PGS@P-N阻燃剂的制备及增强EVA复合材料的 阻燃性能的研究

利用坡缕石表面的羟基，采用化学方法首先将坡缕石（PGS）用磷酸进行了改性，随后通过酸碱中和的方法，将十二胺接枝到磷酸分子上，得到改性的含P、N型复合阻燃剂PGS@P-N。通过SEM、 XRD、 FTIR等方法对所合成阻燃剂PGS@P-N的形貌和结构进行了表征，利用氧指数法(LOI)、垂直燃烧法(UL-94)和锥形量热法(CCT)对复合材料的阻燃性能进行了测试，并对复合材料的力学性能和相容性进行了考察。结果表明：当向EVA中加入质量分数为30%的PGS@P-N/EG后，EVA/PGS@P-N/EG(可膨胀石墨)复合材料的氧指数达到了36.3%，与EVA/PGS/EG比较，接入烷基链后，EVA/PGS@P-N/EG复合材料的断裂伸长率提高了40%。     

Preparation of expandable graphite with silicate assistant intercalation and its effect on flame retardancy of ethylene vinyl acetate composite

A halogen‐free intumescent flame retardant expandable graphite composite (EG), with an initial expansion temperature of 202°C and expansion volume of 517 mL g⁻¹, was successfully prepared via a facile two‐step intercalation method, i.e. using KMnO₄ as oxidant and H₂SO₄, Na₂SiO₃·9H₂O as intercalators. The prepared EG flame retardant was characterized by field emission scanning electron microscope, X‐ray diffraction spectroscopy, energy dispersive spectroscopy and Fourier transform infrared spectroscopy. Furthermore, flame retardancy and thermal property of various ethylene vinyl acetate copolymer (EVA) composites, including EVA/EG and EVA/EG/APP (ammonium polyphosphate) specimens, were studied through limiting oxygen index instrument (LOI), vertical combustion UL‐94 rating, thermal gravimetric and differential thermal analysis. The results indicate that the EVA/EG and EVA/EG/APP composites exhibit a better flame retardancy. Addition of EG at a mass fraction of 30% leads LOI of 70EVA/30EG composite improved to 28.7%. Even more, the synergistic effect between EG and APP improves the LOI of 70EVA/10APP /20EG composite to 30.7%. This synergistic efficiency is attributed to the formation of compact and stable layer‐structure, and the prepared EG can make EVA composite reach the UL‐94 level of V‐0. POLYM. COMPOS., 36:1407–1416, 2015. © 2014 Society of Plastics Engineers     

Combustion characteristics and synergistic effects of red phosphorus masterbatch with expandable graphite in the flame retardant HDPE/EVA composites

In this work, the flammability behaviors and synergistic effects of red phosphorus masterbatch (RPM) with expandable graphite (EG) in flame‐retardant high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites have been investigated by limiting oxygen index (LOI), UL‐94 test, cone calorimeter test (CCT), thermogravimetric analysis (TGA), Fourier‐transform infrared (FTIR) and scanning electron microscopy (SEM). The data obtained from LOI, UL‐94 test and CCT showed that suitable amount of RPM had synergistic effects with EG in the HDPE/EVA/EG/RPM composites. The addition of RPM greatly increased the LOI values by 3.4%, obtained UL‐94 V‐0 rating, decreased the heat release rates and total heat release, and prolongated the ignition time when 6.7 phr RPM substituted for EG in the HDPE/EVA/EG/RPM composites. The data from TGA and FTIR spectra also indicated the synergistic effects of RPM with EG considerably enhanced the thermal degradation temperatures. The morphological observations after UL‐94, CCT, and SEM images presented positive evidences that the synergistic effects took place for RPM with EG, and the flame‐retardant mechanism has been changed in flame‐retardant HDPE/EVA/EG/RPM composites. The formation of stable and compact charred residues promoted by RPM acted as effective heat barriers and thermal insulations, which improved the flame‐retardant performances and prevented the underlying polymer materials from burning. POLYM. ENG. SCI., 55:2884–2892, 2015. © 2015 Society of Plastics Engineers     

