In-network caching for energy efficiency in content-centric networking

Recently, Internet energy efficiency is paid more and more attention. New Internet architectures with more energy efficiency were proposed to promote the scalability in energy consumption. The eontent-eentrie networking （CCN） proposed a content-centric paradigm which was proven to have higher energy efficiency. Based on the energy optimization model of CCN with in-network caching, the authors derive expressions to tradeoff the caching energy and the transport energy, and then design a new energy efficiency cache scheme based on virtual round trip time （EV） in CCN. Simulation results show that the EV scheme is better than the least recently used （LRU） and popularity based cache policies on the network average energy consumption, and its average hop is also much better than LRU policy.     

An efficient in‐network caching decision algorithm for Internet of things

Recently, content‐centric networking (CCN) has become one of the important technologies for enabling the future networks. Along with its recognized potentialities as a content retrieval and dissemination solution, CCN has been also recently considered as a promising architecture for the Internet of things (IoT), because of 2 main features such as named‐based routing and in‐network caching. However, IoT is characterized by challenging features: small storage capacity of resource‐constrained devices due to cost and limitation of energy and especially transient data that impose stringent requirements on the information freshness. As a consequence, the intrinsic caching mechanisms existing in CCN approach do not well suit IoT domains; hence, providing a specific caching policy at intermediate nodes is a very challenging task. This paper proposes an effective multiattribute in‐network caching decision algorithm that performs a caching strategy in CCN‐IoT network by considering a set of crucial attributes including the content store size, hop count, particularly key temporal properties like data freshness, and the node energy level. Simulation results proved that our proposed approach outperforms 2 cache management schemes (probabilistic least recently used and AlwaysCache–first in first out in terms of improving total hit rate, reducing data retrieval delay, and enhancing content reusability in IoT environment).     

内容中心网络中能耗优化的隐式协作缓存机制

综合考虑内容中心网络(CCN)的能耗优化及性能提升,该文提出一种内容中心网络中能耗优化的隐式协作缓存机制。缓存决策时,利用缓存节能量作为判决条件优先在用户远端节点缓存,并利用数据包携带最近上游缓存跳数信息进行隐式协作,减轻用户近端节点缓存空间的竞争压力,提高邻近节点缓存的差异性。缓存替换时,选取缓存节能量最小的缓存内容加以替换,达到最优的能耗优化效果。仿真结果表明,该缓存机制在性能上获得较优的缓存命中率及平均路由跳数,同时有效降低了网络能耗。     

Dynamic theoretic proactive caching placement game for energy saving in H‐CRAN

Edge caching is an effective feature of the next 5G network to guarantee the availability of the service content and a reduced time response for the user. However, the placement of the cache content remains an issue to fully take advantage of edge caching. In this paper, we address the proactive caching problem in Heterogeneous Cloud Radio Access Network (H‐CRAN) from a game theoretic point of view. The problem is formulated as a bargaining game where the remote radio heads (RRHs) dynamically negotiate and decide which content to cache in which RRH under energy saving and cache capacity constraints. The Pareto optimal equilibrium is proved for the cooperative game by the iterative Nash bargaining algorithm. We compare between cooperative and noncooperative proactive caching games and demonstrate how the selfishness of different players can affect the overall system performance. We also showed that our cooperative proactive caching game improves the energy consumption of 40% as compared with noncooperative game and of 68% to no‐game strategy. Moreover, the number of satisfied requests at the RRHs with the proposed cooperative proactive caching scheme is significantly increased.     

End‐to‐end mobility support in content centric networks

Content‐centric networking (CCN) has been recently proposed as an alternative to traditional IP‐based networking. In CCN, content is accessed by content name instead of a host identifier (locational identifier). This new type of access methodology rapidly and efficiently disseminates content in combination with the in‐network caching mechanism. For practical use of CCN, many network properties studied in IP‐based networking are being revisited, and new types of CCN architecture components are being designed. Although mobility is an essential aspect of the future networking system, it has not been sufficiently studied. We therefore address fundamental mobility issues, such as seamless handover, optimal access point selection, network mobility, and handling of persistent interests. In addition, for each issue, we propose practical solutions that efficiently align to a CCN environment. To ensure seamless handoff, we propose various handoff schemes and compare their performance in terms of handoff latency using packet‐level simulation. Because our proposed schemes are consistent with the characteristics and rules of CCN, we believe that they can easily be integrated as a part of CCN. Copyright © 2014 John Wiley & Sons, Ltd.     

