Evaluation of an air quality model for the size and composition of source-oriented particle classes

Air quality model predictions of the size and composition of atmospheric particle classes are evaluated by comparison with aerosol time-of-flight mass spectrometry (ATOFMS) measurements of single-particle size and composition at Long Beach and Riverside, CA, during September 1996. The air quality model tracks the physical diameter, chemical composition, and atmospheric concentration of thousands of representative particles from different emissions classes as they are transported from sources to receptors while undergoing atmospheric chemical reactions. In the model, each representative particle interacts with a common gas phase but otherwise evolves separately from all other particles. The model calculations yield an aerosol population, in which particles of a given size may exhibit different chemical compositions. ATOFMS data are adjusted according to the known particle detection efficiencies of the ATOFMS instruments, and model predictions are modified to simulate the chemical sensitivities and compositional detection limits of the ATOFMS instruments. This permits a direct, semiquantitative comparison between the air quality model predictions and the single-particle ATOFMS measurements to be made. The air quality model accurately predicts the fraction of atmospheric particles containing sodium, ammonium, nitrate, carbon, and mineral dust, across all particle sizes measured by ATOFMS at the Long Beach site, and in the coarse particle size range (Da > or = 1.8 microm) atthe Riverside site. Given thatthis model evaluation is very likely the most stringent test of any aerosol air quality model to date, the model predictions show impressive agreement with the single-particle ATOFMS measurements.     

Effects of meteorological conditions on aerosol composition and mixing state in Bakersfield,CA

Particle and meteorological instrumentation were used to characterize ambient atmospheric conditions, aerosol size distributions, aerosol mass concentrations, and single particle size and chemical composition in Bakersfield, CA for the period January 9, 1999 through January 28, 1999. The sampling period included four distinct meteorological periods of stagnation, clearing, haze, and rain. Particle number and mass concentrations were the highest during the stagnation episode when a heavy and extensive fog developed. Mass and number concentrations also approached these high levels during the haze period. Single particle size and composition data from an aerosol time-of-flight mass spectrometer (ATOFMS) are used to provide unique continuous information on the diversity in types of particles present, the effects of meteorology on particle size and composition, and the distribution of important chemical species within individual particles. Aerosol composition and mixing state are found to vary with meteorological conditions. Single particle data show that carbonaceous aerosol with secondary ammonium, nitrate, and sulfate dominate the aerosol concentration during a stagnation period with a dramatic composition shift occurring to sodium type particles during the haze period. The aerosol is internally mixed with respect to carbon, nitrate, sulfate, and ammonium during the stagnation period. The mixing state changes significantly over the haze period when much greater diversity in the associations of chemical species within individual particles occurs.     

Single-particle detection efficiencies of aerosol time-of-flight mass spectrometry during the North Atlantic marine boundary layer experiment

During the North Atlantic marine boundary layer experiment (NAMBLEX) sampling campaign at Mace Head, Ireland, both continental and maritime air masses were sampled. Aerosol was characterized both with a TSI 3800 time-of-flight mass spectrometer (ATOFMS) and a MOUDI microorifice impactor, and particle number counts were measured independently with an aerodynamic particle sizer. The data have been analyzed in order to elucidate factors determining the particle detection efficiencies of the ATOFMS. These are broken down according to the efficiency of the inlet system, the hit efficiency on particles which enter the sensing zone of the instrument and the sensitivity of the measured ion signal to the chemical species. A substantial matrix effect depending on the chemical composition of the aerosol sampled at the time was found, which is reflected in variations in the hit efficiency of particles entering the sensing zone of the instrument with the main desorption-ionization laser. This is in addition to the strong inverse power-law dependence of inlet transmission efficiency on particle diameter. The variation in hit efficiency with particle type is likely attributable to differences in the energetics of laser energy absorption, ablation, and ion formation. However, once variations in both inlet transmission and hit efficiencies are taken into account, no additional matrix dependence of ATOFMS response is required to obtain a linear relationship between the ion signal and the concentration of a particular chemical species. The observations show that a constant mass of material is ionized from each particle, irrespective of size. Consequently the integrated ion signal for a given chemical component and particle size class needs to be increased by a factor related to the cube of particle diameter in order to correlate with the airborne mass of that component.     

