Compact CPW-Fed ultrawideband MIMO antenna using hexagonal ring monopole antenna elements

In this paper, a compact coplanar waveguide (CPW) fed ultra-wide band (UWB) multi input multi output (MIMO) antenna is proposed. The antenna consists of two antiparallel hexagonal ring monopole elements. Circular arcs shaped grounded stubs are used to enhance the isolation, both the arcs are connected through stub to make common ground. Tapering of the slots of CPW feed line at feed point, and grounded slots are introduced for impedance matching over UWB. The proposed antenna is fabricated and impedance bandwidth, isolation, radiation pattern, and gain are measured. Moreover, envelop correlation coefficient (ECC) results are given. Proposed antenna structure operates in the frequency range 3–12 GHz with a fractional bandwidth of 120% keeping isolation better than 15 dB. The antenna has a compact size of 45 × 25 mm².     

Broadband Multiple Input Multiple Output antenna for sub-6-GHz 5G communications

This paper presents the design of a miniaturized broadband monopole antenna for 5G and Wireless Local Area Network (WLAN) applications in mobile handsets. The proposed monopole evolved from a rectangular geometry of size 12 × 5 mm. The slot and stub loading techniques are used to improve the impedance matching offered by the antenna. Furthermore, bandwidth broadening is achieved using lumped elements loaded onto the aperture of the antenna. The proposed miniaturized antenna exhibits a measured impedance bandwidth of 63.6% (3.0–5.8 GHz) covering the 5G spectrum allocations under sub-6 GHz and the WLAN services. The antenna elements are replicated along the sides of the mock mobile handset PCB to study the functionality of the eight-element MIMO antenna. The prototype MIMO antenna fabricated and tested in the laboratory offers a peak gain of 3 dBi and total efficiency greater than 72%. Owing to miniaturization, the spatial distribution of the antenna element provides a low envelope correlation (ECC) of less than 0.2 and good diversity gain (DG) greater than 7.8 dB. In addition, the mean effective gain (MEG), channel capacity loss (CCL), multiplexing efficiency (ME), and total active reflection coefficient (TARC) are evaluated and presented. The estimated MIMO metrics are within the desired range of operation and hence make the antenna suitable for a complex propagation environment. The prototype antenna is developed on a thin microwave laminate with low-loss characteristics and tested under laboratory conditions. The outcomes indicate that the proposed eight-element antenna can be applied to 5G MIMO communications.     

Bi-directional UWB MIMO Antenna for Superior Spatial Diversity,and/or Multiplexing MIMO Performance

In this paper, a two-element UWB MIMO antenna with bi-directional radiation pattern is designed for superior UWB MIMO performance. The designed antenna adopts asymmetric coplanar waveguide ground feeding. The proposed antenna ECC is lower than the ECC of its omni-directional peer antenna. Simulated and measured ECC is lower than 0.016 over the entire ultra-wide bandwidth (3.1–10.6 GHz). The isolation between elements of the designed antenna is 20–25 dB exceeding the average in recently published works. The designed antenna has a diversity gain of almost 10 dB and average multiplexing efficiency of 85% over the entire ultra-wide bandwidth. The antenna preserves radiation efficiency higher than 0.96 and gain 3 dB. The diversity performance of the proposed UWB MIMO antenna is proven through real rich-multipath indoor environment measurements. Stationarity of the elected channel is evaluated through 100 successive measurements separated by a 3-min period for 5 h long. The measured spatial correlation coefficients are much lower than 0.5 in different scenarios.     

Broadband sub-6 GHz flower-shaped MIMO antenna with high isolation using theory of characteristic mode analysis (TCMA) for 5G NR bands and WLAN applications