Synergistic effects of 4A zeolite on the flame‐retardant properties and thermal stability of an efficient halogen‐free flame‐retardant EVA composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy, and char formation of an efficient halogen‐free flame‐retardant ethylene‐vinyl acetate copolymer composite (EVA/IFR) were investigated by limited oxygen index (LOI), vertical burning test (UL‐94), cone calorimeter test (CCT), digital photography, scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), laser Raman spectroscopy (LRS) and thermogravimetric analytical (TGA) methods. It was found that a small amount of 4A clearly improved the LOI value of the EVA/IFR composite and reinforced the fire retardant performance with a great reduction in the combustion parameters of the EVA/IFR system from the CCT test. The entire composites passed the UL‐94 V‐0 rating test. The TGA and integral procedure decomposition temperature (IDPT) results showed that 4A enhanced the thermal stability of the EVA/IFR system and increased the char residue content effectively. The morphological structures observed by digital and SEM imaging revealed that 4A could promote EVA/IFR to form a more continuous and compact intumescent char layer. The LRS and EDS results demonstrated that by introduction of 4A into the EVA/IFR system, a more graphite structure was formed with increase phosphorus content in the char residue. POLYM. ENG. SCI., 56:380–387, 2016. © 2016 Society of Plastics Engineers     

Combustion characteristics of halogen‐free flame‐retarded polyethylene containing magnesium hydroxide and some synergists

Halogen‐free flame‐retarded polyethylene materials have been prepared by using magnesium hydroxide (MH) as a flame retardant combined with red phosphorous (RP) and expandable graphite (EG) as synergists. The effects of these additives on the combustion behavior of the filled linear low density polyethylene (LLDPE), such as a limiting oxygen index (LOI), the rate of heat release (RHR), the specific extinction area (SEA), etc., have been studied by the LOI determination and the cone calorimeter test. The results show that RP and EG are good synergists for improving the flame retardancy of LLDPE/MH formulations. In addition, a suitable amount of ethylene and vinyl acetate copolymer (EVA) added in the formulations can increase the LOI values while promoting the char formation and showing almost no effect on the RHR and SEA values. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 206–214, 2001     

Synergism between hydrotalcite and silicate‐modified expandable graphite on ethylene vinyl acetate copolymer combustion behavior

Influence of independent Mg–Al‐layered double hydroxide (LDH), silicate modified expandable graphite (EG), mixture of LDH and EG at various ratios on ethylene vinyl acetate copolymer (EVA) combustion behavior and thermal stability was detected in sequence through the limiting oxygen index (LOI), vertical combustion (UL‐94) level, microscale combustion calorimeter (MCC) tests and thermal gravimetric/differential thermal gravimetric (TG/DTG) analysis. Results show that the 30 wt % LDH can improve the LOI of 70EVA/30LDH to 27.0%, but the combustion accompanies with serious melt‐dropping. While, the same amount of the EG can increase the LOI, UL‐94 level to 28.5%, V‐0 respectively. However, the combination of LDH and EG can further enhance the 70EVA/20LDH/10EG flame retardancy, it presents the LOI of 29.7%, UL‐94 level of V‐0, and total heat release of 29.5 kJ g^?1. The excellent flame retardancy is attributed to its compact residue. Compared with residue mass, the residue compactness plays a more important role in improving flame retardancy. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44634.     

