Construction of Polyoxometalate-Based Material for Eliminating Multiple Pb-Based Defects and Enhancing Thermal Stability of Perovskite Solar Cells

The high-quality perovskite film with few defects plays an important role in the power conversion efficiency (PCE) and long-term stability of perovskite solar cells. Here, an efficient strategy is proposed to eliminate Pb⁰ and passivate Pb²⁺ simultaneously by employing a stable polyoxometalate-based material CoW₁₂@MIL-101(Cr) in the precursor solution of perovskite. The controllable oxidation ability of CoW₁₂ is optimized through the interaction with metal–organic frameworks, resulting in a doped perovskite film with regular morphology, large grain size, and low defects density. The solvent effects and formation of intermediate materials in the precursor solution are further investigated by an in situ thermogravimetry-Fourier transform infrared spectroscopy analysis. In addition, the champion doped-device showed enhanced PCE to 21.39% and excellent stability, maintaining 85% and 89% of the original PCE after heating at 85 °C in N₂ atmosphere and stored in ambient conditions (25 °C, 40% humidity) for 1000 h, respectively.     

Porphyrinic Metal–Organic Framework Quantum Dots for Stable n–i–p Perovskite Solar Cells

As the power-conversion efficiency (PCE) of organic–inorganic lead halide perovskite solar cells (PSCs) is approaching the theoretical maximum, the most crucial issue concerns long-term ambient stability. Here, the application of PCN-224 quantum dots (QDs) is reported, a typical Zr-based porphyrinic metal–organic framework (MOF), to enhance the ambient stability of PSCs. PCN-224 QDs with abundant Lewis-base groups (e.g., CO, C−N, CN) contribute to high-quality perovskite films with enlarged grain size and reduced defect density by interaction with under-coordinated Pb²⁺. Meanwhile, PCN-224 QDs enable the well-matched energy level at the perovskite/hole transport layer (HTL) interface, thereby facilitating hole extraction and transport. More importantly, PCN-224 QDs-treated HTL can capture Li⁺ from bis(trifluoromethanesulfonyl)imide additive, leading to the reduced aggregation and less direct contact with moisture for hygroscopic Li-TFSI. Moreover, PCN-224 QDs mitigated Li⁺ ion migration into the perovskite layer, thus avoiding the formation of deleterious defects. The resultant devices yield a champion PCE of 22.51%, along with substantially improved durability, including humidity, thermal and light soaking stabilities. The findings provide a new approach toward efficient and stable PSCs by applying MOF QDs.     

Spidermen Strategy for Stable 24% Efficiency Perovskite Solar Cells

The interface energetics-modification plays an important role in improving the power conversion efficiency (PCE) among the perovskite solar cells (PSCs). Considering the low carrier mobility caused by defects in PSCs, a double-layer modification engineering strategy is adopted to introduce the “spiderman” NOBF₄ (nitrosonium tetrafluoroborate) between tin dioxide (SnO₂ and perovskite layers. NO⁺, as the interfacial bonding layer, can passivate the oxygen vacancy in SnO₂, while BF₄⁻ can optimize the defects in the bulk of perovskite. This conclusion is confirmed by theoretical calculation and transmission electron microscopy (TEM). The synergistic effect of NO⁺ and BF₄⁻ distinctly heightens the carrier extraction efficiency, and the PCE of PSCs is 24.04% with a fill factor (FF) of 82.98% and long-term stability. This study underlines the effectiveness of multifunctional additives in improving interface contact and enhancing PCE of PSCs.     

Multifunctional Organic Potassium Salt Additives as the Efficient Defect Passivator for High-Efficiency and Stable Perovskite Solar Cells

Despite the rapid developments are achieved for perovskite solar cells (PSCs), the existence of various defects in the devices still limits the further enhancement of the power conversion efficiency (PCE) and the long-term stability of devices. Herein, the efficient organic potassium salt (OPS) of para-halogenated phenyl trifluoroborates is presented as the precursor additives to improve the performance of PSCs. Studies have shown that the 4-chlorophenyltrifluoroborate potassium salt (4-ClPTFBK) exhibits the most effective interaction with the perovskite lattice. Strong coordination between  BF₃⁻/halogen in anion and uncoordinated Pb²⁺/halide vacancies, along with the hydrogen bond between F in  BF₃⁻ and H in FA⁺ are observed. Thus, due to the synergistic contribution of the potassium and anionic groups, the high-quality perovskite film with large grain size and low defect density is achieved. As a result, the optimal devices show an enhanced efficiency of 24.50%, much higher than that of the control device (22.63%). Furthermore, the unencapsulated devices present remarkable thermal and long-term stability, maintaining 86% of the initial PCE after thermal test at 80 °C for 1000 h and 95% after storage in the air for 2460 h.     

