Titanium Disulfide Coated Carbon Nanotube Hybrid Electrodes Enable High Energy Density Symmetric Pseudocapacitors

While electrochemical supercapacitors often show high power density and long operation lifetimes, they are plagued by limited energy density. Pseudocapacitive materials, in contrast, operate by fast surface redox reactions and are shown to enhance energy storage of supercapacitors. Furthermore, several reported systems exhibit high capacitance but restricted electrochemical voltage windows, usually no more than 1 V in aqueous electrolytes. Here, it is demonstrated that vertically aligned carbon nanotubes (VACNTs) with uniformly coated, pseudocapacitive titanium disulfide (TiS₂) composite electrodes can extend the stable working range to over 3 V to achieve a high capacitance of 195 F g^?1 in an Li‐rich electrolyte. A symmetric cell demonstrates an energy density of 60.9 Wh kg^?1—the highest among symmetric pseudocapacitors using metal oxides, conducting polymers, 2D transition metal carbides (MXene), and other transition metal dichalcogenides. Nanostructures prepared by an atomic layer deposition/sulfurization process facilitate ion transportation and surface reactions to result in a high power density of 1250 W kg^?1 with stable operation over 10 000 cycles. A flexible solid‐state supercapacitor prepared by transferring the TiS₂–VACNT composite film onto Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.     

Tungsten Oxide@Polypyrrole Core–Shell Nanowire Arrays as Novel Negative Electrodes for Asymmetric Supercapacitors

Among active pseudocapacitive materials, polypyrrole (PPy) is a promising electrode material in electrochemical capacitors. PPy‐based materials research has thus far focused on its electrochemical performance as a positive electrode rather than as a negative electrode for asymmetric supercapacitors (ASCs). Here high‐performance electrochemical supercapacitors are designed with tungsten oxide@PPy (WO₃@PPy) core–shell nanowire arrays and Co(OH)₂ nanowires grown on carbon fibers. The WO₃@PPy core–shell nanowire electrode exhibits a high capacitance (253 mF/cm²) in negative potentials (–1.0–0.0 V). The ASCs packaged with CF‐Co(OH)₂ as a positive electrode and CF‐WO₃@PPy as a negative electrode display a high volumetric capacitance up to 2.865 F/cm³ based on volume of the device, an energy density of 1.02 mWh/cm³, and very good stability performance. These findings promote the application of PPy‐based nanostructures as advanced negative electrodes for ASCs.     

Extended Electrochemical Window of Solid Electrolytes via Heterogeneous Multilayered Structure for High‐Voltage Lithium Metal Batteries

In response to the call for safer high‐energy‐density storage systems, high‐voltage solid‐state Li metal batteries have attracted extensive attention. Therefore, solid electrolytes are required to be stable against both Li anode and high‐voltage cathodes; nevertheless, the requirements still cannot be completely satisfied. Herein, a heterogeneous multilayered solid electrolyte (HMSE) is proposed to broaden electrochemical window of solid electrolytes to 0–5 V, through different electrode/electrolyte interfaces to overcome the interfacial instability problems. Oxidation‐resistance poly(acrylonitrile) (PAN) is in contact with the cathode, while reduction tolerant polyethylene glycol diacrylate contacts with Li metal anode. A Janus and flexible PAN@Li_1.4Al_0.4Ge_1.6(PO₄)₃ (80 wt%) composite electrolyte is designed as intermediate layer to inhibit dendrite penetration and ensure compact interface. Paired with LiNi_0.6Co_0.2Mn_0.2O₂ and LiNi_0.8Co_0.1Mn_0.1O₂ cathodes, which are rarely used in solid‐state batteries, the solid‐state Li metal batteries with HMSE exhibit excellent electrochemical performance including high capacity and long cycle life. Besides, the Li||Li symmetric batteries maintain a stable polarization less than 40 mV for more than 1000 h under 2 mA cm^?2 and effective inhibition of dendrite formation. This study offers a promising approach to extend the applications of solid electrolytes for high‐voltage solid‐state Li metal batteries.     