Synergistic effects of exfoliated LDH with some halogen‐free flame retardants in LDPE/EVA/HFMH/LDH nanocomposites

The synergistic effects of exfoliated layered double hydroxides (LDH) with some halogen‐free flame retardant (HFFR) additives, such as hyperfine magnesium hydroxide (HFMH), microencapsulated red phosphorus (MRP), and expandable graphite (EG), in the low‐density polyethylene/ethylene vinyl acetate copolymer/LDH (LDPE/EVA/LDH) nanocomposites have been studied by X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), thermal analysis (TGA and DTG), mechanical properties, limiting oxygen index (LOI), and UL‐94 tests. The XRD results show that EVA as an excellent compatilizer can promote the exfoliation of LDH and homogeneous dispersion of HFMH in the LDPE/EVA/HFMH/LDH nanocomposites prepared by melt‐intercalation method. The TEM images demonstrate that the exfoliated LDH layers can act as synergistic compatilizer and dispersant to make the HFMH particles dispersed homogeneously in the LDPE matrix. The results from the mechanical, LOI, and UL‐94 tests show that the exfoliated LDH layers can also act as the nano‐enhanced and flame retardant synergistic agents and thus increase the tensile strength, LOI values, and UL‐94 rating of the nanocomposites. The morphological structures of charred residues observed by SEM give the positive evidence that the compact charred layers formed from the LDPE/EVA/HFMH/LDH nanocomposites with the exfoliated LDH layers play an important role in the enhancement of flame retardant and mechanical properties. The TGA and DTG data show that the exfoliated LDH layers as excellent flame retardant synergist of MRP or EG can apparently increase the thermal degradation temperature and the charred residues after burning. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Expandable graphite systems for halogen‐free flame‐retarding of polyolefins. I. Flammability characterization and synergistic effect

The use of some types of expandable graphite (EG) as an intumescent flame‐retardant additive in polyolefins was studied using the cone calorimeter test (CCT), thermogravimetric analysis (TGA), the limiting oxygen index (LOI), and the‐UL 94 test and through measurement of EG's mechanical and electrical properties. The present study has shown that some suitable EG systems combined with other organic and inorganic halogen‐free flame‐retardant (HFFR) additives apparently can improve the flame‐retardant capacity with good mechanical properties of polyolefin blends. For linear low‐density polyethylene and/or ethylene vinyl acetate/EG/HFFR blends the limiting oxygen index can reach a rating above 29, and the UL‐94 test can produce a value of V–0. The CCT and TGA data show that the EG and EG/HFFR additives not only promoted the formation of carbonaceous char but also greatly decreased the heat release rate and the effective heat of combustion and increased the residues after burning. The synergistic effect of EG with other HFFR additives, such as zinc borate, the phosphorus–nitrogen compound NP28, and microcapsulated red phosphorus is examined and discussed in detail in this article. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1181–1189, 2001     

Effect of the particle size of expandable graphite on the thermal stability,flammability, and mechanical properties of high‐density polyethylene/ethylene vinyl‐acetate/expandable graphite composites

In this article, high‐density polyethylene/ethylene vinyl‐acetate copolymer (HDPE/EVA) composites filled with two different particle sizes (45 and 150 µm) of expandable graphite (EG) were prepared by using a twin‐screw extruder. The thermal stability, flammability, and mechanical properties of HDPE/EVA/EG composites were investigated by thermogravimetric analysis (TGA), cone calorimeter test (CCT), tensile test, and scanning electron microscopy (SEM). The results from TGA and CCT indicated that EG significantly enhanced the thermal stability and fire resistance of HDPE/EVA blend. The thermal stability and flame retardancy of HDPE/EVA/EG composites were improved with decreasing particle size of EG. Although the onset of weight loss of the flame‐retardant composites occurred at a lower temperature than that of HDPE/EVA blend, the flame‐retardant composites produced a large amount of char residue at a high temperature. The consolidated char layer formed a barrier, which could reduce heat, low‐molecular transfer, and air incursion, and thus enhanced the flame retardancy. The data from the tensile test showed that the addition of EG deteriorated the mechanical properties; however, the tensile stress and strain of HDPE/EVA/EG composites increased with decreasing the particle size of EG owing to the strong interface adhesion between polymer matrix and inorganic particles. POLYM. ENG. SCI., 54:1162–1169, 2014. © 2013 Society of Plastics Engineers     

Synergistic effect of ammonium polyphosphate and expandable graphite on flame‐retardant properties of acrylonitrile‐butadiene‐styrene