Undercoordinated Pb2+ defects passivation via tetramethoxysilane-modified for efficient and stable perovskite solar cells

Organic-inorganic hybrid perovskite solar cells (PSCs) have developed rapidly in recent years, and the instability limits its commercialization. Non-radiative recombination caused by defects and water stability affect the device stability. Here we introduce an organic silane additive, tetramethoxysilane (TMOS), which can reduce the non-radiative recombination and prevent the water erosion. The methoxy group in TMOS can combine with Pb²⁺ of perovskite to passivate undercoordinated Pb²⁺ defects and reduce non-radiative recombination. Under a certain humidity, the hydrolyzed product SiO₂ can occupy the grain boundary sites to prevent the erosion of water molecules, slow down the degradation of perovskite, and improve the crystal phase stability of perovskite. The PCE of the device increases from 17.13% to 20.12%. After 400 h at 50% relative humidity (RH), the PSC with 2% TMOS can maintain the efficiency of 90%, while the efficiency of the control group quickly dropped to only 70% of the initial.     

Self-Polymerization of Monomer and Induced Interactions with Perovskite for Highly Performed and Stable Perovskite Solar Cells

While there is promising achievement in terms of the power conversion efficiency (PCE) of perovskite solar cells (PSCs), long-term stability has been considered the main obstacle for their practical application. In this work, the authors demonstrate the small monomer 2-(dimethylamino) ethyl methacrylate (DMAEMA) with unsaturated carboxylic acid ester bond in the antisolvent for perovskite formation to improve the PCE and stability. The results show that DMAEMA is self-polymerized and uniformly distributed in the film, contributing to the improved crystallinity of the perovskites. Equally important, it is found that there are newly established interactions of Pb²⁺ and DMAEMA, and iodine and ternary amine between DMAEMA and perovskites, which improves the uniformity of the lead (II) iodide vertical distribution along with the films and thus phase stability, as well as largely decreases defects density in the film. Overall, the inverted PSCs with DMAEMA exhibit a open-circuit voltage of 1.10 V, short-circuit current of 23.86 mA cm^?2, fill factor of 0.82, and finally PCE reaches 21.52%. Meanwhile, the PSC stability is significantly improved due to the inhibition of the formation of iodine, reduction of the uncoordinated Pb²⁺, and suppression of phase segregation.     

Highly-Stable CsPbI3 Perovskite Solar Cells with an Efficiency of 21.11% via Fluorinated 4-Amino-Benzoate Cesium Bifacial Passivation

The poor interface quality between cesium lead triiodide (CsPbI₃) perovskite and the electron transport layer limits the stability and efficiency of CsPbI₃ perovskite solar cells (PSCs). Herein, a 4-amino-2,3,5,6-tetrafluorobenzoate cesium (ATFC) is designed as a bifacial defect passivator to tailor the perovskite/TiO₂ interface. The comprehensive experiments demonstrate that ATFC can not only optimize the conductivity, electron mobility, and energy band structure of the TiO₂ layer by passivation of the undercoordinated Ti⁴⁺, oxygen vacancy (V_O), and free  OH defects but also promote the yield of high-quality CsPbI₃ film by synergistic passivation of undercoordinated Pb²⁺ defects with the  CO group and F atom, and limiting I⁻ migration via F···I interaction. Benefiting from the above interactions, the ATFC-modified CsPbI₃ device yields a champion power conversion efficiency (PCE) of 21.11% and an excellent open-circuit voltage (V_OC) of 1.24 V. Meanwhile, the optimized CsPbI₃ PSC maintains 92.74% of its initial efficiency after aging 800 h in air atmosphere, and has almost no efficiency attenuation after tracking at maximum power point for 350 h.     

