Bidirectional and simultaneous transmission of baseband and wireless signals over RSOA based WDM radio-over-fiber passive optical network using incoherent light injection technique

Reflective semiconductor optical amplifier (RSOA) based wavelength division multiplexed radio-over-fiber passive optical network (WDM−RoF−PON) has been proposed and demonstrated, to transmit 2.5 Gbps baseband (BB) and 1.25 Gbps wireless data in downstream and 1 Gbps BB data signal in upstream over 25-km single-mode fiber (SMF), and wireless downstream signal over 25-km SMF as well as 5.2 m free space in air. In the downstream, 2.5 Gbps BB data and 1.25 Gbps wireless data are modulated using single-electrode Mach–Zehnder modulator (SD-MZM) based on double-sideband with optical carrier suppression (DSBCS) scheme and simultaneously transmitted by incoherent light injection technique and employing fiber Bragg grating (FBG) at the base station. RSOA is utilized at the user end to reuse the carrier for uplink transmission. High receiver sensitivity, low bit-error-rate (BER) and excellent eye-diagram, eye height are achieved in our proposed network system and the results affirm the acceptability of proposed RSOA based WDM−RoF−PON.     

Colorless ONU implementation for WDM-PON using direct-detection optical OFDM

A novel architecture for the colorless optical network unit (ONU) is proposed and experimentally demonstrated with direct-detection optical orthogonal frequency division multiplexing (DDO-OFDM). In this architecture, polarization-division multiplexing is used to reduce the cost at ONU. In optical line terminal (OLT), quadrature amplitude modulation (QAM) intensity-modulated OFDM signal with x-polarization at 10 Gbit/s is transmitted as downstream. At each ONU, the optical OFDM signal is demodulated with direct detection, and y-polarization signal is modulated for upstream on-off keying (OOK) data at 5 Gbit/s. Simulation results show that the power penalty is negligible for both optical OFDM downstream and the on-off keying upstream signals after over 50 km single-mode fiber (SMF) transmission.     

Optically Powered Remote Units for Radio-Over-Fiber Systems

Optically powered radio-over-fiber remote units have been designed and constructed for distributed antenna system applications using separate fibers for power and signal transmission. The feasibility of this approach has been investigated through a series of transmission measurements, based on the IEEE 802.11g wireless local area networking standard at a frequency of 2.5 GHz using 64-QAM OFDM modulation at 54 Mb/s. These measurements show that high-quality multilevel signal transmission is possible with modest levels of optical power at the central unit. For example, an EVM of around 3% has been achieved for an RF output power of 0 dBm using a central unit optical power of 250 mW over a link length of 300 m.      

Experimental evaluation of the BER performance in optical OFDM system based on discrete Hartley transform precoding

We experimentally assess the bit error rate （BER） performance of an intensity modulation/direct detection （IM/DD） optical orthogonal frequency division multiplexing （OFDM） system based on discrete Hartley transform （DHT） precoding in single-mode fiber （SMF） link for 2.5 Gbit/s quadrature phase shift keying （QPSK） OFDM symbol rate. The experimental results show that for the optical OFDM system based on DHT-precoding, the receiver sensitivity at the BER of 10-4 after 100 km SMF transmission is about 1.5 dBm better than that of the original QPSK OFDM signal, and the DHT-precoded OFDM QPSK signal can achieve approximately 1.3 dB of peak-to-average power ratio （PAPR） reduction.     

A Novel Scheme for Seamless Integration of ROF With Centralized Lightwave OFDM-WDM-PON System

We have experimentally demonstrated a novel transmission system for seamless integration of ROF with centralized lightwave OFDM-WDM-PON based on an integrated external modulator. At the one of two arms of the integrated external modulator, the optical carrier suppression (OCS) is realized to generate 40–GHz optical millimeter-wave (mm-wave) and up-converted baseband data signal as wireless signal. In another arm of the integrated external modulator, 16 quadrature amplitude modulation intensity-modulated OFDM signals at 10 Gbit/s are used for downstream transmission as wired signal based on double sideband modulation. By using one intensity modulator (IM), the downstream RF OFDM signal is remodulated for upstream on–off keying (OOK) data at 2.5 Gbit/s because of its downstream RZ shape waveform. The 10-Gbit/s wired signal, 2.5-Gbit/s wireless signal, and 2.5-Gbit/s upstream signal have been transmitted over 20-km single mode fiber (SMF) successfully.      