A new intumescent flame‐retardant (IFR) system consisting of expandable graphite (EG) and ammonium polyphosphate (APP) was applied in acrylonitrile–butadiene–styrene (ABS) resin. A synergistic effect between EG and APP on the flame retardancy of ABS was observed. Fixing the total loading of flame retardant at 15 wt %, the limited oxygen index (LOI) could reach 31 vol % at a weight ratio of 3 : 1 for EG and APP. While LOI values of EG‐ and APP‐filled ABS were only 26.0 and 21.5 vol % at the same loading, respectively. The UL‐94 vertical burning test suggested that samples with different ratios of EG and APP could all pass V‐0 rating while the samples containing EG and APP alone only passed V‐1 rating. Thermogravimetric analysis indicated that the addition of EG and APP (3 : 1 by weight) to ABS led to an increase in the amount of high‐temperature residue by 11.8 wt %, and a decrease of mass loss rate by 0.7%/°C compared with pure ABS. Scanning electronic microscopy revealed a homogeneous compact intumescent char layer of ABS/EG/APP samples. Based on our experiment and combined with others' previous studies, the synergistic mechanism is inferred. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Addition flame‐retardant effect of nonreactive phosphonate and expandable graphite in rigid polyurethane foams

A series of flame‐retardant rigid polyurethane foams (RPUFs) containing nonreactive phosphonate (5‐ethyl‐2‐methyl‐1,3,2‐dioxaphosphorinan‐5‐yl) methyl dimethyl phosphonate P‐oxide (EMD) and expandable graphite (EG) were prepared by water blown. The flame‐retardant properties and mechanism of EMD/EG on RPUFs were systematically investigated. The EMD/EG system effectively increased the limiting oxygen index (LOI) value and decreased the values of total heat release (THR), av‐effective heat of combustion (EHC), pk‐heat release rate (HRR), total smoke release (TSR) of RPUFs. The impact values of LOI, THR, and av‐EHC resulted by EMD/EG system are nearly equal to the sum of the impact values by EMD and EG individually in RPUFs, which implies the addition flame‐retardant effect from EMD and EG. EMD alone exerted excellent gas‐phase flame‐retardant effect by releasing PO fragments with quenching effect. The firm residue produced by EMD combined well with the loose and worm‐like expanded graphite from EG further to form compact and expanded char layer, which brought excellent barrier effect and filtration effect to matrix. That's why pk‐HRR and TSR values of RPUF reduced. Depending on the simultaneous actions of EMD/EG system in gas phase and condensed phase during combustion, the flame‐retardant effects from nonreactive phosphonate and EG on RPUFs were added together. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45960.     

Preparation of aluminum hydroxide/aluminum phosphinate flame‐retardant poly(vinyl alcohol) foam through thermal processing

A novel flame‐retardant poly (vinyl alcohol) (PVA) composite foam was prepared successfully through thermal processing, which was filled with high content of flame retardant, based on aluminum hydroxide (ATH) and aluminum phosphinate (AlPi) and using water as plasticizer and blowing agent. The flame‐retardant property and mechanism of the prepared foam matrix were studied by vertical burning test, limiting oxygen index (LOI), cone calorimeter, scanning electronic microscopy (SEM) and X‐ray photoelectron spectroscopy (XPS). The experimental results showed that the PVA/ATH/AlPi (1/1.2/0.05) composite achieved LOI value of 41% and UL94 V‐0 (3.2 mm) rate. The addition of ATH and AlPi into PVA matrix significantly decreased flammability of the composites, because a more compact and continuous char layer of the PVA/ATH/AlPi composite could be formed, due to the involvement of AlPi in the char‐forming reaction. Compared with the pure PVA sample, the peak heat release rate (PHRR) and total heat release (THR) of PVA/ATH/AlPi (1/1.2/0.05) composite were reduced by 76.5% and 58.2%, respectively. Built upon this PVA‐based foam matrix with good flame retardancy, the flame‐retardant PVA‐based foam was successfully prepared through thermal extrusion. In addition, the influence of water content on melt viscosity, foam structure and mechanical strength was also analyzed. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42020.     