Co-Evaporated MAPbI3 with Graded Fermi Levels Enables Highly Performing,Scalable, and Flexible p-i-n Perovskite Solar Cells

Recent progress of vapor-deposited perovskite solar cells (PSCs) has proved the feasibility of this deposition method in achieving promising photovoltaic devices. For the first time, it is probed the versatility of the co-evaporation process in creating perovskite layers customizable for different device architectures. A gradient of composition is created within the perovskite films by tuning the background chamber pressure during the growth process. This method leads to co-evaporated MAPbI₃ film with graded Fermi levels across the thickness. Here it is proved that this growth process is beneficial for p-i-n PSCs as it can guarantee a favorable energy alignment at the charge selective interfaces. Co-evaporated p-i-n PSCs, with different hole transporting layers, consistently achieve power conversion efficiency (PCE) over 20% with a champion value of 20.6%, one of the highest reported to date. The scaled-up p-i-n PSCs, with active areas of 1 and 1.96 cm², achieved the record PCEs of 19.1% and 17.2%, respectively, while the flexible PSCs reached a PCE of 19.3%. Unencapsulated PSCs demonstrate remarkable long-term stability, retaining ≈90% of their initial PCE when stored in ambient for 1000 h. These PSCs also preserve over 80% of their initial PCE after 500 h of thermal aging at 85 °C.     

Precursor Engineering for All‐Inorganic CsPbI2Br Perovskite Solar Cells with 14.78% Efficiency

The optoelectronic properties of perovskite films are closely related to the film quality, so depositing dense, uniform, and stable perovskite films is crucial for fabricating high‐performance perovskite solar cells (PSCs). CsPbI₂Br perovskite, prized for its superb stability toward light soaking and thermal aging, has received a great deal of attention recently. However, the air instability and poor performance of CsPbI₂Br PSCs are hindering its further progress. Here, an approach is reported for depositing high‐quality CsPbI₂Br films via the Lewis base adducts PbI₂(DMSO) and PbBr₂(DMSO) as precursors to slow the crystallization of the perovskite film. This process produces CsPbI₂Br films with large‐scale crystalline grains, flat surfaces, low defects, and long carrier lifetimes. More interestingly, PbI₂(DMSO) and PbBr₂(DMSO) adducts could significantly improve the stability of CsPbI₂Br films in air. Using films prepared by this technique, a power conversion efficiency (PCE) of 14.78% is obtained in CsPbI₂Br PSCs, which is the highest PCE value reported for CsPbI₂Br‐based PSCs to date. In addition, the PSCs based on DMSO adducts show an extended operational lifetime in air. These excellent performances indicate that preparing high‐quality inorganic perovskite films by using DMSO adducts will be a potential method for improving the performance of other inorganic PSCs.     

Efficient Passivation Strategy on Sn Related Defects for High Performance All-Inorganic CsSnI3 Perovskite Solar Cells

Despite remarkable progress in hybrid perovskite solar cells (PSCs), the concern of toxic lead ions remains a major hurdle in the path towards PSC's commercialization; tin (Sn)-based PSCs outperform the reported Pb-free perovskites in terms of photovoltaic performance. However, it is of a particularly great challenge to develop effective passivation strategies to suppress Sn(II) induced defect densities and oxidation for attaining high-performance all-inorganic CsSnI₃ PSCs. Herein, a facile yet effective thioamides passivation strategy to modulate defect state density at surfaces and grain boundaries in CsSnI₃ perovskites is reported. The thiosemicarbazide (TSC) with SC N functional groups can make strong coordination interaction with charge defects, leading to enhanced electron cloud density around defects and increased vacancy formation energies. Importantly, the surface passivation can reduce the deep level trap state defect density originated from undercoordinated Sn²⁺ ion and Sn²⁺ oxidation, significantly restraining nonradiative recombination and elongating the carrier lifetime of TSC treated CsSnI₃ PSCs. The surface passivated all-inorganic CsSnI₃ PSCs based on an inverted configuration delivers a champion power conversion efficiency (PCE) of 8.20%, with a prolonged lifetime over 90% of initial PCE, after 500 h of continuous illumination. The present strategy sheds light on surface defect passivation for achieving highly efficient all-inorganic lead-free Sn-based PSCs.     

