Single Nickel Atoms on Nitrogen‐Doped Graphene Enabling Enhanced Kinetics of Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have arousing interest because of their high theoretical energy density. However, they often suffer from sluggish conversion of lithium polysulfides (LiPS) during the charge/discharge process. Single nickel (Ni) atoms on nitrogen‐doped graphene (Ni@NG) with Ni–N₄ structure are prepared and introduced to modify the separators of Li–S batteries. The oxidized Ni sites of the Ni–N₄ structure act as polysulfide traps, efficiently accommodating polysulfide ion electrons by forming strong S_x ^2????Ni? N bonding. Additionally, charge transfer between the LiPS and oxidized Ni sites endows the LiPS on Ni@NG with low free energy and decomposition energy barrier in an electrochemical process, accelerating the kinetic conversion of LiPS during the charge/discharge process. Furthermore, the large binding energy of LiPS on Ni@NG also shows its ability to immobilize the LiPS and further suppresses the undesirable shuttle effect. Therefore, a Li–S battery based on a Ni@NG modified separator exhibits excellent rate performance and stable cycling life with only 0.06% capacity decay per cycle. It affords fresh insights for developing single‐atom catalysts to accelerate the kinetic conversion of LiPS for highly stable Li–S batteries.     

A Highly Conductive MOF of Graphene Analogue Ni3(HITP)2 as a Sulfur Host for High‐Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have been considered as one of the most promising energy storage systems owing to their high theoretical capacity and energy density. However, their commercial applications are obstructed by sluggish reaction kinetics and rapid capacity degradation mainly caused by polysulfide shuttling. Herein, the first attempt to utilize a highly conductive metal–organic framework (MOF) of Ni₃(HITP)₂ graphene analogue as the sulfur host material to trap and transform polysulfides for high‐performance Li–S batteries is made. Besides, the traditional conductive additive acetylene black is replaced by carbon nanotubes to construct matrix conduction networks for triggering the rate and cycling performance of the active cathode. As a result, the S@Ni₃(HITP)₂ with sulfur content of 65.5 wt% shows excellent sulfur utilization, rate performance, and cyclic durability. It delivers a high initial capacity of 1302.9 mAh g^?1 and good capacity retention of 848.9 mAh g^?1 after 100 cycles at 0.2 C. Highly reversible discharge capacities of 807.4 and 629.6 mAh g^?1 are obtained at 0.5 and 1 C for 150 and 300 cycles, respectively. Such kinds of pristine MOFs with high conductivity and abundant polar sites reveal broad promising prospect for application in the field of high‐performance Li–S batteries.     

Design Nitrogen (N) and Sulfur (S) Co‐Doped 3D Graphene Network Architectures for High‐Performance Sodium Storage

To develop high‐performance sodium‐ion batteries (NIBs), electrodes should possess well‐defined pathways for efficient electronic/ionic transport. In this work, high‐performance NIBs are demonstrated by designing a 3D interconnected porous structure that consists of N, S co‐doped 3D porous graphene frameworks (3DPGFs‐NS). The most typical electrode materials (i.e., Na₃V₂(PO₄)₃ (NVP), MoS₂, and TiO₂) are anchored onto the 3DPGFs‐NS matrix (denoted as NVP@C@3DPGFs‐NS; MoS₂@C@3DPGFs‐NS and TiO₂@C@3DPGFs‐NS) to demonstrate its general process to boost the energy density of NIBs. The N, S co‐doped porous graphene structure with a large surface area offers fast ionic transport within the electrode and facilitates efficient electron transport, and thus endows the 3DPGFs‐NS‐based composite electrodes with excellent sodium storage performance. The resulting NVP@C@3DPGFs‐NS displays excellent electrochemical performance as both cathode and anode for NIBs. The MoS₂@C@3DPGFs‐NS and TiO₂@C@3DPGFs‐NS deliver capacities of 317 mAhg^?1 at 5 Ag^?1 after 1000 cycles and 185 mAhg^?1 at 1 Ag^?1 after 2000 cycles, respectively. The excellent long cycle life is attributed to the 3D porous structure that could greatly release mechanical stress from repeated Na⁺ extraction/insertion. The novel structure 3D PGFs‐NS provides a general approach to modify electrodes of NIBs and holds great potential applications in other energy storage fields.     

