新型两亲性嵌段共聚物导向合成有序大孔径介孔材料的研究进展

自从1992年首次报道介孔氧化硅分子筛M41S系列以来, 人们采用各种商业化表面活性剂为模板, 合成了多种骨架组成、丰富的有序介观结构、不同孔径尺寸的介孔材料, 并将其应用在能源、环境、催化等诸多领域。然而, 由于常规商业化模板剂的分子量大小有限, 合成的介孔材料具有较小的孔径(< 8.0 nm), 从而极大地限制了其面对大尺寸客体分子的相关应用。此外, 利用常规模板剂难以合成出具有晶化墙壁的介孔金属氧化物材料。近年来, 大分子量两亲性嵌段共聚物相继被报道用来合成新型介孔材料, 本文将综述基于这种嵌段共聚物为模板剂合成各种具有大孔径和晶化墙壁介孔材料的研究进展。     

Ordered Mesoporous Carbons

Ordered mesoporous carbons have recently been synthesized using ordered mesoporous silica templates. The synthesis procedure involves infiltration of the pores of the template with appropriate carbon precursor, its carbonization, and subsequent template removal. The template needs to exhibit three‐dimensional pore structure in order to be suitable for the ordered mesoporous carbon synthesis, otherwise disordered microporous carbon is formed. MCM‐48, SBA‐1, and SBA‐15 silicas were successfully used to synthesize carbons with cubic or hexagonal frameworks, narrow mesopore size distributions, high nitrogen Brunauer–Emmett–Teller (BET) specific surface areas (up to 1800 m² g^–1), and large pore volumes. Ordered mesoporous carbons are promising in many applications, including adsorption of large molecules, chromatography, and manufacturing of electrochemical double‐layer capacitors.     

高性能超级电容器有序中孔炭材料的研制

采用微湿含浸法制备了一系列具有不同比表面积和孔径分布的超级电容器有序中孔炭材料。采用液氮吸附脱附等温线、小角XRD以及TEM表征了有序中孔炭的孔结构,在1MEt4NBF4|PC电解液中测试了其电化学性能。结果表明,所制得的有序中孔炭的BET比表面积随糠醇加入量的增加先增加后减小,糠醇加入量少制得具有CMK-5结构的有序中孔炭,加入量多制得的CMK-3结构。电化学性能测试结果表明,在1mA·cm-2的充放电电流密度下各有序中孔炭材料比电容的大小顺序与其BET比表面积的大小顺序基本一致,具有CMK-3结构的有序中孔炭的倍率性能最好,并且也好于无序中孔炭的。     

球壳状纳米介孔腔内药物释放特性的分子动力学研究

有序纳米介孔材料的有序性、大的比表面积、孔道均匀等特性使其在药物装载、吸附、释放等方面得到广泛的应用。近年来研究者对介孔材料在药物控释方面的研究主要是通过材料制备、表征以及吸附药物后介孔材料的性能测试等几方面实现的。大多数报道都是采用实验的方法进行研究,关于模拟计算方面的研究很少,力场的选择更是模拟计算的一项挑战。依据介孔材料的独特结构构建了球壳状纳米介孔腔内药物分子释放模型,通过分子动力学的方法计算分析了药物分子的释放特性,重点考察了药物分子大小、溶液环境、介孔腔结构特征对其释放特性的影响。     

Recent Progress in the Synthesis of Porous Carbon Materials

In this review, the progress made in the last ten years concerning the synthesis of porous carbon materials is summarized. Porous carbon materials with various pore sizes and pore structures have been synthesized using several different routes. Microporous activated carbons have been synthesized through the activation process. Ordered microporous carbon materials have been synthesized using zeolites as templates. Mesoporous carbons with a disordered pore structure have been synthesized using various methods, including catalytic activation using metal species, carbonization of polymer/polymer blends, carbonization of organic aerogels, and template synthesis using silica nanoparticles. Ordered mesoporous carbons with various pore structures have been synthesized using mesoporous silica materials such as MCM‐48, HMS, SBA‐15, MCF, and MSU‐X as templates. Ordered mesoporous carbons with graphitic pore walls have been synthesized using soft‐carbon sources that can be converted to highly ordered graphite at high temperature. Hierarchically ordered mesoporous carbon materials have been synthesized using various designed silica templates. Some of these mesoporous carbon materials have successfully been used as adsorbents for bulky pollutants, as electrodes for supercapacitors and fuel cells, and as hosts for enzyme immobilization. Ordered macroporous carbon materials have been synthesized using colloidal crystals as templates. One‐dimensional carbon nanostructured materials have been fabricated using anodic aluminum oxide (AAO) as a template.     