Measurements of isoprene-derived organosulfates in ambient aerosols by aerosol time-of-flight mass spectrometry - part 1: single particle atmospheric observations in Atlanta

Organosulfate species have recently been identified as a potentially significant class of secondary organic aerosol (SOA) species, yet little is known about their behavior in the atmosphere. In this work, organosulfates were observed in individual ambient aerosols using single particle mass spectrometry in Atlanta, GA during the 2002 Aerosol Nucleation and Characterization Experiment (ANARChE) and the 2008 August Mini-Intensive Gas and Aerosol Study (AMIGAS). Organosulfates derived from biogenically produced isoprene were detected as deprotonated molecular ions in negative-ion spectra measured by aerosol time-of-flight mass spectrometry; comparison to high-resolution mass spectrometry data obtained from filter samples corroborated the peak assignments. The size-resolved chemical composition measurements revealed that organosulfate species were mostly detected in submicrometer aerosols and across a range of aerosols from different sources, consistent with secondary reaction products. Detection of organosulfates in a large fraction of negative-ion ambient spectra - ca. 90-95% during ANARChE and ~65% of submicrometer particles in AMIGAS - highlights the ubiquity of organosulfate species in the ambient aerosols of biogenically influenced urban environments.     

Source apportionment of fine particulate matter by clustering single-particle data: tests of receptor model accuracy

The source apportionment accuracy of a neural network algorithm (ART-2a) is tested on the basis of its application to synthetic single-particle data generated by a source-oriented aerosol processes trajectory model that simulates particle emission, transport, and chemical reactions in the atmosphere. ART-2a successfully groups particles from the majority of sources actually present, when given complete data on ambient particle composition at monitoring sites located near the emission sources. As particles age in the atmosphere, accumulation of gas-to-particle conversion products can act to disguise the source of the primary core of the particles. When ART-2a is applied to synthetic single-particle data that are modified to simulate the biases in aerosol time-of-flight mass spectrometry (ATOFMS) measurements, best results are obtained using the ATOFMS dual ion operating mode that simultaneously yields both positive and negative ion mass spectra. The results of this study suggest that the use of continuous single-particle measurements coupled with neural network algorithms can significantly improve the time resolution of particulate matter source apportionment.     

Mass spectrometry of individual particles between 50 and 750 nm in diameter at the Baltimore Supersite

The performance of the real-time single-particle mass spectrometer RSMS III is evaluated for ambient fine and ultrafine particle number concentration measurements. The RSMS III couples aerodynamic size selection with laser ablation time-of-flight mass spectrometry for single-particle analysis. It was deployed at the Baltimore particulate matter Supersite for semi-continuous operation over an 8-month period. The sampling protocol adopted for this study permitted the analysis of on average 2000 particles per day. The number of particles analyzed is a tradeoff between generating a statistically significant data set and maintaining instrument operation over a long period of time. The optimum particle size range of analysis was found to be ca. 50-770 nm in diameter, although particles as small as 45 nm and as large as 1250 nm were also analyzed. While nitrate, sulfate, and carbon (elemental and organic) were found to dominate the ambient aerosol, over 10% of the detected particles contained transition and/or heavy metals. The (size-dependent) detection efficiency, defined as the fraction of particles entering the inlet that are analyzed, was determined by comparison with scanning mobility particle sizing data. Using the experimentally determined detection efficiencies, particle number concentrations of specific chemical components were estimated. While the sampling protocol allowed the particle concentrations of major chemical components to be followed as a function of both time and particle size, minor components required averaging over time and/or size to achieve adequate precision.     

