Ionic liquid‐modified graphene/poly(vinyl alcohol) composite with enhanced properties

How to preserve the structure integrity of graphene while enhance its dispersion and compatibility in matrix attracts the attention of researchers in graphene/polymer nanocomposite field. In this paper, methacryloxyethyltrimethyl ammonium chloride (DMC), a kind of ionic liquids, was first used to non‐covalently functionalize graphene in the process of graphene oxide (GO) reduction. The as‐modified graphene (DMC‐rGO) was further incorporated into poly(vinyl alcohol) (PVA) matrix by solution casting technique to fabricate DMC‐rGO/PVA composites. The structure and properties of the obtained DMC‐rGO were investigated by X‐ray diffraction analysis (XRD), X‐ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscope (TEM), Atomic force microscopy (AFM), and Raman test. The results showed that graphene could be successfully modified by DMC through ionic–π interaction and the structure integrity of the graphene could be reserved by this non‐covalently approach. Furthermore, after co‐reduction process, some hydroxyl groups were introduced into DMC‐rGO. In virtue of these intrinsic properties of DMC‐rGO, the fabricated DMC‐rGO/PVA composites exhibit considerable enhancements in mechanical properties and remarkable improvements in thermal stability, as well as the enhancement in electrical conductivity at low DMC‐rGO loading. This simple modification approach gives a new opportunity to improve the performances of graphene/polymer composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45006.     

Preparation of well‐dispersed reduced graphene oxide and its mechanical reinforcement in polyvinyl alcohol fibre

The current work reports the preparation and characterization of polyvinyl alcohol (PVA) composite fibres reinforced with graphene reduced from graphene oxide (GO) by using oligomeric proanthocyanidin (OPC) as a reductant. After reduction, most of the oxygen‐containing groups were removed from the GO and reduced graphene oxide (rGO) was prepared. As a result of combined OPC as a dispersant, rGO could be well dispersed in a dimethyl sulfoxide/H₂O mixed solvent and in PVA matrix, and the PVA/rGO dispersion was wet spun followed by hot drawing to prepare continuous PVA/rGO composite fibres. The PVA/rGO composite fibres exhibited a significant enhancement of mechanical properties at low rGO loadings; in particular the tensile strength and Young's modulus of the 2.0 wt% rGO and PVA composite fibre increased to 244% and 294% respectively relative to neat PVA fibre. Moreover, the storage modulus (?10 °C) and T_g increased to 300% and 7.2 °C, respectively. © 2016 Society of Chemical Industry     

石墨烯/玻璃块体复合材料的制备及性能

本文报道了还原氧化石墨烯/钠钙硅(rGO/SLS)玻璃块体复合材料的热压制备和力学性能。首先以3-氨基丙基三乙氧基硅烷为表面活性剂修饰玻璃粉微粒;然后在水溶液中带负电的氧化石墨烯(GO)纳米片通过静电自组装与被氨基修饰过带正电的玻璃颗粒相结合生成复合颗粒。通过高温真空热压烧结,GO被还原成rGO,从而原位生成rGO/SLS玻璃块状复合材料。结果表明,rGO均匀分布在玻璃基质中,并明显增强了复合材料的机械性能。rGO/SLS玻璃块体复合材料中rGO的含量为0.5%(质量分数)时,复合材料的弯曲强度比纯的SLS玻璃提高了约一倍。     

Functionalized graphene‐reinforced rubber composite: Mechanical and tribological behavior study

A functionalized graphene, fluorinated graphene nanosheets (FGS), and SiO₂ nanoparticles as reinforcing fillers were employed to improve the mechanical properties of the solution styrene butadiene and butadiene rubber composites (SSBR‐BR). The results showed that the mechanical properties of SSBR‐BR composite filled with FGS were substantially improved than those of the unfilled and equivalent filler loaded graphene oxide (GO) and reduced graphene oxide (rGO) filled SSBR‐BR composites. It can be ascribed to the fact that the hydrophobic surface of FGS can be endowed the good dispersion in rubber matrix and stronger interfacial interaction between rubber and fillers. The tribological properties of these composites are also investigated. The results reveal that incorporation of GO, rGO, and FGS in SSBR‐BR composites can decrease antiwear properties because the existence of layered graphene promotes to tear and peel off. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44970.     

