All‐Solution‐Processed Metal‐Oxide‐Free Flexible Organic Solar Cells with Over 10% Efficiency

All‐solution‐processing at low temperatures is important and desirable for making printed photovoltaic devices and also offers the possibility of a safe and cost‐effective fabrication environment for the devices. Herein, an all‐solution‐processed flexible organic solar cell (OSC) using poly(3,4‐ethylenedioxythiophene):poly‐(styrenesulfonate) electrodes is reported. The all‐solution‐processed flexible devices yield the highest power conversion efficiency of 10.12% with high fill factor of over 70%, which is the highest value for metal‐oxide‐free flexible OSCs reported so far. The enhanced performance is attributed to the newly developed gentle acid treatment at room temperature that enables a high‐performance PEDOT:PSS/plastic underlying substrate with a matched work function (≈4.91 eV), and the interface engineering that endows the devices with better interface contacts and improved hole mobility. Furthermore, the flexible devices exhibit an excellent mechanical flexibility, as indicated by a high retention (≈94%) of the initial efficiency after 1000 bending cycles. This work provides a simple route to fabricate high‐performance all‐solution‐processed flexible OSCs, which is important for the development of printing, blading, and roll‐to‐roll technologies.     

Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells

Organic solar cell optimization requires careful balancing of current–voltage output of the materials system. Here, such optimization using ultrafast spectroscopy as a tool to optimize the material bandgap without altering ultrafast photophysics is reported. A new acceptor–donor–acceptor (A–D–A)‐type small‐molecule acceptor NCBDT is designed by modification of the D and A units of NFBDT. Compared to NFBDT, NCBDT exhibits upshifted highest occupied molecular orbital (HOMO) energy level mainly due to the additional octyl on the D unit and downshifted lowest unoccupied molecular orbital (LUMO) energy level due to the fluorination of A units. NCBDT has a low optical bandgap of 1.45 eV which extends the absorption range toward near‐IR region, down to ≈860 nm. However, the 60 meV lowered LUMO level of NCBDT hardly changes the V_oc level, and the elevation of the NCBDT HOMO does not have a substantial influence on the photophysics of the materials. Thus, for both NCBDT‐ and NFBDT‐based systems, an unusually slow (≈400 ps) but ultimately efficient charge generation mediated by interfacial charge‐pair states is observed, followed by effective charge extraction. As a result, the PBDB‐T:NCBDT devices demonstrate an impressive power conversion efficiency over 12%—among the best for solution‐processed organic solar cells.     

Realizing Over 13% Efficiency in Green‐Solvent‐Processed Nonfullerene Organic Solar Cells Enabled by 1,3,4‐Thiadiazole‐Based Wide‐Bandgap Copolymers

Two novel wide‐bandgap copolymers, PBDT‐TDZ and PBDTS‐TDZ, are developed based on 1,3,4‐thiadiazole (TDZ) and benzo[1,2‐b:4,5‐b′]dithiophene (BDT) building blocks. These copolymers exhibit wide bandgaps over 2.07 eV and low‐lying highest occupied molecular orbital (HOMO) levels below −5.35 eV, which match well with the typical low‐bandgap acceptor of ITIC, resulting in a good complementary absorption from 300 to 900 nm and a low HOMO level offset (≤0.13 eV). Compared to PBDT‐TDZ, PBDTS‐TDZ with alkylthio side chains exhibits the stronger optical absorption, lower‐lying HOMO level, and higher crystallinity. By using a single green solvent of o‐xylene, PBDTS‐TDZ:ITIC devices exhibit a large open‐circuit voltage (V_oc) up to 1.10 eV and an extremely low energy loss (E_loss) of 0.48 eV. At the same time, the desirable high short‐circuit current density (J_sc) of 17.78 mA cm⁻² and fill factor of 65.4% are also obtained, giving rise to a high power conversion efficiency (PCE) of 12.80% without any additive and post‐treatment. When adopting a homotandem device architecture, the PCE is further improved to 13.35% (certified as 13.19%) with a much larger V_oc of 2.13 V, which is the best value for any type of homotandem organic solar cells reported so far.     