Cache‐at‐relay: energy‐efficient content placement for next‐generation wireless relays

Uploading and downloading content have recently become one of the major reasons for the growth of Internet traffic volume. With the increasing popularity of social networking tools and their video upload/download applications, as well as the connectivity enhancements in wireless networks, it has become a second nature for mobile users to access on‐demand content on‐the‐go. Urban hot spots, usually implemented via wireless relays, answer the bandwidth need of those users. On the other hand, the same popular contents are usually acquired by a large number of users at different times, and fetching those from the initial content source each and every time makes inefficient use of network resources. In‐network caching provides a solution to this problem by bringing contents closer to the users. Although in‐network caching has been previously studied from latency and transport energy minimization perspectives, energy‐efficient schemes to prolong user equipment lifetime have not been considered. To address this problem, we propose the cache‐at‐relay (CAR) scheme, which utilizes wireless relays for in‐network caching of popular contents with content access and caching energy minimization objectives. CAR consists of three integer linear programming models, namely, select relay, place content, and place relay, which respectively solve content access energy minimization, joint minimization of content access and caching energy, and joint minimization of content access energy and relay deployment cost problems. We have shown that place relay significantly minimizes the content access energy consumption of user equipments, while place content provides a compromise between the content access and the caching energy budgets of the network. Copyright © 2015 John Wiley & Sons, Ltd.     

Time‐aware and energy‐efficient opportunistic routing with residual energy collection in wireless sensor networks

In 1‐dimensional queue wireless sensor networks, how to balance end‐to‐end latency and energy consumption is a challenging problem. However, traditional best path routing and existing opportunistic routing protocols do not address them well because relay hop counts are usually much more, and the link appears more unreliable compared with general mesh topology. In this work, we formulate these 2 problems as a multiobjective optimization problem. Specifically, we first classify network packets into types of time tolerant and time critical and introduce a residual energy collection mechanism of neighboring nodes for forwarder set selection. We then propose a time‐aware and energy‐efficient opportunistic routing protocol (TE‐OR) to optimize energy consumption and to reduce latency for time‐critical packets. We evaluate TE‐OR by different parameters and compare it with existing protocols. The performance results show that TE‐OR achieves a trade‐off between energy consumption and time delay and balances energy consumption among nodes while guaranteeing the latency of time‐critical packets is minimized.     

Location‐based distributed caching for device‐to‐device communications underlaying cellular networks

Device‐to‐device (D2D) communications have been viewed as a promising data offloading solution in cellular networks because of the explosive growth of multimedia applications. Because of the nature of distributed device location, distributed caching becomes an important function of D2D communications. By taking advantage of the caching capacity of the device, in this work, we explore the device storage and file frequent reuse to realize distributed content dissemination, that is, storing contents in mobile devices (named helpers). Specifically, we first investigate the average and lower bound of helper amount by dividing the network into small areas where the nodes are within each other's communication radius. Then, optimal helper amount is derived based on average helper amount and network topology. Subsequently, a location‐based distributed helper selection scheme for distributed caching is proposed based on the given optimal helper amount. In particular, nodes are selected as helpers according to their locations and degrees, and contents are placed in the manner for maximizing total user utility. Extensive simulation results demonstrate the factors that affect the optimal helper amount and the total user utility. Copyright © 2015 John Wiley & Sons, Ltd.     

Fast convergence caching replacement algorithm based on dynamic classification for content-centric networks

One of the key research fields of content-centric networking （CCN） is to develop more efficient cache replacement policies to improve the hit ratio of CCN in-network caching. However, most of existing cache strategies designed mainly based on the time or frequency of content access, can not properly deal with the problem of the dynamicity of content popularity in the network. In this paper, we propose a fast convergence caching replacement algorithm based on dynamic classification method for CCN, named as FCDC. It develops a dynamic classification method to reduce the time complexity of cache inquiry, which achieves a higher caching hit rate in comparison to random classification method under dynamic change of content popularity. Meanwhile, in order to relieve the influence brought about by dynamic content popularity, it designs a weighting function to speed up cache hit rate convergence in the CCN router. Experimental results show that the proposed scheme outperforms the replacement policies related to least recently used （LRU） and recent usage frequency （RUF） in cache hit rate and resiliency when content popularity in the network varies.     