Flame‐retardant and mechanical properties of high‐density rigid polyurethane foams filled with decabrominated dipheny ethane and expandable graphite

The article reported the flame‐retardant and the mechanical properties of expandable graphite (EG), an intumescent type, and decabrominated dipheny ethane (DBDPE), a gas‐phase type of flame‐retardant‐containing high‐density rigid polyurethane foams (RPUF) with a constant density of 0.5g/cm³. The results indicated that both EG and DBDPE could effectively interdict the burning of RPUF, besides, the EG exhibited more effective flame retardancy than the DBDPE. When the flame‐retardant loadings were 20 wt %, the LOI value of DBDPE‐filled RPUF increased to 33 vol %, while, surprisingly, the EG‐filled RPUF reached 41 vol %. Unfortunately, when they were both simultaneously added into RPUF, there was not any flame‐retardant synergistic effect. Although EG had outstanding flame retardancy, the compressive strength and modulus of 20 wt % EG‐filled RPUF dropped to only 9.1MPa and 229.7MPa respectively, which were lower than those of DBDPE (12.4 MPa and 246.8 MPa). The phenomena were ascribed to the different flame‐retardant mechanisms of EG and DBDPE, which were verified by scanning electronic microscope (SEM) observation of the burned surfaces. Besides, the dynamical mechanical analysis (DMA) demonstrated that the additions of EG and DBDPE made the glass transition temperature shift to the high temperatures, and the EG‐filled RPUF had the higher storage modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of borate–modified expandable graphite and its flame retardancy on acrylonitrile‐butadiene‐styrene resin

A borate‐modified expandable graphite (written as MEG) was prepared through one step intercalating reaction of natural graphite, using KMnO₄ as oxidant, H₂SO₄ and sodium tetraborate as intercalator and assistant intercalator, respectively. The dilatability, structure, element contents, thermal stability, and flame retardancy on acrylonitrile‐butadiene‐styrene (ABS) were investigated. Compared with the normal expandable graphite (written as EG, which was prepared with only H₂SO₄ as intercalator), the results show that MEG exhibits higher expandable property, thermal stability and flame retardancy on ABS. The EDS, FT‐IR, and XRD results reveal that borate has been inserted into graphite layers. With the addition of MEG or EG at a 30 wt%, LOI of 70ABS/30MEG composite improved to 27.9%, 2.2% higher than that of 70ABS/30EG. Moreover, the synergistic effect between MEG and traditional intumescent flame retardant (IFR, consists of ammonium polyphosphate (APP), pentaerythritol (PER), and melamine (MEL) with a mass ratio of 7.5:4.5:3.0) improves the LOI of 70ABS/15MEG/15IFR composite to 32.6%, and the UL‐94 level reaches V‐0. This synergistic efficiency is attributed to the formation of continuous and compact residual char. Addition of MEG together with IFR changes the ABS pyrolysis behavior, and there is not only physical synergy, but also chemical reaction. POLYM. COMPOS., 37:2673–2683, 2016. © 2015 Society of Plastics Engineers     

Application of a novel halogen‐free intumescent flame retardant for acrylonitrile‐butadiene‐styrene

