Dispersion of multiwalled carbon nanotubes in polyacrylonitrile‐co‐starch copolymer matrix for enhancement of electrical,thermal, and gas barrier properties

Nanomaterials gained great importance on account of their wide range of applications in many areas. Carbon nanotubes (CNTs) exhibit exceptional electrical, thermal, gas barrier, and tensile properties and can therefore be used for the development of a new generation of composite materials. Functionalized multiwalled carbon nanotubes (MWCNTs) reinforced Polyacrylonitrile‐co‐starch nanocomposites were prepared by in situ polymerization technique. The structural property of PAN‐co‐starch/MWCNT nanocomposites was studied by X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy. The conductivity, tensile strength, and thermal properties of nanocomposites were measured as a function of MWCNT concentrations. The thermal stability, conductivity, and tensile strength of PAN‐co‐starch/MWCNT nanocomposites were improved with increasing concentration of MWCNTs. Oxygen barrier property of PAN‐co‐starch/MWCNT nanocomposites was calculated and it was found that, the property was reduced substantially with increase of MWCNTs proportion. The synthesized PAN‐co‐starch/MWCNT nanocomposites may used for electrostatically dissipative materials, aerospace or sporting goods, and electronic materials. © 2013 Society of Plastics Engineers     

Synthesis and characterization of poly(HEMA‐co‐MMA)‐g‐POSS nanocomposites by combination of reversible addition fragmentation chain transfer polymerization and click chemistry

New hybrid poly(hydroxyethyl methacrylate‐co‐methyl methacrylate)‐g‐polyhedral oligosilsesquioxane [poly(HEMA‐co‐MMA)‐g‐POSS] nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and click chemistry using a grafting to protocol. Initially, the random copolymer poly(HEMA‐co‐MMA) was prepared by RAFT polymerization of HEMA and MMA. Alkynyl side groups were introduced onto the polymeric backbones by esterification reaction between 4‐pentynoic acid and the hydroxyl groups on poly(HEMA‐co‐MMA). Azide‐substituted POSS (POSS? N₃) was prepared by the reaction of chloropropyl‐heptaisobutyl‐substituted POSS with NaN₃. The click reaction of poly(HEMA‐co‐MMA)‐alkyne and POSS? N₃ using CuBr/PMDEATA as a catalyst afforded poly(HEMA‐co‐MMA)‐g‐POSS. The structure of the organic/inorganic hybrid material was investigated by Fourier transformed infrared, ¹H‐NMR, and ²⁹Si‐NMR. The elemental mapping analysis of the hybrid using X‐ray photoelectron spectroscopy and EDX also suggest the formation of poly(HEMA‐co‐MMA)‐anchored POSS nanocomposites. The XRD spectrum of the nanocomposites gives evidence that the incorporation of POSS moiety leads to a hybrid physical structure. The morphological feature of the hybrid nanocomposites as captured by field emission scanning electron microscopy and transmission electron microscopic analyses indicate that a thick layer of polymer brushes was immobilized on the POSS cubic nanostructures. The gel permeation chromatography analysis of poly(HEMA‐co‐MMA) and poly(HEMA‐co‐MMA)‐g‐POSS further suggests the preparation of nanocomposites by the combination of RAFT and click chemistry. The thermogravimetric analysis revealed that the thermal property of the poly(HEMA‐co‐MMA) copolymer was significantly improved by the inclusion of POSS in the copolymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Nanometer‐thick patterned conductive films prepared through the self‐synthesis of polythiophene derivatives