New real-time technique to measure the size distribution of water-insoluble aerosols

To date, there has been much research into the size distribution of ambient atmospheric aerosols, particularly either the total aerosol population or water-soluble ionic species such as sulfate or nitrate. Meanwhile, there have been virtually no size-resolved measurements of water-insoluble aerosols (WIA). This has been due to a lack of practical measurement technology rather than a reflection of the importance of WIA to climate and health. Particle solubility influences the planetary radiation balance both directly and indirectly: solubility influences both the amount of hygroscopic growth (and thus light scattering) that occurs as a function of relative humidity and the ability of particles to serve as cloud condensation nuclei (and thus the lifetime and albedo of clouds). Also, recent information suggests that WIA may be harmful to human health. To address these concerns, a new real-time technique has been developed to measure the size-resolved concentration of WIA. This technique involves the entrainment of particles into a liquid stream and measurement of the WIA size distribution using a liquid optical particle counter. The time resolution of this instrumentation is approximately 4 min (depending on flow rate) and is capable of sizing and counting insoluble particles with diameters of 0.25-2.0 microm at atmospheric concentrations as low as 0.1 cm(-3). Laboratory characterization using polystyrene latex spheres shows agreement within +/-5% of the liquid stream and air stream particle concentrations when adjusted for flow rate. The instrumentation was field-tested at a rural site on the edge of the metro-Atlanta urban area. During this test, the WIA concentration averaged 5% of the total particle concentration between 0.25 and 2.0 microm but reached as high as 35%.     

Physiochemical properties of alkylaminium sulfates: hygroscopicity, thermostability, and density

Although heterogeneous interaction of amines has been recently shown to play an important role in the formation and growth of atmospheric aerosols, little information is available on the physicochemical properties of aminium sulfates. In this study, the hygroscopicity, thermostability, and density of alkylaminium sulfates (AASs) have been measured by an integrated aerosol analytical system including a tandem differential mobility analyzer and an aerosol particle mass analyzer. AAS aerosols exhibit monotonic size growth at increasing RH without a well-defined deliquescence point. Mixing of ammonium sulfate (AS) with AASs lowers the deliquescence point corresponding to AS. Particles with AASs show comparable or higher thermostability than that of AS. The density of AASs is determined to be 1.2-1.5 g cm(-3), and an empirical model is developed to predict the density of AASs on the basis of the mole ratio of alkyl carbons to total sulfate. Our results reveal that the heterogeneous uptake of amines on sulfate particles may considerably alter the aerosol properties. In particular, the displacement reaction of alkylamines with ammonium sulfate aerosols leads to a transition from the crystalline to an amorphorous phase and an improved water uptake, considerably enhancing their direct and indirect climate forcing.     

Hygroscopic and Chemical Properties of Aerosols Collected near a Copper Smelter: Implications for Public and Environmental Health

Particulate matter emissions near active copper smelters and mine tailings in the southwestern United States pose a potential threat to nearby environments owing to toxic species that can be inhaled and deposited in various regions of the body depending on the composition and size of the particles, which are linked by particle hygroscopic properties. This study reports the first simultaneous measurements of size-resolved chemical and hygroscopic properties of particles next to an active copper smelter and mine tailings by the towns of Hayden and Winkelman in southern Arizona. Size-resolved particulate matter samples were examined with inductively coupled plasma mass spectrometry, ion chromatography, and a humidified tandem differential mobility analyzer. Aerosol particles collected at the measurement site are enriched in metals and metalloids (e.g., arsenic, lead, and cadmium) and water-uptake measurements of aqueous extracts of collected samples indicate that the particle diameter range of particles most enriched with these species (0.18-0.55 μm) overlaps with the most hygroscopic mode at a relative humidity of 90% (0.10-0.32 μm). These measurements have implications for public health, microphysical effects of aerosols, and regional impacts owing to the transport and deposition of contaminated aerosol particles.     