A novel intumescent flame retardant (IFR), containing ammonium polyphosphate (APP) and poly(tetramethylene terephthalamide) (PA4T), was prepared to flame‐retard acrylonitrile‐butadiene‐styrene (ABS). The flame retardation of the IFR/ABS composite was characterized by limiting oxygen index (LOI) and UL‐94 test. Thermogravimetric analysis (TGA) and TGA coupled with Fourier transform infrared spectroscopy (TG‐FTIR) were carried out to study the thermal degradation behavior of the composite and look for the mechanism of the flame‐retarded action. The morphology of the char obtained after combustion of the composite was studied by scanning electron microscopy (SEM). It has been found the intumescent flame retardant showed good flame retardancy, with the LOI value of the PA4T/APP/ABS (7.5/22.5/70) system increasing from 18.5 to 30% and passing UL‐94 V‐1 rating. Meanwhile, the TGA and TG‐FTIR work indicated that PA4T could be effective as a carbonization agent and there was some reaction between PA4T and APP, leading to some crosslinked and high temperature stable material formed, which probably effectively promoted the flame retardancy of ABS. Moreover, it was revealed that uniform and compact intumescent char layer was formed after combustion of the intumescent flame‐retarded ABS composite. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Effect of OMMTs on flame retardancy and thermal stability of poly(ethylene‐co‐vinyl acetate)/LDPE/magnesium hydroxide composites

The aim of this study was to prepare poly (ethylene‐co‐vinyl acetate) (EVA)/ low density polyethylene (LDPE)/magnesium hydroxide (MH) composites applicable in cable industry with required flame retardancy. For this reason, two types of organo‐modified montmorillonites (OMMT) with different surface polarites (Cloisite 15A and Cloisite 30B) at various concentrations, and also combination of these two OMMTs with overall loadings of 2 wt % and 5 wt % were used. The samples were compounded using a twin screw extruder with total (MH + OMMT) feeding of 55 wt % and 60 wt %. Limiting oxygen index (LOI) of the samples containing 2 wt % of OMMTs increased about 16% and dripping was suppressed according to vertical burning test (UL‐94V). Thermogravimetric results of EVA/LDPE/MH samples containing OMMT showed that the beginning of second step degradation was shifted about 50°C to higher temperatures. The composite tensile strength results showed enhancement by incorporating some amount of nanoclays with EVA/LDPE/MH composites. Scanning electron microscopy images confirmed that MH particles had better wetting by EVA matrix in presence of nanoclays. Oxidative induction time of the EVA/LDPE/MH/OMMT nanocomposites was 140 min, which was more than that of the samples without OMMT (20 min). Employing the equal weight ratios of the two OMMTs demonstrated a synergistic effect on flame retardancy of the samples according to the both tests results (LOI, UL‐94V). X‐ray diffraction analysis of the samples confirmed the intercalation/semiexfoliation structure of nanosilicate layers in the bulk of EVA/LDPE matrix. This led to longer elongation at break and thermal stability of Cloisite 15A based nanocomposites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40452.     

Effects of ammonium polyphosphate and triphenyl phosphate on the flame retardancy,thermal, and mechanical properties of glass fiber–reinforced PLA/PC composites

The purpose of this study is to increase of the flammability properties of the glass fiber (GF)–reinforced poly (lactic acid)/polycarbonate (PLA/PC) composites. Ammonium polyphosphate (APP) and triphenyl phosphate (TPP) were used as flame retardants that are including the organic phosphor to increase flame retardancy of GF‐reinforced composites. APP, TPP, and APP‐TPP mixture flame retardant including composites were prepared by using extrusion and injection molding methods. The properties of the composites were determined by the tensile test, limiting oxygen index (LOI), differential scanning calorimetry (DSC), and heat release rate (HRR) test. The minimum T_g value was observed for the TPP including PLA/PC composites in DSC analysis. The highest tensile strength was observed in GF‐reinforced PLA/PC composites. In the LOI test, GF including composite was burned with the lowest concentration of oxygen, and burning time was the longest of this composite. However, the shortest burning time was obtained by using the mixture flame retardant system. The flame retardancy properties of GF‐reinforced PLA/PC composite was improved by using mixture flame retardant. When analyzed the results of HRR, time to ignition (TTI), and mass loss rate together, the best value was obtained for the composite including APP.     