The development of flexible electronics requires the patterning of conductive and active semiconductor films. Although inorganic materials such as indium tin oxide and metal nanoparticles have high conductivity and transparency, their poor interfacial adhesion with organic layers, lack of flexibility, high weight and high capital costs are drawbacks. In contrast, organic conducting polymers have great potential for use in commercial flexible electronic applications because of their low production costs, environmental stability and acceptable conductivities. A UV‐curable photoresist containing hydroxyl groups was prepared from a mixture of a photoinitiator, epoxy‐acrylate resin, hydroxyethyl methacrylate and tripropylene glycol diacrylate. Patterns having line widths/spaces of 100/100 µm and 10/5 µm were fabricated on a poly(ethylene terephthalate) (PET) substrate using lithography techniques. (3‐Methyl‐3,4‐dihydro‐2H‐thieno[3,4‐b]dioxepin‐3‐yl)methanol (ProDOT‐OH) was self‐synthesized through urethane linkages onto the surface of the patterned photoresist on the PET film, which was then dipped into a solution of another monomer, 3‐thienylethoxybutanesulfonate (TEBS), and initiator and polymerized in situ to form conductive poly(ProDOT‐OH‐co‐TEBS) films covering the surface of the patterned resist. The optimal conductivity of the poly(ProDOT‐OH‐co‐TEBS) films was ca 90 S cm^?1 with an optical transparency of ca 70%. A new bottom‐up technique has been developed for the preparation of patterned organic transparent conductive films: self‐synthesis of the monomer using urethane‐forming reactions and subsequent in situ polymerization. The conductivity of the films can be controlled by the polymerization reaction time and the resolution of the pattern. These conductive patterned films might be applicable to the manufacture of industrial touch panels or chemical/biological sensors. Copyright © 2009 Society of Chemical Industry     

Preparation of poly(divinylbenzene‐co‐N‐isopropylacrylamide) microspheres and their hydrogen‐bonding assembly behavior for raspberry‐like core‐corona polymer composite

Narrowdisperse poly(divinylbenzene‐co‐N‐isopropylacrylamide) (poly(DVB‐co‐NIPAM)) functional microspheres with the diameter in the range of 630 nm and 2.58 μm were prepared by distillation–precipitation polymerization in neat acetonitrile in the absence of any stabilizer. The effect of N‐isopropylacrylamide (NIPAM) ratio in the comonomer feed on the morphology of the resultant polymer particles was investigated in detail with divinylbenzene (DVB) as crosslinker and 2,2′‐azobisisobutyronitrile (AIBN) as initiator. The monodisperse poly(DVB‐co‐NIPAM) microspheres with NIPAM fraction of 20 wt % were selected for the preparation of raspberry‐like core‐corona polymer composite by the hydrogen‐bonding self‐assembly heterocoagulation with poly(ethyleneglycol dimethacrylate‐co‐acrylic acid) [poly(EGDMA‐co‐AA)] nanospheres. Both of the functional poly(DVB‐co‐NIPAM) microspheres and the core‐corona particles were characterized with scanning electron microscopy (SEM), Fourier transform infrared spectra (FTIR), and elemental analysis (EA). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1350–1357, 2007     

Graphene Oxide Hybrid Supramolecular Hydrogels with Self‐Healable,Bioadhesive and Stimuli‐Responsive Properties and Drug Delivery Application

Self‐healable hydrogels are promising soft materials with great potential in biomedical applications due to their autonomous self‐repairing capability. Although many attempts are made to develop new hydrogels with good self‐healing performance, to integrate this characteristic along with other responsive multifunctions into one hydrogel still remains difficult. Here, a self‐healable hybrid supramolecular hydrogel (HSH) with tunable bioadhesive and stimuli‐responsive properties is reported. The strategy is imparting graphene oxide (GO) nanosheets and quadruple hydrogen bonding ureido‐pyrimidinone (UPy) moieties into a thermoresponsive poly(N‐isopropylacrylamide) (PNIPAM) polymer matrix. The obtained GO–HSH hydrogel shows rapid self‐healing behavior and good adhesion to various surfaces from synthetic materials to biological tissue. In addition, doxorubicin hydrochloride (DOX) release profiles reveal the dual thermo‐ and pH‐responsiveness of the GO–HSH hydrogel. The DOX‐loaded hydrogel can further directly adhere to titanium substrate, and the released DOX from this thin hydrogel coating remains biologically active and has high capability to kill tumor cells.     