水热法合成介孔氧化硅材料的结构及表面特性

以十六烷基三甲基溴化氨 (CTMABr)为模板剂 ,利用碱性水热法制备了介孔氧化硅材料 ,并采用小角度XRD、HRTEM、BET和FT IR等测试手段研究了其孔的结构、表面N2 吸附特性和孔径分布情况。结果表明 :碱性水热法制得的介孔氧化硅材料具有规则的六方结构 ,介孔的最可几半径为 1 9mm ,比表面积为 5 42 8m2 / g ,孔容为 0 4 5 6cm3/ g。     

Pore structure control of mesoporous carbon as supercapacitor material

The pore structure and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated in this work. The pore size distribution of the mesoporous carbons changes from unimodal to bimodal and the mean pore size increases with the increase of silica sol/glucose ratio. The specific capacitance of the mesoporous carbons also increases with the increase of silica sol/glucose ratio. A novel technique named as template–chemical activation method, combining both template and chemical activation methods, is proposed, which can effectively control the pore structure, improving the electrochemical properties of the mesoporous carbon with improved porosity especially microporosity.     

Synthesis,characterization and magnetic performance of Co-incorporated ordered mesoporous carbons

Co-incorporated ordered mesoporous carbon (Co-OMC) with magnetic frameworks has been synthesized via a one-pot self-assembly strategy. The effects of cobalt loading on carbon matrix, adsorption properties and magnetic properties of the resultant mesostructured cobalt/carbon composites were investigated by nitrogen sorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and magnetometer measurements. The results show that the mesoporous composites with a high cobalt content (such as 18.0 wt%) possess an ordered and uniform mesoporous structure (5.3 nm), high surface areas (up to 687 m²/g) and high pore volumes (up to 0.54 cm³/g). Cobalt nanoparticles of size 4–9 nm are confined inside the mesopores or walls of the mesoporous carbon. These materials exhibit typical ferromagnetic characteristics. The saturation magnetization strength can be easily adjusted by changing the content of cobalt. The carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMC also.     

Synthesis of polyaniline-coated ordered mesoporous carbon and its enhanced electrochemical properties

Pore surface of ordered mesoporous carbon (OMC) was coated with a thin layer of polyaniline by chemical polymerization of aniline monomers. Structure characterizations, such as N₂ adsorption analysis, small angle X-ray diffraction and transmission electron microscopy, demonstrate that polyaniline is well distributed on the pore surface of OMC. As evidenced by constant current charge–discharge test, specific capacitance of polyaniline-coated ordered mesoporous carbon (PCOMC) reaches as high as 602.5 F/g, which is much higher than that of OMC, due to the incorporation of polyaniline onto the pore surface of OMC. However, the capacitive behavior deteriorated somewhat due to the narrowed pore size and extra faradiac reactions caused by the incorporation of polyaniline.     

Assembly of ligand-stripped nanocrystals into precisely controlled mesoporous architectures

The properties of mesoporous materials hinge on control of their composition, pore dimensions, wall thickness, and the size and shape of the crystallite building units. We create ordered mesoporous materials in which all of these parameters are independently controlled. Different sizes (from 4.5 to 8 nm) and shapes (spheres and rods) of ligand-stripped nanocrystals are assembled using the same structure-directing block copolymers, which contain a tethering domain designed to adsorb to their naked surfaces. Material compositions range from metal oxides (Sn-doped In(2)O(3) or ITO, CeO(2), TiO(2)) to metal fluorides (Yb,Er-doped NaYF(4)) and metals (FePt). The incorporation of new types of nanocrystals into mesoporous architectures can lead to enhanced performance. For example, TiO(2) nanorod-based materials withstand >1000 electrochemical cycles without significant degradation.     

Host–guest chemistry of mesoporous silicas: precise design of location,density and orientation of molecular guests in mesopores

Abstract

Mesoporous solids, which were prepared from inorganic-surfactant mesostructured materials, have been investigated due to their very large surface area and high porosity, pore size uniformity and variation, periodic pore arrangement and possible pore surface modification. Morphosyntheses from macroscopic morphologies such as bulk monolith and films, to nanoscopic ones, nanoparticles and their stable suspension, make mesoporous materials more attractive for applications and detailed characterization. This class of materials has been studied for such applications as adsorbents and catalysts, and later on, for optical, electronic, environmental and bio-related ones. This review summarizes the studies on the chemistry of mesoporous silica and functional guest species (host–guest chemistry) to highlight the present status and future applications of the host–guest hybrids.     