Conversion of pencil graphite to graphene/polypyrrole nanofiber composite electrodes and its doping effect on the supercapacitive properties

Graphene platelets were synthesized from pencil flake graphite and commercial graphite by chemical method. The chemical method involved modified Hummer's method to synthesize graphene oxide (GO) and the use of hydrazine monohydrate to reduce GO to reduced graphene oxide (rGO). rGO were further reduced using rapid microwave treatment in presence of little amount of hydrazine monohydrate to graphene platelets. Chemically modified graphene/polypyrrole (PPy) nanofiber composites were prepared by in situ anodic electropolymerization of pyrrole monomer in the presence of graphene on stainless steel substrate. The morphology, composition, and electronic structure of the composites together with PPy fibers, graphene oxide (GO), rGO, and graphene were characterized using X‐ray diffraction (XRD), laser‐Raman, and scanning electron microscopic (SEM) methods. From SEM, it was observed that chemically modified graphene formed as a uniform nanocomposite with the PPy fibers absorbed on the graphene surface and/or filled between the graphene sheets. Such uniform structure together with the observed high conductivities afforded high specific capacitance and good cycling stability during the charge–discharge process when used as supercapacitor electrodes. A specific capacitance of supercapacitor was as high as 304 F g^?1 at a current density of 2 mA cm^?1 was achieved over a PPy‐doped graphene composite. POLYM. ENG. SCI., 55:2118–2126, 2015. © 2014 Society of Plastics Engineers     

聚偏氟乙烯/石墨烯复合材料的制备及性能研究

用溶液共混法制备出聚偏氟乙烯/氧化石墨烯复合材料(PVDF/GO),经高温热压将GO还原得到聚偏氟乙烯/还原氧化石墨烯复合材料(PVDF/rGO)。研究了填料种类及含量对复合材料电学性能、热稳定性和力学性能的影响。结果表明：随GO和rGO的添加,两种复合材料的介电常数(ε _r)均变大、介电损耗(tanδ)变化不大;低含量下GO和rGO均能提高PVDF的热稳定性,但rGO对PVDF性能的改善效果更好;随填料含量从0增加到8%(质量),100 Hz下PVDF/rGO复合材料的ε _r从3.60增加到38.30,PVDF/rGO[4%(质量)]复合材料失重率为5%的分解温度较纯PVDF提高了6.44℃。rGO增强了PVDF的刚性,PVDF/rGO复合材料的拉伸强度先增大后减小,杨氏模量逐渐增大,当rGO含量为4%(质量)时拉伸强度最大,拉伸强度和弹性模量分别较纯PVDF提高了35.30%、22.58%。但GO和rGO都降低了复合材料的击穿场强。     

Graphene and graphene oxide and their uses in barrier polymers

Currently, there is great interest in graphene‐based devices and applications because graphene has unique electronic and material properties, which can lead to enhanced material performance. Graphene may be used in a wide variety of potential applications from next‐generation transistors to lightweight and high‐strength polymeric composite materials. Graphene, which has atomic thickness and two‐dimensional sizes in the tens of micrometer range or larger, has also been considered a promising nanomaterial in gas‐ or liquid‐barrier applications because perfect graphene sheets do not allow diffusion of small gases or liquids through its plane. Recent molecular simulations and experiments have demonstrated that graphene and its derivatives can be used for barrier applications. In general, graphene and its derivatives can be applied via two major routes for barrier polymer applications. One is the transfer or coating of few‐layered, ultrathin graphene and its derivatives, such as graphene oxide (GO) and reduced graphene oxide (rGO), on polymeric substrates. The other is the incorporation of fully exfoliated GO or rGO nanosheets into the polymeric matrix. In this article, we review the state‐of‐the‐art research on the use of graphene, GO, and rGO for barrier applications, including few‐layered graphene or its derivatives in coated polymeric films and polymer nanocomposites consisting of chemically exfoliated GO and rGO nanosheets, and their gas‐barrier properties. As compared to other nanomaterials being used for barrier applications, the advantages and current limitations are discussed to highlight challenging issues for future research and the potential applications of graphene/polymer, GO/polymer, and rGO/polymer composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39628.     

