Fabrication of a Nanofibrous Scaffold for the In Vitro Culture of Cardiac Progenitor Cells for Myocardial Regeneration

In this study, random Poly (?-caprolactone) (PCL):Poly glycolic acid (PGA) nanofibrous scaffold with various PCL:PGA compositions were fabricated by electrospinning method. The nanofibrous scaffolds were characterized by SEM, contact angle measurement, ATR-FTIR, and tensile measurements. The results showed that with the increase of the concentration of PGA in spinning blend solution, the average diameter of nanofibers, hydrophilicity, and mechanical properties of the nanofibrous scaffolds increased. An in vitro degradation study of PCL:PGA nanofibers were conducted in phosphate-buffered saline, pH 7.2. The experiments confirm that increasing of PGA provides faster degradation rate in blended nanofibers. To assay the biocompatibility and cell behavior on the nanofibrous scaffolds, cell attachment and spreading of cardiac progenitor cells seeded on the scaffolds were studied. The results indicate that among electrospun nanofibrous scaffolds, the most appropriate candidate for myocardial tissue engineering scaffolds is PCL:PGA (65:35).     

Investigating the effect of PGA on physical and mechanical properties of electrospun PCL/PGA blend nanofibers

In the field of tissue engineering there is always a need for new engineered polymeric biomaterials which have ideal properties and functional customization. Unfortunately the demands for many biomedical applications need a set of properties that no polymers can fulfill. One method to satisfy these demands and providing desirable new biomaterials is by mixing two or more polymers. In this work, random nanofibrous blends of poly (ε‐caprolactone) (PCL) and polyglycolic acid (PGA) with various PCL/PGA compositions (100/0, 80/20, 65/35, 50/50, and 0/100) were fabricated by electrospinning method and characterized for soft‐tissue engineering applications. Physical, chemical, thermal, and mechanical properties of PCL/PGA blend nanofibers were measured by scanning electron microscopy (SEM), porosimetry, contact angle measurement, water uptake, attenuated total reflectance Fourier transform‐infrared spectroscopy (ATR‐FT‐IR), X‐ray diffraction (XRD), differential scanning calorimetric (DSC), dynamic mechanical thermal analysis (DMTA), and tensile measurements. Morphological characterization showed that the addition of PGA to PCL results in an increase in the average diameter of the nanofibers. According to these results, when the amount of PGA in the blend solution increased, the hydrophilicity and water uptake of the nanofibrous scaffolds increased concurrently, approaching those of PGA nanofibers. Differential scanning calorimetric studies showed that the PCL and PGA were miscible in the nanofibrous structure and the mechanical characterization under dry conditions showed that increasing PGA content results in a tremendous increase in the mechanical properties. In conclusion, the random nanofibrous PCL/PGA scaffold used in this study constitutes a promising material for soft‐tissue engineering. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Dual drug release from CO2‐infused nanofibers via hydrophobic and hydrophilic interactions

This study investigated the effects of hydrophobic–hydrophilic interactions on dual drug release from CO₂‐infused nanofibers scaffolds (PCL, PCL–gelatin, and PCL “core” PCL–gelatin “shell”) using BODIPY 493/503 and Rhodamine B fluorescent dyes as drug models. Favorable dye–scaffold interactions increased total dye loading and promoted steady, more linear release. Unfavorable dye–scaffold interactions reduced overall loading and led to a greater burst release of dye. However, when CO₂ was used to infuse dye into an unfavorable scaffold, the changes in loading and release were less pronounced. When two dyes were infused, these behaviors were accentuated due to interactions between the dissolved forms of the dyes. Core–shell composite nanofibers displayed radically different release properties versus pure PCL–gelatin fibers when treated with dyes via CO₂ infusion. Dye release from core–shell scaffolds was highly sensitive to both interactions with scaffolds and the phase of CO₂ used to infuse the compounds of interest. By using different phases of CO₂ to partition dyes into hydrophobic and hydrophilic sections of core–shell nanofibers, such interactions can be manipulated to develop a bimodal drug release system with potential application in drug delivery or tissue engineering. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42571.     