Building Carbon‐Based Versatile Scaffolds on the Electrode Surface to Boost Capacitive Performance for Fiber Pseudocapacitors

In order to fabricate high performance fiber pseudocapacitors, the trade‐off between high mass loading and high utilization efficiency of pseudocapacitive materials should be carefully addressed. Here, a solution that is to construct a carbon‐based versatile scaffold is reported for loading pseudocapacitive materials on carbonaceous fibers. The scaffold can be easily built by conformally coating commercial pen ink on the fibers without any destruction to the fiber skeleton. Due to the high electrical conductivity and abundant macropore structure, it can provide sufficient loading room and a high ion/electron conductive network for pseudocapacitive materials. Therefore, their loading mass and utilization efficiency can be increased simultaneously, and thus the as‐designed fibrous electrode displays a high areal capacitance of 649 mF cm^?2 (or 122 mF cm^?1 based on length), which is higher than most of the reported fiber pseudocapacitors. The simple and low‐cost strategy opens up a new way to prepare high performance portable/wearable energy storage devices.     

Novel Iron Oxyhydroxide Lepidocrocite Nanosheet as Ultrahigh Power Density Anode Material for Asymmetric Supercapacitors

A simple one‐step electroplating route is proposed for the synthesis of novel iron oxyhydroxide lepidocrocite (γ‐FeOOH) nanosheet anodes with distinct layered channels, and the microstructural influence on the pseudocapacitive performance of the obtained γ‐FeOOH nanosheets is investigated via in situ X‐ray absorption spectroscopy (XAS) and electrochemical measurement. The in situ XAS results regarding charge storage mechanisms of electrodeposited γ‐FeOOH nanosheets show that a Li⁺ can reversibly insert/desert into/from the 2D channels between the [FeO₆] octahedral subunits depending on the applied potential. This process charge compensates the Fe²⁺/Fe³⁺ redox transition upon charging–discharging and thus contributes to an ideal pseudocapacitive behavior of the γ‐FeOOH electrode. Electrochemical results indicate that the γ‐FeOOH nanosheet shows the outstanding pseudocapacitive performance, which achieves the extraordinary power density of 9000 W kg^?1 with good rate performance. Most importantly, the asymmetric supercapacitors with excellent electrochemical performance are further realized by using 2D MnO₂ and γ‐FeOOH nanosheets as cathode and anode materials, respectively. The obtained device can be cycled reversibly at a maximum cell voltage of 1.85 V in a mild aqueous electrolyte, further delivering a maximum power density of 16 000 W kg^?1 at an energy density of 37.4 Wh kg^?1.     

Ti‐Based Oxide Anode Materials for Advanced Electrochemical Energy Storage: Lithium/Sodium Ion Batteries and Hybrid Pseudocapacitors

Titanium‐based oxides including TiO₂ and M‐Ti‐O compounds (M = Li, Nb, Na, etc.) family, exhibit advantageous structural dynamics (2D ion diffusion path, open and stable structure for ion accommodations) for practical applications in energy storage systems, such as lithium‐ion batteries, sodium‐ion batteries, and hybrid pseudocapacitors. Further, Ti‐based oxides show high operating voltage relative to the deposition of alkali metal, ensuring full safety by avoiding the formation of lithium and sodium dendrites. On the other hand, high working potential prevents the decomposition of electrolyte, delivering excellent rate capability through the unique pseudocapacitive kinetics. Nevertheless, the intrinsic poor electrical conductivity and reaction dynamics limit further applications in energy storage devices. Recently, various work and in‐depth understanding on the morphologies control, surface engineering, bulk‐phase doping of Ti‐based oxides, have been promoted to overcome these issues. Inspired by that, in this review, the authors summarize the fundamental issues, challenges and advances of Ti‐based oxides in the applications of advanced electrochemical energy storage. Particularly, the authors focus on the progresses on the working mechanism and device applications from lithium‐ion batteries to sodium‐ion batteries, and then the hybrid pseudocapacitors. In addition, future perspectives for fundamental research and practical applications are discussed.     

Synthesis of P‐Doped and NiCo‐Hybridized Graphene‐Based Fibers for Flexible Asymmetrical Solid‐State Micro‐Energy Storage Device

Fiber supercapacitors (FSCs) are promising energy storage devices in portable and wearable smart electronics. Currently, a major challenge for FSCs is simultaneously achieving high volumetric energy and power densities. Herein, the microscale fiber electrode is designed by using carbon fibers as substrates and capillary channels as microreactors to space‐confined hydrothermal assembling. As P‐doped graphene oxide/carbon fiber (PGO/CF) and NiCo₂O₄‐based graphene oxide/carbon fiber (NCGO/CF) electrodes are successfully prepared, their unique hybrid structures exhibit a satisfactory electrochemical performance. An all‐solid‐state PGO/CF//NCGO/CF flexible asymmetric fiber supercapacitor (AFSC) based on the PGO/CF as the negative electrode, NCGO/CF hybrid electrode as the positive electrode, and poly(vinyl alcohol)/potassium hydroxide as the electrolyte is successfully assembled. The AFSC device delivers a higher volumetric energy density of 36.77 mW h cm^?3 at a power density of 142.5 mW cm^?3. In addition, a double reference electrode system is adopted to analyze and reduce the IR drop, as well as effectively matching negative and positive electrodes, which is conducive for the optimization and improvement of energy density. For the AFSC device, its better flexibility and electrochemical properties create a promising potential for high‐performance micro‐supercapacitors. Furthermore, the introduction of the double reference electrode system provides an interesting method for the study on the electrochemical performances of two‐electrode systems.     