Yolk–Shelled C@Fe3O4 Nanoboxes as Efficient Sulfur Hosts for High‐Performance Lithium–Sulfur Batteries

Owing to the high theoretical specific capacity (1675 mA h g^?1) and low cost, lithium–sulfur (Li–S) batteries offer advantages for next‐generation energy storage. However, the polysulfide dissolution and low electronic conductivity of sulfur cathodes limit the practical application of Li–S batteries. To address such issues, well‐designed yolk–shelled carbon@Fe₃O₄ (YSC@Fe₃O₄) nanoboxes as highly efficient sulfur hosts for Li–S batteries are reported here. With both physical entrapment by carbon shells and strong chemical interaction with Fe₃O₄ cores, this unique architecture immobilizes the active material and inhibits diffusion of the polysulfide intermediates. Moreover, due to their high conductivity, the carbon shells and the polar Fe₃O₄ cores facilitate fast electron/ion transport and promote continuous reactivation of the active material during the charge/discharge process, resulting in improved electrochemical utilization and reversibility. With these merits, the S/YSC@Fe₃O₄ cathodes support high sulfur content (80 wt%) and loading (5.5 mg cm^?2) and deliver high specific capacity, excellent rate capacity, and long cycling stability. This work provides a new perspective to design a carbon/metal‐oxide‐based yolk–shelled framework as a high sulfur‐loading host for advanced Li–S batteries with superior electrochemical properties.     

Superhierarchical Cobalt‐Embedded Nitrogen‐Doped Porous Carbon Nanosheets as Two‐in‐One Hosts for High‐Performance Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries, based on the redox reaction between elemental sulfur and lithium metal, have attracted great interest because of their inherently high theoretical energy density. However, the severe polysulfide shuttle effect and sluggish reaction kinetics in sulfur cathodes, as well as dendrite growth in lithium‐metal anodes are great obstacles for their practical application. Herein, a two‐in‐one approach with superhierarchical cobalt‐embedded nitrogen‐doped porous carbon nanosheets (Co/N‐PCNSs) as stable hosts for both elemental sulfur and metallic lithium to improve their performance simultaneously is reported. Experimental and theoretical results reveal that stable Co nanoparticles, elaborately encapsulated by N‐doped graphitic carbon, can work synergistically with N heteroatoms to reserve the soluble polysulfides and promote the redox reaction kinetics of sulfur cathodes. Moreover, the high‐surface‐area pore structure and the Co‐enhanced lithiophilic N heteroatoms in Co/N‐PCNSs can regulate metallic lithium plating and successfully suppress lithium dendrite growth in the anodes. As a result, a full lithium–sulfur cell constructed with Co/N‐PCNSs as two‐in‐one hosts demonstrates excellent capacity retention with stable Coulombic efficiency.     

Design Principles for Heteroatom‐Doped Nanocarbon to Achieve Strong Anchoring of Polysulfides for Lithium–Sulfur Batteries

Lithium–sulfur (Li–S) batteries have been intensively concerned to fulfill the urgent demands of high capacity energy storage. One of the major unsolved issues is the complex diffusion of lithium polysulfide intermediates, which in combination with the subsequent paradox reactions is known as the shuttle effect. Nanocarbon with homogeneous nonpolar surface served as scaffolding materials in sulfur cathode basically cannot afford a sufficient binding and confining effect to maintain lithium polysulfides within the cathode. Herein, a systematical density functional theory calculation of various heteroatoms‐doped nanocarbon materials is conducted to elaborate the mechanism and guide the future screening and rational design of Li–S cathode for better performance. It is proved that the chemical modification using N or O dopant significantly enhances the interaction between the carbon hosts and the polysulfide guests via dipole–dipole electrostatic interaction and thereby effectively prevents shuttle of polysulfides, allowing high capacity and high coulombic efficiency. By contrast, the introduction of B, F, S, P, and Cl monodopants into carbon matrix is unsatisfactory. To achieve the strong‐couple effect toward Li₂S_x, the principles for rational design of doped carbon scaffolds in Li–S batteries to achieve a strong electrostatic dipole–dipole interaction are proposed. An implicit volcano plot is obtained to describe the dependence of binding energies on electronegativity of dopants. Moreover, the codoping strategy is predicted to achieve even stronger interfacial interaction to trap lithium polysulfides.     

3D Mesoporous Graphene: CVD Self‐Assembly on Porous Oxide Templates and Applications in High‐Stable Li‐S Batteries

A nanostructured carbon with high specific surface area (SSA), tunable pore structure, superior electrical conductivity, mechanically robust framework, and high chemical stability is an important requirement for electrochemical energy storage. Porous graphene fabricated by chemical activation and liquid etching has a high surface area but very limited volume of electrochemically accessible mesopores. Herein, an effective strategy of in situ formation of hierarchically mesoporous oxide templates with small pores induced by Kirkendall diffusion and large pores attributed to evaporation of deliberately introduced volatile metal is proposed for chemical vapor deposition assembly of porous graphene frameworks (PGFs). The PGFs inherit the hierarchical mesoporous structure of the templates. A high SSA of 1448 m² g⁻¹, 91.6% of which is contributed by mesopores, and a mesopore volume of 2.40 cm³ g⁻¹ are attained for PGFs serving as reservoirs of ions or active materials in electrochemical energy storage applications. When the PGFs are applied in lithium‐sulfur batteries, a very high sulfur utilization of 71% and a very low fading rate of ≈0.04% per cycle after the second cycle are achieved at a current rate of 1.0 C. This work provides a general strategy for the rational construction of mesoporous structures induced by a volatile metal, with a view toward the design of hierarchical nanomaterials for advanced energy storage.