An applicable electrospinning process for fabricating a mechanically improved nanofiber mat

Engineered polymer scaffolds play an important role in tissue engineering. An ideal scaffold should have good mechanical properties and provide a biologically functional implant site. Considering their large surface area and high porosity, nanofibers have good potential as biomimetic scaffolds. However, the main shortcomings of scaffolds consisting of nanofibers are their mechanical inability to sustain a stress environment for neotissues and shape‐ability to form a variety of shapes and sizes. In this study, we produced design‐based poly (ε‐carprolactone) (PCL) nanofiber mats using an electrospinning method with various auxiliary electrodes and an x‐y moving system. To achieve stable initial solution at a nozzle tip of the electrospinning, various types of auxiliary electrodes were introduced. To characterize the effect of the electrodes in the electric‐field distribution near the nozzle tip, we calculated the electric field concentration factor and compared it with the experimental results. The nanofiber mat produced using the moving x‐y target system demonstrated orthotropic mechanical properties due to the fiber orientation, and human dermal fibroblasts seeded on the structure tended to grow according to nanofiber orientation. POLYM. ENG. SCI., 47:707–712, 2007. © 2007 Society of Plastics Engineers.     

Conjugate electrospinning of continuous nanofiber yarn of poly(L‐lactide)/nanotricalcium phosphate nanocomposite

The continuous nanofiber yarns of poly(L ‐lactide) (PLLA)/nano‐β‐tricalcium phosphate (n‐TCP) composite are prepared from oppositely charged electrospun nanofibers by conjugate electrospinning with coupled spinnerets. The morphology and mechanical properties of PLLA/n‐TCP nanofiber yarns are characterized by scanning electron microscope, transmission electron microscope, and electronic fiber strength tester. The results show that PLLA/n‐TCP nanofibers are aligned well along the longitudinal axis of the yarn, and the concentration of PLLA plays a significant role on the diameter of the nanofibers. The thicker yarn of PLLA/n‐TCP composite with the weight ratio of 10/1 has been produced by multiple conjugate electrospinning using three pairs of spinnerets, and the yarn has tensile strength of 0.31cN/dtex. A preliminary study of cell biocompatibility suggests that PLLA/n‐TCP nanofiber yarns may be useable scaffold materials. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Fabrication of co‐continuous poly(ε‐caprolactone)/polyglycolide blend scaffolds for tissue engineering

The apparent inability of a single biomaterial to meet all the requirements for tissue engineering scaffolds has led to continual research in novel engineered biomaterials. One method to provide new materials and fine‐tune their properties is via mixing materials. In this study, a biodegradable powder blend of poly(ε‐caprolactone) (PCL), polyglycolide (PGA), and poly(ethylene oxide) (PEO) was prepared and three‐dimensional interconnected porous PCL/PGA scaffolds were fabricated by combining cryomilling and compression molding/polymer leaching techniques. The resultant porous scaffolds exhibited co‐continuous morphologies with ～50% porosity. Mean pore sizes of 24 and 56 μm were achieved by varying milling time. The scaffolds displayed high mechanical properties and water uptake, in addition to a remarkably fast degradation rate. The results demonstrate the potential of this fabrication approach to obtain PCL/PGA blend scaffolds with interconnected porosity. In general, these results provide significant insight into an approach that will lead to the development of new composites and blends in scaffold manufacturing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42471.     

Composite yarns fabricated from continuous needleless electrospun nanofibers

In this work, a spinning metal wire collector was employed to continuously collect polyacrylonitrile (PAN) nanofibers produced by a disc fiber generator and coil them around a polyethylene terephthalate (PET) yarn. The obtained composite yarns exhibited a core/shell structure (PET yarn/PAN nanofibers) with nanofibers orderly arranged on the surface of the PET yarn. The electric field analysis showed that the position of metal wire had insignificant effect on the formed electric field and high intensity electric field was formed at the disc circumferential area, which provided a constant electric field for the production of uniform nanofibers. The spinning solution, spinning speed of metal wire, and winding speed were found to play an important role in producing good quality nanofiber yarns, in terms of morphology, strength, and productivity. Pure nanofiber yarns were obtained after dissolving the core yarns in a proper solvent. This method has shown potential for the mass production of nanofiber yarns for industrial applications. POLYM. ENG. SCI., 54:1495–1502, 2014. © 2013 Society of Plastics Engineers     

Immobilization of silk fibroin on the surface of PCL nanofibrous scaffolds for tissue engineering applications