Preparation and characterization of reduced graphene oxide-reinforced boron carbide ceramics by self-assembly polymerization and spark plasma sintering

A self-assembly polymerization process was used to prepare graphene oxide/boron carbide (GO/B₄C) composite powders, spark plasma sintering (SPS) was used to fabricate reduced graphene oxide/boron carbide (rGO/B₄C) composites at 1800 °C and 30 MPa with a soaking time of 5 min. The effects of rGO addition on mechanical properties of the composites, such as Vickers hardness, flexural strength and fracture toughness, were investigated. The results showed that GO/B₄C composite powders were successfully self-assembled and a network structure was formed at high GO contents. The flexural strength and fracture toughness of rGO/B₄C composites were 643.64 MPa and 5.56 MPa m^1/2, respectively, at 1 and 2.5 wt.% rGO content, corresponding to an increase of 99.11% and 71.6% when compared to B₄C ceramics. Uniformly dispersed rGO in rGO/B₄C composites played an important role in improving their strength and toughness. The toughening mechanisms of rGO/B₄C composites were explained by graphene pull-out, crack deflection and bridging.     

Synthesis of manganese (IV) oxide at activated carbon on reduced graphene oxide sheets via laser irradiation technique for organic binder-free electrodes in flexible supercapacitors

We report a novel, green, scalable technique to synthesize binder-free, high-purity conductive composite comprising activated carbon (AC), manganese dioxide nanorods (MnO₂), and reduced graphene oxide sheets (rGO) for flexible supercapacitors with outstanding electrochemical performance. UV pulsed laser irradiation of GO-based composite dispersion (AC/GO or MnO₂@AC/GO) in ethanol aqueous medium was used to induce a photocatalytic reduction of GO and simultaneous anchor AC particles or AC loaded MnO₂ nanorods (MnO₂@AC) on the reduced GO sheets (rGO) at room temperature and atmospheric pressure. rGO sheets serve as a large surface area, conductive binder to enhance the ion adsorption, electrical conductivity, and mechanical flexibility of supercapacitor electrodes. This laser-induced photocatalytic reduction method was used to prepare two different rGO-based colloidal composites AC/rGO (CG) and MnO₂@AC/rGO (MCG). The prepared rGO-based colloidal composites were used to fabricate symmetric supercapacitors (CG//CG and MCG//MCG) and asymmetric supercapacitors (MCG//CG) in which MCG is the positive electrode and CG is the negative one. All prepared rGO-based supercapacitors demonstrated significant improvement in their electrochemical performance compared with rGO-free AC based supercapacitors. The enhancement in the electrochemical properties of rGO-based supercapacitors could be attributed to the intrinsic characteristics of rGO, such as high surface area, excellent electrical conductivity, and super mechanical flexibility. Our approach is a one-step, scalable, cost-effective synthesis technique to produce all binder-free AC/rGO based composites for flexible energy-storage devices.     

Thin polymer films based on poly(vinyl alcohol) containing graphene oxide and reduced graphene oxide with functional properties

In this article, the effect of the addition of graphene oxide (GO) and reduced graphene oxide (rGO) on the mechanical properties, thermal stability, and electrical conductivity of polyvinyl alcohol (PVA) has been investigated. Different weight percentages of nanofillers ranging from 0.5 to 5 wt% have been combined with PVA. The ultrasonic technique has been applied to disperse nanofillers in the PVA solution. The nanocomposite films have been prepared via solution casting technique and the dispersion of nanofillers into the PVA has been studied through optical microscopy. The microstructure, crystallization behavior, and interfacial interaction were characterized through X-ray diffraction and Fourier transform infrared spectroscopy. Differential scanning calorimetry (DSC) and thermogravimetric analysis have been applied to study the thermal properties of the prepared nanocomposites. The DSC results revealed that the crystallization temperature and melting temperature were enhanced in the presence of GO nanofiller. Besides, the tensile strength at break was improved along with the addition of GO; however, elongation at break for PVA/GO and PVA/rGO was diminished. Moreover, all specimens showed insulating behavior and the only sample was electrically conducting, which contain a high amount of rGO (5 wt%).     

Improving the mechanical properties of graphene oxide based materials by covalent attachment of polymer chains

We report on the modification of graphene oxide (GO) with poly(vinyl alcohol) (PVA) leading to the mechanical improvement of GO based materials. First, GO was covalently functionalised with PVA by esterification of carboxylic groups on GO with hydroxyl groups of PVA resulting in functionalised f-(PVA)GO. This was carried out for PVA of six different molecular weights. This functionalised graphene oxide could be formed into a paper-like material by vacuum filtration. Papers prepared from f-(PVA)GO showed significant increases in mechanical properties compared to those prepared with GO or with simple mixtures of GO and PVA. The best performance was achieved for PVA functional groups with molecular weights between 50 and 150 kg/mol. Improvements in Young’s moduli of 60% and tensile strength of 400% were observed relative to GO-only paper. The improved mechanical properties are attributed to enhanced inter-flake stress transfer due to the covalently bonded PVA. Second, functionalised f-(PVA)GO was used as filler in PVA-based composites. The application of a pre-selection method allowed the use of only the largest functionalised f-(PVA)GO flakes. This resulted in substantially reinforced PVA–f-(PVA)GO composites. Both modulus and strength increased by 40% relative to the pure polymer for f-(PVA)GO loadings below 0.3 vol.%.     

Effect of surface modification of graphene oxide on photochemical stability of poly(vinyl alcohol)/graphene oxide composites

Poly(vinyl alcohol) (PVA)/graphene oxide (GO) composites were prepared to improve the photochemical stability of PVA. The surface of GO was modified by oxyfluorination to introduce the polar functional groups on GO for the stronger interfacial interaction with PVA. The photochemical stability of PVA/oxyfluorinated-GO composites was evaluated by measuring the insoluble gel content after partial photodegradation of PVA under various UV irradiations. PVA/oxyfluorinated-GO composites showed the significant improvement in both the dispersion of GO in PVA matrix and the photochemical stability of PVA as the oxygen content increased in the oxyfluorination. The photochemical stability of composites had a close relation with the uniform distribution of GO in PVA matrix. The proper modification of GO by oxyfluorination showed the better photochemical stability for PVA/GO composites as compared to that of PVA/pristine GO composite.     

Effects of substitution for carbon black with graphene oxide or graphene on the morphology and performance of natural rubber/carbon black composites

In this study, nanosheets including graphene oxide (GO) and reduced graphene oxide (rGO), were incorporated into natural rubber (NR), to study the effects of substituting GO or rGO for carbon black (CB) on the structure and performance of NR/CB composites. The morphological observations revealed the dispersion of CB was improved by partially substituting nanosheets for CB. The improvements in static and dynamic mechanical properties were achieved at small substitution content of GO or rGO nanosheets. With substitution of rGO nanosheets, significant improvement in flex cracking resistance was achieved. NR/CB/rGO (NRG) composites has a much lower heat build‐up value compared with NR/CB/GO (NG) composites at a high load of nanosheets. However, both GO and rGO tended to aggregate at a high concentration, which led to the poor efficiency on enhancing the dynamic properties, or even deteriorate the performance of rubber composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41832.     

Mechanical,thermal conductive,and dielectric properties of fluoroelastomer/reduced graphene oxide composites in situ prepared by solvent thermal reduction

Fluoroelastomer (FKM)/reduced graphene oxide (rGO) composites are in situ prepared by solvent thermal reduction method in N,N‐dimethylformamide (DMF) solution. The reduction of graphene oxide (GO) is characterized by X‐Ray photoelectron (XPS), ultraviolet–visible (UV–vis), and Fourier transform infrared (FTIR) spectra. GO and rGO are both efficient fillers to improve the mechanical properties of FKM. The dispersibility of rGO is improved after solvent thermal reduction which is confirmed by scanning electron micrograph (SEM) and X‐ray diffraction (XRD). The homogenous suspension of FKM/rGO composites in DMF can stay stable for more than a month. The dielectric permittivity of FKM/rGO (5 phr) is 26.4 at the frequency of 10⁻¹ Hz, higher than the pure FKM (8.1). The thermal conductivity of rGO/FKM composites increases. POLYM. COMPOS., 35:1779–1785, 2014. © 2013 Society of Plastics Engineers     

Preparation of functional reduced graphene oxide and its influence on the properties of polyimide composites

Homogeneous dispersion and strong filler–matrix interfacial interactions were vital factors for graphene for enhancing the properties of polymer composites. To improve the dispersion of graphene in the polymer matrix and enhance the interfacial interactions, graphene oxide (GO), as an important precursor of graphene, was functionalized with amine‐terminated poly(ethylene glycol) (PEG–NH₂) to prepare GO–poly(ethylene glycol) (PEG). Then, GO–PEG was further reduced to prepare modified reduced graphene oxide (rGO)–PEG with N₂H₄·H₂O. The success of the modification was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, and Raman spectroscopy. Different loadings of rGO–PEG were introduced into polyimide (PI) to produce composites via in situ polymerization and a thermal reduction process. The modification of PEG–NH₂ on the surface of rGO inhibited its reaggregation and improved the filler–matrix interfacial interactions. The properties of the composites were enhanced by the incorporation of rGO–PEG. With the addition of 1.0 wt % rGO–PEG, the tensile strength of PI increased by 81.5%, and the electrical conductivity increased by eight orders of magnitude. This significant improvement was attributed to the homogeneous dispersion of rGO–PEG and its strong filler–matrix interfacial interactions. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45119.     

Preparation and properties of reduced graphene oxide/fused silica composites

An in situ strategy for fabrication of reduced graphene oxide/fused silica (rGO/FS) composites using 3-aminopropyltriethoxysilane as surfactant is reported. GO nanosheets were bound to FS particles by an electrostatic assembly between ultra thin negatively charged GO sheets and positively charged amino-modified FS particles. After spark plasma sintering, rGO/FS bulk composites have been produced from the GO and FS composite particles with GO being reduced to rGO in vacuum at high temperatures. Results show that rGO sheets were well dispersed in the matrix, and conductivity of these rGO/FS composites at room temperature was strongly dependent on the rGO nanosheet concentration. i.e., the conductivity of rGO/FS was increased to 10⁻⁴ S/cm when a conducting network was formed inside the composites. The effect of GO nanosheets on the mechanical properties of rGO/FS bulk composites was also investigated. The addition of 1 wt.% GO sheets to FS resulted in 72% increase in Vickers hardness, indicating the stress transfering from the FS matrix to the rigid rGO sheets. With the same rGO content, the fracture toughness of the as-prepared composites was increased by 74%. The main toughening mechanisms were thought to be crack deflection, crack branching, pulling-out and bridging of the rGO sheets.     

Preparation and properties of octadecylamine modified graphene oxide/styrene‐butadiene rubber composites through an improved melt compounding method

Octadecylamine modified graphene oxide/styrene‐butadiene rubber (GO‐ODA/SBR) composites are prepared by a novel and environmental‐friendly method called “Improved melt compounding”. A GO‐ODA/ethanol paste mixture is prepared firstly, and then blended with SBR by melt compounding. GO‐ODA sheets are uniformly dispersed in SBR as confirmed by scanning electron microscope, transmission electron microscopy, and X‐ray diffraction. The interfacial interaction between GO‐ODA and SBR is weaker than that between GO and SBR, which is proved by equilibrium swelling test and dynamic mechanical analysis. GO‐ODA/SBR show more pronounced “Payne effect” than GO/SBR composites, indicating enhanced filler networks resulted from the modification of GO with ODA. GO‐ODA/SBR composite has higher tensile strength and elongation at break than SBR and GO/SBR composite. The tensile strength and elongation at break for the composite with 5 parts GO‐ODA per hundred parts of rubber increase by 208% and 172% versus neat SBR, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42907.     

Mechanical and thermal properties of hierarchical composites enhanced by pristine graphene and graphene oxide nanoinclusions

Epoxy resin nanocomposites incorporated with 0.5, 1, 2, and 4 wt % pristine graphene and modified graphene oxide (GO) nanoflakes were produced and used to fabricate carbon fiber‐reinforced and glass fiber‐reinforced composite panels via vacuum‐assisted resin transfer molding process. Mechanical and thermal properties of the composite panels—called hierarchical graphene composites—were determined according to ASTM standards. It was observed that the studied properties were improved consistently by increasing the amount of nanoinclusions. Particularly, in the presence of 4 wt % GO in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 15% (21%), 34% (84%), and 40% (68%), respectively. Likewise, with inclusion of 4 wt % pristine graphene in the resin, tensile modulus, compressive strength, and flexural modulus of carbon fiber (glass fiber) composites were improved 11% (7%), 30% (77%), and 34% (58%), respectively. Also, thermal conductivity of the carbon fiber (glass fiber) composites with 4% GO inclusion was improved 52% (89%). Similarly, thermal conductivity of the carbon fiber (glass fiber) composites with 4% pristine graphene inclusion was improved 45% (80%). The reported results indicate that both pristine graphene and modified GO nanoflakes are excellent options to enhance the mechanical and thermal properties of fiber‐reinforced polymeric composites and to make them viable replacement materials for metallic parts in different industries, such as wind energy, aerospace, marine, and automotive. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40826.     

In Situ Processing of Graphene/Leucite Nanocomposite Through Graphene Oxide/Geopolymer

Graphene/leucite nanocomposites (rGO/leucite) were prepared through in situ reduction of graphene oxide/geopolymer (rGO/KGP) composites. The effects of rGO on the microstructure and mechanical properties with respect to the geopolymer matrix after the high‐temperature treatment were investigated systematically. The results show that GO is first partially reduced in the geopolymeric solution and then completely under the post high‐temperature treatment. The rGO sheets undergo no interfacial reactions with the matrix even after thermal treatment. The rGO/geopolymer composites fully transform to rGO/leucite composites after being treated at 1000°C for 30 min in an argon atmosphere. Significant improvements in mechanical properties were achieved through rGO reinforcement giving flexural strength, elastic modulus, and fracture toughness of 91.1 MPa, 60.5 GPa, and 2.04 MPa·m^1/2, increased by 120%, 8%, and 1.5%, respectively, compared with the leucite matrix alone.     

Enhancing toughness and strength of SiC ceramics with reduced graphene oxide by HP sintering

In this paper, the silicon carbide-reduced graphene oxide (SiC/rGO) composites with different content of rGO are investigated. The hot pressing (HP) at 2100?°C for 60?min under a uniaxial pressure of 40?M?Pa resulted in a near fully-dense SiC/rGO composite. In addition, the influence of graphene reinforcement on the sintering process, microstructure, and mechanical properties (fracture toughness, bending strength, and Vickers hardness) of SiC/rGO composites is discussed. The fracture toughness of SiC/rGO composites (7.9MPam^1/2) was strongly enhanced by incorporating rGO into the SiC matrix, which was 97% higher than the solid-state sintering SiC ceramics (SSiC) by HP. Meanwhile, the bending strength of the composites reached 625?M?Pa, which was 17.3% higher than the reference materials (SSiC). The microstructure of the composites revealed that SiC grains were isolated by rGO platelets, which lead to the toughening of the composite through rGO pull out/debonding and crack bridging mechanisms.