A small size neutralization line integrated flower-shaped MIMO antenna is designed and analyzed for sub-6 GHz type 5G NR frequency bands like n79 (4400–5000 MHz), n78 (3300–3800 MHz), n77 (3300–4200 MHz), and WLAN (5150–5825 MHz) applications. The novel approach of theory of characteristic mode analysis (TCMA) is introduced to provide physical insight of the designed structure and its characteristics behavior. Due to the suggested modifications in the geometry, the isolation among the patches is greatly increased. The overall miniaturized dimension of the MIMO antenna is 25 × 40 mm². The edge-edge spacing among the elements is 0.0233λ. The prototype antenna is fabricated and measured that shows good agreement compared with simulated results. The designed MIMO antenna without the presence of decoupling structure offers an isolation of 28 dB, gain of 3.6 dBi, and radiation efficiency of 69.7% at the resonant frequency. The proposed MIMO antenna covers a broad range of frequency band from 3.296 to 5.962 GHz with −10 dB impedance bandwidth of 2666 MHz and maintains a good isolation of greater than 50 dB for the entire operating band. The tested radiation efficiency and gain are 85.3% and 6.22 dBi at 3.5 GHz. Moreover, the diversity parameters of the neutralization line integrated MIMO antenna, that is, channel capacity loss (CCL) isolation, mean effective gain (MEG), total active reflection coefficient (TARC) diversity gain (DG), and envelope correlation coefficient (ECC), are analyzed and discussed in this article.     

Printed Planar Monopole Antenna Design for Ultra-Wideband Communications

This paper presents an ultra wideband (UWB) planar printed monopole antenna fed by microstrip line. The antenna configuration contains a beveled ground plane. The beveled partial ground plane improves the impedance bandwidth. The measured frequency response demonstrates that the fabricated antenna exhibits an impedance bandwidth of 7.9 GHz over 3.1 to 11 GHz for VSWR < 2. The proposed antenna has ultra-wideband characteristics with omnidirectional radiation pattern and stable gain. Ultra-wideband performance of the proposed antenna is examined through the simulated surface current distributions. Measured results confirm that the antenna is suitable for UWB applications due to its compact size and high performance characteristics.     

一种基于人工电磁超材料的宽带MIMO天线去耦方法

本文提出了一种新的基于人工电磁超材料的宽带MIMO(Multiple-Input Multiple-Output)天线的去耦方法,通过在两个天线单元之间周期性放置开口三角环形谐振器（open triangular ring resonators,OTRRs）来降低耦合度。多个不同谐振频率的OTRRs有效地增强了去耦带宽,与未加载去耦结构的MIMO天线相比,在5.2GHz频段,百分比带宽为5.74%,隔离度提高了9dB以上。     

Miniaturized six-ring elliptical monopole-based MIMO antenna for ultrawideband applications

This paper proposes a miniature two-element Multiple Input Multiple Output (MIMO) antenna dedicated to UWB applications. The proposed MIMO design has a very low profile of 30 × 20 × 1.6 mm³. The proposed antenna is carefully designed and optimized using HFSS simulation software. As a proof of concept, the proposed design is realized and experimentally tested for MIMO applications. The proposed structure, printed on an FR4 substrate, comprises two symmetrical elliptical conductive patches on the upper side and a modified ground plane on the lower one. Each radiating element includes six elliptical rings. The modified ground plane consists of a T-shaped strip and two semielliptical slots etched opposite the feed line. All the parameters of the design are carefully optimized to achieve an ultrawide bandwidth antenna spanning from (136.08%) 3.1 to 16.3 GHz. The results are discussed and analyzed in terms of bandwidth, gain, efficiency, radiation pattern, diversity gain, envelope correlation coefficient (ECC), total active reflection coefficient (TARC), and mean effective gain (MEG). All simulated results are found to be in good accordance with experiments. The design reveals attractive features for UWB applications. A good isolation (17 dB) between the two radiators is achieved despite the close proximity using the suggested ground plane geometry.     

A Compact Semi-circular Slot MIMO Antenna with Enhanced Isolation for Sub-6 GHz 5G WLAN Applications

In this paper, a novel compact semi-circular slot (SCS) 2 × 2 MIMO antenna is presented for 5G NR sub-6 GHz applications with high isolation. The proposed antenna consists of a semi-circular slot in ground plane, U-shaped stub, and 50-ohm microstrip feed line. The novelty of this paper are the Semi-Circular Slot acts a radiator, the port isolation  is enhanced using a simple conductor strip as a neutralization line, very compact in size, low ECC, and good impedance matching. The overall size of the proposed SCS MIMO antenna is 16 mm x 21 mm, and FR4 substrate is used with thickness of 1.6 mm. The two SCS antenna elements are separated by edge-to-edge distance of 1mm (\(=0.019\lambda _{0}\)). The proposed compact MIMO antenna design is simulated using Ansys HFSS. To validate SCS MIMO antenna, a prototype was fabricated and tested. The measured results are attained at 5.5 GHz with isolation greater than 25dB, impedance bandwidth (S11\(<-10\) dB) covers from 5.10 GHz to 5.80 GHz with return loss of ? 39.5 dB. The MIMO antenna parameters, ECC, CCL, TARC, and MEG are studied, and the values are obtained within acceptable limits. The measured and simulated antenna results are almost similar. This compact MIMO antenna is suitable for 5G communications in sub-6 GHz wifi-5 band applications.