One-pot synthesis of ordered mesoporous carbon–silica nanocomposites templated by mixed amphiphilic block copolymers

Mixed amphiphilic block copolymers of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO–PPO–PEO) and polydimethylsiloxane-poly(ethylene oxide) (PDMS–PEO) have been successfully used as co-templates to prepare ordered mesoporous polymer–silica and carbon–silica nanocomposites by using phenolic resol polymer as a carbon precursor via the strategy of evaporation-induced self-assembly (EISA). The ordered mesoporous materials of 2-D hexagonal (p6m) mesostructures have been achieved, as confirmed by small-angle X-ray scattering (SAXS), transmission electron microscopy (TEM), and nitrogen-sorption measurements. Experiments show that using PDMS–PEO as co-template can enlarge the pore sizes and reduce the framework shrinkage of the materials without evident effect on the specific surface areas. Ordered mesoporous carbons can then be obtained with large pore sizes of 6.7 nm, pore volumes of 0.52 cm³/g, and high surface areas of 578 m²/g. The mixed micelles formed between the hydrophobic PDMS groups and the PPO chains of the F127 molecules should be responsible for the variation of the pore sizes of the resulting mesoporous materials. Through the study of characteristics of mesoporous carbon and mesoporous silica derived from mother carbon–silica nanocomposites, we think mesoporous carbon–silica nanocomposites with the silica-coating mesostructure can be formed after the pyrolysis of the PDMS–PEO diblock copolymer during surfactant removal process. Such method can be thought as the combination of surfactant removal and silica incorporation into one-step. This simple one-pot route provides a pathway for large-scale convenient synthesis of ordered mesostructured nanocomposite materials.     

Facile synthesis of ordered mesoporous silica with high γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> loading via sol-gel process

A series of ordered mesoporous silica loaded with iron oxide was synthesized by facile one-step sol-gel route using Pluronic P123 as the template, tetraethylorthosilicate as the silica source, and hydrated iron nitrite as the precursor under acid conditions. The as-synthesized materials with Fe/Si molar ratio ranging from 0.1 to 0.8 were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), and N₂ adsorption porosimetry. All samples possess ordered hexagonal mesoporous structure similar to SBA-15, with a high surface area, large pore volume, and uniform pore size. Although higher iron content causes a distortion of hexagonal ordering structure to some extent, the materials still maintain the ordered mesopore structure even with Fe/Si molar ratio as high as 0.8. Pore structure and TEM data suggest that iron oxide nanoparticles are buried within the silica wall, and increasing the iron oxide loading has little effects on the pore structure of the mesoporous silica. VSM results show as-synthesized samples exhibit superparamagnetic behavior.     

Synthesis and characterization of ordered mesoporous silica by using polystyrene microemulsion as templates

A simple room temperature synthesis of pure mesoporous silica by using a homemade and functional template: polystyrene microemulsion is reported. The process consists of HCl-catalysed sol-gel reactions of tetraethyl orthosilicate (TEOS) in polystyrene microemulsion, followed by removal of the template via solvent extraction or calcining. X-ray diffraction, Transmission Electron Microscope and N₂ adsorption-desorption isotherms are then used to characterize the mesostructure. The results indicate that the synthesized mesoporous silica has a large BET surface area with more than 900 m²/g, large pore volume with more than 0.8 cm³/g and ordered mesopore-structure. This provides a possible way to control the meso-structure and pore size of mesoporous materials via potential functional templates.     

Assemblies of biomaterials in mesoporous media

Assemblies of biomaterials onto mechanically stable inorganic structure are advantageous for the practical applications because of the potential to improve the stability and performance of biomaterials in the biocatalytic processes. Among many kinds of inorganic materials, mesoporous materials such as mesoporous silica and mesoporous carbon have attracted special attention owing to their well-defined structures and perfectly controlled pore geometries, which would lead to unique functions such as size selective adsorption of biomaterials. In the first part of this review, adsorption behaviors of proteins, enzymes, vitamins, and amino acids in aqueous solutions onto mesoporous media are systematically explained. Pore geometries (pore diameter and volume) of mesoporous materials are the crucial factors for the size selective adsorption of biomaterials, especially proteins, which often have a size comparable to pore dimension. The studies on the adsorption of biomaterials on the mesoporous carbon reveal that hydrophobic interaction between guest molecules and surface of the mesoporous materials is an important parameter which controls the amount of biomaterials adsorption. Enhanced adsorption of biomaterials was commonly observed at their isoelectric point, where electrostatic repulsion is minimized between the biomaterials. In addition, several functions such as biomolecular separation, reactor function, controlled drug release, and photochemical properties are discussed in the latter sections. Studies on assemblies of biomaterials in mesoporous media are still in initial stage, but the development of appropriately designed mesoporous materials would powerfully promote researches in these fascinating unexplored fields.     