Formation of aerosol particles from reactions of secondary and tertiary alkylamines: characterization by aerosol time-of-flight mass spectrometry

In ambient field studies conducted with aerosol time-of-flight mass spectrometry (ATOFMS), individual particle mass spectra commonly contain ion peaks at mass/charge (m/z) 86, 101, 102, and 118. Particles with mass spectra containing these peaks show a strong correlation with high relative humidity and low temperatures. In an effort to identify these peaks, a series of smog chamber studies were conducted probing the chemistry of secondary and tertiary alkylamines. Specifically, in separate studies, trimethylamine, di- and triethylamine, and di- and tripropylamine were reacted in a 1 m3 Teflon outdoor smog chamber with naturally occurring levels of gas phase oxidants in ambient air. The aerodynamic sizes and individual mass spectra of the resulting aerosol particles were acquired continuously using aerosol time-of-flight mass spectrometry (ATOFMS). Both oxidation and acid-base reactions between amines and acids commonly present in the atmosphere (i.e., nitric and sulfuric acid) appear to play roles in the formation and chemistry of organic nitrogen-containing particle phase species. Ion peaks in the individual particle mass spectra indicate the presence of alkyl ammonium salts, as well as other tentatively identified organic N-containing compounds formed by oxidation processes. Also, for the first time, tertiary alkylamine-N-oxides have been identified as alkylamine oxidation products in the aerosol particle phase. Smog chamber reactions involving triethylamine produce ATOFMS mass spectra with similar ion peak combinations as those observed in the spectra of particles commonly detected in ambient and vehicular source characterization studies. The results of this study suggest that amine chemistry involving gas-to-particle conversion and photooxidation processes may play a significant role in particle formation in regions with high amine concentrations.     

Direct evidence of atmospheric secondary organic aerosol formation in forest atmosphere through heteromolecular nucleation

Atmospheric aerosols play a central role in climate and atmospheric chemistry. Organic matter frequently composes aerosol major fraction over continental areas. Reactions of natural volatile organic compounds, with atmospheric oxidants, are a key formation pathway of fine particles. The gas and particle atmospheric concentration of organic compounds directly emitted from conifer leaf epicuticular wax and of those formed through the photooxidation of alpha- and beta-pinene were simultaneously collected and measured in a conifer forest by using elaborated sampling and GC/ MS techniques. The saturation concentrations of acidic and carbonyl photooxidation products were estimated, by taking into consideration primary gas- and particle-phase organic species. Primary organic aerosol components represented an important fraction of the atmospheric gas-phase organic content Consequently, saturation concentrations of photooxidation products have been lowered facilitating new particle formation between molecules of photooxidation products and semi-volatile organic compounds. From the measured concentrations of the above-mentioned compounds, saturation concentrations (Csat,i) of alpha- and beta-pinene photooxidation products were calculated for nonideal conditions using a previously developed absorptive model. The results of these calculations indicated that primarily emitted organic species and ambient temperature play a crucial role in secondary organic aerosol formation.     

Seasonal and diurnal variation of PM2.5 apparent particle density in urban air in Augsburg, Germany

The apparent particle density of particulate matter with aerodynamic diameter < 2.5 microm (rho2.5) was determined at an urban site in Augsburg, Germany and its correlation with chemical composition and meteorological conditions was investigated. rho2.5 showed strong day-to-day variation from 1.05 to 2.36 g cm(-3) (5 to 95% percentile), and nearly 64% of the daily variability could be explained by a multiple variable regression model. A minimum in the morning and afternoon (about 1.5 g cm(-3)), and a maximum (near 1.8 g cm(-3)) during midday was observed. The minima represent fresh primary aerosol emissions, which were related to traffic soot particles with low density due to their agglomerate structure, especially observed in the early morning hours of weekdays. The maximum is likely due to increased secondary particle production and the presence of more aged particles with the built-up of the convectively mixed boundary layer. rho2.5 has the potential to serve as a crude tracer for chemical composition and atmospheric processing and might play an important role when considering the associations between health effects and ambient particles.     