     

一种新颖的宽带圆极化单极天线

该文设计了一种新颖的宽带圆极化单极子天线,该天线采用微带馈电模式。天线由C型贴片和改进的地板组成,整个天线尺寸仅为25×25×1 mm3。通过在C型贴片上切角和在地板上增加三角形微扰结构,可以有效增加天线的阻抗带宽和轴比带宽。该文给出了天线的设计流程,从表面电流分布分析了圆极化天线的工作机理。加工了天线实物,并对其进行了测量。仿真和实测结果表明天线具有超宽的阻抗带宽和轴比带宽。天线的工作频带为4.35～12 GHz(相对带宽为93.6%),3 dB轴比带宽为4.15～11.8 GHz(相对带宽为95.9%)。测量了天线的辐射性能和增益特性,实测结果与仿真结果吻合较好,证明了该天线的有效性。该天线可以应用于超宽带无线通信系统和卫星通信系统中。     

A compact CPW fed slot antenna for ultra wide band applications

A printed compact coplanar waveguide fed triangular slot antenna for ultra wide band (UWB) communication systems is presented. The antenna comprises of a triangular slot loaded ground plane with a T shaped strip radiator to enhance the bandwidth and radiation. This compact antenna has a dimension of 26 mm × 26 mm when printed on a substrate of dielectric constant 4.4 and thickness 1.6 mm. Design equations are implemented and validated for different substrates. The pulse distortion is insignificant and is verified by the measured antenna performance with high signal fidelity and virtually steady group delay. The simulation and experiment reveal that the proposed antenna exhibits good impedance match, stable radiation patterns and constant gain and group delay over the entire operating band.     

具有双陷波特性的UWB-MIMO天线

提出了一款具有双陷波特性的紧凑型超宽带多输入多输出(ultra wideband multiple-input multiple-output, UWB-MIMO)天线. 天线由两个辐射元件组成,整体尺寸为41 mm×25 mm×1.6 mm. 通过在天线的接地平面中引入两个叠加的T型结构获得良好的隔离度;同时,通过在天线上刻蚀C型槽和U型槽实现双陷波特性,有效抑制了无线局域网(wireless local area networks, WLAN)和X波段通信卫星的干扰;并从表面电流分布的角度分析了陷波原理. 实验结果表明:所设计的MIMO天线的阻抗带宽为2.8~13.4 GHz,两个陷波频带分别为4.8~5.94 GHz和6.9~8.23 GHz;在整个工作带宽内,隔离度大于15 dB. 说明MIMO天线具有良好的辐射特性、稳定的增益和较低的包络相关系数(envelope correlation coefficient, ECC)(<0.1),适用于UWB-MIMO系统应用.     

一种小型化的高隔离度UWB-MIMO天线

提出了一种紧凑、高性能、形状新颖的具有高隔离度的超宽带多输入多输出(ultra-wideband multiple-input multiple-output, UWB-MIMO)天线.天线由两个圆形辐射元件组成,享有共同的类F形接地平面,尺寸为30 mm×18 mm.在天线的接地平面中引入类F形短截线,在MIMO天线元件之间产生高度隔离.所设计的UWB-MIMO天线具有极低耦合(S₂₁<-22 dB)、低包络相关系数(ECC<0.003)、高分集增益(DG>9.98 dB),适用于便携式通信设备.     

Printed elliptical monopole with shaped ground plane for pattern stability

A novel planar elliptical disc monopole antenna for universal mobile communication systems (UMTS) and ultra-wideband (UWB) dual network applications is presented. Printed on a FR4 dielectric substrate and excited by a microstrip transmission line, the antenna has a shaped ground plane featuring a wide impedance bandwidth with excellent omnidirectional pattern stability.     