Concurrent Top and Buried Surface Optimization for Flexible Perovskite Solar Cells with High Efficiency and Stability

Although much progress is made toward enhancing the efficiency of perovskite solar cells (PSCs), their operational reliability, particularly their mechanical stability, which is a crucial factor for flexible PSCs (f-PCSs), has not attracted sufficient attention. The defects in the perovskite layer, especially on the top and the buried surface of the perovskite layer, can induce perovskite fracture, highly limiting the performance of f-PSCs. Herein, a novel multifunctional organic salt, metformin hydrochloride, which can passivate cationic and anionic defects, is incorporated on both the top and buried surfaces of perovskite layer to suppress defects. As a result, a power conversion efficiency (PCE) of 24.40% for rigid PSCs and a PCE of 22.04% for f-PSCs are achieved. Simultaneously, the device can retain 90% and 80% of the initial efficiency after 1000 h of light illumination and 10 000 bending cycles, respectively, showing excellent operational stability. This study may provide a global way to design a passivation strategy and fabricate flexible perovskite solar cells with high efficiency and stability.     

Illumination Enhanced Crystallization and Defect Passivation for High Performance CsPbI3 Perovskite Solar Cells by Sacrificing Dye

All-inorganic perovskite solar cells (PSCs) have been the research focus due to their high thermal stability and proper band gap for tandem solar cells. However, their power conversion efficiency (PCE) is still lower than that of organic-inorganic hybrid PSCs. Herein, a sacrificing dye (Rhodamine B isothiocyanate, RBITC) is developed to regulate the growth of perovskite film by in situ release of ethylammonium cations, isothiocyanate anions and benzoic acid molecules upon annealing and illumination. The ethylammonium cations can efficiently passivate surface defects. The isothiocyanate anions incorporate with uncoordinated Pb to regulate the crystallization process. The benzoic acid molecules facilitate the nucleation of the perovskite crystals. Especially, the illumination can accelerate the release of these beneficial ions/molecules to improve the quality of perovskite films further. After optimization with RBITC, a high open circuit voltage (V_OC) of 1.24 V and a champion PCE of 20.95% are obtained, which are among the highest Voc and PCE values of CsPbI₃ PSCs. Accordingly, the operational stability of the PSC devices is significantly improved. The results provide an efficient chemical strategy to regulate the formation of perovskite films in whole crystallization process for high performance all-inorganic PSCs.     

Multifunctional Cross-Linked Polyurethane Polymer as Interface Layer for Efficient and Stable Perovskite Solar Cells

In the past decade, perovskite solar cells (PSCs) have made remarkable progress in improving power conversion efficiency (PCE). In order to further improve the photovoltaic performance and long-term stability of PSCs, the interface layer is essential. A multifunctional cross-linked polyurethane (CLPU) is designed and synthesized via the spontaneous quaternization of polyurethane and 1, 6-diiodohexane on the surface of the perovskite layer. CLPU layer cannot only effectively induce secondary crystallization and passivate the surface defects of perovskite, reduce the non-radiative recombination, but also effectively block the moisture invasion. By this strategy, Cs_0.05FA_0.95PbI₃ PSCs with excellent reproducibility, is realized, achieving a PCE of 23.14% with an open-circuit voltage of 1.11 V, a short-circuit current density of 25.69 mA cm⁻², and a fill factor of 0.81. In addition, the unencapsulated devices show enhanced stability in 35 ± 5% relative humidity (RH) near 3000 h and in 65 ± 5% RH over 700 h. This study provides valuable insights into the role of CLPU interface layer in PSCs, which are essential for the design of high-performance devices.     