Real‐time performance evaluation of asynchronous time division traffic‐aware and delay‐tolerant scheme in ad hoc sensor networks

Wireless infrastructureless networks demand high resource availability with respect to the progressively decreasing energy consumption. A variety of new applications with different service requirements demand fairness to the service provision and classification, and reliability in an end‐to‐end manner. High‐priority packets are delivered within a hard time delay bound whereas improper power management in wireless networks can substantially degrade the throughput and increase the overall energy consumed. In this work a new scheme is being proposed and evaluated in real time using a state‐based layered oriented architecture for energy conservation (EC). The proposed scheme uses the node's self‐tuning scheme, where each node is assigned with a dissimilar sleep and wake time, based on traffic that is destined for each node. This approach is based on stream's characteristics with respect to different caching behavioral and storage‐capacity characteristics, and considers a model concerning the layered connectivity characteristics for enabling the EC mechanism. EC characteristics are modeled and through the designed tiered architecture the estimated metrics of the scheme can be bounded and tuned into certain regulated values. The real‐time evaluation results were extracted by using dynamically moving and statically located sensor nodes. A performance comparison is done with respect to different data traffic priority classifications following a real‐time asymmetrical transmission channel. Results have shown the scheme's efficiency in conserving energy while the topology configuration changes with time. Copyright © 2009 John Wiley & Sons, Ltd.     

Routing protocol development for quality of service optimization of video‐on‐demand system over mobile ad hoc networks

A video‐on‐demand (VoD) application system over mobile ad hoc networks typically requires particular quality of service (QoS) parameters to be achieved. In this paper, we have proposed a novel QoS‐based routing protocol called as mobile VoD protocol. This protocol has been developed for improving the QoS of the mobile VoD system (normal Mobi_VoD approach). The protocol uses customer caching scheme for storing the first fragment of the entire video in the mobile customers and thereafter broadcast them when the new mobile customers missed the portion of the already transmitted first fragment for reducing the service delay of the customer, consequently optimizing QoS parameters. Various scenarios have been studied, and the efficacy of simulation results proves that the proposed system architecture in which the mobile customers use an ad hoc network caching scheme (mobile VoD protocol) is more efficient and performs better than the existing system (ad hoc on‐demand distance vector protocol) when compared in terms of QoS parameters such as the end‐to‐end delay, energy consumption, packet delivery ratio, throughput, and overhead.     

Energy efficient MAC protocol for delay‐sensitive data transmission over wireless sensor network

This paper presents an energy efficient medium access control (MAC) protocol for delay‐sensitive data transmission over wireless sensor network. In general, energy consumption and delay depend on channel monitoring interval (CMI) and data sensing period at each sensor node. Based on this fact, we propose a new preamble structure to effectively advertise CMI and avoid the overhearing problem. In order to pursue an effective tradeoff between energy consumption and delay, we also develop a CMI determining algorithm that searches for a sub‐optimal solution with a low computational complexity in a distributive way. Finally, experimental results are provided to compare the proposed MAC protocol with existing sensor MAC protocols. Copyright © 2010 John Wiley & Sons, Ltd.     

Energy‐aware geographic routing in wireless sensor networks with anchor nodes

Energy efficiency has become an important design consideration in geographic routing protocols for wireless sensor networks because the sensor nodes are energy constrained and battery recharging is usually not feasible. However, numerous existing energy‐aware geographic routing protocols are energy‐inefficient when the detouring mode is involved in the routing. Furthermore, most of them rarely or at most implicitly take into account the energy efficiency in the advance. In this paper, we present a novel energy‐aware geographic routing (EAGR) protocol that attempts to minimize the energy consumption for end‐to‐end data delivery. EAGR adaptively uses an existing geographic routing protocol to find an anchor list based on the projection distance of nodes for guiding packet forwarding. Each node holding the message utilizes geographic information, the characteristics of energy consumption, and the metric of advanced energy cost to make forwarding decisions, and dynamically adjusts its transmission power to just reach the selected node. Simulation results demonstrate that our scheme exhibits higher energy efficiency, smaller end‐to‐end delay, and better packet delivery ratio compared to other geographic routing protocols. Copyright © 2011 John Wiley & Sons, Ltd.     