Complexity reduction of equalization/pre-emphasis using set membership filtering for NG LR-PON

Coherent receivers, with advanced and low-complexity digital signal processing (DSP), have the advantage of increasing the loss/power budget of next generation-long-reach passive optical networks (NG-LRPONs). This reduces the network capital expenditures by eliminating or reducing the number of amplifiers to be installed between the optical line terminal (OLT) and the optical network units (ONUs). In this paper, we investigate the complexity and convergence speed of two adaptive equalization and/or pre-emphasis strategies for mitigating chromatic and polarization mode dispersions (CD and PMD) in NG-LRPON. We first identify two potential deployment strategies of equalization and/or pre-emphasis. The first equally splits the signal processing in the OLT and ONU; however, the second concentrates most of DSP in the OLT trying to reduce the cost and alleviate the complexity of ONUs. Our investigation shows that the second strategy achieves 50 % faster convergence rate in terms of number of symbols for 16QAM/5 Gbaud. Moreover, we apply the enhanced set membership filtering (SMF) technique, recently introduced for next generation wireless communications, to our LR-PON in order to reduce the update rate of equalizers’ taps, hence reduce the calculation complexity of the OLT and ONUs. Our results show that by employing SMF technique a substantial reduction in the number of mathematical operations needed to attain convergence is achieved. Simulation results reveal that our proposed SMF can reduce the equalizers’ update rate, hence calculation complexity, by 55 % for 16QAM and 75 % for QPSK with marginal degradation of the BER.     

A single-chip dual-band tri-mode CMOS transceiver for IEEE 802.11a/b/g wireless LAN

A single-chip dual-band tri-mode CMOS transceiver that implements the RF and analog front-end for an IEEE 802.11a/b/g wireless LAN is described. The chip is implemented in a 0.25-/spl mu/m CMOS technology and occupies a total silicon area of 23 mm/sup 2/. The IC transmits 9 dBm/8 dBm error vector magnitude (EVM)-compliant output power for a 64-QAM OFDM signal. The overall receiver noise figure is 5.5/4.5 dB at 5 GHz/2.4 GHz. The phase noise is -105 dBc/Hz at a 10-kHz offset and the spurs are below -64 dBc when measured at the 5-GHz transmitter output.     

A PAPR reduction technique using Hadamard transform combined with clipping and filtering based on DCT/IDCT for IM/DD optical OFDM systems

In Intensity Modulator/Direct Detection (IM/DD) optical OFDM systems, the high peak-to-power average ratio (PAPR) will cause signal impairments through the nonlinearity of modulator and fiber. In this paper, a joint PAPR reduction technique based on Hadamard transformation and clipping and filtering using DCT/IDCT transform has been proposed for mitigating the impairments in IM/DD optical OFDM system. We then experimentally evaluated the effect of PAPR reduction on the bit error rate (BER) performance and the results show the effectiveness of the proposed technique. At a bit error rate (BER) of 1 × 10⁻³, the receiver sensitivity of the proposed 2.5 Gb/s IM/DD optical OFDM system after 100-km standard single-mode fiber transmission has been improved by 0.8 dB, 1.3 dB and 3.1 dB for a launch power of 6.4 dBm, 8 dBm and 10 dBm respectively when compared with the classical system.     

The first hot pluggable 2.5 Gb/s DWDM transceiver in an SFP form factor

For the first time, a hot pluggable 2.5 Gb/s DWDM transceiver with 100 GHz spacing in an SFP form factor has been presented. We demonstrate transmit wavelength drift of plusmn9 pm and optical output power stability of 0.2 dB over an operating case temperature range of -5degC to 70 degC. The minimum receive sensitivity was -33.2 dBm for back-to-back, -32.6 dBm after transmission over 80 km of standard SMF, and -28 dBm for an OSNR level of 16 dB at a BER of 1 times 10^-10      

Centralized light-wave WDM-PON employing DQPSK downstream and OOK remodulated upstream signals

A novel architecture for wavelength-division-multiplexing passive optical network(WDM-PON)with centralized light-wave is proposed and demonstrated.At the optical line terminal(OLT)session of this architecture,optical differential quadrature phase shift keying(DQPSK)modulated signal with constant-intensity at 10 Gbit/s is utilized for downstream transmission.At the optical network unit(ONU),part of the downstream optical power is remodulated with on-off keying(OOK)intensity modulation at 10 Gbit/s for upstream without additional laser.Simulation results show that the power penalties of the downstream for 20 km single-mode fiber(SMF)transmission and multi-channels are negligible.While for the upstream,the power penalties are obvious.The simulation results and analysis also reflect that by reducing the launch power of DQPSK transmitters,power penalties can be reduced,although the transmission distance is limited.     