Cucurbit[6]uril‐Derived Sub‐4 nm Pores‐Dominated Hierarchical Porous Carbon for Supercapacitors: Operating Voltage Expansion and Pore Size Matching

The intrinsic properties of carbon‐based material and the voltage window of electrolyte are the two key barriers to restrict the energy density of carbon‐based supercapacitors (SCs). Herein, a cucurbit[6]uril‐derived nitrogen‐doped hierarchical porous carbon (CBCx) with unique pore structure characteristics is synthesized and successfully applied to construct SCs based on different electrolyte systems. Owing to narrow pore size distribution (0.5–4 nm), colossal ion‐accessible pore volume, prominent supermesopore volume, and reasonable heteroatom configuration, the CBCx‐based SCs demonstrate excellent electrochemical performances with high operating voltages in two distinct systems. The optimal SCs can output a maximum energy/power density of 18 Wh kg^?1 (11.1 Wh L^?1)/20 kW kg^?1 (12.3 kW L^?1) with an operating voltage of 1.2 V in potassium hydroxide aqueous electrolyte, as well as an ultralong cycle life of up to 50 000 cycles (0.046% decay per 100 cycles). Furthermore, the optimal SCs deliver an exceptionally high energy/power density of 95 Wh kg^?1 (58.4 Wh L^?1)/70 kW kg^?1 (43 kW L^?1) with an ultrahigh operating voltage of 3.5 V in 1‐ethyl‐3‐methylimidazolium tetrafluoroborate electrolyte. This work opens up a new application field for cucurbit[6]uril and provides an alternative avenue for optimizing the performances of carbon‐based materials for SCs.     

Aluminum‐Ion‐Intercalation Supercapacitors with Ultrahigh Areal Capacitance and Highly Enhanced Cycling Stability: Power Supply for Flexible Electrochromic Devices

Electrochemical capacitor systems based on Al ions can offer the possibilities of low cost and high safety, together with a three‐electron redox‐mechanism‐based high capacity, and thus are expected to provide a feasible solution to meet ever‐increasing energy demands. Here, highly efficient Al‐ion intercalation into W₁₈O₄₉ nanowires (W₁₈O₄₉NWs) with wide lattice spacing and layered single‐crystal structure for electrochemical storage is demonstrated. Moreover, a freestanding composite film with a hierarchical porous structure is prepared through vacuum‐assisted filtration of a mixed dispersion containing W₁₈O₄₉NWs and single‐walled carbon nanotubes. The as‐prepared composite electrode exhibits extremely high areal capacitances of 1.11–2.92 F cm^?2 and 459 F cm^?3 at 2 mA cm^?2, enhanced electrochemical stability in the Al³⁺ electrolyte, as well as excellent mechanical properties. An Al‐ion‐based, flexible, asymmetric electrochemical capacitor is assembled that displays a high volumetric energy density of 19.0 mWh cm^?3 at a high power density of 295 mW cm^?3. Finally, the Al‐ion‐based asymmetric supercapacitor is used as the power source for poly(3‐hexylthiophene)‐based electrochromic devices, demonstrating their promising capability in flexible electronic devices.     

High‐Performance 2.6 V Aqueous Asymmetric Supercapacitors based on In Situ Formed Na0.5MnO2 Nanosheet Assembled Nanowall Arrays