Compact body-worn MIMO antenna with high port isolation for UWB applications

This article investigates the mutual coupling reduction of a compact two elements wearable ultra-wideband (UWB) multiple-input multiple-output (MIMO) antenna. The ground plane of the proposed wearable MIMO antenna structure consists of three connected square ring-shaped stubs and two rectangular slots of narrow height. These ground stubs and slots minimize the mutual coupling effect between antennas and provide high isolation. The suggested MIMO antenna functions from the 1.87 to 13.82 GHz frequency spectrum covering WLAN (2.4–2.484 GHz), UWB (3.1–10.6 GHz), and X band (8–12 GHz) with 152.32% fractional bandwidth. It sustains port isolation above 27 dB throughout the 2 to 13.82 GHz frequency band. Inside the whole working frequency band, the suggested antenna offers a tiny envelope correlation coefficient (ECC < 0.098), greater diversity gain (DG > 9.93 dB), minimum channel capacity loss (CCL < 0.32 bits/s/Hz), and slight magnitude variation in mean effective gain of antenna ports (< 0.1 dB). The recommended antenna yields a SAR level below the designated threshold (<1.6 W/kg), affirming its suitability for body-worn applications. The designed MIMO antenna structure has an overall volume of 32 × 48 × 1.5 mm³.     

Bandwidth and frequency agile MIMO antenna for cognitive vehicular communications

A reconfigurable MIMO antenna for heterogeneous vehicular networks is reported in this paper. The frequency and bandwidth characteristics of the MIMO antenna can be reconfigured to meet multi-standard and multi-frequency requirements in automobiles. The antenna element evolved from an edge-chamfered ultra-wideband (UWB) antenna operating from 2.1 to >15 GHz. The bandwidth reconfiguration is achieved through the selection of excitation paths connecting the feed and radiator. The feedline selection is performed using PIN diodes, making the antenna operate in three distinct modes, namely, UWB mode (Mode 1: 2.1–>15 GHz), industrial, scientific and medical/Internet of Things (ISM/IoT) mode (Mode 2: 2.45 GHz), and wireless local area network (WLAN) mode (Mode 3: 5–6 GHz). The feed path corresponding to Mode 2 and Mode 3 is incorporated with a suitable filtering network to shape the frequency response of the antenna based on the user's requirements. Owing to the requirement of cognitive selection of frequency bands, the frequency tunability in Mode 2 is realized using varactor diodes. The varactor-incorporated feed path reconfigures the center frequency between 2.45 and 3.5 GHz. The proposed MIMO antenna offers gain and total efficiency greater than 2.94 dBi and 76%, respectively. The prototype of the 4-port MIMO antenna is being fabricated to test its functionality in real time.     

A reconfigurable wideband MIMO antenna combines RF energy harvesting

This article introduces a novel and groundbreaking approach combining multiple-input-multiple-output (MIMO) technology with radio frequency (RF) energy harvesting. The proposed antenna consists of two semi-circular monopole antenna components, optimized with dimensions of 89 × 51.02 × 1.6 mm³, that share a common ground plane to achieve MIMO characteristics. A series of split-ring resonators on the ground plane significantly enhances the isolation between the two radiating components. Band-notched features are performed in the 3.5 GHz WiMAX and 5.5 GHz WLAN bands through modified C-shaped slots in the radiating patch and two rectangular split-ring resonators serving as parasitic devices near the feed line. The reconfiguration of band-notching is made possible by controlling the modes of the embedded PIN diodes. The two antenna elements maintain mutual coupling below −18 dB from 1.5–13 GHz, achieving an impressive 158.62% impedance bandwidth. The antenna's efficiency and gain experience significant drop, indicating effective interference suppression at the center frequencies of the notch bands, and its performance in MIMO systems is assessed through parameters including envelope correlation coefficient, port isolation, radiation patterns, efficiency, gain, and diversity gain. The simulated properties of the designed antenna closely align with the measured outcomes, demonstrating its reliability and consistency. Moreover, the article evaluates the antenna's potential for RF energy harvesting, achieving a maximum harvested energy of 4.88 V. This proposed antenna can be used in multiple applications, like wideband, band-notching MIMO, and RF energy harvesting. This proposed antenna is an efficient, reconfigurable wideband MIMO antenna with novel RF energy harvesting capability.     