General Construction of 2D Ordered Mesoporous Iron‐Based Metal–Organic Nanomeshes

Nanomeshes with highly regular, permeable pores in plane, combining the exceptional porous architectures with intrinsic properties of 2D materials, have attracted increasing attention in recent years. Herein, a series of 2D ultrathin metal–organic nanomeshes with ordered mesopores is obtained by a self‐assembly method, including metal phosphate and metal phosphonate. The resultant mesoporous ferric phytate nanomeshes feature unique 2D ultrathin monolayer morphologies ( ≈ 9 nm thickness), hexagonally ordered, permeable mesopores of ≈ 16 nm, as well as improved surface area and pore volume. Notably, the obtained ferric phytate nanomeshes can directly in situ convert into mesoporous sulfur‐doped metal phosphonate nanomeshes by serving as an unprecedented reactive self‐template. Furthermore, as advanced anode materials for Li‐ion batteries, they deliver excellent capacity, good rate capability, and cycling performance, greatly exceeding the similar metal phosphate‐based materials reported previously, resulting from their unique 2D ultrathin mesoporous structure. Therefore, the work will pave an avenue for constructing the other 2D ordered mesoporous materials, and thus offer new opportunities for them in diverse areas.     

单分散纳米介孔二氧化硅的制备

在温和碱性条件下,以十六烷基三甲基溴化铵为模板剂,正硅酸乙酯为硅源,三嵌段共聚物F127为助剂,制备出粒径为60～80 nm的单分散纳米介孔二氧化硅MCM-41.研究了F127的用量对介孔结构和纳米粒子分散性的影响.结果表明,适量的非离子表面活性剂F127具有助模板剂的作用,可以有效地提高纳米介孔粉体的有序性;过量的F127阻碍六方介孔相的形成,降低样品的有序性.F127与十六烷基三甲基溴化铵的摩尔比在0.04～0.08范围内,可以得到有序性好、孔径均一和孔隙率大的单分散纳米介孔二氧化硅MCM-41.     

TiO2 anatase nanoparticle networks: synthesis, structure, and electrochemical performance

Nanocrystalline anatase TiO(2) materials with different specific surface areas and pore size distributions are prepared via sol-gel and miniemulsion routes in the presence of surfactants. The samples are characterized by X-ray diffraction, nitrogen sorption, transmission electron microscopy, and electrochemical measurements. The materials show a pure anatase phase with average crystallite size of about 10 nm. The nitrogen sorption analysis reveals specific surface areas ranging from 25 to 150 m(2) g(-1) . It is demonstrated that the electrochemical performance of this material strongly depends on morphology. The mesoporous TiO(2) samples exhibit excellent high rate capabilities and good cycling stability.     

Hierarchical micro- and mesoporous carbide-derived carbon as a high-performance electrode material in supercapacitors

Ordered mesoporous carbide-derived carbon (OM-CDC) materials produced by nanocasting of ordered mesoporous silica templates are characterized by a bimodal pore size distribution with a high ratio of micropores. The micropores result in outstanding adsorption capacities and the well-defined mesopores facilitate enhanced kinetics in adsorption processes. Here, for the first time, a systematic study is presented, in which the effects of synthesis temperature on the electrochemical performance of these materials in supercapacitors based on a 1 M aqueous solution of sulfuric acid and 1-ethyl-3-methylimidazolium tetrafluoroborate ionic liquid are reported. Cyclic voltammetry shows the specific capacitance of the OM-CDC materials exceeds 200 F g(-1) in the aqueous electrolyte and 185 F g(-1) in the ionic liquid, when measured in a symmetric configuration in voltage ranges of up to 0.6 and 2 V, respectively. The ordered mesoporous channels in the produced OM-CDC materials serve as ion-highways and allow for very fast ionic transport into the bulk of the OM-CDC particles. At room temperature the enhanced ion transport leads to 75% and 90% of the capacitance retention at current densities in excess of ～10 A g(-1) in ionic liquid and aqueous electrolytes, respectively. The supercapacitors based on 250-300 μm OM-CDC electrodes demonstrate an operating frequency of up to 7 Hz in aqueous electrolyte. The combination of high specific capacitance and outstanding rate capabilities of the OM-CDC materials is unmatched by state-of-the art activated carbons and strictly microporous CDC materials.     

Mesoporous Nanoarchitectures for Electrochemical Energy Conversion and Storage

Mesoporous materials have attracted considerable attention because of their distinctive properties, including high surface areas, large pore sizes, tunable pore structures, controllable chemical compositions, and abundant forms of composite materials. During the last decade, there has been increasing research interest in constructing advanced mesoporous nanomaterials possessing short and open channels with efficient mass diffusion capability and rich accessible active sites for electrochemical energy conversion and storage. Here, the synthesis, structures, and energy-related applications of mesoporous nanomaterials are the main focus. After a brief summary of synthetic methods of mesoporous nanostructures, the delicate design and construction of mesoporous nanomaterials are described in detail through precise tailoring of the particle sizes, pore sizes, and nanostructures. Afterward, their applications as electrode materials for lithium-ion batteries, supercapacitors, water-splitting electrolyzers, and fuel cells are discussed. Finally, the possible development directions and challenges of mesoporous nanomaterials for electrochemical energy conversion and storage are proposed.