An m‐phenylenediamine‐based benzoxazine with favorable processability and its high‐performance thermoset

A novel aromatic diamine‐based benzoxazine (P‐mPDA) is successfully synthesized from m‐phenylenediamine (m‐PDA), 2‐hydroxybenzaldehyde, and formaldehyde. The polymerization behavior of P‐mPDA and the properties of its thermoset are studied. The results indicate that P‐mPDA owns favorable processability including low polymerization temperature, low liquefying temperature, and wide processing window. Even lower polymerization temperature (polymerization onset temperature as low as 80 °C) can be achieved by the promotion of catalysts. The ring‐opening polymerization of P‐mPDA first generates polybenzoxazine with N, O‐acetal‐type structure and arylamine Mannich‐type structure, following which rearrangement from N, O‐acetal‐type structure to phenolic Mannich‐type structure proceeds at elevated temperature. Furthermore, the polymerized P‐mPDA shows outstanding performance such as extremely high glass transition temperature (T_g) of 280 °C, high char yield above 53% at 800 °C under nitrogen and excellent mechanical property. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43368.     

Electrospinning core‐shell nanofibers for interfacial toughening and self‐healing of carbon‐fiber/epoxy composites

This article reports a novel hybrid multiscale carbon‐fiber/epoxy composite reinforced with self‐healing core‐shell nanofibers at interfaces. The ultrathin self‐healing fibers were fabricated by means of coelectrospinning, in which liquid dicyclopentadiene (DCPD) as the healing agent was enwrapped into polyacrylonitrile (PAN) to form core‐shell DCPD/PAN nanofibers. These core‐shell nanofibers were incorporated at interfaces of neighboring carbon‐fiber fabrics prior to resin infusion and formed into ultrathin self‐healing interlayers after resin infusion and curing. The core‐shell DCPD/PAN fibers are expected to function to self‐repair the interfacial damages in composite laminates, e.g., delamination. Wet layup, followed by vacuum‐assisted resin transfer molding (VARTM) technique, was used to process the proof‐of‐concept hybrid multiscale self‐healing composite. Three‐point bending test was utilized to evaluate the self‐healing effect of the core‐shell nanofibers on the flexural stiffness of the composite laminate after predamage failure. Experimental results indicate that the flexural stiffness of such novel self‐healing composite after predamage failure can be completely recovered by the self‐healing nanofiber interlayers. Scanning electron microscope (SEM) was utilized for fractographical analysis of the failed samples. SEM micrographs clearly evidenced the release of healing agent at laminate interfaces and the toughening and self‐healing mechanisms of the core‐shell nanofibers. This study expects a family of novel high‐strength, lightweight structural polymer composites with self‐healing function for potential use in aerospace and aeronautical structures, sports utilities, etc. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Microfluidic assembly of uniform fluorescent microbeads from quantum‐dot‐loaded fluorine‐containing microemulsion

We report a facile strategy for fabricating fluorescent quantum dot (QD)‐loaded microbeads by means of microfluidic technology. First, a functional fluorine‐containing microemulsion was synthesized with poly[(2‐(N‐ethylperfluorobutanesulfonamido)ethyl acrylate)‐co‐(methyl methacrylate)‐co‐(butyl acrylate)] (poly(FBMA‐co‐MMA‐co‐BA)) as the core and glycidyl methacrylate (GMA) as the shell via differential microemulsion polymerization. Then, CdTe QDs capped with N‐acetyl‐l ‐cysteine (NAC) were assembled into the poly(FBMA‐co‐MMA‐co‐BA‐co‐GMA) microemulsion particles through the reaction of the epoxy group on the shell of the microemulsion and the carboxyl group of the NAC ligand capped on the QDs. Finally, fluorescent microbeads were fabricated using the CdTe QD‐loaded fluorine‐containing microemulsion as the discontinuous phase and methylsilicone oil as the continuous phase by means of a simple microfluidic device. By changing flow rate of methylsilicone oil and hybrid microemulsion system, fluorescent microbeads with adjustable sizes ranging from 290 to 420 µm were achieved. The morphology and fluorescent properties of the microbeads were thoroughly investigated using optical microscopy and fluorescence microscopy. Results showed that the fluorescent microbeads exhibited uniform size distribution and excellent fluorescence performance. © 2014 Society of Chemical Industry     

Preparation of quadruple responsive polymeric micelles combining temperature‐, pH‐, redox‐, and UV‐responsive behaviors and its application in controlled release system