High‐Performance As‐Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency

In this work, a nonfullerene polymer solar cell (PSC) based on a wide bandgap polymer donor PM6 containing fluorinated thienyl benzodithiophene (BDT‐2F) unit and a narrow bandgap small molecule acceptor 2,2′‐((2Z,2′Z)‐((4,4,9,9‐tetrahexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(methanylylidene))bis(3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile (IDIC) is developed. In addition to matched energy levels and complementary absorption spectrum with IDIC, PM6 possesses high crystallinity and strong π–π stacking alignment, which are favorable to charge carrier transport and hence suppress recombination in devices. As a result, the PM6:IDIC‐based PSCs without extra treatments show an outstanding power conversion efficiency (PCE) of 11.9%, which is the record value for the as‐cast PSC devices reported in the literature to date. Moreover, the device performances are insensitive to the active layer thickness (≈95–255 nm) and device area (0.20–0.81 cm²) with PCEs of over 11%. Besides, the PM6:IDIC‐based flexible PSCs with a large device area of 1.25 cm² exhibit a high PCE of 6.54%. These results indicate that the PM6:IDIC blend is a promising candidate for future roll‐to‐roll mass manufacturing and practical application of highly efficient PSCs.     

Compositional Engineering for Thermally Stable,Highly Efficient Perovskite Solar Cells Exceeding 20% Power Conversion Efficiency with 85 °C/85% 1000 h Stability

Perovskite solar cells have received great attention because of their rapid progress in efficiency, with a present certified highest efficiency of 23.3%. Achieving both high efficiency and high thermal stability is one of the biggest challenges currently limiting perovskite solar cells because devices displaying stability at high temperature frequently suffer from a marked decrease of efficiency. In this report, the relationship between perovskite composition and device thermal stability is examined. It is revealed that Rb can suppress the growth of PbI₂ even under PbI₂‐rich conditions and decreasing the Br ratio in the perovskite absorber layer can prevent the generation of unwanted RbBr‐based aggregations. The optimized device achieved by engineering perovskite composition exhibits 92% power conversion efficiency retention in a stress test conducted at 85 °C/85% relative humidity (RH) according to an international standard (IEC 61215) while exceeding 20% power conversion efficiency (certified efficiency of 20.8% at 1 cm²). These results reveal the great potential for the practical use of perovskite solar cells in the near future.     

Cosensitized Quantum Dot Solar Cells with Conversion Efficiency over 12%

The improvement of sunlight utilization is a fundamental approach for the construction of high‐efficiency quantum‐dot‐based solar cells (QDSCs). To boost light harvesting, cosensitized photoanodes are fabricated in this work by a sequential deposition of presynthesized Zn–Cu–In–Se (ZCISe) and CdSe quantum dots (QDs) on mesoporous TiO₂ films via the control of the interactions between QDs and TiO₂ films using 3‐mercaptopropionic acid bifunctional linkers. By the synergistic effect of ZCISe‐alloyed QDs with a wide light absorption range and CdSe QDs with a high extinction coefficient, the incident photon‐to‐electron conversion efficiency is significantly improved over single QD‐based QDSCs. It is found that the performance of cosensitized photoanodes can be optimized by adjusting the size of CdSe QDs introduced. In combination with titanium mesh supported mesoporous carbon as a counterelectrode and a modified polysulfide solution as an electrolyte, a champion power conversion efficiency up to 12.75% (V_oc = 0.752 V, J_sc = 27.39 mA cm^?2, FF = 0.619) is achieved, which is, as far as it is known, the highest efficiency for liquid‐junction QD‐based solar cells reported.     

Novel Meso‐Superstructured Solar Cells with a High Efficiency Exceeding 12%

The dye‐sensitized solar cell (DSSC) is representative of next generation photovoltaic devices. State‐of‐the‐art DSSCs have been established for two decades. However, the recent application of organic‐inorganic hybrid perovskites on nanoparticle Al₂O₃ film has totally changed the DSSC structure, leading to a new type of solar cell — meso‐superstructured solar cells (MSSCs) with a high power conversion efficiency exceeding 12%. This article summarizes this impressive progress and discusses the challenges of MSSCs.