]pyrrole]‐2,4′,6′(5′H,6a′H)‐trione.

     

Polymerization of 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( 1 ) was reacted with 1,8‐naphthalic anhydride ( 2 ) in a mixture of acetic acid and pyridine (3 : 2) under refluxing temperature and gave 4‐(4′‐N‐1,8‐naphthalimidophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( NIPTD ) ( 3 ) in high yield and purity. The compound NIPTD was reacted with excess n‐propylisocyanate in N,N‐dimethylacetamide solution and gave 1‐(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐triazolidine‐3,5‐dione ( 4 ) and 1,2‐bis(n‐propylamidocarbonyl)‐4‐[4′‐(1,8‐naphthalimidophenyl)]‐1,2,4‐ triazolidine‐3,5‐dione ( 5 ) as model compounds. Solution polycondensation reactions of monomer 3 with hexamethylene diisocyanate ( HMDI ), isophorone diisocyanate ( IPDI ), and tolylene‐2,4‐diisocyanate ( TDI ) were performed under microwave irradiation and conventional solution polymerization techniques in different solvents and in the presence of different catalysts, which led to the formation of novel aliphatic‐aromatic polyureas. The polycondensation proceeded rapidly, compared with conventional solution polycondensation, and was almost completed within 8 min. These novel polyureas have inherent viscosities in a range of 0.06–0.20 dL g^?1 in conc. H₂SO₄ or DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2861–2869, 2003     

Atom transfer radical polymerization of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene

Atom transfer radical polymerization (ATRP) of (R)‐2‐methacryloyloxy‐2′‐methoxy‐1,1′‐binaphthalene ((R)‐MAMBN) mediated by different amine ligands, copper(I) chloride and ethyl 2‐bromopropionate in different solvents, and reverse ATRP of (R)‐MAMBN were studied. It was shown that optically active polymers were obtained, with poor control of the molecular weights, and low polydispersities. Specific rotation of the polymers increased with increasing molecular weights. By comparison with (R)‐MAMBN, poly((R)‐MAMBN)s exhibits higher specific rotation and a positive Cotton effect. Copyright © 2003 Society of Chemical Industry     

Intramolecular Photochemical Cross‐Coupling Reactions of 3‐Acyl‐2‐haloindoles and 2‐Chloropyrrole‐3‐carbaldehydes with Substituted Benzenes

Highly efficient syntheses of indolo[2,1‐a]isoquinolines, indolo[2,1‐a][2]benzazepines, pyrrolo[2,1‐a]isoquinolines and pyrrolo[1,2‐a]benzazepines in excellent yields have been achieved by the intramolecular photochemical cross‐coupling reactions of 3‐acyl‐2‐halo‐N‐(ω‐arylalkyl)indoles and 2‐chloro‐N‐(ω‐arylalkyl)pyrrole‐3‐carbaldehydes in acetone. A new heterocyclic ring system – pyrrolo[1,2‐d][1,4]benzoxazepine – has also been constructed for the first time in this work by the photocyclization of 2‐chloro‐N‐(2‐phenoxyethyl)pyrrole‐3‐carbaldehyde.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry