Absolute distance measurement with an optical feedback interferometer

An important use of the self-mixing effect inside a frequency-modulated single-mode laser diode is in laser velocimetry and range-finding applications. The optical beam reflected by a target and injected into the laser diode cavity modulated by a reshaped current is mixed with the light inside the cavity, causing variations of the optical output power. A theoretical analysis of this effect is proposed, based on the determination of the beat frequencies of the optical power variations, to improve the accuracy of laser distance measurement. A resolution of ?1.5 mm from 50 cm to 2 m is obtained when thermal effects are taken into account.     

Single-pulse measurement of wind velocities using an Er:Yb:glass coherent laser radar

Many wind-field mapping applications require range-resolved atmospheric velocity measurements at long range and/or with a temporal resolution sufficient to investigate turbulence. We argue that this capability can be achieved only by coherent laser radar systems that transmit energetic (>1 mJ) pulses. We describe such a system and describe single-pulse measurement of the range-resolved line-of-sight velocities, and show that the instrument-limited reproducibility of the measurements is 0.4 ms(-1).     

Diode-pumped Yb,Er:glass laser passively Q switched with a V3+:YAG crystal

Saturable-absorber Q switching of a diode-pumped erbium-doped glass laser at 1.54 microm with a V:YAG crystal has been demonstrated. An average output power of 30 mW with Q-switching efficiency of 37% and pulse duration of 350 ns have been obtained. Results of the numerical simulation of the laser have been presented.     

Angstrom-range optical path-length measurement with a high-speed scanning heterodyne optical interferometer

A highly accurate method of optical path-length measurement is introduced by use of a scanning heterodyne optical interferometer with no moving parts. The instrument has demonstrated the potential to measure optical path length at angstrom resolution over continuous thickness in the micrometer range. This optical path length can be used to calculate the thickness of any material if the refractive index is known or to measure the refractive index of the material if the thickness is known. The instrument uses a single acousto-optic device in an in-line ultra-stable reflective geometry to implement rapid scanning in the microsecond domain for thickness measurements of the test medium.     

Absolute interferometric distance measurement using a FM-demodulation technique

We propose an interferometric method for measuring absolute distances larger than the wavelength. A laser diode is used as a light source. The principle of operation is based on multiple-wavelength interferometry that uses a modulated light source. This method uses the fact that the wavelength of light emitted by the laser diode can be varied by means of the injection current. The modulation of the injection current in combination with the optical heterodyne technique causes a high-frequency phase-modulated detector signal. The phase deviation of the signal is a measure of the optical path difference in the interferometer. By FM demodulation of the detector output with a phase-locked loop demodulator, the optical path difference can be determined directly without the classical ambiguity problem of interferometry. The measuring range in the experiments was limited to 50 mm by the maximum travel range of the used specimen translation stage. Because of the inherent light sensitivity of the method described, the rangefinder can be used for three-dimensional profile measurements on a wide variety of objects, even on diffuse scattering surfaces.     

Increasing output energy from a passively Q-switched Er:glass laser

A method for increasing the output energy from newly developed passively Q-switched Er:glass eyesafe lasers is presented. The increase of energy is achieved by incorporating binary phase elements inside the laser cavities. Experimental results reveal that the output energies can be increased by more than a factor of two. Moreover, by manipulating the output phase with the binary phase elements, the peak energy density in the far field is increased by more than a factor of 4.5.     

Circularly polarized optical heterodyne interferometer for optical activity measurement of a quartz crystal

Phase retardation between two orthogonal circularly polarized light waves that propagate in an optical active medium is proportional to its optical activity. The measurement of optical activity of a quartz depolarizer in terms of the phase difference of two orthogonal circularly polarized waves is proposed. A circularly polarized optical heterodyne interferometer with a Zeeman laser to measure the optical activity of a quartz crystal is demonstrated experimentally. The accuracy of the measurement is discussed. In addition, the effect of elliptical polarization and nonorthogonality of linearly polarized light waves of a Zeeman laser on the optical activity measurement is analyzed.     

Spectra and laser properties of Er, Yb:phosphate glasses

The effects of Al₂O₃, Yb₂O₃, Er₂O₃ and OH on spectral properties of P₂O₅·Na₂O·SrO·Al₂O₃·Yb₂O₃·Er₂O₃ erbium phosphate glass were studied. 5, 8, 13 mol% Al₂O₃, 4, 5, 6, 7 and 8 mol% Yb₂O₃ and 0.05, 0.2, 0.4 mol% Er₂O₃ were used. It was found Al₂O₃ improves fluorescent lifetime of Er³⁺ ions, but the integrated absorption cross-section of Er³⁺ ions decreases with the increase of Al₂O₃ concentration. Evaluating from energy transfer efficiency of Yb³⁺ to Er³⁺ and spectral parameters of Yb³⁺ and Er³⁺, lower Al₂O₃ content, 6 mol% Yb₂O₃ and 0.2–0.4 mol% Er₂O₃ are preferred for LD pumped microchip laser application. OH groups in glass greatly affect fluorescent intensity and lifetime of Er³⁺, Yb³⁺:phosphate glass. The OH absorption coefficient at 3000 cm⁻¹ should be <1 cm⁻¹ for laser applications. Pumped with a 2 W, 974 nm InGaAs laser diode, CW laser centered at 1530 nm with slope efficiency of 10.6% and maximum output of 43 mW was achieved in our 2 mm thick Er³⁺, Yb³⁺:phosphate glass at room temperature.     

光学倍频影响激光外差干涉测量精度的机理

为了同时提高激光外差干涉测量的分辨力和精度,必须深入分析光学倍频对激光外差干涉测量精度的影响机理。在此基础上,建立了光学倍频相位测量模型,从理论上证明,光学倍频能够实现对激光外差干涉信号的细分,提高测量分辨力。光学倍频改变非线性误差的相位而使非线性误差减小,但同时改变了激光干涉多普勒频移的v/c平方项,使得残余累计误差增大。仿真结果表明,光学N倍频使非线性误差减小到原来的1/N,但使残余累计误差增大N2倍。因此,光学倍频仅适用于低速测量的场合。     

Common-path optical heterodyne profilometer: a configuration

A novel configuration that combines a linearly polarized He-Ne laser and a birefringent lens to produce a common-path polarized optical heterodyne profilometer with respect to the heterodyned P and S waves has been set up. In this profilometer a linear polarized frequency-stabilized He-Ne laser was used with an acousto-optical modulator to replace the Zeeman laser as the light source that had two polarization eigenstates in different temporal frequencies. The proposed interferometer shows a more symmetric and ideal common-path structure than the conventional optical heterodyne profilometers with the Zeeman laser. The phase error aroused by the elliptical polarization and the nonorthogonality of the two eigenpolarization modes of the Zeeman laser can be reduced. The system's resolution in the vertical direction reaches 2 A, and in a 27-mum scanning range the repeatability of the surface profile measurements is shown to be 5 A.     

Optical activity measurement by use of a balanced detector optical heterodyne interferometer

What we believe to be a novel amplitude sensitive optical heterodyne polarimeter in which a Zeeman laser is associated with balanced detector detection was set up. The aim was to measure the optical activity of a quartz crystal with a Cornu depolarizer at high accuracy. The features of this novel polarimeter, which include the use of a two-frequency laser that ensures the accuracy of the measurement, are discussed. Furthermore, the detection sensitivity of the optical activity of a quartz crystal was measured as 8.5x10(-10). To our knowledge, this is the highest sensitivity obtained for optical activity measurement of a quartz crystal when the error of the measurement is also analyzed.     

Effects of optical feedback in a birefringence-Zeeman dual frequency laser at high optical feedback levels

Optical feedback effects are studied in a birefringence-Zeeman dual frequency laser at high optical feedback levels. The intensity modulation features of the two orthogonally polarized lights are investigated in both isotropic optical feedback (IOF) and polarized optical feedback (POF). In IOF, the intensities of both beams are modulated simultaneously, and four zones, i.e., the e-light zone, the o-light and e-light zone, the o-light zone, and the no-light zone, are formed in a period corresponding to a half laser wavelength displacement of the feedback mirror. In POF, the two orthogonally polarized lights will oscillate alternately. Strong mode competition can be observed, and it affects the phase difference between the two beams greatly. The theoretical analysis is presented, which is in good agreement with the experimental results. The potential use of the experimental results is also discussed.     

Sinusoidal-wavelength-scanning interferometer with double feedback control for real-time distance measurement

In addition to a conventional phase a the interference signal of a sinusoidal-wavelength-scanning interferometer has a phase-modulation amplitude Zb that is proportional to the optical path difference L and amplitude b of the wavelength scan. L and b are controlled by a double feedback system so that the phase alpha and the amplitude Zb are kept at 3pi/2 and pi, respectively. The voltage applied to a device that displaces a reference mirror to change the optical path difference becomes a ruler with scales smaller than a wavelength. Voltage applied to a device that determines the amplitude of the wavelength scan becomes a ruler marking every wavelength. These two rulers enable one to measure an absolute distance longer than a wavelength in real time.     

Er3+/Yb3+ ions in a novel zinc borate glass: spectroscopic and physical properties

Journal of Materials Science: Materials in Electronics - Novel zinc borate glass doped with mixed rare-earth ions such as erbium (Er3+) and ytterbium (Yb3+) ions were prepared by conventional melt...     

High-accuracy measurement of 240-m distance in an optical tunnel by use of a compact femtosecond laser

A high-accuracy optical distance meter with a mode-locked femtosecond laser is proposed for distance measurements in a 310-m-long optical tunnel. We measured the phase shift of the optical beat component between longitudinal modes of a mode-locked laser. A high resolution of 50 mum at 240-m distance was obtained without cyclic error correction. The group refractive index of air is automatically extracted to an accuracy of 6 parts per million (ppm) by two-color measurement with the pulses of fundamental and second-harmonic wavelengths. Finally, an absolute mechanical distance of 240 m was obtained to within 8-ppm accuracy by use of a series of beat frequencies with the advantage of a wide range of intermode frequency, together with the results of the two-color measurement.     

The effect of In ion on the optical characteristics of Er in Er/Yb:LiNbO3 crystal

The effect of In³⁺ ion on the optical characteristics of Er³⁺ ion in Er/Yb:LiNbO₃ crystal under 980 nm excitation has been investigated. The Er and Yb contents in the crystals were measured by an inductively coupled plasma atomic emission spectrometer (ICP-AES). A significant enhancement of 1.54 μm emission was observed for Er/Yb:LiNbO₃ crystal doped with 1 mol% In₂O₃. The studies on the UV-vis absorption and the OH⁻ absorption spectra indicate that the threshold concentration of In³⁺ ion decreases with the Er/Yb doping in Er/Yb/In:LiNbO₃ crystal. The 1 mol% In₂O₃ doping results in the reduction of absorption cross section in the UV-vis region, meaning the formation of Er³⁺ cluster sites. The enhancement of 1.54 μm emission is attributed to the larger probabilities of the cross relaxation processes ⁴S_3/2 + ⁴I_15/2 → ⁴I_9/2 + ⁴I_13/2 (Er), ⁴S_3/2 + ⁴I_15/2 → ⁴I_13/2 + ⁴I_9/2 (Er) and ⁴I_9/2 + ⁴I_15/2 → ⁴I_13/2 + ⁴I_13/2 (Er) induced by Er³⁺ cluster sites.     

Multi-photon luminescence in Er/Yb:SrO⋅TiO2 glass ceramic

Er³⁺/Yb³⁺ doped strontium titanate borosilicate glass was prepared. Glass ceramic was prepared by controlled heat treatment (at 955 °C) of glass. Ti₁₀O₁₉ and Sr₃Ti₂O₇ were found as major crystalline phases. The emission spectra of glass and glass ceramic samples were investigated under 976 nm laser excitation. In glass ceramic, the intensity of the emitted radiation was much higher (≈50 times for green and ≈10 times for red emission) than in the glass. A new three photon process was found to be responsible for emission at low power which is not yet observed in Er³⁺/Yb³⁺:SrO⋅TiO₂ glass ceramic system to the best of our knowledge. The details of upconversion mechanisms e.g. Energy Transfer (ET) and Excited State Absorption (ESA) were studied by power-intensity log dependence. It is expected that Er³⁺/Yb³⁺ doped nanocrystalline (?10 nm) Sr₃Ti₂O₇ phase was responsible for the observed upconversion phenomenon in glass ceramic.     

Frequency-shifted optical feedback in a pumping laser diode dynamically amplified by a microchip laser

Compared with conventional optical heterodyne detection, laser optical feedback imaging (LOFI) allows for a several orders of magnitude higher intensity modulation contrast. The maximum contrast amplification is typically 10(3) for a diode laser in the gigahertz range and 10(6) for a microchip laser in the megahertz range. To take advantage of the wavelength tunability of a laser diode and of the lower resonant detection frequency of a microchip laser, we used LOFI modulation induced by the frequency-shifted optical feedback in a laser diode as a modulated pumping power for a microchip laser for resonant dynamic amplification. In this way, we were able to transfer the optical feedback sensitivity of the laser diode to the megahertz range. Application to telemetry is also reported.     

Precise measurement of the refractive index and optical rotatory power of a suspension by a delayed optical heterodyne technique

By using an optical heterodyne technique, we have demonstrated the detection of ballistic photons traveling through a suspension. We measured the propagation time of light in a sample with a variable optical delay line in the reference arm of an interferometer, using a superluminescent diode as a light source. The resolution and accuracy in propagation time measurement were 400 and 3 fs, respectively. The minimum detectable rotation angle of 1/10,000 deg was achieved with an integration time of 5 s. This system can measure the refractive index and optical rotatory power of the suspension in a solvent without disturbing heavy scattering from particles in the suspension, because ballistic photons are detected.