Influence of the pentaerythritol phosphate melamine salt content on the combustion and thermal decomposition process of intumescent flame‐retardant ethylene–vinyl acetate copolymer composites

Pentaerythritol phosphate melamine salt (PPMS) as a single‐molecule intumescent fire retardant was synthesized and characterized. The influence of the PPMS content on the combustion and thermal decomposition processes of intumescent‐flame‐retardant (IFR) ethylene–vinyl acetate copolymer (EVA) composites was studied by limiting oxygen index (LOI) measurement, UL 94 rating testing, cone calorimetry, thermogravimetric analysis, and scanning electron microscopy. The LOI and UL 94 rating results illustrate that PPMS used in EVA improved the flame retardancy of the EVA composites. The cone calorimetry test results show that the addition of PPMS significantly decreased the heat‐release rate, total heat release, and smoke‐production rate and enhanced the residual char fire performance of the EVA composites. The IFR–EVA3 composite showed the lowest heat‐release and smoke‐production rates and the highest char residue; this means that the IFR–EVA3 composite had the best flame retardancy. The thermogravimetry results show that the IFR–EVA composites had more residual char than pure EVA; the char residue yield increased with increasing PPMS content. The analysis results for the char residue structures also illustrated that the addition of PPMS into the EVA resin helped to enhance the fire properties of the char layer and improve the flame retardancy of the EVA composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42148.     

A novel intumescent flame‐retardant system for flame‐retarded LLDPE/EVA composites

A new intumescent flame retardant (IFR) system consisting of ammonium polyphosphate (APP) and charing‐foaming agent (CFA) and a little organic montmorillonite (OMMT) was used in low‐density polyethylene (LLDPE)/ethylene‐vinyl acetate (EVA) composite. According to limiting oxygen index (LOI) value and UL‐94 rating obtained from this work, the reasonable mass ratio of APP to CFA was 3 : 1, and OMMT could obviously enhance the flame retardancy of the composites. Cone calorimeter (CONE) and thermogravimetric analysis (TGA) were applied to evaluate the burning behavior and thermal stability of IFR‐LLDPE/EVA (LLDPE/EVA) composites. The results of cone calorimeter showed that heat release rate peak (HRR‐peak) and smoke production rate peak (SPR‐peak) and time to ignition (TTI) of IFR‐LLDPE/EVA composites decreased clearly compared with the pure blend. TGA data showed that IFR could enhance the thermal stability of the composites at high temperature and effectively increase the char residue. The morphological structures of the composites observed by scanning electron microscopy (SEM) and X‐ray diffraction (XRD) demonstrated that OMMT could well disperse in the composites without exfoliation, and obviously improve the compatibility of components of IFR in LLDPE/EVA blend. The morphological structures of char layer obtained from Cone indicated that OMMT make the char layer structure be more homogenous and more stable. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

The combination of expandable graphite,organic montmorillonite,and magnesium hydrate as fire‐retardant additives for ethylene–propylene–diene monomer/chloroprene rubber foams

The fire retardancy and flame‐retardant mechanism of expandable graphite (EG), organic montmorillonite (OMMT), and magnesium hydrate (MH) in ethylene‐propylene‐diene monomer/chloroprene rubber (EPDM/CR) foams were investigated. The results indicated that the combination of EG and OMMT remarkably improved the fire‐retardant property compared to the control samples, and better fireproof performance was achieved when MH was used as the third coretardant unit. The structure of the obtained EPDM/CR/OMMT composites was characterized by X‐ray diffraction, and the results showed that the composites had an intercalated nanostructure. The limiting oxygen index, vertical burning test, and cone calorimeter test results showed that the LOI values and UL‐94 rating increased while the second peak of the heat release rates (HRR) decreased within the EG/OMMT system. In particular, the second pHRR disappeared when the EG/OMMT/MH system was used as a flame retardant. Moreover, the results of thermogravimetric analysis showed that the combination of EG and OMMT reduced the thermal‐degradation rates and mass‐loss percentages. Furthermore, observation by scanning electron microscopy revealed that EG and OMMT left over after combustion formed a complete, compact, and rigid charred layer with a mosaic structure of expanded graphite embedded in cortical‐honeycomb layers of OMMT. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44929.