一种面向5G通信的宽带8单元MIMO天线设计

提出了一种面向5G的宽带8端口多输入多输出（multiple-input multiple-output,MIMO）天线.天线单元采用多枝节单极子结构,能够激发多模态,且能覆盖多频段.同时,采用弯折结构来实现小型化,且在相邻单元之间设计T形突出地结构来提高隔离度.仿真和实测结果显示,该天线在3~7.1 GHz内回波损耗大于10 dB,在3.3~7.1 GHz内隔离度高于15 dB.因为进行了有效的去耦,天线体现出明显的辐射分集特性,天线在目标sub-6 GHz频段内的包络相关系数（envelope correlation coefficient,ECC）接近0.在一8×8 MIMO系统中,计算得到的峰值遍历信道容量为43 bps/Hz,达到传统2×2 MIMO上限值的3.74倍.该8单元MIMO天线具有良好的分集和复用能力,能满足5G通信在sub-6 GHz的高速数据传输需要.     

Design of novel compact eight-element lotus shaped UWB-MIMO antenna with triple-notch characteristics on hollow substrate

The design of novel compact two-element and eight-element lotus shaped multiple-input-multiple-output (MIMO) antenna system employing pattern diversity with enhanced isolation characteristics is presented. The proposed two-element antenna system is arranged rotationally on a square-hollow substrate resulting in an eight-element MIMO antenna system employing pattern diversity. The developed eight-element MIMO antenna system resonates in the frequency range 3.1 to 14.6 GHz housing the complete UWB band with triple band-notch characteristics at 3.7–4.5 GHz (C-band satellite down link [3.7–4.2 GHz]), 5.1–5.9 GHz (WLAN) and 6.8–8.25 GHz (X-band satellite down link (7.25–7.75 GHz) and up link (7.9–8.4 GHz)) bands. The antenna system gives element-to-element isolation of more than 25 dB in the majority of the operating band with a peak gain of 6.8 dBi and a maximum 90% efficiency. The important MIMO metrics like ECC (envelope correlation coefficient), DG (diversity gain), total active reflection coefficient (TARC), channel capacity losses (CCL) and MEG (mean effective gain) are presented for both two-element and eight-element to estimate the performance the proposed antennas in multi-antenna environments. The both two- and eight-element designs are fabricated and the measured results of those are well agreed with simulation results.     

3.6-GHz eight-antenna MIMO array for mobile terminal applications

This paper studies an eight-antenna multiple input and multiple output (MIMO) array owning a wide bandwidth to cover the 3.6-GHz (3400–3800 MHz) band for modern mobile terminal applications. The developed eight-antenna array consists of two four-antenna sub-arrays having slight different physical dimensions. The antenna elements are all based on the stepped impedance resonator (SIR) structure, which are positioned along the two long borderlines of the ground plane in the mobile terminal. A wider bandwidth can be realized by properly choosing the electrical length ratio and impedance ratio of the SIR structure, and the system performance can be consequently improved. The measured results of the fabricated prototype show that the value of the return loss is larger than 10 dB and the value of the inter-element isolation is more than 11.7 dB within the entire 3.6-GHz band. Furthermore, the envelop correlation coefficient (ECC) between arbitrary two antenna elements is smaller than 0.1 for the developed eight-antenna MIMO array. Design details of the MIMO array as well as the simulated and experimental results will be given and discussed.     

一种超宽带地板开槽单极子天线的设计

研制了一款超宽带印刷单极子天线。通过在接地板和单极子贴片底部开槽,展宽了天线频带,改善了天线带内特性,提高了天线增益。采用HFSS软件进行仿真,对天线模型参数进行优化,达到最佳设计效果。结果表明,改进后的天线-10 dB阻抗带宽为2.2~14.6 GHz,比原不开槽天线的-10 dB阻抗带宽增加了7.2 GHz。天线实现了小型化超宽带的同时,在整个超宽带匹配频段内,具有良好的驻波和方向图特性,在超宽带设备中有着很好的应用前景。