The voltage limit for aqueous asymmetric supercapacitors is usually 2 V, which impedes further improvement in energy density. Here, high Na content Birnessite Na_0.5MnO₂ nanosheet assembled nanowall arrays are in situ formed on carbon cloth via electrochemical oxidation. It is interesting to find that the electrode potential window for Na_0.5MnO₂ nanowall arrays can be extended to 0–1.3 V (vs Ag/AgCl) with significantly increased specific capacitance up to 366 F g^?1. The extended potential window for the Na_0.5MnO₂ electrode provides the opportunity to further increase the cell voltage of aqueous asymmetric supercapacitors beyond 2 V. To construct the asymmetric supercapacitor, carbon‐coated Fe₃O₄ nanorod arrays are synthesized as the anode and can stably work in a negative potential window of ?1.3 to 0 V (vs Ag/AgCl). For the first time, a 2.6 V aqueous asymmetric supercapacitor is demonstrated by using Na_0.5MnO₂ nanowall arrays as the cathode and carbon‐coated Fe₃O₄ nanorod arrays as the anode. In particular, the 2.6 V Na_0.5MnO₂//Fe₃O₄@C asymmetric supercapacitor exhibits a large energy density of up to 81 Wh kg^?1 as well as excellent rate capability and cycle performance, outperforming previously reported MnO₂‐based supercapacitors. This work provides new opportunities for developing high‐voltage aqueous asymmetric supercapacitors with further increased energy density.     

Intertwined Nanocarbon and Manganese Oxide Hybrid Foam for High‐Energy Supercapacitors

Rapid charging and discharging supercapacitors are promising alternative energy storage systems for applications such as portable electronics and electric vehicles. Integration of pseudocapacitive metal oxides with single‐structured materials has received a lot of attention recently due to their superior electrochemical performance. In order to realize high energy‐density supercapacitors, a simple and scalable method is developed to fabricate a graphene/MWNT/MnO₂ nanowire (GMM) hybrid nanostructured foam, via a two‐step process. The 3D few‐layer graphene/MWNT (GM) architecture is grown on foamed metal foils (nickel foam) via ambient pressure chemical vapor deposition. Hydrothermally synthesized α‐MnO₂ nanowires are conformally coated onto the GM foam by a simple bath deposition. The as‐prepared hierarchical GMM foam yields a monographical graphene foam conformally covered with an intertwined, densely packed CNT/MnO₂ nanowire nanocomposite network. Symmetrical electrochemical capacitors (ECs) based on GMM foam electrodes show an extended operational voltage window of 1.6 V in aqueous electrolyte. A superior energy density of 391.7 Wh kg^?1 is obtained for the supercapacitor based on the GMM foam, which is much higher than ECs based on GM foam only (39.72 Wh kg^?1). A high specific capacitance (1108.79 F g^?1) and power density (799.84 kW kg^?1) are also achieved. Moreover, the great capacitance retention (97.94%) after 13 000 charge–discharge cycles and high current handability demonstrate the high stability of the electrodes of the supercapacitor. These excellent performances enable the innovative 3D hierarchical GMM foam to serve as EC electrodes, resulting in energy‐storage devices with high stability and power density in neutral aqueous electrolyte.     

An Ultrafast Conducting Polymer@MXene Positive Electrode with High Volumetric Capacitance for Advanced Asymmetric Supercapacitors

Pseudocapacitors or redox capacitors that synergize the merits of batteries and double‐layer capacitors are among the most promising candidates for high‐energy and high‐power energy storage applications. 2D transition metal carbides (MXenes), an emerging family of pseudocapacitive materials with ultrahigh rate capability and volumetric capacitance, have attracted much interest in recent years. However, MXenes have only been used as negative electrodes as they are easily oxidized at positive (anodic) potential. To construct a high‐performance MXene‐based asymmetric device, a positive electrode with a compatible performance is highly desired. Herein, an ultrafast polyaniline@MXene cathode prepared by casting a homogenous polyaniline layer onto a 3D porous Ti₃C₂T_x MXene is reported, which enables the stable operation of MXene at positive potentials because of the enlarged work function after compositing with polyaniline, according to the first‐principle calculations. The resulting flexible polyaniline@MXene positive electrode demonstrates a high volumetric capacitance of 1632 F cm^?3 and an ultrahigh rate capability with 827 F cm^?3 at 5000 mV s^?1, surpassing all reported positive electrodes. An asymmetric device is further fabricated with MXene as the anode and polyaniline@MXene as the cathode, which delivers a high energy density of 50.6 Wh L^?1 and an ultrahigh power density of 127 kW L^?1.     