A bandwidth scalable OFDM passive optical network for future access network

In order to reduce the cost for delivering the ever increasing broadband services, network providers need to simplify their network architectures and have a better control of the bandwidth. In this article, we propose a simple and cost-effective bandwidth scalable passive optical network (PON) based on orthogonal frequency division multiplexing (BSOFDM-PON). We report performance analysis in terms of the signal-to-noise ratio (SNR), bit-error-rate (BER), and error vector magnitude (EVM) of a PON system accommodating 32 optical network units (ONUs). Our simulations have successfully demonstrated that throughputs of 35.5 and 53.2 Gbps can be achieved using 16 and 64 QAM, respectively, within a total distance ranging from 20 to 30 km. It gives throughputs of 1.10 and 1.66 Gbps per ONU.     

Combined Analysis of OFDM-UWB Transmission in Hybrid Wireless-Optical Access Networks

The hybrid wireless-optical transmission of ultra-wideband signals employing orthogonal frequency-division multiplexing modulation (OFDM) ultra-wideband (UWB) as defined in the ECMA-368 standard is experimentally analyzed in this letter. The OFDM-UWB signals provide 400 Mb/s per user at optical distances from 5 to 50 km on standard single-mode fiber (SSMF). The analysis includes the wireless radiation from 0 to 3 m after optical transmission. The results indicate a maximum error-vector-magnitude degradation of 2.5 dB measured at 1.5-m radio after 50-km SSMF optical transmission for the first two UWB channels. This degradation translates to 1-m maximum wireless-reach penalty.     

Single, Depolarized, CW Supercontinuum-Based Wavelength-Division-Multiplexed Passive Optical Network Architecture With C-Band OLT, L-Band ONU, and U-Band Monitoring

We propose and experimentally demonstrate a novel bidirectional wavelength-division-multiplexed passive optical network architecture that fully utilizes the superior optical properties of an incoherent continuous-wave (CW) supercontinuum (SC) source. The proposed architecture, which incorporates low-cost Fabry-Perot laser diodes that have been wavelength locked by spectrum-sliced beams from a depolarized 130-nm-bandwidth CW SC source, is based on a unique wavelength band allocation scheme of the C-band for an optical line terminal (OLT), the L-band for optical network units (ONUs), and the U-band for channel monitoring. A cost-effective network that features a single broadband source at the OLT, and no additional wavelength- band-selective monitoring beam reflector at each ONU can be readily achieved. The experimental demonstration presented in this paper is carried out at a data rate of 622 Mb/s over a 25-km standard single-mode fiber.     

Estimation of the Bit Error Rate for Direct-Detected OFDM Signals With Optically Preamplified Receivers

In this paper, we provide a numerical bit error rate (BER) estimation approach for direct-detected orthogonal frequency division multiplexing (OFDM) signals in the presence of optical preamplified receivers. The individual BER of each subcarrier is first computed by considering their electrical signal-to-noise ratio (SNR), and then the ensemble BER is derived simply by taking the average of all the subcarriers' BERs. The calculated BER is verified by the conventional error-counting approach with high precision and is still accurate with higher quadratic-amplitude modulation (QAM) formats, even under the influences of the optical filtering and polarization mode dispersion (PMD) effects. Based on our simulation approach, the required extra power budget for 16- and 64-QAM relative to 4-QAM format are found to be ${sim}$3.8 and 8.2 dB, respectively, at a BER of 10$^{-9}$. Furthermore, we use this approach to compare the receiving sensitivities and PMD tolerances for the previous proposed gapped and interleaved radio-frequency (RF)-tone-assisted OFDM systems. The results show that the gapped OFDM has a better sensitivity while the interleaved OFDM has a more PMD-tolerable capability.      

Suppression of optical beat interference-noise in orthogonal frequency division multiple access-passive optical network link using self-homodyne balanced detection

A new technique, which reduces optical beat interference (OBI) noise in orthogonal frequency division multiple access-passive optical network (OFDMA-PON) links, is proposed. A self-homodyne balanced detection, which uses a single laser for the optical line terminal (OLT) as well as for the optical network unit (ONU), reduces OBI noise and also improves the signal to noise ratio (SNR) of the discrete multi-tone (DMT) signal. The proposed scheme is verified by transmitting quadrature phase shift keying (QPSK)-modulated DMT signal over a 20-km single mode fiber. The optical signal to noise ratio (OSNR), that is required for BER of 10⁻⁵, is reduced by 2 dB in the balanced detection compared with a single channel due to the cancellation of OBI noise in conjunction with the local laser.     