LRP: Link quality‐aware queue‐based spectral clustering routing protocol for underwater acoustic sensor networks

Recently, underwater acoustic sensor networks (UASNs) have been considered as a promising approach for monitoring and exploring the oceans in lieu of traditional underwater wireline instruments. As a result, a broad range of applications exists ranging from oil industry to aquaculture and includes oceanographic data collection, disaster prevention, offshore exploration, assisted navigation, tactical surveillance, and pollution monitoring. However, the unique characteristics of underwater acoustic communication channels, such as high bit error rate, limited bandwidth, and variable delay, lead to a large number of packet drops, low throughput, and significant waste of energy because of packets retransmission in these applications. Hence, designing an efficient and reliable data communication protocol between sensor nodes and the sink is crucial for successful data transmission in underwater applications. Accordingly, this paper is intended to introduce a novel nature‐inspired evolutionary link quality‐aware queue‐based spectral clustering routing protocol for UASN‐based underwater applications. Because of its distributed nature, link quality‐aware queue‐based spectral clustering routing protocol successfully distributes network data traffic load evenly in harsh underwater environments and avoids hotspot problems that occur near the sink. In addition, because of its double check mechanism for signal to noise ratio and Euclidean distance, it adopts opportunistically and provides reliable dynamic cluster‐based routing architecture in the entire network. To sum up, the proposed approach successfully finds the best forwarding relay node for data transmission and avoids path loops and packet losses in both sparse and densely deployed UASNs. Our experimental results obtained in a set of extensive simulation studies verify that the proposed protocol performs better than the existing routing protocols in terms of data delivery ratio, overall network throughput, end‐to‐end delay, and energy efficiency.     

Cross‐layer design for topology control and routing in MANETs

A mobile ad hoc network (MANET) is a self‐organized and adaptive wireless network formed by dynamically gathering mobile nodes. Since the topology of the network is constantly changing, the issue of routing packets and energy conservation become challenging tasks. In this paper, we propose a cross‐layer design that jointly considers routing and topology control taking mobility and interference into account for MANETs. We called the proposed protocol as Mobility‐aware Routing and Interference‐aware Topology control (MRIT) protocol. The main objective of the proposed protocol is to increase the network lifetime, reduce energy consumption, and find stable end‐to‐end routes for MANETs. We evaluate the performance of the proposed protocol by comprehensively simulating a set of random MANET environments. The results show that the proposed protocol reduces energy consumption rate, end‐to‐end delay, interference while preserving throughput and network connectivity. Copyright © 2010 John Wiley & Sons, Ltd.     

QoS‐aware cross‐domain collaborative energy‐saving mechanism for FiWi virtual networks

The fiber‐wireless (FiWi) access network is a very promising solution for next‐generation access networks. Because of the different protocols between its subnets, it is hard to globally optimize the operation of FiWi networks. Network virtualization technology is applied to FiWi networks to realize the coexistence of heterogeneous networks and centralized control of network resource. The existing virtual resource management methods always be designed to optimize virtual network (VN) request acceptance rate and survivability, but seldom consider energy consumption and varied requirements of quality of service (QoS) satisfaction, which is a hot and important topic in the industrial field. Therefore, this paper focuses on the QoS‐aware cross‐domain collaborative energy saving mechanism for FiWi virtual networks. First, the virtual network embedding (VNE) model, energy consumption model, and VNE profit model of FiWi networks are established. Then, a QoS‐aware in‐region VN embedding mechanism is proposed to guarantee service quality of different services. After that, an underlying resource updating mechanism based on energy efficiency awareness is designed to realize low‐load ONU and wireless routers co‐sleep in FiWi networks. Finally, a QoS‐aware re‐embedding mechanism is presented to allocate proper resource to the VNs affected by the sleeping mechanism. Especially for video VNs, a re‐embedding scheme which adopts traffic splitting and multipath route is introduced to meet resource limitation and low latency. Simulation results show that the proposed mechanism can reduce FiWi network's energy consumption, improve VNE profit, and ensure high embedding accepting rate and strict delay demand of high‐priority VNs.     