Poly(?‐caprolactone) (PCL) is explored in tissue engineering (TE) applications due to its biocompatibility, processability, and appropriate mechanical properties. However, its hydrophobic nature and lack of functional groups in its structure are major drawbacks of PCL‐based scaffolds limiting appropriate cell adhesion and proliferation. In this study, silk fibroin (SF) was immobilized on the surface of electrospun PCL nanofibers via covalent bonds in order to improve their hydrophilicity. To this end, the surface of PCL nanofibers was activated by ultraviolet (UV)–ozone irradiation followed by carboxylic functional groups immobilization on their surface by their immersion in acrylic acid under UV radiation and final immersion in SF solution. Furthermore, morphological, mechanical, contact angle, and Attenuated total reflection‐ Fourier transform infrared (ATR‐FTIR) were measured to assess the properties of the surface‐modified PCL nanofibers grafted with SF. ATR‐FTIR results confirmed the presence of SF on the surface of PCL nanofibers. Moreover, contact angle measurements of the PCL nanofibers grafted with SF showed the contact angle of zero indicating high hydrophilicity of modified nanofibers. In vitro cell culture studies using NIH 3T3 mouse fibroblasts confirmed enhanced cytocompatibility, cell adhesion, and proliferation of the SF‐treated PCL nanofibers. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46684.     

Effect of fiber structure on the properties of the electrospun hybrid membranes composed of poly(ε‐caprolactone) and gelatin

To elucidate the effect of fiber structure on the properties of the electrospun gelatin/PCL hybrid membranes, three types of fibers with different structures, i.e., core‐shell, blend, and mixed fibers were fabricated. The crystallinity, wettability, swelling degree, and mechanical properties of the hybrid membranes were compared. It was found that the crystalline characteristics of PCL in the core‐shell fibers were different from the fibers fabricated by the other two methods. That is, the orientation degree of the PCL chains in the core‐shell fibers was higher than that in both blend and mixed fibers. The wettability of the hybrid membrane was dependent on both the composition and structure of the electrospun fibers. Blended fibers exhibited the highest hydrophobicity because of the enrichment of PCL at the fiber surface. Contrarily, the mixed fibers possessed the highest mechanical strength of 3–5.18 MPa. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of fatigue loading on wicking properties of polyamide 66 nanofiber yarns

The wicking phenomenon is of prime importance with regards to biomedical applications of nanofiber yarns such as suture yarns and tissue scaffolds. In such applications, the yarns are usually subjected to cyclic tensile forces and biological tensile stresses. There is a lack of science behind the effect of fatigue on wicking properties of nanofiber yarns and this work aims at exploring this venue. Wicking properties of polyamide 66 nanofiber yarns are investigated by tracing the color change in the yarn structure resulting from pH changes during the capillary rise of distilled water. Results show that applying cyclic loading increases equilibrium wicking height in the Lucus–Washburn equation, which is attributed to changes in the overall pore structure in the cyclic loaded yarn. The likely causes of these changes are studied by scanning electron microscope, which reveals disentangled, more or less aligned and parallel nanofibers with a smaller radius in the nanofibrous structure. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47206.     

Fabrication and characterization of multiwalled carbon nanotube–loaded interconnected porous nanocomposite scaffolds

Novel nanocomposite porous scaffolds based on poly(?-caprolactone) (PCL) and multiwalled carbon nanotubes (MWCNTs) were manufactured by a compression-molding/polymer-leaching approach utilizing cryomilling for homogeneous dispersion of nanotubes and blending of polymers. Addition of MWCNTs to PCL and PCL/polyglycolide (PGA) blends resulted in significant changes to scaffold morphology compared to control samples despite persistent interconnected porosity. Several structures exhibiting rough and nanotextured surfaces were observed. Mean pore sizes were in the range of ～3–5?µm. The nanocomposites presented good mechanical and water uptake properties. The results of this research provide significant insight into a strategy for producing nanocomposite scaffolds with interconnected porosity.     

Tensile fatigue behavior of polyamide 66 nanofiber yarns

Nanofiber yarns with twisted and continuous structures have potential applications in fabrication of complicated structures such as surgical suture yarns, artificial blood vessels, and tissue scaffolds. The objective of this article is to characterize the tensile fatigue behavior of continuous Polyamide 66 (PA66) nanofiber yarns produced by electrospinning with three different twist levels. Morphology and tensile properties of yarns were obtained under static tensile loading and after fatigue loading. Results showed that tensile properties and yarn diameter were dependent on the twist level. Yarns had nonlinear time‐independent stress–strain behavior under the monotonic loading rates between 10 and 50 mm/min. Applying cyclic loading also positively affected the tensile properties of nanofiber yarns and changed their stress–strain behavior. Fatigue loading increased the crystallinity and alignment of nanofibers within the yarn structure, which could be interpreted as improved tensile strength and elastic modulus. POLYM. ENG. SCI., 55:1805–1811, 2015. © 2014 Society of Plastics Engineers     

Improving the bonding strength of laminated composites by optimizing fabric composition