Depression of ammonia uptake to sulfuric acid aerosols by competing uptake of ambient organic gases

The neutralization of acidic aerosols by ammonia has been studied through experiments which combine ambient air with laboratory generated sulfuric acid aerosol. Results indicated that acidic aerosol mixed with organic free air and ammonia was neutralized on a time scale<1 min, consistent with expectations. However, in the presence of ambient organic gases and ammonia, the rate of aerosol neutralization is significantly reduced. This reduction in ammonia uptake was concurrent with an increase in the amount of particle phase organics. A steady state in the NH4+/SO4(2-) in the presence of organic gases was established on time scales of 10 min to several hours, corresponding to NH3 uptake coefficients in the range of 4×10(-3)-2×10(-4). The degree to which neutralization was slowed was dependent upon the initial ammonia concentration and the organic mass added to the aerosols. These results suggest that inorganic equilibrium thermodynamic models may overestimate the rate of ammonia uptake and that ambient particles may remain acidic for longer than previously expected.     

Determination of single particle mass spectral signatures from light-duty vehicle emissions

In this study, 28 light-duty gasoline vehicles (LDV) were operated on a chassis dynamometer at the California Air Resources Board Haagen-Smit Facility in El Monte, CA. The mass spectra of individual particles emitted from these vehicles were measured using aerosol time-of-flight mass spectrometry (ATOFMS). A primary goal of this study involves determining representative size-resolved single particle mass spectral signatures that can be used in future ambient particulate matter source apportionment studies. Different cycles were used to simulate urban driving conditions including the federal testing procedure (FTP), unified cycle (UC), and the correction cycle (CC). The vehicles were selected to span a range of catalytic converter (three-way, oxidation, and no catalysts) and engine technologies (vehicles models from 1953 to 2003). Exhaust particles were sampled directly from a dilution and residence chamber system using particle sizing instruments and an ATOFMS equipped with an aerodynamic lens (UF-ATOFMS) analyzing particles between 50 and 300 nm. On the basis of chemical composition, 10 unique chemical types describe the majority of the particles with distinct size and temporal characteristics. In the ultrafine size range (between 50 and 100 nm), three elemental carbon (EC) particle types dominated, all showing distinct EC signatures combined with Ca, phosphate, sulfate, and a lower abundance of organic carbon (OC). The relative fraction of EC particle types decreased as particle size increased with OC particles becoming more prevalent above 100 nm. Depending on the vehicle and cycle, several distinct OC particle types produced distinct ion patterns, including substituted aromatic compounds and polycyclic aromatic hydrocarbons (PAH), coupled with other chemical species including ammonium, EC, nitrate, sulfate, phosphate, V, and Ca. The most likely source of the Ca and phosphate in the particles is attributed to the lubricating oil. Significant variability was observed in the chemical composition of particles emitted within the different car categories as well as for the same car operating under different driving conditions. Two-minute temporal resolution measurements provide information on the chemical classes as they evolved during the FTP cycle. The first two minutes of the cold start produced more than 5 times the number of particles than any other portion of the cycle, with one class of ultrafine particles (EC coupled with Ca, OC, and phosphate) preferentially produced. By number, the three EC with Ca classes (which also contained OC, phosphate, and sulfate) were the most abundant classes produced by the nonsmoking vehicles. The smoker category produced the highest number of particles, with the dominant classes being OC comprised of substituted monoaromatic compounds and PAHs, coupled with Ca and phosphate, thus suggesting used lubricating oil was associated with many of these particles. These studies show, by number, EC particles dominate gasoline emissions in the ultrafine size range particularlyforthe lowest emitting newer vehicles, suggesting the EC signature alone cannot be used as a unique tracer for diesels. This represents the first report of high time- and size-resolved chemical composition data showing the mixing state of nonrefractory elements in particles such as EC for vehicle emissions during dynamometer source testing.     