(Ni,Co)Se2/NiCo‐LDH Core/Shell Structural Electrode with the Cactus‐Like (Ni,Co)Se2 Core for Asymmetric Supercapacitors

Supercapacitors (SCs) have been widely studied as a class of promising energy‐storage systems for powering next‐generation E‐vehicles and wearable electronics. Fabricating hybrid‐types of electrode materials and designing smart nanoarchitectures are effective approaches to developing high‐performance SCs. Herein, first, a Ni‐Co selenide material (Ni,Co)Se₂ with special cactus‐like structure as the core, to scaffold the NiCo‐layered double hydroxides (LDHs) shell, is designed and fabricated. The cactus‐like structural (Ni,Co)Se₂ core, as a highly conductive and robust support, promotes the electron transport as well as hinders the agglomeration of LDHs. The synergistic contributions from the two types of active materials together with the superior properties of the cactus‐like nanostructure enable the (Ni,Co)Se₂/NiCo‐LDH hybrid electrode to exhibit a high capacity of ≈170 mA h g^?1 (≈1224 F g^?1), good rate performance, and long durability. The as‐assembled (Ni,Co)Se₂/NiCo‐LDH//PC (porous carbon) asymmetric supercapacitor (ASC) with an operating voltage of 1.65 V delivers a high energy density of 39 W h kg^?1 at a power density of 1650 W kg^?1. Therefore, the cactus‐like core/shell structure offers an effective pathway to engineer advanced electrodes. The assembled flexible ASC is demonstrated to effectively power electronic devices.     

Effective Suppression of Lithium Dendrite Growth Using a Flexible Single‐Ion Conducting Polymer Electrolyte

A novel single‐ion conducting polymer electrolyte (SIPE) membrane with high lithium‐ion transference number, good mechanical strength, and excellent ionic conductivity is designed and synthesized by facile coupling of lithium bis(allylmalonato) borate (LiBAMB), pentaerythritol tetrakis (2‐mercaptoacetate) (PETMP) and 3,6‐dioxa‐1,8‐octanedithiol (DODT) in an electrospun poly(vinylidienefluoride) (PVDF) supporting membrane via a one‐step photoinitiated in situ thiol–ene click reaction. The structure‐optimized LiBAMB‐PETMP‐DODT (LPD)@PVDF SIPE shows an outstanding ionic conductivity of 1.32 × 10^?3 S cm^?1 at 25 °C, together with a high lithium‐ion transference number of 0.92 and wide electrochemical window up to 6.0 V. The SIPE exhibits high tensile strength of 7.2 MPa and elongation at break of 269%. Due to these superior performances, the SIPE can suppress lithium dendrite growth, which is confirmed by galvanostatic Li plating/stripping cycling test and analysis of morphology of Li metal electrode surface after cycling test. Li|LPD@PVDF|Li symmetric cell maintains an extremely stable and low overpotential without short circuiting over the 1050 h cycle. The Li|LPD@PVDF|LiFePO₄ cell shows excellent rate capacity and outstanding cycle performance compared to cells based on a conventional liquid electrolyte (LE) with Celgard separator. The facile approach of the SIPE provides an effective and promising electrolyte for safe, long‐life, and high‐rate lithium metal batteries.     

Mechanical properties optimization of tungsten nitride thin films grown by reactive sputtering and laser ablation

Transition metal nitrides coatings are used as protective coatings against wear and corrosion. Their mechanical properties can be tailored by tuning the nitrogen content during film synthesis. The relationship between thin film preparation conditions and mechanical properties for tungsten nitride films is not as well understood as other transition metal nitrides, like titanium nitride. We report the synthesis of tungsten nitride films grown by reactive sputtering and laser ablation in the ambient of N₂ or N₂/Ar mixture at various pressures on stainless steel substrates at 400  C. The composition of the films was determined by XPS. The optimal mechanical properties were found by nanoindentation based on the determination of the proper deposition conditions. As nitrogen pressure was increased during processing, the stoichiometry and hardness changed from W₉N to W₄N and 30.8-38.7 GPa, respectively, for films deposited by reactive sputtering, and from W₆N to W₂N and 19.5-27.7 GPa, respectively, for those deposited by laser ablation.     

Nonaqueous Hybrid Lithium‐Ion and Sodium‐Ion Capacitors

Hybrid metal‐ion capacitors (MICs) (M stands for Li or Na) are designed to deliver high energy density, rapid energy delivery, and long lifespan. The devices are composed of a battery anode and a supercapacitor cathode, and thus become a tradeoff between batteries and supercapacitors. In the past two decades, tremendous efforts have been put into the search for suitable electrode materials to overcome the kinetic imbalance between the battery‐type anode and the capacitor‐type cathode. Recently, some transition‐metal compounds have been found to show pseudocapacitive characteristics in a nonaqueous electrolyte, which makes them interesting high‐rate candidates for hybrid MIC anodes. Here, the material design strategies in Li‐ion and Na‐ion capacitors are summarized, with a focus on pseudocapacitive oxide anodes (Nb₂O₅, MoO₃, etc.), which provide a new opportunity to obtain a higher power density of the hybrid devices. The application of Mxene as an anode material of MICs is also discussed. A perspective to the future research of MICs toward practical applications is proposed to close.     