Delamination is the most common failure mode in laminated composites due to the weaker strength in the through‐the‐thickness direction. Air‐jet texturing is used to produce bulk and loops in the yarn which provides more contact surface between fibers and resin. The development and characterization of core‐and‐effect textured glass yarns and the effect of texturing on the mechanical properties of laminated composites were presented in previous papers. This article describes the optimization of textured composites by varying the type and combination of constituent yarns for improving the mechanical properties. Composites with combinations of various textured yarns and non‐textured yarns were made. It was observed that the composites made from fabrics having non‐textured yarn in the warp and core‐and‐effect textured yarn in the weft had the best combination of mechanical properties. They maintained the tensile and flexure properties of composites with non‐textured yarns but had significantly higher interlaminar shear strength. POLYM. COMPOS., 2012. © 2012 Society of Plastics Engineers     

Improvement of mechanical properties of polycaprolactone scaffolds by applying piezoelectric vibration system based on a dispensing process: A new concept

The mechanical properties of biomedical scaffolds are important for applications in tissue regeneration. The dispensing system described herein, which is based on a solid free‐form fabrication technique, enables the production of design‐based scaffolds with controllable pore structures. Although current plotting systems can easily fabricate a variety of three‐dimensional scaffolds, the mechanical properties of these constructs are difficult to control because of low processing speed. To overcome this limitation, a new dispensing method, which uses a piezoelectric vibration system to improve mechanical properties, has been developed. Polycaprolactone (PCL) strands fabricated using this technique were roughly 70% stronger than normal PCL strands. To explain this increase in mechanical strength, the combined effects of the piezoelectric system and the melt‐dispensing process on the crystalline morphology and molecular orientation of PCL strands were investigated. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Mechanical and electrical properties of the PA6/SWNTs nanofiber yarn by electrospinning

In this article, continuous PA6/single‐wall nanotubes (SWNTs) nanofiber yarns were obtained by a special electrospinning method; the mechanical and electrical properties and the electric resistance‐tensile strain sensitivity of the as‐spun yarns were specially studied. The main parameters in the spinning process were systematically studied. Scanning electron microscope images and mechanical tests indicated that the optimum parameters for the electrospinning process were operation voltage = 20 kV, spinning flow rate = 0.09 ml/h, and winding speed = 150 rpm. Transmission electron microscopy images showed that the SWNTs have aligned along the axis of the nanofibers and thus formed a continuous conductive network which greatly improved the electrical conductivity of the PA6 nanofiber yarn and the percolation threshold was about 0.8 wt%. The electric conductivities of the yarns at different stretching ratios were also measured with a custom‐made fixture attached to the high‐resistance meter, and for a given carbon nanotube concentration, the conductivity changes almost linearly with the tensile strain applied on the yarns. POLYM. ENG. SCI., 54:1618–1624, 2014. © 2013 Society of Plastics Engineers     

Influence of humidity,temperature, and annealing on microstructure and tensile properties of electrospun polyacrylonitrile nanofibers

This study investigates the microstructure and mechanical properties of electrospun nanofibers from polyacrylonitrile (PAN)‐dimethylformamide (DMF) solution at different relative humidity (RH) in the range from 14% to 60% and two different temperatures (20°C and 40°C). Nanofibers produced at low RH (22% or less at 20°C) exhibit relatively smooth surface and solid core, whereas at higher RH (30% or higher at 20°C) rough surface and porous core are observed. The resulting morphology is explained by means of H₂O/DMF/PAN ternary phase diagram. At higher RH, the water diffusion into polymer‐solution jet brings thermodynamic instability into the system leading to separation of polymer‐rich phase and polymer‐lean phase, where the later contributes to porosity. Higher process temperature (40°C) yields larger miscibility area in the ternary phase diagram leading to formation of porous structure at relatively higher RH (40%). Tensile strength of nanofibrous yarns is found to vary from 80 MPa to 130 MPa depending on the processing temperature and RH. The amount of porosity is found to affect the tensile properties of nanofibers most significantly, although diameter and crystallinity play important role. Annealing is found to alleviate surface roughness and porosity and increase crystallinity. Tensile strength of nanofibrous yarns is found to improve by up to 25% after annealing. POLYM. ENG. SCI., 58:998–1009, 2018. © 2017 Society of Plastics Engineers     

Fabrication and characterization of electrospun PCL/Antheraea pernyi silk fibroin nanofibrous scaffolds