Multi‐cost routing for energy and capacity constrained wireless mesh networks

We propose a class of novel energy‐efficient multi‐cost routing algorithms for wireless mesh networks, and evaluate their performance. In multi‐cost routing, a vector of cost parameters is assigned to each network link, from which the cost vectors of candidate paths are calculated using appropriate operators. In the end these parameters are combined in various optimization functions, corresponding to different routing algorithms, for selecting the optimal path. We evaluate the performance of the proposed energy‐aware multi‐cost routing algorithms under two models. In the network evacuation model, the network starts with a number of packets that have to be transmitted and an amount of energy per node, and the objective is to serve the packets in the smallest number of steps, or serve as many packets as possible before the energy is depleted. In the dynamic one‐to‐one communication model, new data packets are generated continuously and nodes are capable of recharging their energy periodically, over an infinite time horizon, and we are interested in the maximum achievable steady‐state throughput, the packet delay, and the energy consumption. Our results show that energy‐aware multi‐cost routing increases the lifetime of the network and achieves better overall network performance than other approaches. Copyright © 2011 John Wiley & Sons, Ltd.     

On energy‐efficient performance‐guaranteed channel assignment in cognitive radio‐based wireless mesh networks

In recent years, in order to make efficient use of spectrum resources, much attention has been given to solving the problem of channel assignment in cognitive radio‐based wireless mesh networks (CR‐WMNs). Current approaches focus mainly on avoiding interference in order to enhance performance in terms of throughput. WMNs are intended to provide low‐cost multimedia communication. Therefore, in order to provide low‐cost real‐time communication, channel assignment in CR‐WMNs should take into consideration not only the issue of throughput, but also energy consumption and delays. In this paper, we first define an optimization problem to maximize the end‐to‐end throughput per unit of energy consumption while minimizing, as well as guaranteeing, the delay constraint specified for a data stream. Based on this, we then propose a novel distributive heuristic channel assignment approach to solve the optimization problem in a self‐organized manner. Finally, we present the simulation results to evaluate the performance of the proposed solution in terms of end‐to‐end throughput per unit of energy consumption and delays. Copyright © 2015 John Wiley & Sons, Ltd.     

Cooperative caching for content dissemination in vehicular networks

The explosive growth of mobile data traffic has made cellular operators to seek low‐cost alternatives for cellular traffic off‐loading. In this paper, we consider a content delivery network where a vehicular communication network composed of roadside units (RSUs) is integrated into a cellular network to serve as an off‐loading platform. Each RSU subjecting to its storage capacity caches a subset of the contents of the central content server. Allocating the suitable subset of contents in each RSU cache such that maximizes the hit ratio of vehicles requests is a problem of paramount value that is targeted in this study. First, we propose a centralized solution in which, we model the cache content placement problem as a submodular maximization problem and show that it is NP‐hard. Second, we propose a distributed cooperative caching scheme, in which RSUs in an area periodically share information about their contents locally and thus update their cache. To this end, we model the distributed caching problem as a strategic resource allocation game that achieves at least 50% of the optimal solution. Finally, we evaluate our scheme using simulation for urban mobility simulator under realistic conditions. On average, the results show an improvement of 8% in the hit ratio of the proposed method compared with other well‐known cache content placement approaches.     

Design of in-network caching scheme in CCN based on grey relational analysis

In-network caching is one of the most important issues in content centric networking （CCN）, which may extremely influence the performance of the caching system. Although much work has been done for in-network caching scheme design in CCN, most of them have not addressed the multiple network attribute parameters jointly during caching algorithm design. Hence, to fill this gap, a new in-network caching based on grey relational analysis （GRA） is proposed. The authors firstly define two newly metric parameters named request influence degree （RID） and cache replacement rate, respectively. The RID indicates the importance of one node along the content delivery path from the view of the interest packets arriving The cache replacement rate is used to denote the caching load of the node. Then combining hops a request traveling from the users and the node traffic, four network attribute parameters are considered during the in-network caching algorithm design. Based on these four network parameters, a GRA based in-network caching algorithm is proposed, which can significantly improve the performance of CCN. Finally, extensive simulation based on ndnSIM is demonstrated that the GRA-based caching scheme can achieve the lower load in the source server and the less average hops than the existing the betweeness （Betw） scheme and the ALWAYS scheme.