Emission rates and characterization of aerosols produced during the spreading of dewatered class B biosolids

This study measured aerosol emission rates produced during the spreading of dewatered class B biosolids onto agricultural land. Rates were determined in multiple independent experimental runs by characterizing both the source aerosol plume geometry and aerosol concentrations of PM10, total bacteria, heterotrophic plate count bacteria (HPC), two types of biosolids indicator bacteria, endotoxin, and airborne biosolids regulated metals. These components were also measured in the bulk biosolids to allow for correlating bulk biosolids concentrations with aerosol emission rates and to produce reconstructed aerosol concentrations. The average emission rates and associated standard deviation for biosolids PM10, total bacteria, HPC, total coliforms, sulfite-reducing Clostridia, endotoxin, and total biosolids regulated metals were 10.1 +/- 8.0 (mg/s), 1.98 +/- 1.41 x 10(9) (no./s), 9.0 +/- 11.2 x 10(7) (CFU/s), 4.9 +/- 2.2 x 10(3) (CFU/ s), 6.8 +/- 3.8 x 10(3) (CFU/s), 2.1 +/- 1.8 x 10(4) (EU/s), and 36.9 +/- 31.8 (microg/s) respectively. Based on the land application rates of spreaders used in this study, an estimated 7.6 +/- 6.3 mg of biosolids were aerosolized for every 1 kg (dry weight) applied to land. Scanning electron microscopy particle size distribution analysis of the aerosols revealed that greater than 99% of the emitted particles were less than 10 microm and particle size distributions had geometric mean diameters and standard deviations near 1.1 +/- 0.97 microm. The demonstrated correlations of bulk biosolids concentrations with aerosol emission rates, and the reconstruction of aerosol concentration based on PM10 and bulk biosolids concentration provide a more fundamental, bulk biosolids-based approach for extending biosolids aerosol exposure assessment to different land application scenarios and a broader range of toxins and pathogens.     

Fast determination of the relative elemental and organic carbon content of aerosol samples by on-line single-particle aerosol time-of-flight mass spectrometry

Different particulate matter (PM) samples were investigated by on-line single-particle aerosol time-of-flight mass spectrometry (ATOFMS). The samples consist of soot particulates made by a diffusion flame soot generator (combustion aerosol standard, CAST), industrially produced soot material (printex), soot from a diesel passenger car as well as ambient particulates (urban dust (NIST) and road tunnel dust). Five different CAST soot particle samples were generated with different elemental carbon (EC) and organic carbon (OC) content. The samples were reaerosolized and on-line analyzed by ATOFMS, as well as precipitated on quartz filters for conventional EC/OC analysis. For each sample ca. 1000 ATOFMS single-particle mass spectra were recorded and averaged. A typical averaged soot ATOFMS mass spectrum shows characteristic carbon cluster peak progressions (Cn+) as well as hydrogen-poor carbon cluster peaks (CnH(1-3)+). These peaks are originated predominately from the elemental carbon (EC) content of the particles. Often additional peaks, which are not due to carbon clusters, are observed, which either are originated from organic compounds (OC-organic carbon), or from the non-carbonaceous inorganic content of the particles. By classification of the mass spectral peaks as elemental carbon (i.e., the carbon cluster progression peaks) or as peaks originated from organic compounds (i.e., molecular and fragment ions), the relative abundance of elemental (EC) and organic carbon (OC) can be determined. The dimensionless TC/EC values, i.e., the ratio of total carbon content (TC, TC = OC + EC) to elemental carbon (EC), were derived from the ATOFMS single-particle aerosol mass spectrometry data. The EC/TC values measured by ATOFMS were compared with the TC/EC values determined by the thermal standard techniques (thermooptical and thermocoulometric method). A good agreement between the EC/TC values obtained by on-line ATOFMS and the offline standard method was found.     