A novel series of quadruple responsive copolymers, poly(ethylene glycol)‐ss‐[poly(dimethylaminoethyl methacrylate)‐co‐poly(2‐nitrobenzyl methacrylate)] [PEG‐ss‐(PDMAEMA‐co‐PNBM)], were synthesized via atom transfer radical polymerization mediated by home‐made PEG‐based macro‐initiator labeled with disulfides. The obtained copolymers could self‐assemble in aqueous solution forming micelles with the disulfide bridge linking the hydrophilic coronas (PEG) and the hydrophobic cores (PDMAEMA‐co‐PNBM). Investigation on the resulted micelles indicated that the micelles could respond to various stimuli, that is, temperature, pH, the presence of dithiothreitol (DTT), and UV irradiation. Moreover, the responsive behavior of the micelles depends on the type of stimuli, that is, temperature change causes size change of the micelles, while UV irradiation leads to dissolution of the self‐assembled structures. Such stimulus‐dependent responsive behavior could be applied in smart materials that deal with multi‐tasks or in the construction of complex logic gate. The potential application of the multi‐responsive micelles in cargo release system was also evaluated using Nile Red (NR) as model molecule. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46675.     

Chemo‐enzymatic synthesis of poly(2,2,2‐trichloroethyl 10‐hydroxydecanate)‐block‐polystyrene combining enzymatic self‐condensation polymerization and ATRP

Enzymatic polymerization in a non‐natural environment is of interest as an environmentally friendly methodology as an alternative to the use of conventional chemical organometallic catalysts. Chemo‐enzymatic synthesis of the AB‐type diblock copolymer poly(2,2,2‐trichloroethyl 10‐hydroxydecanate)‐block‐polystyrene (PHD‐b‐PSt) was carried out by combining enzymatic self‐condensation polymerization (eSCP) and atom‐transfer radical polymerization (ATRP). Biocatalyst Novozyme 435 was successful in catalyzing the eSCP of a novel ω‐hydroxyester, i.e. 2,2,2‐trichloroethyl 10‐hydroxydecanate. The resulting ? CCl₃‐terminated PHD initiated the ATRP of styrene, a ‘living’/controlled radical polymerization. The analysis of the hydrolysate from the copolymer proved the presence of a block copolymer structure. In addition, the well‐defined diblock copolymer PHD‐b‐PSt self‐assembled into nanoscale micelles in aqueous solution. The chemo‐enzymatic synthesis of diblock copolymer PHD‐b‐PSt was achieved by the combination of eSCP and ATRP. The structures and composition of the block copolymer were characterized by means of NMR, infrared and gel permeation chromatography measurements. Differential scanning calorimetry analysis showed that a microphase‐separation structure was formed in the copolymer, which was caused by the crystallization of the PHD segments. As investigated with atomic force microscopy and dynamic light scattering, these micelles had a mean diameter and a spherical shape. To our knowledge, this is the first example of a chemo‐enzymatic synthesis based on eSCP and ATRP. Copyright © 2007 Society of Chemical Industry     

Effect of 3‐aminopropyltriethoxysilane on properties of poly(butyl acrylate‐co‐maleic anhydride)/silica hybrid materials

The transparent poly(butyl acrylate‐co‐maleic anhydride)/silica [P(BA‐co‐MAn)/SiO₂] has been successfully prepared from butyl acrylate‐maleic anhydride copolymer P(BA‐co‐MAn) and tetraethoxysilane (TEOS) in the presence of 3‐aminopropyltriethoxysilane (APTES) by an in situ sol–gel process. Triethoxysilyl group can be readily incorporated into P(BA‐co‐MAn) as pendant side chains by the aminolysis of maleic anhydride unit of copolymer with APTES, and then organic polymer/silica hybrid materials with covalent bonds between two phases can be formed via the hydrolytic polycondensation of triethoxysilyl group‐functionalized polymer with TEOS. It was found that the amount of APTES could dramatically affect the gel time of sol–gel system, the sol fraction of resultant hybrid materials, and the thermal properties of hybrid materials obtained. The decomposition temperature of hybrid materials and the final residual weight of thermogravimetry of hybrid both increase with the increasing of APTES. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed that the morphology of hybrid materials prepared in the presence of APTES was a co‐continual phase structure. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 419–424, 1999     