To engineer tissue restoration, it is necessary to provide a bioactive, mechanically robust scaffold. Electrospun poly(ε‐caprolactone) (PCL) nanofiber is a promising biomaterial candidate with excellent mechanical properties, but PCL scaffolds are inert and lack natural cell recognition sites. To overcome this problem we investigated the incorporation of Antheraea pernyi silk fibroin (ASF) containing inherent RGD tripeptides with PCL in electrospinning process. The mixing ratios showed remarkable impact on the properties of hybrid nanofibers. Increasing PCL content significantly enhanced the mechanical properties of nanofibers. In particular, the mechanical properties were remarkably enhanced when PCL content increased from 50 wt% to 70 wt%. Moreover, the biological assays based on endothelial cells showed promoted cell viability when ASF content reached to 30 wt%. The data demonstrated that the nanofiber containing 70% of PCL and 30% of ASF achieved the most balanced performances for integrating the mechanical properties of PCL and the bioactivity of ASF. Furthermore, biomimetic alignment of 70PCL/30ASF nanofibers was achieved, which could support PC12 neuron‐like cell growth and guide neurite outgrowth, providing a potentially useful option for the engineering of oriented tissues. The results show that the PCL/ASF hybrid nanofibers can be considered as a promising candidate for tissue engineering scaffolds. POLYM. ENG. SCI., 57:206–213, 2017. © 2016 Society of Plastics Engineers     

Fabrication and characterization of hollow nanofibrous PA6 yarn reinforced with CNTs

Core-sheath nanofibrous yarns were obtained through electrospinning of polyamide 6 (PA6) solution containing different concentrations of multi-wall carbon nanotubes (MWNTs) as sheath and PVA multifilament as the yarn core. By dissolving PVA, for obtaining conductive hollow nanofibrous PA6/MWNTs yarn, two types of porosity could be obtained including hollow central tube due to the structure of hollow yarn and nano-porous areas embedded in electrospun nanofibers. SEM results showed that the diameters of nanofibers were varying in the range of 103–145 nm obeying MWNTs concentrations and TEM results revealed that the MWNTs were embedded in nanofiber matrix as straight and aligned form. DSC analysis showed that electrospinning process caused the formation of less-ordered γ phase in nanofibers. The electrical conductivity of yarns increased from 10^?13 S m^?1 to 2.4?×?10^?6 S m^?1 with increasing the concentration of nanotubes from 0 wt.% to 7 wt.%.     

Investigation of nanoyarn preparation by modified electrospinning setup

Higher ordered structures of nanofibers, including nanofiber‐based yarns and cables, have a variety of potential applications, including wearable health monitoring systems, artificial tendons, and medical sutures. In this study, twisted assemblies of polyacrylonitrile (PAN), polyvinylidene fluoride trifluoroethylene (PVDF‐TrFe), and polycaprolactone (PCL) nanofibers were fabricated via a modified electrospinning setup, consisting of a rotating cone‐shaped copper collector, two syringe pumps, and two high voltage power supplies. The fiber diameters and twist angles varied as a function of the rotary speed of the collector. Mechanical testing of the yarns revealed that PVDF‐TrFe and PCL yarns have a higher strain‐to‐failure than PAN yarns, reaching 307% for PCL nanoyarns. For the first time, the porosity of nanofiber yarns was studied as a function of twist angle, showing that PAN nanoyarns are more porous than PCL yarns. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44813.     

Biphasic,tough composite core/shell PCL/PVA-GEL nanofibers for biomedical application

Emulsion electrospinning using natural and synthetic polymers, including two dissimilar materials is a promising technique for nanofibers fabrication in a core/shell configuration for tissue engineering, controlled or sustained drug delivery and dressing applications. In this study, we designed and fabricated core/shell nanofibers based on polycaprolactone (PCL) as core material and poly(vinyl alcohol) (PVA)-gelatin (GEL) blend as shell materials (PCL/PVA-GEL) to achieve high mechanical properties, good cell growth, and proliferation via emulsion electrospinning. The effect of water to acetic acid ratio in the solvent system (8:2, 7:3, 6:4, 5:5) and also type and concentration (3, 5, 7 w/v %) of surfactant on emulsion stability and nanofibers morphology were investigated. The emulsion containing 2% Tween80 and 1% Span60 as surfactants were selected by considering the stability of emulsion and uniform fiber morphology. In the tensile strength and elongation at break, 53 and 8% increase in the crosslinked wet state of the PCL/PVA-GEL nanofibers compared with PVA-GEL nanofibers were observed respectively. The cell culture results indicated that the PCL/PVA-GEL nanofibers surface has presented suitable interaction with fibroblast cells and cells attached and proliferated well on the fabricated substrate within 24 and 48 hours and also would be a good candidate for biomedical applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48713.