Nitrogen‐Doped Carbon Encapsulated Mesoporous Vanadium Nitride Nanowires as Self‐Supported Electrodes for Flexible All‐Solid‐State Supercapacitors

Flexible 3D nanoarchitectures have received tremendous interest recently because of their potential applications in flexible/wearable energy storage devices. Herein, 3D intertwined nitrogen‐doped carbon encapsulated mesoporous vanadium nitride nanowires (MVN@NC NWs) are investigated as thin, lightweight, and self‐supported electrodes for flexible supercapacitors (SCs). The MVN NWs have abundant active sites accessible to charge storage, and the N‐doped carbon shell suppresses electrochemical dissolution of the inner MVN NWs in an alkaline electrolyte, leading to excellent capacitive properties. The flexible MVN@NC NWs film electrode delivers a high areal capacitance of 282 mF cm⁻² and exhibits excellent long‐term stability with 91.8% capacitance retention after 12 000 cycles in a KOH electrolyte. All‐solid‐state flexible SCs assembled by sandwiching two flexible MVN@NC NWs film electrodes with alkaline poly(vinyl alcohol) (PVA), sodium polyacrylate, and KOH gel electrolyte boast a high volumetric capacitance of 10.9 F cm⁻³, an energy density of 0.97 mWh cm⁻³, and a power density of 2.72 W cm⁻³ at a current density of 0.051 A cm⁻³ based on the entire cell. By virtue of the excellent mechanical flexibility, high capacitance, and large energy/power density, the self‐supported MVN@NC NWs paper‐like electrodes have large potential applications in portable and wearable flexible electronics.     

Monolithic Flexible Supercapacitors Integrated into Single Sheets of Paper and Membrane via Vapor Printing

A novel approach to fabricate supercapacitors (SCs) via vapor printing, specifically oxidative chemical vapor deposition (oCVD), is demonstrated. Compared to stacking multiple layers into a SC, this method enables the monolithic integration of all components into a single‐sheet substrate, minimizing the inactive materials and eliminating the possibility of multilayer delamination. Electrodes comprised of pseudocapacitive material, poly(3,4‐ethylenedioxythiophene) (PEDOT), are deposited into both sides of a sheet of flexible porous substrate. The film deposition and patterning are achieved in a single step. The oCVD PEDOT penetrates partially into the porous substrate from both surfaces, while leaving the interior of the substrate serving as a separator. Near the surface, the PEDOT coating conforms to the substrate's structure without blocking the pores, resembling the substrate's intrinsic morphology with high surface area. The porously structured PEDOT coating, paired with in situ ion gel electrolyte synthesis, gives enhanced electrode–electrolyte interfaces. The monolithic device demonstrates high volumetric capacitance (11.3 F cm^?3), energy density (2.98 mWh cm^?3), and power density (0.42 W cm^?3). These outstanding performance metrics are attributed to the large loading of active materials, minimization of inactive materials, and good electrode–electrolyte interfaces. SC arrays can be printed on a single substrate without the use of wire interconnects.     

3D Interdigital Au/MnO2/Au Stacked Hybrid Electrodes for On‐Chip Microsupercapacitors

On‐chip microsupercapacitors (MSCs) have application in powering microelectronic devices. Most of previous MSCs are made from carbon materials, which have high power but low energy density. In this work, 3D interdigital Au/MnO₂/Au stacked MSCs have been fabricated based on laser printed flexible templates. This vertical‐stacked electrode configuration can effectively increase the contact area between MnO₂ active layer and Au conductive layer, and thus improve the electron transport and electrolyte ion diffusion, resulting in enhanced pseudocapacitive performance of MnO₂. The stacked electrode can achieve an areal capacitance up to 11.9 mF cm^?2. Flexible and all‐solid‐state MSCs are assembled based on the sandwich hybrid electrodes and PVA/LiClO₄ gel electrolyte and show outstanding high‐rate capacity and mechanical flexibility. The laser printing technique in this work combined with the physical sputtering and electrodeposition allows fabrication of MSC array with random sizes and patterns, making them promising power sources for small‐scale flexible microelectronic energy storage systems (e.g., next‐generation smart phones).