Effect of organomodified clay on the reaction kinetics,properties and thermal degradation of nanocomposites based on poly(styrene‐co‐ethyl methacrylate)

In this research, synthesis of novel nanocomposites based on a poly(styrene‐co‐ethyl methacrylate) copolymer matrix was investigated with different types and amounts of organomodified montmorillonite (MMT) clays. The in situ polymerization technique was selected with dispersion of the MMT nanoparticles into the comonomer mixture and subsequent bulk radical polymerization. Reaction kinetics was measured gravimetrically and it was found that the existence of rigid phenyl rings in the organomodifier may result in a hindered reaction rate especially at high clay loadings. Structural characteristics of the nanocomposites formed were verified with XRD and Fourier transform infrared analysis and mainly intercalated/partially exfoliated structures were verified; their glass transition temperature was measured with DSC, and their molecular weight distribution and average molecular weights were measured with gel permeation chromatography. The latter was also used to measure the variation of the copolymer average molecular weight with conversion. Slightly higher average molecular weight and T_g values for the copolymer in the nanocomposites were measured, compared with neat copolymer. The thermal stability of the nanocomposites was measured with TGA and found to be significantly improved. One‐step degradation revealed the existence of macromolecular chains without defective structures. Finally, pyrolysis of the nanocomposite copolymers resulted in the production of both comonomers in high amounts, followed by some dimers or trimers. © 2013 Society of Chemical Industry     

In situ development of bio‐based polyurethane‐blend‐epoxy hybrid materials and their nanocomposites with modified graphene oxide via non‐isocyanate route

We developed a series of sunflower oil‐based non‐isocyanate polyurethane (NIPU)‐blend‐epoxy hybrid materials (HNIPUs) and their nanocomposites with amine‐functionalized graphene oxide (AF‐GO). Firstly, carbonated sunflower oil (CSFO) containing five‐membered cyclocarbonate groups was synthesized by the reaction of epoxidized sunflower oil with carbon dioxide (CO₂) at a pressure of 50 bar and temperature of 110 °C. Then, a series of HNIPUs were synthesized using a mixture of CSFO and a commercially available epoxy resin in various amounts (10, 20 and 30 wt% with respect to CSFO) using isophorone diamine as the curing agent. The HNIPU with 30 wt% epoxy showed the best mechanical properties. Finally, nanocomposites of 30 wt% HNIPU‐based composition were prepared with various amounts of AF‐GO (0.3, 0.6 and 1.0 wt%) and were characterized using Fourier transform infrared and ¹H NMR spectroscopies, X‐ray diffraction and scanning electron microscopy. These results emphasize the potentiality of this environmentally friendly approach for preparing renewable HNIPU and nanocomposite materials of high performances. © 2018 Society of Chemical Industry     

Exfoliated poly (styrene‐co‐methylstyrene) grafted‐polyaniline/layered double hydroxide nanocomposite synthesized by solvent blending method

Well defined poly (styrene‐co‐methylstyrene) grafted polyaniline/organo‐modified MgAl layered double hydroxide (LDH) was produced through solution intercalation method. After LDH nanoparticles were modified by the anion exchange reaction of MgAl (Cl) LDH with sodium dodecyl benzene sulfonate, Poly (styrene‐co‐methylstyrene) copolymers were synthesized by “living” free radical polymerization and then brominated with N‐bromosuccinimide. Afterwards, 1,4‐phenylenediamine was linked to brominated copolymers and prepared functionalized copolymer with amine. Poly (St‐co‐MSt)‐g‐PANI, has been synthesized by adding solution of ammonium persulfate and p‐toluenesufonic acid in DMSO solvent. Finally, Poly (styrene‐co‐methylstyrene) grafted‐Polyaniline/LDH nanocomposites were prepared by solution intercalation method. Characterization of these well‐defined nanocomposites included FT‐IR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimeter, transmission electron microscopy, and X‐ray diffraction. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization

The influence of granulometry and organic treatment of a Brazilian montmorillonite (MMT) clay on the synthesis and properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites was studied. Hybrid latexes of poly(styrene‐co‐butyl acrylate)/MMT were synthesized via miniemulsion polymerization using either sodium or organically modified MMT. Five clay granulometries ranging from clay particles smaller than 75 μm to colloidal size were selected. The size of the clay particles was evaluated by specific surface area measurements (BET). Cetyl trimethyl ammonium chloride was used as an organic modifier to enhance the clay compatibility with the monomer phase before polymerization and to improve the clay distribution and dispersion within the polymeric matrix after polymerization. The sodium and organically modified natural clays as well as the composites were characterized by X‐ray diffraction analysis. The latexes were characterized by dynamic light scattering. The mechanical, thermal, and rheological properties of the composites obtained were characterized by dynamical‐mechanical analysis, thermogravimetry, and small amplitude oscillatory shear tests, respectively. The results showed that smaller the size of the organically modified MMT, the higher the degree of exfoliation of nanoplatelets. Hybrid latexes in presence of Na‐MMT resulted in materials with intercalated structures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Rheological properties of poly(acrylonitrile‐co‐methyl acrylate)/clay nanocomposites prepared via emulsion polymerization

Poly(acrylonitrile‐co‐methyl acrylate)/clay nanocomposites were prepared by free radical polymerization in emulsion using 2‐acrylamido‐2‐methyl‐1‐propanesulphonic acid (AMPS) as a compatibilizer. The resultant nanocomposites were of partially exfoliated morphology despite the variations in clay content among the nanocomposites, as confirmed by transmission electron microscopy and small‐angle X‐ray scattering analysis. Rheological studies of these materials were carried out using parallel plate geometry. The storage modulus increased monotonically with increasing clay content throughout the frequency range studied. However, the neat copolymer, poly(acrylonitrile‐co‐methyl acrylate) and its nanocomposites, exhibited long relaxation behavior as the storage modulus (G′) was greater than the loss modulus (G″) throughout the angular frequency range studied. The complex viscosity of the nanocomposites increased with increasing clay content and they exhibited shear‐thinning behavior. Despite the enhanced rheological properties observed, the copolymer and its nanocomposites underwent structural changes during oscillatory measurements due to cyclization reactions. POLYM. COMPOS., 32:59–66, 2011. © 2010 Society of Plastics Engineers     

Self‐assembly of pH‐responsive acrylate latex particles at emulsion droplets interface

The self‐assembly of pH‐responsive poly (methyl methacrylate‐co‐acrylic acid) latex particles at emulsion droplet interfaces was achieved. Raising pH increases the hydrophilicity of the latex particles in situ and the latex particle acts as an efficient particulate emulsifier self‐assembling at emulsion droplet interface at around pH 10–11 but exhibits no emulsifier activity at higher pH. This effect can be reversibly induced simply by varying the aqueous phase pH and thus the latex emulsifier can be reassembled. The effect factors, including the aqueous phase pH, the surface carboxyl content, ζ‐Potential of the latex particles and oil phase solvent have been investigated. Using monomer as oil phase, the latex particles could stabilize emulsion droplets during polymerization and cage‐like polymer microspheres with hollow core/porous shell structure were obtained after polymerization. The mechanism of the latex particles self‐assembly was discussed. The morphologies of emulsion and microspheres were characterized by optical microscopy, scanning electron microscopy, and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation and characterization of acrylonitrile‐ethyl methacrylate copolymers and the effect of LiClO4 salt on electrical properties of copolymer films

Copolymers of poly(acrylonitrile‐co‐ethyl methacrylate), P(AN‐EMA), with three different EMA content and parent homopolymers were synthesized by emulsion polymerization. The chemical composition of copolymers were identified by FTIR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The thermal properties of copolymers were modified by changing the EMA content in copolymer compositions. Various amounts of LiClO₄ salt loaded (PAN‐co‐PEMA) copolymer films were prepared by solution casting. The dielectric properties of these films at different temperatures and frequencies were investigated. It was found that the dielectric constant and ac‐conductivity of copolymer films were strongly influenced by the salt amounts and EMA content in copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012