Interfacial Energy Level Alignment and Defect Passivation by Using a Multifunctional Molecular for Efficient and Stable Perovskite Solar Cells

Tin oxide (SnO₂) is currently the dominating electron transport material (ETL) used in state-of-the-art perovskite solar cells (PSCs). However, there are amounts of defects distributed at the interface between ETL and perovskite to deteriorate PSC performance. Herein, a molecule bridging layer is built by incorporating 2,5-dichloroterephthalic acid (DCTPA) into the interface between the SnO₂ and perovskites to achieve better energy level alignment and superior interfacial contact. The multifunctional molecular bridging layer not only can passivate the trap states of Sn dangling bonds and oxygen vacancies resulting in improved conductivity and the electron extraction of SnO₂ but also can regulate the perovskite crystal growth and reduce defect-assisted nonradiative recombination due to its strong interaction with undercoordinated lead ions. As a result, the DCTPA-modified PSCs achieve champion power conversion efficiencies (PCEs) of 23.25% and 20.23% for an active area of 0.15 cm² device and 17.52 cm² mini-module, respectively. Moreover, the perovskite films and PSCs based on DCTPA modification show excellent long-term stability. The unencapsulated target device can maintain over 90% of the initial PCE after 1000 h under ambient air. This strategy guides design methods of molecule bridging layer at the interface between SnO₂ and perovskite to improve the performance of PSCs .     

Spacer Cation Tuning Enables Vertically Oriented and Graded Quasi-2D Perovskites for Efficient Solar Cells

Halide substitution in phenethylammonium spacer cations (X-PEA⁺, X  = F, Cl, Br) is a facile strategy to improve the performance of PEA based perovskite solar cells (PSCs). However, the power conversion efficiency (PCE) of X-PEA based quasi-2D (Q-2D) PSCs is still unsatisfactory and the underlying mechanisms are in debate. Here, the in-depth study on the impact of halide substitution on the crystal orientation and multi-phase distribution in PEA based perovskite films are reported. The halide substitution eliminates n  =  1 2D perovskite and thus leads to the perpendicular crystal orientation. Furthermore, nucleation competition exists between small-n and large-n phases in PEA and X-PEA based perovskites. This gives rise to the orderly distribution of different n-phases in the PEA and F-PEA based films, and random distribution in Cl-PEA and Br-PEA based films. As a result, (F-PEA)₂MA₃Pb₄I₁₂ (MA = CH₃NH₃⁺, n = 4) based PSCs achieve a PCE of 18.10%, significantly higher than those of PEA (12.23%), Cl-PEA (7.93%) and Br-PEA (6.08%) based PSCs. Moreover, the F-PEA based devices exhibit remarkably improved stability compared to their 3D counterparts.     

The Synergistic Effect of Pemirolast Potassium on Carrier Management and Strain Release for High-Performance Inverted Perovskite Solar Cells

The quality of the perovskite absorption layer is critical for the high efficiency and long-term stability of perovskite solar cells (PSCs). The inhomogeneity due to local lattice mismatch causes severe residual strain in low-quality perovskite films, which greatly limits the availability of high-performance PSCs. In this study, a multi-active-site potassium salt, pemirolast potassium (PP), is added to perovskite films to improve carrier dynamics and release residual stress. X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) measurements suggest that the proposed multifunctional additive bonds with uncoordinated Pb²⁺ through the carbonyl group/tetrazole N and passivated I atom defects. Moreover, the residual stress release is effective from the surface to the entire perovskite layer, and carrier extraction/transport is promoted in PP-modified perovskite films. As a result, a champion power conversion efficiency (PCE) of 23.06% with an ultra-high fill factor (FF) of 84.36% is achieved in the PP-modified device, which ranks among the best in formamidinium-cesium (FACs) PSCs. In addition, the PP-modified device exhibits excellent thermal stability due to the inhibited phase separation. This work provides a reliable way to improve the efficiency and stability of PSCs by releasing residual stress in perovskite films through additive engineering.     

Constructing All-Inorganic Perovskite/Fluoride Nanocomposites for Efficient and Ultra-Stable Perovskite Solar Cells