Estimation of size-resolved ambient particle density based on the measurement of aerosol number, mass, and chemical size distributions in the winter in beijing

Simultaneous measurements of aerosol size, distribution of number, mass, and chemical compositions were conducted in the winter of 2007 in Beijing using a Twin Differential Mobility Particle Sizer and a Micro Orifice Uniform Deposit Impactor. Both material density and effective density of ambient particles were estimated to be 1.61 ± 0.13 g cm(-3) and 1.62 ± 0.38 g cm(-3) for PM(1.8) and 1.73 ± 0.14 g cm(-3) and 1.67 ± 0.37 g cm(-3) for PM(10). Effective density decreased in the nighttime, indicating the primary particles emission from coal burning influenced the density of ambient particles. Size-resolved material density and effective density showed that both values increased with diameter from about 1.5 g cm(-3) at the size of 0.1 μm to above 2.0 g cm(-3) in the coarse mode. Material density was significantly higher for particles between 0.56 and 1.8 μm during clean episodes. Dynamic Shape Factors varied within the range of 0.95-1.13 and decreased with particle size, indicating that coagulation and atmospheric aging processes may change the shape of particles.     

Sampling atmospheric carbonaceous aerosols using an integrated organic gas and particle sampler

Measurement of particle-bound organic carbon (OC) may be complicated by sampling artifacts such as adsorption of gas-phase species onto particles or filters or evaporation of semivolatile compounds off the particles. A denuder-based integrated organic gas and particle sampler (IOGAPS), specifically designed to minimize sampling artifacts, has been developed to sample atmospheric carbonaceous aerosols. IOGAPS is designed to first remove gas-phase chemicals via sorption to the XAD-coated denuder, and subsequently particles are trapped on a quartz filter. A backup sorbent system consisting of sorbent- (XAD-4 resin) impregnated filters (SIFs) was used to capture the semivolatile OC that evaporates from the particles accumulated on the upstream quartz filter. A traditional filter pack (FP) air sampler, which uses a single quartz filter to collect the particles, was employed for comparison in this study. Elemental and organic carbon were determined from filter punches by a thermal optical transmittance aerosol carbon analyzer. Field measurements show that there was no significant difference between the elemental carbon concentrations determined by the FP and IOGAPS, indicating that particle loss during the transit through the denuder tube was negligible. Compared with the OC determined by FP (3.9-12.6 microg of C/m3), the lower OC observed on the quartz filter in the IOGAPS (2.2-6.0 microg of C/m3) was expected because of the removal of gas-phase organics by the denuder. Higher semivolatile organic carbon (SVOC) on the backup SIFs during the night (1.24-8.43 microg of C/m3) suggests that more SVOC, emitted from primary sources or formed as secondary organic compounds, partitions onto the particles during the night because of the decreased ambient temperature. These data illustrate the utility of an IOGAPS system to more accurately determine the particle-bound OC in comparison to FP-based systems.     

Mobile laboratory with rapid response instruments for real-time measurements of urban and regional trace gas and particulate distributions and emission source characteristics

Recent technological advances have allowed the development of robust, relatively compact, low power, rapid response (approximately 1 s) instruments with sufficient sensitivity and specificity to quantify many trace gases and aerosol particle components in the ambient atmosphere. Suites of such instruments can be deployed on mobile platforms to study atmospheric processes, map concentration distributions of atmospheric pollutants, and determine the composition and intensities of emission sources. A mobile laboratory containing innovative tunable infrared laser differential absorption spectroscopy (TILDAS) instruments to measure selected trace gas concentrations at sub parts-per-billion levels and an aerosol mass spectrometer (AMS) to measure size resolved distributions of the nonrefractory chemical components of fine airborne particles as well as selected commercial fast response instruments and position/velocity sensors is described. Examples of the range of measurement strategies that can be undertaken using this mobile laboratory are discussed, and samples of measurement data are presented.