Full-duplex hybrid PON/RoF link with the 10 Gbit/s 16-QAM signal for alternative wired and 60 GHz millimeter-wave wireless accesses

A novel full-duplex hybrid access link with 10 Gbit/s 16-ary quadrature amplitude modulation (16-QAM) wired and wireless converged signal is proposed, which can provide PON access or RoF-based wireless access alternately with centralized lightwave source. The converged signal, consisting of the 10 Gbit/s 16-QAM baseband optical signal and two optical local oscillators (OLOs), is generated by central station and can be decomposed in different patterns at remote base station. For the wired PON access, the identical frequency OLO is used to coherently demodulate the 16-QAM signal; while for the RoF-based wireless access, the 16-QAM signal and its parallel polarized OLO are abstracted as optical millimeter wave by a polarization beam splitter; the other OLO is used as the uplink optical carrier to carry wired or wireless uplink signal. Since the three tones come from the same source, they maintain high coherency even after transmitted over fiber link. The proposed hybrid wired/wireless full-duplex fiber link suffers little from fiber chromatic dispersion. These are verified by simulations for both wired and wireless access applications.     

色散平坦光纤中的高速率PM-16QAM信号传输研究

提出了一种高速率、偏振复用、正交幅度调制信号的色散平坦光纤传输系统,传输速率分别为160 Gbps和256 Gbps,调制格式为PM-16QAM。实验研究了色散平坦光纤链路系统的传输特性,并分别与非零色散位移光纤和标准单模光纤链路传输特性做了比较。实验结果表明,较低输入光功率情况下,PM-16QAM信号在160 Gbps传输50 km时,经色散平坦光纤传输后的误差矢量幅度EVM优于经非零色散位移光纤传输情况0.5%,比特误码率BER优于非零色散位移光纤传输情况两个数量级;色散平坦光纤链路能更好地衰减旁瓣噪声;256 Gbps传输50 km和75 km时,仅在色散平坦光纤链路传输后可以较好地解调出信号;传输距离越长,保持较好特性时输入光功率范围越小。对比160 Gbps和256 Gbps情况,高速率PM-16QAM信号在色散平坦光纤链路的传输特性优于非零色散位移光纤和标准单模光纤链路的传输特性,传输速率越高、传输距离越长效果越明显。     

Estimated performance of 2.488 Gb/s CPFSK optical non-repeateredtransmission system employing high-output power EDFA boosters

The configuration of a practical nonrepeatered coherent optical transmission system and its performance are reported. The practicability of combining continuous-phase frequency-shift keying (CPFSK) with erbium-doped fiber amplifier (EDFA) boosters is verified by laboratory and field experiments. A system gain of 60.8 dB is achieved at a BER at 10^-11; the EDFA's optical output power is +18 dBm and the receiver sensitivity is -42.8 dBm. The stimulated Brillouin scattering (SBS) effect is examined to estimate the dependence of error rate characteristics on the bit sequence length. No power penalty is observed for a pseudorandom bit sequence (PRBS) of more than 2⁵-1 or STM-16 patterns containing a 30-byte block of consecutive identical digits. The power penalty of 1.3 dB caused by the 310-km non-dispersion-shifted transmission fiber is successfully compensated by installing a chromatic dispersion compensator in each orthogonal polarization branch. During a four month field experiment, error-free operation was observed over a 30 day period, and the long-term error rate is under 6×10^-16     

Experimental demonstration of an improved EPON architecture using OFDMA for bandwidth scalable LAN emulation

We propose and demonstrate an improved Ethernet passive optical network (EPON) architecture supporting bandwidth-scalable physical layer local area network (LAN) emulation. Due to the use of orthogonal frequency division multiple access (OFDMA) technology for the LAN traffic transmission, there is no need to change the existing EPON architecture. Only one receiver at each optical network unit (ONU) is required to detect both LAN traffic and EPON downstream traffic, which makes the proposed system simple and cost-effective. Moreover, flexible assignment of LAN traffic bandwidth is realized by allocating different number of subcarriers or using different modulation formats. The 250 Mb/s 4-quadrature amplitude modulation (4-QAM) and 500 Mb/s 16-QAM OFDM LAN traffic are successfully emulated with the EPON traffic in our experiment.     

Centralized light-wave WDM-PON employing DQPSK downstream and 00K remodulated upstream signals

A novel architecture for wavelength-division-multiplexing passive optical network (WDM-PON) with centralized light-wave is proposed and demonstrated. At the optical line terminal (OLT) session of this architecture, optical differential quadrature phase shift keying (DQPSK) modulated signal with constant-intensity at 10 Gbit/s is utilized for downstream transmission. At the optical network unit (ONU), part of the downstream optical power is remodulated with on-off keying (OOK) intensity modulation at 10 Gbit/s for upstream without additional laser. Simulation results show that the power penalties of the downstream for 20 km single-mode fiber (SMF) transmission and multi-channels are negligible. While for the upstream, the power penalties are obvious. The simulation results and analysis also reflect that by reducing the launch power of DQPSK transmitters, power penalties can be reduced, although the transmission distance is limited.