Organic-inorganic hybrid perovskite solar cells (PSCs) have rapidly developed over the past decade and have achieved the latest certified power conversion efficiency (PCE) up to 25.5%. However, unsatisfactory long-term operational stability for these hybrid PSCs remains a huge obstacle to further development and commercialization. Herein, a unique hetero-structured CsPbI₃/CaF₂ perovskite/fluoride nanocomposites (PFNCs) is fabricated via a newly developed facile two-step hetero-epitaxial growth strategy to deliver efficient and ultra-stable PSCs. After being incorporated into the crystal lattice of α-phase CsPbI₃ perovskite, the cubic-phase CaF₂ in the resultant CsPbI₃/CaF₂ PFNCs can not only passivate the intrinsic defects of CsPbI₃ perovskite itself but also effectively suppress the notorious ion migration in hybrid perovskite Cs_0.05FA_0.81MA_0.14PbI_2.55Br_0.45 (CsFAMA) thin-films of PSCs. As such, the CsFAMA PSC devices based on CsPbI₃/CaF₂-deposited perovskite thin-film achieve a mean PCE of 20.45%, in sharp contrast to 19.33% of the control devices without deposition. Specifically, the CsPbI₃/CaF₂-deposited PSC retains 85% of its original PCE after 1000 h continuous operation at the maximum power point under AM 1.5G solar light, far better than those of the control and CsPbI₃-deposited PSCs with a device T₈₅ lifetime of 315 and 125 h, respectively.     

24.64%-Efficiency MA-Free Perovskite Solar Cell with Voc of 1.19 V Enabled by a Hinge-Type Fluorine-Rich Complex

High density of defects at interface severely affects the performance of perovskite solar cells (PSCs). Herein, cobalt (II) hexafluoro-2,4-pentanedionat (CoFAc), a hinge-type fluorine-rich complex, is introduced onto the surface of formamidinium cesium lead iodide (FACsPbI₃) film to address the issues of perovskite/Spiro-OMeTAD interface. The existence of CoFAc passivates both organic cation and halide anion vacancies by establishing powerful hydrogen bonds with HC(NH₂)₂⁺ (FA⁺) and strong ionic bonds with Pb²⁺ in perovskite films. In addition, CoFAc serves as a connecting link to enhance interfacial hole-transport kinetics via interacting with Spiro-OMeTAD. Consequently, FACsPbI₃ PSCs with CoFAc modification display a champion power conversion efficiency (PCE) of 24.64% with a charming open-circuit voltage (V_OC) of 1.191 V, which is the record V_OC among all the reported organic-inorganic hybrid PSCs with TiO₂ as electron transport layer. Furthermore, CoFAc-modified devices exhibit an outstanding long-term stability, which can maintain 95% of their initial PCEs after exposure to ambient atmosphere for 1500 h without any encapsulation.     

Double-layered hole transport material of CuInS2/Spiro for highly efficient and stable perovskite solar cells

In this paper, double-layered hole transport material (HTM) was designed and fabricated by adding a thin CuInS₂ film between perovskite and Spiro-OMeTAD (Spiro) layers. The power conversion efficiency (PCE) of the perovskite solar cells (PSCs) with double-layered HTM of CuInS₂/Spiro was improved to 19.63% from 17.97% for the devices with pure Spiro. Moreover, the operational stability of the PSCs with double-layered HTM of CuInS₂/Spiro was enhanced. The PCE of the PSCs with CuInS₂/Spiro retains 91% of the initial value after 30 days storage in ambient atmosphere. The experimental results indicate that the improved performance could be come from the energy band match between CuInS₂ and Spiro, fast hole extraction and transport, and decreased charge recombination in the PSCs with double-layered HTM of CuInS₂/Spiro. This work provides a promising prospect to design a low-cost and high stability HTM for commercial PSCs.     

TiI4-doping induced bulk defects passivation in halide perovskites for high efficient photovoltaic devices

Power conversion efficiency (PCE) and stability are two important properties of perovskite solar cells (PSCs). Particularly, defects in the perovskite films could cause the generation of trap states, thereby increasing the nonradiative recombination. To address this issue, suitable dopants can be incorporated to react with non-bonded atoms or surface dangling bonds to passivate the defects. Herein, we introduced TiI₄ into CH₃NH₃PbI₃ (MAPbI₃) film and obtained a dense and uniform morphology with large crystal grains and low defect density. The champion cell based on 0.5% TiI₄-doped MAPbI₃ achieved a PCE as high as 20.55%, which is superior to those based on pristine MAPbI₃ (17.64%). Moreover, the optimal solar cell showed remarkable stability without encapsulation. It retained 88.03% of its initial PCE after 300 h of storage in ambient. This work demonstrates TiI₄ as a new and effective passivator for MAPbI₃ film.